Enable the HTTP Server
I have a Cisco Aironet 3702E and I want to set it up as a standalone unit in my network. This access point is a brand new and has not been deployed in a network and has not been controlled by a CA previously. I tried to find how to enable HTTP on the access point but in vain. And also when I try to run any command to activate the mode I get the following error message:
AP58f3.9c39.118b #capwap ap hostname CAP3702E
ERROR! Command is disabled.
Appreciate if you can point to any documentation that could help to set this access point in ROOT mode and turn on HTTP and configuration of this device.
Software Cisco IOS, C3700 Software (AP3G2-RCVK9W8-M), Version 15.2 (4) JB1, RELEASE SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Updated Sunday, November 16, 13 10:46 by prod_rel_team
ROM: Bootstrap program is boot loader C3700
BOOTLDR: C3700 bootloader (BOOT-AP3G2-M) LoaderVersion 15.2 (4) JB, RELEASE SOFTWARE (fc1)
AP58f3.9c39.118b uptime is 1 hour, 39 minutes
System to regain the power ROM
System image file is "flash: / ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx".
Last reason for reloading:
Cisco AIR-CAP3702E-E-K9 (PowerPC) Prozesseur (revision A0) 204790K / 57344K bytes of memory.
Card processor ID FCZ1833J090
PowerPC CPU at 800 Mhz, the revision number 0 x 2151
Last reset of tension
Image LWAPP 7.6.1.118 version
1 gigabit Ethernet interface
32K bytes memory simulated by flash not volatile configuration.
Basic Ethernet MAC address: 58:F3:9 C: 39:11:8 B
Part number: 73-15397-01
Kit numbered PCA: 000-00000-00
Revision number of PCA:
Serial number of PCB: FOC18255VCM
Top Assembly part number: 068-05055-01
Top of page the Assembly serial number: FCZ1833J090
Top of page revision number: A0
Product/model number: AIR-CAP3702E-E-K9
AP58f3.9c39.118b#capwap ap hostname CAP3702E ERROR!!! Command is disabled.
Your access point is running IOS based controller. You must convert to load the IOS autonomous.
By using a TFTP server to revert to a previous version
Tags: Cisco Wireless
Similar Questions
-
Is it OK to FMS2 on the HTTP Server
If you want to FMS2 to accept connections subcutaneous RTMP (on port 80) you have to install on another host of the web server (that is listening for HTTP connections on port 80)?You can install FMS on the same machine, but you'll want to give FMS is the own IP address.
In addition, if you use IIS as the http server, you'll want to set it up so that it is binding on all IP addresses. See the tutorial here:
-
Cannot enable the Web Server (SSL) site on El Cap Server
' tLooking for help here, trying to put in place in El Cap 10.11.3/Server 5.0.15 Web services and the no - SSL server comes just in green in the admn, but the SSL server will not activate. I have an a record for the server to an external DNS server mdm.mycompany.com, and which is mapped to the external IP address of my network. I also have the port forwarding enabled on the router to 80 and 443. Customers outside the network can reach the site at http://mdm.mycompany.com on port 80, but not on 443 as told them the server does not accept unsecured connections. This isn't the same problem when the customer has to trust the certificate; The secure connection is totally denied. My intention here is to activate the Profile Manager, so that I really don't like whether or not the sites work, but the Profile Manager requires a secure connection. I use a cert Self singed at least for testing purposes, but I can't. Imagine that which prevents the site SSL itself allowing all the... Orientation/information appreciated, thank you!
Most of the browsers (and probably accessibility service Apple, aka the green dot) reject/warn self-signed certificates. I would go ahead and obtain a trusted certificate. StartSSL.com offers free class 1 certificates and they work fine.
-
Not able to enable the web server in exe
Hello
I have a problem with starting a web server. I Vi which allow the address of the directory to be published and after that it makes the stream server. And there are a few jpg files and some html files in the directory. And jpg files are attached to html files. And then there are a few vi which adds the other façades Vi:s of images. And that the program runs the image files in the directory on the server are written (updated). So the point is access through a Web browser on the site where some hyperlinks and behind links that there are photos of a few front panels. And my applications automatically updated images.
Problem is that the server will not go when I've built and run the application. In the development environment, it works perfectly. I tried this on another PC too, but the exe will not connect to the server on one of the computers.
Need help, thank you
There is the attached web server startup file.
