is it possible to connect with SSH from router to router?

Similar Questions

• Is it possible to connect with FACEBOOK Customer / Tech Support? I got my ID stolen FB and I can't connect with a living soul!

  Is it possible to connect with FACEBOOK Customer / Tech Support? I got my FB ID stolen and I can't connect with a living soul! I'm really tired of FACEBOOK and ZUCKERBERG, boasts getting its 1 billionth Member, meanwhile, its members have problems with scams, hackers, even FACEBOOK is now BANNING people for the addition of family and friends! This must be a scam any seriously! Im sick of him, he turned my whole as for social networks. If it wasn't for the fact that I have almost all of my family in Europe and around the world all in one place, I would certainly remove my account. The problem with that is if you delete your FACEBOOK PROFILE, you don't actually remove them. FB keeps them because they are the property of Facebook the minute climb you the post! This information is in the conditions of joining Facebook, but not on the registration page! that is wrong with this picture. THEY HAVE NO SUPPORT, NO CUSTOMER SUPPORT, IT IS Y HAS NO PHONE NUMBER YOU CAN CALL TO REPORT YOUR STOLEN ID AND NOW I HAVE TO ALL RUN IT AROUND TO TRY TO FIND A CYBER CRIME UNIT WHO WILL HELP ME! How can the other thing, I know if Mytechgurus.com is a legitimate business. As I've been hacked and my ID stolen (curiously enough all what's happened just as I was banned from Facebook to add a friend, I've not seen in 36 years.) They have deleted my friendship with her and banned me for 7 days)! Facebook. MyTechGurus.com have charged me $700.00 for 2 pc for serivce of 24/7 for 2 years. Granted they have always been there in the last 6 weeks to help with all the problems that the pirate had created. They've phoned while I had a technician remote access online help with verbal information as it was a huge problem. but I put it back now because a governing body here in Australia called SCAM WATCH who is supposed to tell you who is a scam and is not was good enough to tell me that they are there only to report a scam, they can not physically tell you if one of them is actually a scam or not! I was left to literally chasing my own tail! HE IS THERE ANYONE TO HELP ME AT ALL!

  Hello

  Sorry, we can not help except at the point you in the right direction.

  The Microsoft Community is a site of support of peer reviewed for Windows
  and some Microsoft Products and has absolutely no connection or influence
  with Facebook.

  Rob - SpiritX

• Re: Satellite L300 - is there a possibility to connect with TV?

  Hello.
  I want to apologize for my English. It is not my mother tongue.
  When I bought my laptop, I didn't think the connection of it with TV. And that is why I do not pay attention to the lack of HDMI or DVI connectors on my laptop. Maybe someone knows if there is a possibility of connection to the TV. The laptop has only the VGA connector (to connect and an external monitor), microphone, USB connector and Express card slot. My TV (Toshiba AV500PR) has no VGA connector. AR the least VGA connector on it has a description it's a service connector.
  But the main problem is sound. The output signal can be get from microphone connector.

  I hope that someone has already solved this kind of problem.
  Thanks in advance.
  Alexey

  I agree with sanremo. You should buy a VGA adapter cinch set a local computer retailer. Then, you can connect your laptop to the TV.

  I have a Satellite L300 too and the VGA adapter cinch set works perfectly.

• How activate/connect with SSH?

  For Beta3 release notes say is a new feature ' secure connection: you can now connect to the Tablet using Secure Shell (SSH) and download files from your application using SCP and SFTP.

  The simulator of listening on port 22 (the SSH standard) or any other port for SSH connections, with or without active development mode does not have a vanilla installation.

  I found the blackberry connect program in the SDK bin folder and tried this after creating a RSA2 key:

  c:\>blackberry-connect -targetHost 192.168.7.172 -devicePassword x
  PROGRESS: Connecting to target 192.168.7.172:4455
  PROGRESS: Authenticating with target 192.168.7.172:4455
  PROGRESS: Encryption parameters verified
  PROGRESS: Authenticating with target credentials.
  PROGRESS: Successfully authenticated with target credentials.
  PROGRESS: Sending ssh key to target 192.168.7.172:4455
  Connection refused: Invalid ssh key contents.
  The target actively refused the connection. Please ensure that qconnDoor is running on the target.
  PROGRESS: Unable to send ssh key to target
  

  The fichier.ssh/id_rsa.pub is generated as a SSH-1 using PuttyGen key.  I also tried a file SSH-2 RSA with the same results.

  The fact that he said that he "succesfully authenticated" it suggests successfully connected... probably using port 443 (https) the way I guess that deploy blackberry is.  However, after that he seems to say my key is not valid (not sure, I believe that), but also actively target "connection refused" (I think that... qconn is not listening on port 8000 or another).

  Any who have knowledge of this area, or wild guess I can try?

