Is it possible to create a kind of screen split into effect with PrE9?

Similar Questions

• Is CP5.5 - possible to create a summary screen of the quiz with all issues on one screen?

  Hello Forum members

  I was wondering if it is possible, rather than having a quiz to review where you look at a screen at once quiz questions, it is possible to create a quiz summary screen, which will provide a summary that the questions were answered incorrectly/correctly (without actually giving the user the correct answers)?

  Below is an example of what I want to achieve:

  

  Is this possible in CP5.5? Perhaps with stocks advanced/variables?

  Thank you very much

  Loraine

  For more information, Lilybiri has now provided a more detailed explanation of how to realize the idea of vishhere above, which can be found at:

  http://forums.Adobe.com/message/3995154#3995154

  Thank you very much

  Loraine

• Is it possible to create a spreadsheet Numbers alternating line colors I choose (rather than just a line alternating color)?

  Is it possible to create a spreadsheet Numbers alternating line colors I choose (rather than just a line alternating color)?

  Hi tochan,.

  No, but it is possible to create this look.

  

  Procedure:

  Open a table.

  Format > table

  Check the alternative line color. The yellow value.

  Click the form button, select the rectangle.

  Click the shape to select it.

  Format > Style

  Set the fill color to green.

  The border value without border.

  Move the shape to align with the upper left corner of the table.

  Drag the handle at the bottom right of the form to the lower right of the table.

  Go to organize > Send to back (or backward and repeat until the form is behind the table, and the Green shape is visible through the non colored lines).

  Note that the form is independent of the table. If the lines are added to the table, alternating lines will continue to have the yellow filling, as it has been applied to the table itself, but the lines between indicate white background, until the shape is expanded to match the size of the table.

  

  Select the Table (by clicking on the 'target' at the top left.

  Go arrange > Send backward. (Repeat if necessary until the form is in the front of the table)

  Select the shape.

  Resized according to the table.

  Go arrange > Send backward.

  Kind regards

  Barry

• Is it possible to create Transaction Type command in the world?

  Hello

  We do 200 ORGANIZATIONAL unit configuration. Where each OU works the same way.

  In the management of orders, we need create transaction Types of command for each ORGANIZATIONAL unit.

  Is it possible to create a Type of Transaction that can be used worldwide (in multiple OUS).

  Appreciate any help on this.

  Thank you

  LS

  Hello

  The answer is simple-no

  Each transaction type is linked to an ORGANIZATIONAL unit design. There is no way that you can change that.

  Kind regards

  Bashar

• Is it possible to create the formatting for the text box option in Oracle Apex 4.2?

  Hi all

  "I'm trying to create the same form that" ""form DISCUSSION SATRT ORACLE ' and I wanted to know if it is possible to create options for formatting that includes font family, size, indent, style etc,. as shown in the picture.

  Oracle version: 4.2

  DB version: 11.2 g
  

  .

  Kind regards.

  Hello

  Use Rich Text Editor Item in the choice of an element on the page apex. It has a few modes, see mode that suits you.

  -Sunil Bhatia

• Is it possible to create a document merge pdf and mailing to several vendors (each with their own unique values) for them to individual e-sign?

  Is it possible to create a document merge pdf and mailing to several vendors (each with their own unique values) for them to individual e-sign?

  I have my letter and the data that is created in Excel and Word, so I want to create these data in a mail merge (by Word) and then saved in PDF format.

  I wish that each document merged PDF mail to have their signature / title / name of fields as fields of e-sign.  Is this possible? How can I configure my document as well what happends without me one in and edit every PDF document.

  Thank you ~.

  Hello Gallienterprises,

  It seems that you are looking to extract the values of your CSV file in the document of the multiple signatories. For this, you can use the MegaSign feature:

  https://helpx.Adobe.com/content/help/en/document-cloud/help/sending-megasign-using-CSV-fil.html

  Let me know if you need more information.

  Kind regards

  -Usman

• Is it possible to create a protected area of password in a Muse designed website?

  I would like to know if it is possible to create a protected area of password in a Muse designed website? For example, to insert a form that will prompt the user to create a username and password, then send a verification email to the user e-mail with a link that confirms the identity of the new user and give him access to all protected content is. Or, maybe more easy, just create an actual page protected with a true user name and the password that would not appear in the url as does the Muse-themes widget.

  I really need this kind of secure in my website section to give access to my customers to download stuff or to display an overview of the evolution of the project.

  Thanks in advance.

  Marc

  Hi Marc,

  Please take a look at the following threads

  Login using Muse and British Colombia page

  Muse login form!

  Can I create a login/password in the Muse for a HTML5 page or two?

  Let me know if you have any question.

• Is it possible to create a client area on my site with Muse CC?

  Hello

  I just installed the Adobe CC pack, and start building a site Internet of Muse. My client doesn't create a client area on its Web site, but I have no knowledge in XHTML and PHP... I just wanted to know if it is possible to create one with Muse CC?

  Thank you

  "Customer space" can mean many things. What do you think this area of customer to be able to do?

