Is it OK to FMS2 on the HTTP Server

Similar Questions

• Blocks access to the http server homepage

  I can't seem to find how to block (or redirect away from) the Web Server home page.
  For example:
  A user accesses http://servername:7777 / pls/apex/f? p = 101:1 (a valid url)
  Then they come back to the end of the url to access http://servername:7777
  It's 'Welcome to the Oracle HTTP Server' page of my web server. How to block (or redirect away from) this page?
  I think it should be easy, but I can not find directions on how to do...
  Thank you

  You can change the index.htm file in the htdocs OHS_HOME to do a redirection of metatag like this:

  
  
  

  Or you could put a rule in the httpd.conf file.

  See: http://en.wikipedia.org/wiki/URL_redirection

  Thank you

• URL redirects can be configured with XE, and what is the HTTP Server

  I wish I could the URL redirects. I'm under XE with Application Express 2.1.0.00.39.
  
  I want to be able to have a URL like www.schoolwebsite.com and when the user presses on it - have redirect to the page of the Apex for the application. I thought I had to use a redirect in the configuration file HTTP and that XE used Oracle_HTTP and I have set up this way.
  
  But I can't find an Apache Directory.
  
  1. what HTTP server is used with XE and Application Express 2.1.0.00.39?
  2. can I set up for this type of redirection?
  3. do I need to install a HTTP server for this?
  
  Thank you
  Stephen

  If you want to achieve without a separate http server, follow this discussion:
  Re: Default Page

  Kind regards
  ~ Dietmar.

• Routing of URL of application APEX using the HTTP Server

  Hello
  
  I want to route two URLS for two different applications in one single APEX.
  
  for example
  
  www.mydomain1.com to http://www.mydomain.com/apex/f?p=100 | http://xxx.xxx.xxx.xxx/Apex/f?p=100
  
  www.mydomain2.com to http://www.mydomain.com/apex/f?p=200 | http://xxx.xxx.xxx.xxx/Apex/f?p=200
  
  
  I understand the way to achieve this is second-hand HTTP server... it's very well... it was built and works with standard http.conf
  
  My understanding is that I should add the following to HTTP. CONF
  
  < VirtualHost www.mydomain1.com >
  ServerName www.mydomain1.com
  DocumentRoot "G:/route1.
  < / VirtualHost >
  
  < irtualHost www.mydomain2.com >
  ServerName www.mydomain2.com
  DocumentRoot "G:/route2".
  < VirtualHost >
  
  G:/route1 directory I created a HTML index www.mydomain1.com/apex/f?p=100 redirection file
  G:/route2 directory I created a HTML index www.mydomain1.com/apex/f?p=200 redirection file
  
  
  That I put in place and it works
  
  BUT
  
  I do not look very elegant, time which is a bit slower while he rediects and some firewalls do not rediections
  
  Ideas of improvements or the best way to achieve this is welcome
  
  Thank you
  
  Pete

  Hi Pete,.

  A few different ways to do it, but if you use mod_rewrite, you can use some rewrite rules, for example:

  
  ServerName www.mydomain1.com
  ServerAlias www.mydomain1.com
  
  ProxyPreserveHost On
  RewriteEngine On
  
  RewriteRule ^/$ /pls/apex/f?p=100 [R=301,L]
  
  

  Or if you are using a reverse proxy:

  
  ServerName www.mydomain1.com
  ServerAlias www.mydomain1.com
  
  ProxyPreserveHost On
  RewriteEngine On
  
  RewriteRule ^/$ /pls/apex/f?p=100 [R=301,L]
  
  ProxyPass /pls/apex http://foo:7777/pls/apex
  ProxyPassReverse /pls/apex http://foo:7777/pls/apex
  ProxyPass /i http://foo:7777/i
  ProxyPassReverse /i http://foo:7777/i
  
  

  Hope this helps,

  John.

• Enable the HTTP Server

  I have a Cisco Aironet 3702E and I want to set it up as a standalone unit in my network. This access point is a brand new and has not been deployed in a network and has not been controlled by a CA previously. I tried to find how to enable HTTP on the access point but in vain. And also when I try to run any command to activate the mode I get the following error message:

  AP58f3.9c39.118b #capwap ap hostname CAP3702E
  ERROR! Command is disabled.

  Appreciate if you can point to any documentation that could help to set this access point in ROOT mode and turn on HTTP and configuration of this device.