Version is 8.2
Hello!
http://digital.NI.com/public.nsf/allkb/3B2160B128EE09A886256B60006FFA66
Run in LabVIEW application to run Web server is different from the development environment. Please, look at the link above and try it if she could help you.
ARO
Do Nguyen
National Instruments technical support
-
Blocks access to the http server homepage
I can't seem to find how to block (or redirect away from) the Web Server home page.
For example:
A user accesses http://servername:7777 / pls/apex/f? p = 101:1 (a valid url)
Then they come back to the end of the url to access http://servername:7777
It's 'Welcome to the Oracle HTTP Server' page of my web server. How to block (or redirect away from) this page?
I think it should be easy, but I can not find directions on how to do...
Thank youYou can change the index.htm file in the htdocs OHS_HOME to do a redirection of metatag like this:
Or you could put a rule in the httpd.conf file.
See: http://en.wikipedia.org/wiki/URL_redirection
Thank you
-
URL redirects can be configured with XE, and what is the HTTP Server
I wish I could the URL redirects. I'm under XE with Application Express 2.1.0.00.39.
I want to be able to have a URL like www.schoolwebsite.com and when the user presses on it - have redirect to the page of the Apex for the application. I thought I had to use a redirect in the configuration file HTTP and that XE used Oracle_HTTP and I have set up this way.
But I can't find an Apache Directory.
1. what HTTP server is used with XE and Application Express 2.1.0.00.39?
2. can I set up for this type of redirection?
3. do I need to install a HTTP server for this?
Thank you
StephenIf you want to achieve without a separate http server, follow this discussion:
Re: Default PageKind regards
~ Dietmar. -
Routing of URL of application APEX using the HTTP Server
Hello
I want to route two URLS for two different applications in one single APEX.
for example
www.mydomain1.com to http://www.mydomain.com/apex/f?p=100 | http://xxx.xxx.xxx.xxx/Apex/f?p=100
www.mydomain2.com to http://www.mydomain.com/apex/f?p=200 | http://xxx.xxx.xxx.xxx/Apex/f?p=200
I understand the way to achieve this is second-hand HTTP server... it's very well... it was built and works with standard http.conf
My understanding is that I should add the following to HTTP. CONF
< VirtualHost www.mydomain1.com >
ServerName www.mydomain1.com
DocumentRoot "G:/route1.
< / VirtualHost >
< irtualHost www.mydomain2.com >
ServerName www.mydomain2.com
DocumentRoot "G:/route2".
< VirtualHost >
G:/route1 directory I created a HTML index www.mydomain1.com/apex/f?p=100 redirection file
G:/route2 directory I created a HTML index www.mydomain1.com/apex/f?p=200 redirection file
That I put in place and it works
BUT
I do not look very elegant, time which is a bit slower while he rediects and some firewalls do not rediections
Ideas of improvements or the best way to achieve this is welcome
Thank you
PeteHi Pete,.
A few different ways to do it, but if you use mod_rewrite, you can use some rewrite rules, for example:
ServerName www.mydomain1.com ServerAlias www.mydomain1.com ProxyPreserveHost On RewriteEngine On RewriteRule ^/$ /pls/apex/f?p=100 [R=301,L] Or if you are using a reverse proxy:
ServerName www.mydomain1.com ServerAlias www.mydomain1.com ProxyPreserveHost On RewriteEngine On RewriteRule ^/$ /pls/apex/f?p=100 [R=301,L] ProxyPass /pls/apex http://foo:7777/pls/apex ProxyPassReverse /pls/apex http://foo:7777/pls/apex ProxyPass /i http://foo:7777/i ProxyPassReverse /i http://foo:7777/i Hope this helps,
John.
-
Download the file to the http server
Hello world
In APEX, how can upload a local file or machine image to server http folders?
Thank youYou can:
1. create a side process server outside of the Apex, for example
http://www.w3schools.com/php/php_file_upload.asp2 use Apex to download the file on the original Apex glass and have a pl/sql stored procedure to write the BLOB in the file downloaded.
-
vCOM5: unable to connect to the portal https:/%SERVER%/admin
Hello guys
Can someone tell me please in the right direction.
I can't connect to https:/%SERVER%/admin with the admin im account.
However I can connect with the https:/%SERVER%/vcops-vsphere admin account
I tried to reset the password of admin with the password de./resetadminpwd.sh % , but this has not fixed my problem.
