Is it possible to customize your comments for each incorrect answer in the quiz review?

Similar Questions

• Different response time for each virtual server in the cluster, weblogic 11g

  
  Hello everyone
  
  currently I set up a server with the following characteristics.
  
  O.S. AIX 7
  RAM 32 G
  WebLogic 11 g
  Cluster 4 Server (4 GB each).
  
  My Web the application is deployed on the 4 using servers the management console on another physical server.
  
  J’ai responsible for tests on each server get different time as follows:
  
  Server 1: HostApp: 7090 -> 13 8 seconds
  Server 2: HostApp: 7090 -13 > 5 seconds
  Server 3: HostApp: 7090 -10 > 4 seconds
  Server 4: HostApp: 7090 -> 8 seconds
  
  distribution the load is material.
  
  Why This behavior?
  
  expected be around the same value or not?

  
  

  Thank you

  Please see my comments below:

  1. what made the request? It goes to the database? He calls a web service? Provide details

  2. how to access the application, you have a web server or a load balancer? Provide details.

  2 - is a web application? Is possible to test the application from a browser in the same area where the weblogic?

  I would try that because in this way we can isolate the problem to understand if this is a network problem or a matter of WebLogic Server.

  Best regards

  Luz

• Is there the default values for the answers to the quiz?

  Is it possible to recommend an answer or automatically assign a value to a response in case the user does not know it?

  For example, if the user fills out a form indicating the city where he lives, and after that there's a poll asking which store would be convinient for him or her, if the user ignores this question the system automatically fills in the content of the question in the survey with the value of the city where the user.

  I'm presenting the results of the quiz by e-mail

  Thanks in advance

  Hello

  If you're talking about question by default slides, no..

  If you create your own questions, using a text entry area, it's possible but need some work. If you want to go like that, will try to explain, but now it is midnight here.

  Lilybiri

• Follow the sliders on 4 screens 2D in SIGHT - but how can I get the coordinates to display for each instead of just the active screen

  If DIADEM will bother to follow the cursor on all pages in a journal, I think that there is a NON-SCRIPT way to view the values of Y for all.

  My graphics are aligned to the x-axis (couple), 4 - poster (1 for each rpm, HP, power and efficiency), and 2D 10 parcels on each of 4 screens in DIADEM 2010.

  Shows that the box show the active screen coordinates and others are grayed out.  I played a bit with the "cursor settings", but which generates the same although I add appears in the dialog box "coordinated".  I guess it may have something to do with making it automatic, but I see no way to change this and how I assign it to a channel?

  On another note, I want to be able to synchronize all 4 graphs to be on the same plot (legend) track above and read the same data.  So if parcel 1 is selected in the display of RPM, then the other, three will also be on field 1.  I guess it had to be done programmatically, but if not, I'm all ears.

  Hi Tweedy-

  No, you cannot use the .NET code directly in tiara.  I don't know what is the point in suggesting it, because it would require a significant change to be able to use a similar code in DIAdem.

  Have you tried to use the legends of the VIEW?  Expand the legend for each graph, and then double-click the legend, how you can configure what information is displayed on each curve.  By default, the legend displays the name of curve, curve units, X-Position (the cursor) and (the slider) Y-Position.  Do not hesitate to complete or the contract depending on your preference.

  After having developed each legend, switch to slider Curve and you should be able to see the Y Position of each curve, fully synchronized.

  

• 'Question by default comments' does not apply to all the quiz presenter 7.0.7

  I read a manual adobe note that:

  "Note: . " If you change the default label, feedback from the issue of the messages also change for questions that have already been created '

  And that's just for Presenter 7.0.

  But when I change 'Default Labels' in presenter 7.0.7, only Question button labels apply to all quizzes during the message Question not. The effect will run only the tests that I create after a change of information in "default question Feedback." Perhaps this is mistake of presenter 7.0.7?

  Please tell me if anyone has these experiences.

  It was something that happened in 7.0.0 to 7.0.2 (I think). Then the product has been updated with day/fixed to keep the feedback boxes that they were after the slide has been created. It was then that you were able to customize the rear power, and not to lose the customization during the change of the default label (or anything else in the Quiz Manager also).

  So you see only not the feedback change in 7.0.7, I think is the correct functionality.