  Software Cisco IOS, C3700 Software (AP3G2-RCVK9W8-M), Version 15.2 (4) JB1, RELEASE SOFTWARE (fc1)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2013 by Cisco Systems, Inc.
  Updated Sunday, November 16, 13 10:46 by prod_rel_team

  ROM: Bootstrap program is boot loader C3700
  BOOTLDR: C3700 bootloader (BOOT-AP3G2-M) LoaderVersion 15.2 (4) JB, RELEASE SOFTWARE (fc1)

  AP58f3.9c39.118b uptime is 1 hour, 39 minutes
  System to regain the power ROM
  System image file is "flash: / ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx".
  Last reason for reloading:

  Cisco AIR-CAP3702E-E-K9 (PowerPC) Prozesseur (revision A0) 204790K / 57344K bytes of memory.
  Card processor ID FCZ1833J090
  PowerPC CPU at 800 Mhz, the revision number 0 x 2151
  Last reset of tension
  Image LWAPP 7.6.1.118 version
  1 gigabit Ethernet interface

  32K bytes memory simulated by flash not volatile configuration.
  Basic Ethernet MAC address: 58:F3:9 C: 39:11:8 B
  Part number: 73-15397-01
  Kit numbered PCA: 000-00000-00
  Revision number of PCA:
  Serial number of PCB: FOC18255VCM
  Top Assembly part number: 068-05055-01
  Top of page the Assembly serial number: FCZ1833J090
  Top of page revision number: A0
  Product/model number: AIR-CAP3702E-E-K9

   AP58f3.9c39.118b#capwap ap hostname CAP3702E ERROR!!! Command is disabled.

  Your access point is running IOS based controller.  You must convert to load the IOS autonomous.

  By using a TFTP server to revert to a previous version

• Download the file to the http server

  Hello world
  
  In APEX, how can upload a local file or machine image to server http folders?
  
  Thank you

  You can:

  1. create a side process server outside of the Apex, for example
  http://www.w3schools.com/php/php_file_upload.asp

  2 use Apex to download the file on the original Apex glass and have a pl/sql stored procedure to write the BLOB in the file downloaded.

• FRM-10142 the http listener does not work on the name of the computer to the port 80

  Hello

  During the race, the oracle 12 c form a following error message

  FRM-10142 the http listener does not work on the name of the computer to port 80. Please start the receiver or check your preferences of runtime.

  Sandy

  First, you will need to check the SST is running.

  go to admin server url in your browser, click on the target icon that is left top of your admin home go to the http server and then start your ohs1.

  and open your generator of forms go to the updated runtime default url like e.g. OSH, you can find your url such as http://localhost:7777 or http://localhost:7779.

  your full url looks like this format http://localhost:7777/forms/frmservlet or http://localhost:7779/forms/frmservlet.

  Localhost can be your default ip 127.0.0.1 or any static ip 192.0.0.10 address in this format.

• vCOM5: unable to connect to the portal https:/%SERVER%/admin

  Hello guys

  Can someone tell me please in the right direction.

  I can't connect to https:/%SERVER%/admin with the admin im account.

  However I can connect with the https:/%SERVER%/vcops-vsphere admin account

  I tried to reset the password of admin with the password de./resetadminpwd.sh % , but this has not fixed my problem.

  Any help would be greatly appreciated.

  Concerning

  What error/admin gives you?

  Have you tried to log into the shell of vApp using the admin account - lock sometimes has this account and this could be the problem...

  If this is the case have a look here: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2030185

• Changing the Apex of http server scenario or an auditor of XE installation.

  Hello!.
  I installed Oracle 11 g XE. After that, I've updated to Apex 4.2 all it works very well, but... default XE installs and configures apex to use the gateway pl/sql embebed.
  In this scenario, the images are stored directly in the database in oracle XML DB repository. This can be a problem because XE have a limit of 11 GB and my apex application is simple, but it can download images for clients, etc. and in this schenma that the photos will consume space in the database instead of using in the linux file system.
  Can I install the HTTP server in a 11g XE and reconfigure apexr?, or can I change to apache + earphone? or easier... can I download images outside the XML DB in my apex application easily?
  Thank you and sorry for my English.

  I installed Oracle 11 g XE. After that, I've updated to Apex 4.2 all it works very well, but... default XE installs and configures apex to use the gateway pl/sql embebed.

  In this scenario, the images are stored directly in the database in oracle XML DB repository. This can be a problem because XE have a limit of 11 GB and my apex application is simple, but it can download images for clients, etc. and in this schenma that the photos will consume space in the database instead of using in the linux file system.
  Can I install the HTTP server in a 11g XE and reconfigure apexr? >
  As far as I KNOW, the SST is a product authorized, not free. So you can consider this aspect.

  , or can I change to apache + earphone?

