Built-in BD and video player on the Internet

I recently got a KDL-32EX40B TV with BD and video Internet player. Although slow to start using N of Sony wireless adapter, it seemed to work OK once I've manually updated the firmware to version PKG4.081AAB (NetFlix wouldn't work at all before this update, and the feature of automatic update in the game told me that the 3 something version was later if no update was necessary).

In fact, it worked OK until it didn't. Would come and bring some TV station was tuned to the TV, but when you press 'Home' or 'Internet Video', he would just stand there until a message informed me that he was turned on. Later another message saying that it has detected a USB wireless device. Then after awhile, I could press 'Home' or 'Internet Video' and he would take me to the home screen where finally the icons would appear. Pressing NetFlix slowly take me to NetFlix where I could choose something. When the show came (after the 'Connection', 'Control link speed,' messages 'Connection' and 'Reconnect'), the information bar on the top and on the bottom of the screen progress bar would not go far and after about 10 seconds the TV turns off and everything started again. 10 minutes full ten seconds of NetFlix.

By trial and error, I discovered that this has happened when my wife left a DVD in the player integrated comics. Remove the DVD and restart the TV appears to work correctly. It was only yesterday, so let's see what's happening today or the next few days.

It is a programming problem in the firmware for sure. It is also something that should be documented if necessary being the culprit. If not leave a DVD in player results in no video problem Internet more, I'll Growl but tolerate it. If the problem returns, I return all since I only got it for a little over a week.

It has not been wired or wireless, but I find the question. I use a router D - Link DIR - 855 dual band 4 gigabit ports. It is not a dedicated media streamer or DLNA certified device. That shouldn't matter, but it could. I checked the advanced configuration of the router settings and found a box for ' Enable UPnP. It has not been verified, if I checked it, rebooted the router and the problem of Netflix to freezing and crashing while a DVD was still in the TV went off.

Knowing not enough about what enabling UPnP, I can only say it seems to make a difference. If you discover in your labs that you can reproduce this problem, it might be interesting to note something on the routers in your FAQ. If you can't reproduce, then clearly it's black magic and I need to spend more time learning the secret incantations.

With respect to the update of the firmware, it has been updated automatically, and he did as soon as I'm the wireless enabled in TV. But he upgraded to an older version that you have available for download. He had been in place for several days until I've manually updated, so it wasn't like I had not given the time. I also made sure the TV to search for updates before I flashed to via the key USB and TV told me I had the latest version already installed but it was clearly not the strength. Flashing the update firmware well and solved the problems I described in my first post.

Thank you.

Peter

Tags: Sony TV

Similar Questions

  • BlackBerry Smartphones Just accepts updates my Blackberry Desktop and all THE Photo and video recorded on the Media Manager went

    Hello! I just accepted updates my Blackberry Desktop includes all Blackberry Desktop manager treats me like a new. And freaked out as all THE Photo and video recorded on the old Media Manager Media Manager are worth more than 3 years gone-Its photos and videos that I have stored on the Blackberry Desktop that existed before the update

    Really freaked out because these photos are irrepalcable would appreciate advice thanks

    Hello

    Have you checked to see if the pictures are found in your Documents folder by browsing until then on your computer system?

    What version of the Desktop software update you? Select the [?] is the top right and select "on BlackBerry Desktop Software. Version 7.1.0. ? or 7.0.0. ? or 6.1.0. ?

  • My computer crashes whenever I try to play a video clip from the internet. I have to disconnect the plug to escape. What can I do? Thank you

    My computer crashes whenever I try to play a video clip from the internet. I have to disconnect the plug to escape. What can I do? Thank you

    There is a lot of noise from speakers as well.

    Disable the hardware accelerator or install flash player 10.

  • I try to enable Microsoft XP on a laptop and can't access the Internet to activate.

    I try to enable Microsoft XP on a laptop and can't access the Internet to activate. I have 8 sets of code available, but the phone activation computer said that the codes were not recorded. I need to save this software to get this laptop for my daughter. I can't download and upload diagnostics using my computer. All I get is the splash screen, click the user, and then it will activate the windows screen. When I can't activate online, it suits me and turns off. What else is there to say?

    Of course, you can get online with something :)

    Download the tool on your current computer and transfer it to the affected - save the output in a Notepad TXT file and copy to your functional PC, and then copy the ocntent you your answer.

  • What happens if you use your computer, updatesare being downloaded, and you disconnect from the internet?

    What happens if you use your computer, updatesare being downloaded, and you disconnect from the internet?

    Nothing happens.  The download is incomplete and the updates are not installed.  The next time you go on the site to update or the next time that your automatic updates are are that the updates will be downloaded again.