  OK, I am able to connect through SSH.  It's a little complicated at the moment but I'll simplify and post a recipe as soon as I can.

  For anyone technical enough to follow with minimal intervention:

  1. I generated a 4096-bit RSA key using 'ssh-keygen - b 4096' on a Linux machine, recording in the format 'test_rsa' and 'test_rsa.pub '.
  2. I transferred those to my Windows box.
  3. I called "blackberry-connect targetHost - PCMGM - devicePassword x - test_rsa.pub sshPublicKey."

  This operation transfers the public key in the device by connecting through qconn (port 4455) using unknown protocols.  The output looks like this:

  PROGRESS: Connecting to target 192.168.7.172:4455
  PROGRESS: Authenticating with target 192.168.7.172:4455
  PROGRESS: Encryption parameters verified
  PROGRESS: Authenticating with target credentials.
  PROGRESS: Successfully authenticated with target credentials.
  PROGRESS: Sending ssh key to target 192.168.7.172:4455
  PROGRESS: ssh key successfully transfered.
  PROGRESS: Succesfully Connected
  

  Blackberry connect program continues to run, and as long as it is running at this point the Simulator will be listening for SSH connections on port 22.

  At this point, I had to take the test_rsa (the private key) file and import it into Puttygen using Conversions-> import menu button.  Save the private key, and load the key in the pageant.

  Finally, normally connect using PuTTY at the address PCMGM and sign in as "devuser".  This was discovered by looking in the /accounts folder using a primitive file browser application, where I found two subfolders, 1000 / and devuser.

• How to connect with ssh to esx console

  Hello

  I've read several times that you can connect via SSH, but I can not connect. I used Putty and Filezilla, port normal both SSH port 22.

  Somewhere I read that you should use ftp and upload a file to the remote access connection. But, I do not have access, so I can't download anything.

  I've set the root password in the management console after installation.

  See this link, it may be useful

  http://www.VM-help.com/ESX/esx3i/ESXi_enable_SSH.php

• Unable to connect with the modem router e2500

  I have an old Speedstream 5100 modem hooked to my router e2500. Everything works well except if for any reason any my modem disconnects from the ISP I can not log in via the route to reconnect it. I need to connect a cable modem to computer direct run connect script then modem plug in router all is well again.

  Any ideas why the connection to the modem router is blocked?

  Thnaks,

  Al

  al_mathews wrote:

  My Speedstream has only an Ethernet connection so I did not know that he resembled a router for the local network. I changed the mode of bridge on the PPoE configuration on e2500 / Speedstream and reconnected to the ISP on the e2500 configuration screen. Who can solve the problem of reconnecting from now, it is run on the e2500.

  One thing I see now is since I left the modem IP set to 192.168.0.X can't do it all through the e2500. Is it because my DHCP in e2500 is configured with 192.168.1.X range IP modem is not covered in my network? If I directly connect Speedstream and place you IP 192.168.1.X will become visible on LAN?

  You are unable to access the modem even if you have a PPPoE connection. For PPPoE the E2500 will not need an IP address from the modem so it does not have DHCP on WAN port and so we never see. When you try to access the address of 192.168.0. * the E2500 it will route through the tunnel PPP to the ISP.

  If you connect your computer directly to the SpeedStream it should automatically get a DHCP address (assuming that the computer is still ongoing on the DHCP protocol and not with a static IP address and the SpeedStream does not automatically neutralize the DHCP server in Bridge mode). If you have configured a static IP address on the computer, you must change the IP address to an address of 192.168.0. *.

• OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

  We had the printer since 12 months, workin with no problems.

  Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

  The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

  -The display panel shows "wireless invalid password (WPA) is entered.

  -The results of network printer test page indicates a FAILURE on safety.

  I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

  Anything else I can try?

  Find a new update of the firmware for the printer (May 9, 2016).

  After you apply the update, the printer is able to connect to the new modem.

• Is it possible to connect with database/OOD indesign...

  Hello fellow Indesign user,.

  Don't know if this question belongs here or in scripts.

  I'm just a moderate user in ID CS4 and I got this arduous task to invest/find a way to use Indesign (our existing page layout software) to create ' brochures/manuals"using databases or OOD. Meaning, use a template, add code that is similar to the data entity code predefined in a database/OOD and automatically add the text/images from the database/OOD.

  We're not talking addresses or simple things like that, but brochures and manuals in different languages with different or similar operation for each machine. Some instructions are the same, and some are not. Get my drift?

  We use the ID Cs4 in the business right now, not the smartest tool to use during the production of 25 manuals various brochures/technical with different languages. Edit content in a manual, which means that we must change all 25 brochures and manuals... manually...

  Many of you may think-"why did you start ID first place". The answer: I don't know, I wasn't there then... It is not so far they have discovered-«Oh, we need a new system...» "and guess who had the task to evaluate...

