is it built a video camera in the hp mini?

Similar Questions

• I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

  I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

  If you are running Windows XP... There is a slight chance
  that by running the following command would be the fix:

  Reach... Start / run... and type or copy / paste the following text:

  regsvr32 %windir%\system32\qdv.dll

  Then... Press on... Come in...

  You should see a dialog box stating:

  DllRegisterServer in C:\WINDOWS\system32\qdv.dll successful

  Good luck...

  There is debate on this subject in the following forum:

  Windows Movie Makers Forums
  An unknown error has occurred

• K3 Note M Android Update Bug: video camera on the App Hangouts is too dark

  Hello

  After the upgrade to K3 Note Mobile Android m, for video calls using Google Hangouts, (video) camera is too dark. Please fix as soon as POSSIBLE.

  Even tried after reboot phone. Always the same.

  K3 Note users upgraded to Android Mr. Please post your experiences on meeting places...

  Kind regards

  YUVA.

  This problem is resolved after 13MB update.

• Move video video cam on the DRIVE - best method

  I want to move/copy on 15 Hi8 fron of Hi8 (Sony HandyCam DCR TRV-320) video tapes to a digital format for example AVI or what would work well. My Sony camera still works, I have several fast computers with firewire connections. I want to record video and audio with one of the following configurations; (The reason for which the following software is listed is I currently admit.) Thanks for everything - all help

  Suggestions are appreciated. Thank you.

  (1)-> 1394 VideoCam-> Pinnicle Studio DV 1.26 v or?

  (2)-> 1394 VideoCam-> NERO MediaHome or?

  (3)->-> DIVX 1394 VideoCam?

  Suggestions are appreciated. Thank you.

  Hi8 is analog, so you need some kind of analogous to the conversion device digital Hi8 camcorder with firewire to the computer entry.

  You can play the Hi8 tapes in camcorder digital8 connected FireWire, which uses the camcorder digital8 to convert... or connect the camcorder Hi8 to a digital camcorder that has analog inputs and a function "pass-through" to perform the conversion on the fly.
  Bottom line... you need a black box of a certain type to get from analog to digital.

• Video camera for the blackBerry Passport settings

  Hello all, I recorded a video of a presentation that I had to send off... total total 2 min 28 sec .ideo parameters were HDR ON... VIDEO SIZE was set at 1080 p at 60 frames per second.

  I have treid emailing but that said it was too long to 256 MB & only 16 MB... send 15 seconds worth... tried sending via WhatsApp & exactly the same problem.

  I tried HDR OFF & 720 p but exactly the same problems... am I missing something or is this normal?

  Thanks in advance

  Video HD uses a large amount of data and it is normal that you cannot send an e-mail

  I use box or Drop to synchronize with cloud and then send a link to them

• Driver corder CAM for the HP mini 210-1076NR o/s model is Windows 7 Starter 32-bit version.

  He is the girl's computer. HPmini 210-1076NR. Windows 7 Starter 32-bit o/s. I can't the dashboard camera to work. I looked on the website of HP and you can't find a referance to this driver anywhere. Does anyone have information on this situation?

  Hello

  Follow this link:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-84501-1&CC=US&DLC=en&LC=en&os=4062&Product=4142870&sw_lang=

  If this response help click in congratulations to the tanks.

  Tanks

• Unable to adjust the video camera

  I can't set my video cam. The image is blurry and has spots

  Original title: my video cam. / I can't adjust my video cam. The image is blurry and has spots

  Hello

   
  1. What is the brand and model of the computer?

  2. What is the status of the webcam in Device Manager?

  Reference:
  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager
  
  3. it worked before?
  4. doesn't this problem occurs when you use the webcam with any particular application? (For example: Skype, MSN)?
  5. do you receive any error messages?
  6. is the built-in video cam to the computer or external? If it is external, is it connected via USB?
   

