Could not find photos Fine Pix from Sony Windows 3

Similar Questions

• Could not find photos and documents after reinstlling windows

  I have rInstaller windows with the provided installation disc with a computer, after installing all my programs, photos and documents had disappeared. How can I find them?

  Depending on how you did the re-setup, they may or may not be recoverable.  The recovery disc that comes with a computer generally makes a boot that erases the hard drive clean of EVERYTHING before you reinstall the system to the factory conditions.  If all of your data and programs are gone, then a new installation is almost certainly what happened.  When you have made you we gave the option ot repair/upgrade your system or only to install it?  Check your C:\ Drive and see if there is a folder named Windows.OLD.  If so, there may be a way to recover your data, but your programs and your settings are gone and needs to be reinstalled or reconfigured.

  I hope this helps.  Let me know if you have a Windows.OLD folder and I will provide assistance to try to recover your data.  If this folder does not exist, then I am sorry to say that your data too has been deleted and disappeared.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Could not find photos after the upgrade to Windows 7

  Bridge worked very well under Vista, but after the upgrade to Windows 7, I can't find one of my photos with bridge files.  Photoshop CS4 find them OK and made Lightroom, but for some reason Bridge does not list the sub folders.  If I click on libraries, he says "no file".  It does not list the pictures or my pictures.  I'm totally stumped.

  AlAugustine wrote:

  I tried all combinations of ctrl-click, click and ctrl, etc, I can think of but nothing reveals the reset box.  When I double click on the desktop icon, it loads almost instantly leaving no time to press ctrl before loading.

  One thing I did not mention, is that you must check that the bridge is already done in the background.  Open the Task Manager and click the processes tab and see if bridge.exe is listed.  If program so quit smoking.

  If you have the possibility of automatically loading at startup deck, I recommend that deactivate you in the Advanced preferences file.  It causes more problems than it solves.

• Could not find photos in the computer anywhere except Windows Media Center.

  Original title: Windows Media Center hides my videos of me?

  I have windows media center, and I imported my blackberry videos. I can't find the videos anywhere on the computer, but when I go to the images on Windows Media Center. It is not sensible, and I can't download videos anywhere because my computer can not find them. Is there anyway to add to the computer and to get them off Media Center? I never got so bad to do something on a computer. I can't believe that the Media Center doesn't let me see the media outside himself. So, if anyone has the answer please help me.

  Hello

  1. what operating system is installed on your computer?

  2. don't you make changes on your computer before this problem?

  You can search pictures by typing the name of the file, or from its tags, file type.

  For more information, refer to this link: How to search for files and folders in Windows XP

  Hope the helps of information.
  Please post back and we do know.

• Could not find photos after download them to my computer

  I downloaded pictures from my phone to my computer and I can't find where they are stored. I went to the library and pictures and they aren't there. What should I do?

  If you know the name of one of the photos that you have transferred to your computer, try performing a search on this image.

  Otherwise, download the photos from the phone again but take note where they are transferred to.

• Could not find photos on external hard drive

  I tried to improve my OS to Windows 10.  He did not, but that's another story.  When I opened my LR5, I couldn't find my photos.  My LR catalog is on my c: drive and my photos are on an external drive.  Any suggestions?

  Hey Sutherland,

  I suggest you to reconnect the images in Lightroom for the original images of your external driver.

  Please take a look at the following article: https://helpx.adobe.com/lightroom/help/locate-missing-photos.html

  Please let us know if it helps.

  Kind regards

  Tanuj Sandal

• Could not find a connector remote desktop in windows xp or I can install it

  Hello world

  I'll try to find mstsc.exe on my computer, so I can connect to another computer in the building, and he's not here, despite being apparently integrated into my version of windows xp, so I downloaded from the microsoft site and, at halfway through the installation, I get an error stating that the program is already installed as built in the part of the operating system , but I can't find it anywhere!
  I'm usually a mac user, this problem is on the computer at work so forgive me for any ignorance, because I haven't used windows in over 6 years.
  Thank you in advance!

  It can be installed on Windows XP Professional

  http://support.Microsoft.com/kb/284931/en-us

  To find the Remote Desktop Connection shortcut, click the button start , click all programs or programs, and then click Accessories. To quickly open remote desktop connection, open the start menu and type mstsc in the search box.

  You can't use Remote Desktop connection to connect to computers running Windows XP Home Edition.

• When you try to perform a factory restore I get this error: "could not find"JScript.Encode"script engine: C:\Windows\Help\OEM\scripts\launche.jse.

  I'm trying to restore my PC to the preassembled initial state

  I followed this as mentioned in the help, but I got this message

  Cannot find "JScript.Encode" script engine

  C:\Windows\Help\OEM\scripts \launche. JSE

  
  

  I use windows Vista

  
  

  So what can I do to restore my system?

  waiting for your support with kindness

  Hello

  There are two ways to do this.

  Most computers these days don't come with recovery discs.

  Instead, computer image makers a recovery Partition on the hard drive in order to reinstall the operating system to.

  That the recovery process says return to factory (new State) settings

  To access the recovery partition, you should be able to find it in the start menu > programs > list of software from the manufacturer of your > search for recovery options.

  A simpler method to start the press a key or sequence of keys at startup (when you start your computer)

  So maybe F10, F11, Alt + F10, etc. depending on your manufacturer.

  You must ask them or online on their website or the Support Forums to know the exact key / s press.

  Another method is to ask them to send you a set of recovery discs, which will do the same.

  They will charge a small cost for this service.

  Back up the data that it will be lost during the recovery process, and all programs that you have installed will need to be reinstalled from the original media (CD, DVD, download Net).