Any help would be greatly appreciated.
Concerning
What error/admin gives you?
Have you tried to log into the shell of vApp using the admin account - lock sometimes has this account and this could be the problem...
If this is the case have a look here: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2030185
-
Changing the Apex of http server scenario or an auditor of XE installation.
Hello!.
I installed Oracle 11 g XE. After that, I've updated to Apex 4.2 all it works very well, but... default XE installs and configures apex to use the gateway pl/sql embebed.
In this scenario, the images are stored directly in the database in oracle XML DB repository. This can be a problem because XE have a limit of 11 GB and my apex application is simple, but it can download images for clients, etc. and in this schenma that the photos will consume space in the database instead of using in the linux file system.
Can I install the HTTP server in a 11g XE and reconfigure apexr?, or can I change to apache + earphone? or easier... can I download images outside the XML DB in my apex application easily?
Thank you and sorry for my English.I installed Oracle 11 g XE. After that, I've updated to Apex 4.2 all it works very well, but... default XE installs and configures apex to use the gateway pl/sql embebed.
In this scenario, the images are stored directly in the database in oracle XML DB repository. This can be a problem because XE have a limit of 11 GB and my apex application is simple, but it can download images for clients, etc. and in this schenma that the photos will consume space in the database instead of using in the linux file system.
Can I install the HTTP server in a 11g XE and reconfigure apexr? >
As far as I KNOW, the SST is a product authorized, not free. So you can consider this aspect., or can I change to apache + earphone?
You need a container with ApexListerner JEE, not Apache. Not supported, but a good option is Glassfish Community Server. You can always choose to deploy the Apache, in addition to JEE container, for URL rewriting, etc.
or easier... can I download images outside the XML DB in my apex application easily?
EPG is not the fastest server around.
I'd go with Apache + GF + ApexListener.See you soon,.
-
Oracle HTTP server on a different machine than the database and APEX
Hi guys!
I wonder if its possible to have Oracle HTTP Server installed on a different machine then the database and APEX?
With respect,
PsmakRHello
exactly. Details have recently been examined here: {: identifier of the thread = 1955437}. You will find the link to the license document it.
But OSH is not only registered with the database. If you have an OAS running somewhere, you can use the HTTP server that comes with this instance for APEX as well.Another option could be the APEX listener that runs on (almost) any J2EE container. The officially supported include the embedded GlassFish and the Open Source Edition of GlassFish, who both don't need no extra license.
-Udo
-
Where can I download the Oracle HTTP Server?
Friends,
Hope you can help me with a problem installing of Apex.
I just installed the 10.2.04 database for the 64 bit version of Vista (from this link http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10204_winx64_vista_win2k8.html)
Now, I need to install the HTTP server to run Apex. I spent a few hours searching for OTN for her without success! The last time I installed Apex I found the server HTTP has been available on the companion CD, but after downloading the accompanying CD to 10.2.04 I don't see that it is there!
Can someone provide a link to where I could find it?
Thanks in advance.
Concerning
IanIan
http://www.Oracle.com/technology/software/products/database/index.html
Accept the license agreement, then click on see 'All' link under ' Microsoft Windows (32-bit)
The download for the Oracle HTTP server is to the bottom of the page
CITY
-
WebCenter 12 c ADF UI with HTTP Server
Hi Experts,
when I access the request for the UI of the ADF http://Server/WCC using the HTTP, server
the mouse cursor changes for download and the interface works is not likely.
THX
Hello
I discovered the solution
I need to change the 'WLCookieName' of 'JSESSIONID' tag to "WCC-ADF-JSESSIONID" confi file from HTTP Server
-
FRM-10142 the http listener does not work on the name of the computer to the port 80
Hello
During the race, the oracle 12 c form a following error message
FRM-10142 the http listener does not work on the name of the computer to port 80. Please start the receiver or check your preferences of runtime.
Sandy
First, you will need to check the SST is running.
go to admin server url in your browser, click on the target icon that is left top of your admin home go to the http server and then start your ohs1.
and open your generator of forms go to the updated runtime default url like e.g. OSH, you can find your url such as http://localhost:7777 or http://localhost:7779.
your full url looks like this format http://localhost:7777/forms/frmservlet or http://localhost:7779/forms/frmservlet.
Localhost can be your default ip 127.0.0.1 or any static ip 192.0.0.10 address in this format.