  Make sure that these things when you take a picture.

  
  a. increase the lighting on your desktop or in the area where you want to use the webcam. Additional light will provide photo taking images correctly and reduce the blur in images.

  b. replace the camera lenses so that sufficient distance to capture the images correctly. This is particularly useful for webcams that have a fixed focal length.

   
  I suggest you provide more information about the issue so that we can better help you.
  "Your question contains all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help. »
  See this link for more information on:
  http://support.Microsoft.com/kb/555375
  
   

• Image playback of video camera on my laptop.

  I am a baseball coach and want the video a players swing, then play on my laptop to have a bigger screen.  I want to just save the images, and then connect the video camera to the laptop via USB, then push play on the camera and see the images on the laptop.

  Is there a software out there that will get there?  What I need to do is act like a bigger screen for the camera.

  My camera is a panasonic PV-GS300 and I am running windows 7 on my HP Pavilion Entertainment laptop.

  Thank you!!!

  I am a baseball coach and want the video a players swing, then play on my laptop to have a bigger screen.  I want to just save the images, and then connect the video camera to the laptop via USB, then push play on the camera and see the images on the laptop.

  Is there a software out there that will get there?  What I need to do is act like a bigger screen for the camera.

  My camera is a panasonic PV-GS300 and I am running windows 7 on my HP Pavilion Entertainment laptop.

  Thank you!!!

  ================================
  I think that you will need to download the video
  your hard drive before looking at one.

  Perhaps the following goods range offers a few ideas:

  Import video from a video camera digital
  http://help.live.com/help.aspx?market=en-IE&project=WL_Movie_Makerv1&querytype=topic&query=WL_Movie_Maker_PROC_ImportFromVideoCamera.htm

  How to import videos in Windows Live Movie Maker
  http://www.Dummies.com/how-to/content/how-to-import-videos-into-Windows-Live-Movie-Maker.Navid-323836.html

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Video camera blackBerry Smartphones upgraded to version 4.5 now does not work

  I have a Curve 8330 and updated the software to 4.5. Now I have no video camera if the camera works fine. Any ideas? Thank you!

  Kieran

  Well, that's interesting. I removed the Documents to Go, which I didn't originally. Now, I have my video back. Weird. Besides, I am a newbie of Berry. I'll teach

• I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

  I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

  Hello mpm068,

  Thank you for using communities of Apple Support.

  Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Take care.

• My camera iPhone 5s is accessed remotely? Whenever I use my phone torch ends up taking videos. Is it possible for a person to access my camera through the torch. We share the same Apple ID

  My camera iPhone 5s is accessed remotely? Whenever I use my phone torch ends up taking videos. Is it possible for a person to access my camera through the torch. We share the same Apple ID

  N °

  but maybe you tap the camera icon (bottom-right) when you press the icon of the torch (with the other hand maybe?)

• Built-in BD and video player on the Internet

  I recently got a KDL-32EX40B TV with BD and video Internet player. Although slow to start using N of Sony wireless adapter, it seemed to work OK once I've manually updated the firmware to version PKG4.081AAB (NetFlix wouldn't work at all before this update, and the feature of automatic update in the game told me that the 3 something version was later if no update was necessary).

  In fact, it worked OK until it didn't. Would come and bring some TV station was tuned to the TV, but when you press 'Home' or 'Internet Video', he would just stand there until a message informed me that he was turned on. Later another message saying that it has detected a USB wireless device. Then after awhile, I could press 'Home' or 'Internet Video' and he would take me to the home screen where finally the icons would appear. Pressing NetFlix slowly take me to NetFlix where I could choose something. When the show came (after the 'Connection', 'Control link speed,' messages 'Connection' and 'Reconnect'), the information bar on the top and on the bottom of the screen progress bar would not go far and after about 10 seconds the TV turns off and everything started again. 10 minutes full ten seconds of NetFlix.

  By trial and error, I discovered that this has happened when my wife left a DVD in the player integrated comics. Remove the DVD and restart the TV appears to work correctly. It was only yesterday, so let's see what's happening today or the next few days.