    John

  • Vista Home Premium gives the message "linked to limited accessibility" and I cannot access the internet.

    I have Vista Home Premium and trying to connect to a WiFi spot, I get the message "linked to limited accessibility" and I cannot access the internet. I understand this is common for Vista and there is a fix for this problem, but want to make sure that I get the right one and can't seem to find anything referring to this issue on the Microsoft site

    Hello

    This problem happens only when connecting to a particular place for the WiFi?

    You can follow the suggestions and check out them.

    Method 1

    You can read the article.

    Message when a device on a Windows Vista-based computer uses a network bridge to access the network: "connected with limited access".

    http://support.Microsoft.com/kb/930517

    Method 2

    Disable IPv6.

    Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

    NOTE: You should do this for each network connection.

    Method 3

    Temporary disable your security software.

    Disable the antivirus software

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Enable or disable Windows Firewall

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

    Note: Software antivirus and firewall can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attack.

    Method 4

    You can reset the TCP/IP stack.

    How to reset the Protocol Internet (TCP/IP)

    http://support.Microsoft.com/kb/299357

  • Screen shuddered up and down when on the Internet.

    Original title: monitor quivers up and down

    Watch the flutters up and down when on the internet.  no flicker in offline mode

    Hello
     
    1. what browser do you use?
    2. it happens when you visit a particular Web site, or on any websites?
    3 does the problem occur when you access the Explorer?
    4. you remember of any changes to your machine before the question?
    5. are you able to access other applications normally when connected to the Internet?
     
    I suggest you to Update the Chipset drivers and see if it works very well.
     
    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • block all users: I'll be out of town for a few days and I would block all my personal files and folders again, leaving the internet open to all users

    I'll be out of town for a few days and I would block all my personal files and folders again, let the internet open to all users.

    How I do.

    Thanks for any help!

    I'll be out of town for a few days and I would block all my personal files and folders again, let the internet open to all users.

    How I do.

    Thanks for any help!

    You mean that other users do not have their own user accounts?
    They all connect to your own account?

    If they all have their own user account to log on, they can't see your personal files, unless...
    1. your files in public folders.
    2. they have your password to login to your own account.

    So, please clarify.

    t-4-2

  • Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

    I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

    Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

    Hello

    I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Disable the anti-virus software

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Enable or disable Windows Firewall

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

    For reference:

    Set up a computer-to-computer (ad hoc) network

    http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

    Note: The notes section through the link above.

  • Windows 8 "not connected to the network" but it is, shows computers and can connect to the internet. How can I fix it

    I used the Windows 8 Pro Upgrade on a Windoxs XP pro installation.  Everything works except that the network and sharing Center indicates that the computer is not connected to a network, but it is.  I can files in front on other computers on the network (at home) and I can access the internet.  The active profile is public, although it should be private. I created this to access the homegroup during installation.

    I'm trying to get a first HD Homerun operation and if Media Center does not have any network, he sees no tuner either.

    What can I do to get this working properly.

    a. no red X

    1. I tried to download a different driver, but it didn't work at all so cancelled.  To check if it was a pilot, I bought a usb wireless adapter.  I've disabled the ethernet connection and used the wireless connection.  The results are the same regardless of which connection I use.

    2. ran every convenience store without success

    3. services were what they were supposed to be

    4 safe mode is worse.  No network connection (cannot see other computers in all), although internet is accessible

    5 start gives the same results. "You are not connected to a network" yet the computers on the network are visible and accessible top records.  Internet is available.

    I installed the software very little on this computer (just installed Win 8 last week.)

    The only installed software is software HP Officejet L7680, Brother HL5250DN & first Silicon Dust HD Homerun software driver. I'm trying to set up basically as a DVR, so very little will be on it.

    The only thing I can think is that I started with the installation of XP has been implemented using a VPN to connect to our network at work. This means that the computer should be part of the field it. Is it possible victory 8 retrieves these settings and now here's what's causing my problems? (I think that very few came from an installation of XP, but I noticed that some parameters met).

    I plan to start again and re-installed Win 8 a last ditch effort... If you can offer any suggestions on repairing this conditioin, please provide me with the best way to re - install Win 8 as a clean install (without the things I installed). I'll then make sure that the network is working correctly before installing anything.

    *************************************************************************************************************

    A follow-up for this reading. My problem was apparently caused by the upgrade of XP and usinging Dungeon files and SETTINGS. Although there are very limited items brought back an installation of XP, something is buried somewhere off network connections.