  You need a container with ApexListerner JEE, not Apache. Not supported, but a good option is Glassfish Community Server. You can always choose to deploy the Apache, in addition to JEE container, for URL rewriting, etc.

  or easier... can I download images outside the XML DB in my apex application easily?

  EPG is not the fastest server around.
  I'd go with Apache + GF + ApexListener.

  See you soon,.

• Oracle HTTP server on a different machine than the database and APEX

  Hi guys!
  
  I wonder if its possible to have Oracle HTTP Server installed on a different machine then the database and APEX?
  
  With respect,
  
  PsmakR

  Hello

  exactly. Details have recently been examined here: {: identifier of the thread = 1955437}. You will find the link to the license document it.
  But OSH is not only registered with the database. If you have an OAS running somewhere, you can use the HTTP server that comes with this instance for APEX as well.

  Another option could be the APEX listener that runs on (almost) any J2EE container. The officially supported include the embedded GlassFish and the Open Source Edition of GlassFish, who both don't need no extra license.

  -Udo

• Where can I download the Oracle HTTP Server?

  Friends,
  
  Hope you can help me with a problem installing of Apex.
  
  I just installed the 10.2.04 database for the 64 bit version of Vista (from this link http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10204_winx64_vista_win2k8.html)
  
  Now, I need to install the HTTP server to run Apex. I spent a few hours searching for OTN for her without success! The last time I installed Apex I found the server HTTP has been available on the companion CD, but after downloading the accompanying CD to 10.2.04 I don't see that it is there!
  
  Can someone provide a link to where I could find it?
  
  Thanks in advance.
  
  Concerning
  
  Ian

  Ian

  http://www.Oracle.com/technology/software/products/database/index.html

  Accept the license agreement, then click on see 'All' link under ' Microsoft Windows (32-bit)

  The download for the Oracle HTTP server is to the bottom of the page

  CITY

• WebCenter 12 c ADF UI with HTTP Server

  Hi Experts,

  when I access the request for the UI of the ADF http://Server/WCC using the HTTP, server

  the mouse cursor changes for download and the interface works is not likely.

  THX

  Hello

  I discovered the solution

  I need to change the 'WLCookieName' of 'JSESSIONID' tag to "WCC-ADF-JSESSIONID" confi file from HTTP Server

• Apex images 5 HTTP server problem

  Hi all

  I had an Oracle Apex 5 installed in Oracle Database XE 11 on Windows 7 using EPG. Now, I follow the documentation to configure Oracle HTTP Server with Apex. I used the ofm_webtier_win_11.1.1.7.0_64_disk1_1of1 HTTP server.

  I followed the instructions in the documentation:

  6.5.1 on the Images copy directory

  If you load a new installation or upgrading from a previous version, you must copy the images top level directory of the apex\images Directory, for example C:\TEMP , the location on the file system containing the Oracle home for Oracle HTTP Server.

  and copied images files from C:\oraclexe\apex\images to C:\Middleware\Oracle_WT1\ohs\images.

  After the race localhost:7777/pls/apex is the case:

  

  It's my C:\Middleware\Oracle_WT1\instances\instance1\config\OHS\ohs1\mod_plsql\dads.conf:

  Alias is 'C:\Middleware\Oracle_WT1\ohs\images\ '.

  < apex/pls/location >

  Order deny, allow

  AllowOverride None

  PlsqlDatabaseConnectString localhost:1521:XE ServiceNameFormat

  PlsqlNLSLanguage AMERICAN_AMERICA. AL32UTF8

  PlsqlAuthenticationMode Basic

  SetHandler pls_handler

  PlsqlDocumentTablename wwv_flow_file_objects$

  PlsqlDatabaseUsername APEX_PUBLIC_USER

  Apex PlsqlDefaultPage

  PlsqlDatabasePassword *.

  PlsqlRequestValidationFunction wwv_flow_epg_include_modules.authorize

  PlsqlPathAlias r

  PlsqlPathAliasProcedure wwv_flow.resolve_friendly_url

  Allow all the

  < / location >

  So what don't understand me?

  Hi Pa Przemek,

  I'm going to install Oracle HTTP Server because I want to use "bootstrap" theme of apex - bootstrap.com and in a sample of the application that must be installed there is a substitution string that must indicate the directory on a server with files used by a theme.

  There is no constraint to have OHS installation based to use bootstrap in Oracle APEX. You can have the theme "bootstrap" on any web listener option (i.e. OHS, EPG, ADR), given that you know where to load the required libraries (knowledge/i /) on the configured web server.