  It is a programming problem in the firmware for sure. It is also something that should be documented if necessary being the culprit. If not leave a DVD in player results in no video problem Internet more, I'll Growl but tolerate it. If the problem returns, I return all since I only got it for a little over a week.

  It has not been wired or wireless, but I find the question. I use a router D - Link DIR - 855 dual band 4 gigabit ports. It is not a dedicated media streamer or DLNA certified device. That shouldn't matter, but it could. I checked the advanced configuration of the router settings and found a box for ' Enable UPnP. It has not been verified, if I checked it, rebooted the router and the problem of Netflix to freezing and crashing while a DVD was still in the TV went off.

  Knowing not enough about what enabling UPnP, I can only say it seems to make a difference. If you discover in your labs that you can reproduce this problem, it might be interesting to note something on the routers in your FAQ. If you can't reproduce, then clearly it's black magic and I need to spend more time learning the secret incantations.

  With respect to the update of the firmware, it has been updated automatically, and he did as soon as I'm the wireless enabled in TV. But he upgraded to an older version that you have available for download. He had been in place for several days until I've manually updated, so it wasn't like I had not given the time. I also made sure the TV to search for updates before I flashed to via the key USB and TV told me I had the latest version already installed but it was clearly not the strength. Flashing the update firmware well and solved the problems I described in my first post.

  Thank you.

  Peter

• Blue screen with the error ativvaxx.dll connecting video cam - Satellite A100

  Hi, whenever I connect my video cam, my system will crash and I get a blue screen saying there is a problem caused by ativvaxx.dll. Any of you guys knows how to solve this problem? I have a Satellite A100 system, it is new. Any help is appreciated.
  Thank you.

  Cool that you have solved the problem and thanks for the info. Perhaps, it might be useful for other users.

• acquisition and video recording of the camera

  Hello world

  I developed a VI to acquire and record the video with my camera. For now check in is every time I run the VI but not know that I try to implemant it is able to record video only when I press the button "Save". The first results are good, I can get the video and display it on the screen with or without saving it. I can record the video by pressing the right button while it on the screen. But in the economy, the displayed video is listening (delay, changing color, etc.) and then I opened my .avi file, I had the same problem.

  Do you know where it comes from.

  Sincerely,.

  Julien

  Can you post a snippet/VI where you save it and view operation. Long back, I had the same problem with a video capture of web cam but resolved some how.

• Problem reading video image from the camera IP Axis - confusion of variant data buffer.

  Hi there;

  I am writing a VI for an Axis IP camera.  He went to work, but I need to extract individual video stream images so I can overlay text using the functions of text IMAQ overlay.

  The thing is when I take a picture using the axis dll library (GetCurrentFrame), it returns a buffer size and a Variant representing the raster data.  The data is = 921 640 bytes representing a 40 byte header, and then the 640 x 480 x 3 raster data.  When I run the vi, I get a correct value for the size of the buffer (921 640) so I know it works.

  What don't understand me, it's the video image is placed in a buffer of type variant.   I don't quite know how to extract the raster data of the data type of "buffer" which is a type variant.  My apologies, I'm a bit ignorant in how to handle the types of "Variant".

  Does anyone have a suggestion?

  This is the VI

  Hi Peter,.

  Just to confirm, what IMAQdx version do you use?  You want to get the version 2010.3 since it is the latest version: http://joule.ni.com/nidu/cds/view/p/id/1641/lang/en

  The next issue would be that the Ethernet cameras discover is not necessary and that it is only used for GigE Vision cameras. The VI was named before IP camera support has been added and the name is unfortunately confusing now. In any case, the discovery of cameras takes place in the background and is automatic. The VI list must list your camera. It may be worth trying just to see if the camera appears in first MAX. Note that the IP camera must be installed on your local subnet, so it can be discovered.

  Regarding the examples, virtually none of the IMAQdx examples included in help-> find examples should work.

  Eric