  No, you can't do it with just Muse. Your best bet for this kind of thing if you have no knowledge of coding is generally Adobe Business Catalyst, but it requires even a little knowledge of the works of the BC and some HTML and CSS skills.

• Is it possible to create a generic image of Windows 7?

  Hello world

  Is it possible to create an image of gold that can be "deployed" on multiple machines?

  If so, how do you?

  Kind regards

  Nick

  as mentioned by others, there are many ways... WDS, SCCM, Windows AIK and windows deployment Toolkit etc. to deploy to create the image...

  For VMware is the best and easy thing you can do

  1 - Install VM windos7 and install VMware tools and customize it according to your need

  2 - Sysprep image - if you want to regenerate the SID

  Now to run sysprep, you must launch the administrator command prompt. Then navigate to the sysprep folder by typing: cd sysprep and press to enter.

  

  Then, enter the following commands:

  Sysprep/generalize/shutdown /oobe

  3. This stops the virtual machine.

  4 now, create a virtual appliance in the OVF format or egg, merge, select the virtual machine and in the menu bar > click file > then select the "export to OVF" then give a file name and a location. In the name of the file name with the extension of file OVA. It's VMxxxxxxx.OVA that will save the device in a single file.

  5 - Once finished, you can use this OVA for a deployment, or simply, you can also copy the VMDK virtual machine. OVA will consume less space than the VMDK.

  NOTE: If you want to do the automatic cusotmization which is after the SYSPREP you need an answer file to automate the rest of the deployment process. You can use free tools like VLITE (http://www.vlite.net/download.html) or Windows System Image Manager (WSIM)

  Once the answer file created, give a name to this file as unattend.xml or Autounattend.xmlfile.

  Copy or the unattend.xml file to: C:\windows\system32\sysprep.

  then run the sysprep tool

  Sysprep/generalize/shutdown /unattend:unattend.xml /oobe

  An answer for Windows Vista and Windows 7 file is an XML file that contains the definitions of parameters and values to use during Windows Setup.  The best way to create an answer file for use with a Windows 7 deployment is to use the Windows System Image Manager (WSIM) which is part of the Kit Setup automated Windows (Windows AIK or WAIK).

  
  http://TechNet.Microsoft.com/en-us/library/cc749113%28V=WS.10%29
  http://TechNet.Microsoft.com/en-us/library/dd349348%28V=WS.10%29.aspx
  http://TechNet.Microsoft.com/en-us/library/cc749317%28V=WS.10%29.aspx

• Is it possible to create two-way multiselect tables? Help.

  Hey everyone (once again since you're indeed great to help me to).

  I was wondering if it would be possible to create two-way multiselect tables to interact with each other, as qlikview behavior have, because that's my goal.

  Imagine that I have 3 tables in my schema/database:

  Departments (of an HR diagram), with the following attributes: department_id (primary key), department_name, manager_id, location_id;

  Salary_by_job (created for this purpose), with the following attributes: job_id (primary key), department_id, salary, min_salary, max_salary;

  Employees (from HR diagram), with the following attributes: employe_id,..., job_id, salary, manager_id, department_id

  Would it be possible to creat multiselect two-way tables?

  Like the following:

  -I click on a Department, it shows the data relevant to this Department in the table salary_by_job and the employees table.

  And after having clicked on that, I could click on a single employee and the department table would be the same (because it's an employee in the same Department), but the salary_by_job would show only the information about the argument job_id for this employee.

  I'll try to show some text here:

  Department (selected line = 1) = Department of Public Information (which has 3 employees)

  Employees = X (with the job_id = adminargument), are (with the job_id = managerargument) and Z (with the job_id = Internargument)

  Salary_by_job = Admin, with data blah blah blah, Manager, with data blah blah blah and trainee, with data blah blah blah

  And then I have to click on the X of the employee and the result would be:

  Department (selected line = 1) = Department of Public Information (which has 3 employees)

  Employees = X (with job_id = adminargument)

  Salary_by_job = Admin, with data blah blah blah

  Can do something like this? If so, how?

  I think attached with fasteners at each table and have links to move forward and backward.

  If anyone has an idea how to do this, please respond, it may be useful.

  Thanks a lot for all the help. Have a beautiful day!

  Kind regards

  Frederico Barracha.

  BTW, I use jdeveloper 12.1.2.0.0

  Mensagem editada por: FredericoSB

  FredericoSB,

  Have you tried to add a setPropertyListener for tables and change the collectionModel to the 3rd table accordingly?

  Ex: Suppose you have three tables, Parent (VL)-> child (VL)-> grandchild. There is a relationship between the (VL) Parent-> child.

  Now, you can have links to tree for both the GrandChilds (for example GrandChildViaParent and GrandChildViaChild).

  Your jspx could be something like

  If all your tables are read-only, then you can change it to something like

  This is just a sample. You could implement the same for all properties in the table of a grandchild as EL to make editable as well.

  It comes without coding. If you care to code a little, you could use a dynamic array in place and tie the value accordingly in each of the selectionListener in the table (that would be a neat approach)

  Arun-

• Is it possible to create with Adobe Muse mail HTML Templates?