-
Apex images 5 HTTP server problem
Hi all
I had an Oracle Apex 5 installed in Oracle Database XE 11 on Windows 7 using EPG. Now, I follow the documentation to configure Oracle HTTP Server with Apex. I used the ofm_webtier_win_11.1.1.7.0_64_disk1_1of1 HTTP server.
I followed the instructions in the documentation:
6.5.1 on the Images copy directory
If you load a new installation or upgrading from a previous version, you must copy the
images
top level directory of theapex\images
Directory, for exampleC:\TEMP
, the location on the file system containing the Oracle home for Oracle HTTP Server.and copied images files from C:\oraclexe\apex\images to C:\Middleware\Oracle_WT1\ohs\images.
After the race localhost:7777/pls/apex is the case:
It's my C:\Middleware\Oracle_WT1\instances\instance1\config\OHS\ohs1\mod_plsql\dads.conf:
Alias is 'C:\Middleware\Oracle_WT1\ohs\images\ '.
< apex/pls/location >
Order deny, allow
AllowOverride None
PlsqlDatabaseConnectString localhost:1521:XE ServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA. AL32UTF8
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername APEX_PUBLIC_USER
Apex PlsqlDefaultPage
PlsqlDatabasePassword *.
PlsqlRequestValidationFunction wwv_flow_epg_include_modules.authorize
PlsqlPathAlias r
PlsqlPathAliasProcedure wwv_flow.resolve_friendly_url
Allow all the
< / location >
So what don't understand me?
Hi Pa Przemek,
I'm going to install Oracle HTTP Server because I want to use "bootstrap" theme of apex - bootstrap.com and in a sample of the application that must be installed there is a substitution string that must indicate the directory on a server with files used by a theme.
There is no constraint to have OHS installation based to use bootstrap in Oracle APEX. You can have the theme "bootstrap" on any web listener option (i.e. OHS, EPG, ADR), given that you know where to load the required libraries (knowledge/i /) on the configured web server.
Yes, images directory have been copied properly with this command:
xcopy/e/i C:\oraclexe\apex\images C:\Middleware\Oracle_WT1\ohs\images
Change the Alias is 'C:\Middleware\Oracle_WT1\ohs\images' in dads.conf and restart didn't help.
Then check the logs of OSH for the determination of the error.
Reference: http://docs.oracle.com/cd/E23943_01/web.1111/e10144/man_logs.htm#HSADM790
Link that you gave me refers to the different error message. Should I run the apex_epg_config.sql script? Is this relevant also for the HTTP Server installation?
apex_epg_config. SQL is related to the configuration of Embedded PLSQL Gateway(EPG/internal mod_plsql) as your web server. It is not related to configuring Oracle HTTP Server (external mod_plsql).
First of all, I would say that fix on what web server option, you will use (OHS/EPG/ADR).
Reference: choose a Web listening port
Then go through the steps to install and configure your web listening port:
- ADR: http://docs.oracle.com/cd/E59726_01/install.50/e39144/listener.htm#HTMIG29143
- EPG: http://docs.oracle.com/cd/E59726_01/install.50/e39144/epg.htm#HTMIG386
- SST: http://docs.oracle.com/cd/E59726_01/install.50/e39144/http_server.htm#HTMIG29245
I hope this helps!
Kind regards
Kiran
Maybe you are looking for
-
I enter the code and it sends me to new Firefox Sync
I want to synchronize my desktop to my new laptop. I entered the code the two senses, computer laptop and desk laptop on the desktop, type, then the original Firefox Sync page returns to the top.Directions say "see where I can find the code to add a
-
Problem of satellite a50 wireless LAN
No apparent reason my wire will disable its self. This happens every day and a re-boot will fix it.
-
y at - it an anti malware for os 10.6?
y at - it an anti malware for os 10.6?
-
HP dv6 AMD dual core 64 2.20 GHz SSD Upgrade
Hello, I bought a HP dv6 a few years ago and now what to do an upgrade. and thought to put a 8 GB of RAM and a 500 GB SSD. can I do this? Thanks in advance.
-
"Forefront TMG client is not installed properly.
Hello After you install the Forefront TMG Client, there is an exclamation point on the client and the error "Forefront TMG is not installed correctly" customer. I tried to install the patch 936773, described on the page "http://support.microsoft.com/