  Yes, images directory have been copied properly with this command:

  xcopy/e/i C:\oraclexe\apex\images C:\Middleware\Oracle_WT1\ohs\images

  Change the Alias is 'C:\Middleware\Oracle_WT1\ohs\images' in dads.conf and restart didn't help.

  Then check the logs of OSH for the determination of the error.

  Reference: http://docs.oracle.com/cd/E23943_01/web.1111/e10144/man_logs.htm#HSADM790

  Link that you gave me refers to the different error message. Should I run the apex_epg_config.sql script? Is this relevant also for the HTTP Server installation?

  apex_epg_config. SQL is related to the configuration of Embedded PLSQL Gateway(EPG/internal mod_plsql) as your web server. It is not related to configuring Oracle HTTP Server (external mod_plsql).

  First of all, I would say that fix on what web server option, you will use (OHS/EPG/ADR).

  Reference: choose a Web listening port

  Then go through the steps to install and configure your web listening port:

  • ADR: http://docs.oracle.com/cd/E59726_01/install.50/e39144/listener.htm#HTMIG29143
  • EPG: http://docs.oracle.com/cd/E59726_01/install.50/e39144/epg.htm#HTMIG386
  • SST: http://docs.oracle.com/cd/E59726_01/install.50/e39144/http_server.htm#HTMIG29245

  I hope this helps!

  Kind regards

  Kiran

• Essbase 11.1.2.1 without http server

  Hello
  
  Ive tried to install the stand-alone Essbase 11.1.2.1. And my question is, is it mandatory to go with the http server. Cause under normal circumstances, from the OHS opmn instance starts apache.exe process in my server which we do not want to be running. I came across a few docs and one of Jean post where I found the workaround below.
  
  "To configure the registry of SSP without having to install applications Web Services Foundation:
  
  1.demarrez EPM System Configurator of the command-line, including the option - forceRegistry
  Starting from a console window, change to EPM_ORACLE_HOME/common/config/version_number and enter configtool.bat - forceRegistry.
  On UNIX, change to EPM_ORACLE_HOME/common/config/version_number and then tapez./configtool.sh - forceRegistry. »
  
  This method will ensure that we can run without http server, thus eliminating the process apache.exe to the server?
  
  Thank you

  OPMN is part of the installation of OSH in 11.1.2.1 but this does not mean THAT OHS will run for essbase deployment.
  If you deploy OSH then another service OPMN will be created running OSH.

  Essbase can be started from the command line or Windows OPMN for example service opmn_EPM_

  See you soon

  John
  http://John-goodw

• Download Oracle HTTP Server (OHS)?

  Hi, I am trying to download the Oracle HTTP server (OHS) and its components - anyone happens to know which package I need to download from Oracle E delivery site?
  
  I am trying to download only the HTTP server and so avoid downloading a great fusion middleware install pack (containing Weblogic).
  
  We already have Weblogic (and much more) installed...

  You can use one of the following web servers for this purpose:

• Apache HTTP Server
  
• Oracle HTTP Server
  
• Microsoft Internet Information Server (IIS)
  
• Oracle iPlanet Web Server

  As long as the web server is supported by the web server plugin, it can be used for proxy requests to a Weblogic Cluster. The Guide [url http://docs.oracle.com/cd/E23943_01/web.1111/e16435/overview.htm] Oracle Fusion Middleware by using Web Server 1.1 Plug - Ins® with Oracle WebLogic Server for more information.

  The Oracle HTTP Server is included in the cdrom of 11g of Oracle Fusion Middleware Web Tier utility. It is part of the Oracle Fusion Middleware Media packs. This product can be installed in [url http://docs.oracle.com/cd/E23943_01/doc.1111ways /e14260/overview.htm#CEGBDFHD]two:]

• Stand-alone mode
  
• Oracle Enterprise Manager using Fusion Middleware control

  The first option does not require a WebLogic domain but you will be limited to the command-line to start/stop and maintenance utilities. The 2nd option requires a logical area of the web. Waiting for your decision to install either should the 11g Oracle Fusion Middleware Web Tier utility cdrom or the cdrom of Oracle Fusion Middleware Web Tier utility 11g and Oracle WebLogic Server 11 g 1 generic material and consistency cdrom. You are installing on a separate server anyway and that you do not have a dependency with the WLS 10.3.5 install proxy for them except you so that you can use the components of the 11.1.1.6 Fusion Middleware Media pack that has been released this week:

• Oracle WebLogic Server 11 GR 1 material (10.3.6) generic and consistency
  
• Oracle Fusion Middleware Web Tier utility 11g Patch Set 5 (11.1.1.6.0)

  Thank you
  EJ