  Is it possible to create with Adobe Muse mail HTML Templates? or to convert only the html content of the page createt? other tools such as a website copyer?

  tanks for help!

  On the top of my head, you should be able to create models of mail to the muse, BUT he will know very basic html/css on your part. I guess you have just signed?

  Create the design you want on a single page, don't do any kind of style in a master page. Then export the site in a folder. Open the file html with notepad / textedit and then copy just the code for the model. Throw in you choice mail app and it should work.

  This looks like something we could do much more quickly in dreamweaver in design mode.

  Please NOTE: ^ I'm wrong completely - but in theory this may work.

• is it possible to create a raw device on a logical volume?

  Hi all.
  
  The BP is 11.2.0.3 on a linux machine.
  
  Is it possible to create a raw device on a cluster service WITHOUT logical volume of provider of operating system such as HACMP (AIX), Guard (HP) of Service?
  

  The following is os information.
  
  [aa@mm01(abc):/home/abc] uname -a
  Linux aa 2.6.18-194.el5 #1 SMP Mon Mar 29 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
  [aa@mm01(abc):/home/abc] 

  Thanks in advance.
  Best regards.

  Hello

  This command.

  # /usr/bin/raw  /dev/raw/raw1     /dev/Volume00/LogVol01
  

  This link will help you. (It does not matter if the cluster..)
  >

  Kind regards

• Is it possible to create a new file using the XML via java Script?

  Hello everyone,

  Is it possible to create a new file using the XML via java Script

  • I have xml information that need to use for file name, size.
  • Based on xml file we can create a new file in InDesign with java script?
  • Kindly help me if anyone has an idea about this.

  I use InDesign CS4 on windows 7

  Sample file is attached below.

  Kind regards

  Siva

  <UpdateAd>
  <AdId>3403699</AdId>
  <Width type="mm">91,79</Width>
  <Height type="mm">80,00</Height>
  <ProductionCategory>4</ProductionCategory>
  <BookedCCIColors>sw</BookedCCIColors>
  <WorkFlowType>PDF</WorkFlowType>
  <CustomerNumber>652224</CustomerNumber>
  <CustName1>Erich Prang</CustName1>
  <Description/>
  <Description2>R</Description2>
  <UpdateIns>
  <Titel>RHZ</Titel>
  <Publication>B2</Publication>
  <RunDate>26-07-2011</RunDate>
  <Zone>H30</Zone>
  <KDDATEN>nein</KDDATEN>
  </UpdateIns>
  <WorkflowStep>IR</WorkflowStep>
  <Proof>No</Proof>
  </UpdateAd>
  
  

  

  Try this:

  var f =File.openDialog ();
  f.open('r');
  var xml = new XML(f.read());
  f.close();
  
  var myDocument = app.documents.add();
  myDocument.documentPreferences.pageHeight = xml..Height+"mm";
  myDocument.documentPreferences.pageWidth = xml..Width+"mm";
  var rect = myDocument.pages[0].rectangles,add();
  rect.geometricBounds = myDocument.pages[0].bounds;
  rect.strokeAlignment = StrokeAlignment.INSIDE_ALIGNMENT;
  rect.strokeColor = myDocument.swatches.item("Black");
  rect.strokeWeight = 1;
  myDocument.save(File(f.path + "/" + xml..AdId + ".indd"))
  

  Substances

• Is it possible to create a table where the month series is represented as columns?

  Anyone know if it is possible to create a table view where the columns contain dates?  I have not seen something like this in Foglight, so I think that it is not possible currently.  Here is an approximate example of what I mean:

  The 2011 monthly average of JVM heap utilization %

  Server	Jan	Feb	Mar	Apr	May	Jun	Jul	Aug	Ms	Oct	Nov	Dec
  WebSphereServer_1	67	87	45	65	67	78	56	78	88	45	67	77
  WebSphereServer_2	45	56	45	68	89	90	99	34	45	67	78	78
  WebSphereServer_3	67	78	56	34	35	57	7	68	99	78	45	56

  Yes, it is possible.

  You can see examples of that in the out-of-the-box reports / canned reports / group, including "physical host - CPU Utilization monthly summary" and "physical host - memory usage monthly summary.

  You can set this in a Row-Oriented table by specifying the column property 'Iterate Over'.

  You would typically set the value of the "Iterate Over" property to the result of the construction in the query "N consecutive time the beaches."

  Review the definition of "reports / canned reports/memory usage Table" for details.

  Kind regards

  Brian Wheeldon

• Is it possible to create a SOAP adapter entering for a BSE forwarding service

  I received a pre-defined wsdl file that defines the entries of a service of BSE and I wa wondering if it is possible to create an incoming SOAP adapter or if it is in fact outgoing adapter. I'm new to SOAP adapters if you need a little guidance.
  
  I hope someone can help.

  Hello
  In your case, you will need to create a routing Service. If you create an esb project you can select the Routing Service of the Services of BSE entry in the component Palette. You then get the option to select an existing WSDL. The SOAP adapter is used only for outgoing SOAP messages. If you set a forwarding service, it is available as a 'webservice' with a wsdl (in this case that you set) of the console.

  Kind regards
  André Jochems