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

• Satellite L300: Could not find burning software after upgrade to Windows 7

  Just do an upgrade and can't find the software CD/DVD burning.
  What it should be and where can I find/reinstall it?

  I think it is Roxio. TIA.

  Hello

  Additional requests from different manufacturers that were pre-installed on computers laptop Toshiba cannot be downloaded because of the licensing problem.
  You can download only the Toshiba software.

  I found the Toshiba Disk Creator on the Canadian driver Toshiba page:
  http://support.Toshiba.ca/support/download/ln_bymodel.asp

  Here you can choose a Satellite L500 for example and you can find the Toshiba Disk Creator for Win 7 32 bit and 64 bit.

  Welcome them

• Could not find the secpol.msc service in Windows 7 Home Premium edition to change user permissions

  Original title: Premium windows 7 inbound secpol.msc return item not found

  Listed as a system administrator, trying to change the permissions of the user,

  entering secpol.msc in the search programs and files, return item was not found

  Hello

  The service is not available in the Home Premium edition and is available only in the Professional Edition and ultimate edition.

   

• I could not find download Windows Mobile Device Center 6.1 so I can download pic & videos from my phone to my computer. I need assistance with their phone is off and on computer any ideas please help.

  I could not find download Windows Mobile Device Center 6.1 so I can download pic & videos from my phone to my computer. I need assistance with their phone is off and on computer any ideas please help.

  See http://support.microsoft.com/kb/931937

• Help! During the new installation of windows 8 from windows 7, received the error message "could not find readers.

  First post: I have a hp Envy 4-1030us ultrabook comes with windows 7.  from 3 months (after about 1 year of use), he started having the BSOD (blue screen of death) to STOP the messages of error 0x0000007e constantly interrupting sessions.  factory reset which has worked for 2 months but started to do it again.  tried the factory reset again, but now he makes mistakes BSOD after 2-10 minutes of use.  I was so fed up that I had a new OEM DVD of windows 8 and try to start it from the external DVD player connected via USB (laptop doesn't have a DVD player in itself).  When I get to the custom installation, without partitions or drives are listed and the error message 'we could not find all the readers'.  Since it is an ultrabook there is a 32 GB SSD and a 500 GB HARD drive.  in windows 7, these discs are seen without problem.  What I am doing wrong?  Why install it windows 8 can't see the internal drives?  Thanks in advance for any help you can give.

  Hello

  See the links below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/Windows-8-install-unable-to-find-my-SSD-hard-drive/e54ff7bc-50a9-4e05-85cd-542ca71f621d

  http://www.eightforums.com/tutorials/9573-SATA-driver-load-Windows-8-Setup.html

• I buy 6 Lightroom from Amazon, received the album, but could not find a SN which will allow me to start the installation.  This sleeve is not, the FN is too short, the other number on the box is only 18 digits.  Help

  I buy 6 Lightroom from Amazon, received the album, but could not find a SN which will allow me to start the installation.  This sleeve is not, the FN is too short, the other number on the box is only 18 digits.  Help

  You posted in the wrong forum, this is the forum of Captivate. Can I move this question to the Lightroom forum?

• Why Ai CC 2014, when I use a pathfinder on two objects tool, their anchor points break a bit from where they were? I search in all the nod to under VIEW options & could not find the culprit. Help, please!

  Why Ai CC 2014, when I use a pathfinder on two objects tool, their anchor points break a bit from where they were? I search in all the nod to under VIEW options & could not find the culprit. Help, please!

  It looks like "snap to grid of pixels" just once more.

  Uncheck the box "align new objects to the pixel grid" in the menu of the transformation Panel.

  Select the objects and uncheck "snap to grid of pixels" in the transformation Panel.

• Impossible to install XP SP3 (could not find the file specified)

  I looked at and followed the steps described in

  Article ID: 950717 - steps to take before you install Windows XP Service Pack 3
   
  I do not have

  • Microsoft Shared Computer Toolkit
  • Pack MUI Remote Desktop Connection (RDP) 6.0 (update 925877 for Windows XP)

  I tried to install SP3 with and without my Antivirus, Antispyware and firewall running programs (several times – 4, 5, or more).  Each time, I get an error staing "could not find the specified file."  Then after being told that SP3 can not be installed and that "Windows XP has been partially updated and may not work properly", I have to restart my system.

  I also followed all the steps in this article (Article ID: 950718 - how to troubleshoot an installation fails in Windows XP Service Pack 3) and still the same thing as above.

   

  I tried to download SP3 directly from the Download Center - same results as before.

   

  I started the BITS service and tried again - same results as above.

   

  I've disabled auto updates and removed to software distribution (download renamed folder as shown) - same results as shown above.

   

  I tried to restore my system to an earlier date - 4 these attempts using different dates and set points during the last wee - ALL have failed.

  I also tried the proposals 1 to 3 in this article (Article ID: 950249-how to remove Windows XP Service Pack 3 from your computer), and none of these steps worked.

  I spent over 8 hours today and yesterday a couple just trying to solve this problem and still don't get anywhere.  I am beyond frustrated at this point.  I know that say Windows can not work properly, and I need my computer to do my job.  Any help would be appreciated.

  You could do a repair installation with a CD of Windows XP with SP3 integrated already.  However, unless this is a new installation that you have installed SP2 on so you could get then SP3 installed on it - you have obviously been broadcast for some time without a lot of fixed security and tastes and your system could very well be stripped because of this.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 11 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you need to do before you install Windows XP SP3:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  Come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.

  Once the computer has been put by the top meat grinder (do it all, like data. even if you JUST did some of them) - download you ' HE Installer "SP3, save it to your desktop, restart and login as an administrator and run this file, following the signs.