  I need to know if it is possible and how we can use with database ID or OOD-system to retrieve data (for most custom with bulletin data, font, size, photos, etc.).

  Articles, links and other information would be very useful...

  Thank you!

  Vincent

  There are also InData from em software

  http://www.emsoftware.com/products/inData/

• Connect with php from another server

  Hello. I have the following problem.
  
  I use loadVars to communicate with a .php file. When the files flash is on the same domain url, say www.domain.com, as the communication between flash and php .php file works. When I put the flash file on a different domain than the .php file (something like flash - www.domain2.com and .php - www.domain.com) the communication process no longer works.
  
  Someone can explain why or can give me a solution in order to run the FLA file from one server/domain other than the .php file and continue to communicate between these two?
  
  Thank you very much.

  Thank you.

  But I found solutions that use a crossdomain.xml to allow access to my swf on this area.

• N600 WNDR 3400 connection with Verizon Jetpack ROUTER

  How to connect a Jetpack Verizon as my Internet source to the router, I have no an or on lane CABLE MODEM? Thank you

  You do not have or do not

• Connect with SN

  Hello community.

  You can help me please? My friend told me that she called him some support, they said that they are an Appleand say that gave them the serial numberand they was connected.

  Is it possible to connect with the serial number? Or my friend has been ripped off?

  Thank you!

  It is common when accessing Support from Apple that arises for a serial number. It is used in part to see if the product is still under warranty and if she qualifies for free phone support.

• Is it possible to remove my laptop from a domain and keep my desktop, documents, settings, etc.

  I want to delete my phone of the domain that I currently part of and make it a stand alone PC. I want to keep my desktop, documents, settings, etc.  Once I'm off the field, will it be possible to connect with the same username (now local only) and do not have to set up my account from scratch again? I know that my files them is not stored on a server and local on my laptop.

  Thank you.

  Once you remove the computer from the domain, the user profile that you use will not be available. However, you should be able to copy the majority of all the menus of programs, documents and other files, etc. to a new log-in.

  Copy a user profile (TechNet)

  Let's say that you used to connect to MyDomain , using Christan as username. If you want to map network drives to the field to your laptop while under a local log-in (can be anything, even Christan) you should be able to as long provide you credentials for the domain user.

  User: \\MyDomain\Christan

  Password:

  According to the security of the domain, you may need to provide these credentials for things like the network printers, etc. as well.

• Cannot connect with my Microsoft account

  I'm able to connect with my MS on this forum but Skype for Windows Desktop said: No.

  Why?

  Exact message I get:

  Sorry, we did not recognize your connection details. Please check your Skype name and password and try again.

  I am able to connect to this forum and other accounts using my LiveID. Skype is the one and only it does not work. Also able to connect to Skype on my Windows Phone. Only the Windows desktop does not work. Any ideas?

  Since it is not possible to connect with my Microsoft Account on "Desktop Skype" I uninstalled Skype both machines.

  Bye,.

  [Removed for privacy]

• Dell Wireless 1395 WLAN can communicate with the Netgear router

  Everything works very well with my old HP laptop.
  Now, I also have a Dell Inspiron 1520 with a Dell wireless 1395 WLAN mini map. I can't links with my Netgear router using the new Dell. However, I can link to the top of my next "s"Linksys"router, but by very weak signal because of distance. How can I set up for my Dell to connect with my Netgear router?  I went through all the routines of wireless network of Microsoft AND Dell Wireless network routines.

  
  

• Can I install Win XP costs with booting from CD bluetooth keyboard? No problem installing connectivity?

  I have a bluetooth (Logitech MX 5000) keyboard and a mouse bluetooth also.

  Can I boot from the XP CD and completely install fresh XP without any keyboard / mouse of disconnection.

  I m wondering how bluetooth will work if XP is install new files?

  And I want to install by booting from the CD only?

  Maryse Agarwal

  I think that you did not understand the problem.  Some bluetooth keyboard/mouse games include

  a bluetooth adapter that is aware of this problem and start eMule a wired USB device

  until the operating system recognizes (and probably Initializes) as a bluetooth adapter.  As a result,.

  during a clean installation of Windows XP, the keyboard works in the environment of pre-seed.

  (Possibly with help from the BIOS itself that can be done "supported inherited" to do the)

  "USB keyboard" watch compatible all the way back to BACK!)

  In any case, once that installation gets pretty far along some more advanced to load drivers

  the BT adapter leaves its compatibility mode and the keyboard stops working.  Alas, it's good

  before the point where you can create connections to BT.  It's to the point where Windows

  The installation program ask you locale, time zone, a * license key * etc.

  I have not found a way around using another keyboard at this point.  Another mouse is also

  practical but not strictly necessary.  (You can do it using and .)

  Hope this clears some things up.

  -Jam