    To solve this problem, Windows 8 has a new feature called reset. This essentially Setup all over again if you choose the option to delete files. You must enter the product key again when you do this. This is a clean install.  I had to update the graphics card drivers, add Media Center back, install HD Homerun Prime, run the Advisor of cable, making the TV configuration and finally got it works as I had expected.

  • Do not mistake of working Video Player 'INSTALL the updated DRIVER'

    Original title: I am IMPOSSIBLE to GET MY PLAYER VIDOE to WORK. HAVE HAD SEVERAL MESSAGES, THAT THE LATTER IS SAYS I NEED TO INSTALL A DRIVER UPDATED FOR THE READER. DON'T KNOW WHAT TO DO.
    I had problems using the video player because I had installed Firefox. Looks like everyone says its good but have had no more problems since its start. Just drive does not play. I don't
    know what else need to ask. Am computer stupid...

    Hello

    1. don't you make changes on the computer before the show?
    2. what player do you use?
    3. What is the exact error message that you receive on the computer?
    4. what web browser do you use?

    Method 1:
    If you use Windows Media Player, and then run the fix it and check.
    Solve the problems of Windows Media Player video and other media or library
    http://support.Microsoft.com/mats/windows_media_player_diagnostic/

    Method 2:
    You can update the video car on the manufacturer's Web site and check.

    Method 3:
    If the steps above does not help, then try to uninstall Firefox and check.
    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    Method 4:
    If the problem does not occur after uninstalling Firefox then, you try to install the Firefox to the clean boot.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  • Satellite A200-10 x and video crashes when the volume is high aid

    every time I watch a video, and the volume is above a certain level (not even maxed out) the video begins to freeze and the entire system after that... If I turn down the volume of the small wheel at the front, sometimes he gets after several minutes, but some other times, it shows just the Blue error screen and restarts immediately... I almost tried everything... had more memory (2 GB), formatted and installed win 7 32, installed all the latest drivers for this version of windows...

    I'm totally frustrated with this laptop... He had problems from the beginning, I mean, they have launched it with Vista Home and 1 GB of ram which was simply too small for the system working properly... So they forced just buy you mem more because you wouldn't be able to work.

    If someone knows one any solution please help me

    > I have almost tried everything
    Have you also tried to install original recovery image Toshiba (OS that you got with your laptop) and test it with the factory settings?
    What videos you watch? A few stuff downloaded or original DVD movies?

    When you look at the film and the sound is low is all OK?

    I have Satellite P200 and it's the same as yours, but a bit bigger notebook with 17-inch screen. I have 2 GB of RAM inside, and it works perfectly with original Vista and now Win7 32 bit.

  • acquisition and video recording of the camera

    Hello world

    I developed a VI to acquire and record the video with my camera. For now check in is every time I run the VI but not know that I try to implemant it is able to record video only when I press the button "Save". The first results are good, I can get the video and display it on the screen with or without saving it. I can record the video by pressing the right button while it on the screen. But in the economy, the displayed video is listening (delay, changing color, etc.) and then I opened my .avi file, I had the same problem.

    Do you know where it comes from.

    Sincerely,.

    Julien

    Can you post a snippet/VI where you save it and view operation. Long back, I had the same problem with a video capture of web cam but resolved some how.

  • Video fix on the internet from stop and start, stop and start .__It seems that the buffer stops and starts.

    When I want to watch a video on internet video to stop and start all along.

    When I want to watch a video on internet video to stop and start all along.

    This is usually caused by the speed of download is not unable to cope with the speed of playback, the video must stop from time to time to load more download in a temporary cache. This only happens for some videos or videos? If you have a video problem url, that you can post, anyone here can check for you. If the video is a type of swf/flv files often used by YouTube, MySpace, etc. news organizations you can often allow the video to play completely. Then, without moving away from the page, replay the video. Often, the video will always be in a temporary cache on the computer and will now play without stopping. Now, the videos are not well suited for a connection by modem and require some kind of csble or connection DSL broadband to play well most of the time.

  • All the pictures and videos stored on the previous deskmanager Blackberry phones smart blackBerry disappeared after I have accept updates

    I'd appreciate any advice really - when I was accessing my media on my blackberry Desktop Manager Manager I've been invited to accept updates that I did - it seems to have downloaded a new blackberry desktop and I lost all the photos and vids I stocked up on previous - such a freak out as about 3 years worth of travel and pictures of the family and of the videos stored in my manager of blackberry desktop software

    Appreciate any help thanks

    Anything sync'd through your BDS is stored in a folder somewhere... usually My Documents > my pictures > BlackBerry (or my videos > BlackBerry). It depends on the path specified for the folder when you set up the synchronization of the image.

Maybe you are looking for