• using for each group to combine the 2 data lines

  My xml file has the following in it:
  
  -< AC_DEDUCTIONS >
  voluntary deductions < ELEMENT_CLASSIFICATION > < / ELEMENT_CLASSIFICATION >
  < ELEMENT_TYPE_ID > 3475 < / ELEMENT_TYPE_ID >
  < PRIMARY_BALANCE > 498500 < / PRIMARY_BALANCE >
  < PROCESSING_PRIORITY > 5750 < / PROCESSING_PRIORITY >
  < CURRENT_AMOUNT > 26.22 < / CURRENT_AMOUNT >
  < YTD_AMOUNT > 26.22 < / YTD_AMOUNT >
  < REPORTING_NAME > Opt life Emp < / REPORTING_NAME >
  < ATTRIBUTE_NAME / >
  < RATE_MUL / >
  < DISPLAY_NAME > Opt life Emp < / DISPLAY_NAME >
  < / AC_DEDUCTIONS >
  -< AC_DEDUCTIONS >
  voluntary deductions < ELEMENT_CLASSIFICATION > < / ELEMENT_CLASSIFICATION >
  < ELEMENT_TYPE_ID > 1181 < / ELEMENT_TYPE_ID >
  < PRIMARY_BALANCE > 3511 < / PRIMARY_BALANCE >
  < PROCESSING_PRIORITY > 5750 < / PROCESSING_PRIORITY >
  < CURRENT_AMOUNT > 0 < / CURRENT_AMOUNT >
  < YTD_AMOUNT > 474.95 < / YTD_AMOUNT >
  < REPORTING_NAME > Opt life Emp < / REPORTING_NAME >
  < ATTRIBUTE_NAME / >
  < RATE_MUL / >
  < DISPLAY_NAME > Opt life Emp < / DISPLAY_NAME >
  < / AC_DEDUCTIONS >
  
  Rather than having my exit needle 2 rows of data:
  
  current name amount CDA amount
  
  Opt life Emp 26.22 26.22
  Opt life Emp 0 474.95
  
  
  I'd like to see 1 row with the total amount:
  
  Opt life Emp 26.22 501.17
  
  
  How can I use for each group - in my rtf to achieve? Any help is greatly appreciated.
  
  Thank you.
  
  Susie

  I know what model you have copied :), I was there, when they created that

  It's yours:

  1 text form field-<><=19]?>
  2 text form field-
  3 text form field-
  4 text form field-
  5 text form field-

  change to:

  Text Form Field 1 -  
  Text Form Field 2 - 
  Text Form Field 3 - 
  Text Form Field 4 -  
  Text Form Field 5 - 
  

• Is there a specific forum for each tutorial such as the first condition in DW?

  I'm doing the tutorial here: retrieves a Photoshop design into code in Dreamweaver | Adobe Dreamweaver tutorials CC

  I asked how to get the pictures in the tutorial is displayed on my computer, but I can't ask the right question, I guess. I downloaded the files, the unzipped in a folder that is newly formed and named my site, but the pictures of the PS are not displayed.

  So my first question is: Y at - it a specific forum for each DW tutorial as with all prime which has its ' own forum? Here is the link to this forum. Man and style a webpage in Dreamweaver

  Second question is higher on the photos of PS in the first link.

  Thank you

  Deb

  I repeat the advice that has been given over and repeatedly learn DO NOT "Dreamweaver". The door to collaboration successfully with any web development, including Dreamweaver software, is to understand the role of HTML and CSS.

  HTML is still pretty simple. The main thing that happened with HTML5 has been the introduction of some new elements of grouping, such as the header, footer, section, article and so on. Most of them are named intuitively, but you can continue to use the div to group items. What has changed is CSS. She is now much more powerful and has become more difficult to control. Even people like me, who have it used for years, have to learn new things all the time.

  Regarding the suggestion through courses on lynda.com, I'm obviously biased. However, I would advise against the use of lynda.com to learn the basics of Dreamweaver. The main course of Dreamweaver, Dreamweaver CC Essential Trainingis up to date. It will be updated, but not immediately. There are more courses Dreamweaver to update on lynda.com, including my Responsive Design with Bootstrap and Dreamweaver CC 2015and create a site of first with Dreamweaver CC 2105 of Paul Trani. However, they assume a basic knowledge of HTML and CSS.

  For those who have a lynda.com subscription, or plan to get one, first courses, you should look at are HTML Essential Training, Web Design Fundamentalsand basics of CSS. These three courses are taught by James Williamson, who is a brilliant teacher.

  There is, of course, other resources that teach the same basic web development technologies, some free, others paid for. But until you have a good knowledge of HTML and CSS, Dreamweaver will remain a frustrating mystery.

• for each loop to print the values in the same line?

  
  Hi guys,.

  For our customer, I create a RTF file.

  In one line, I use this:

  Internal req. Ref #: <? for-each: G_2? > <? SEGMENT1? > <? end foreach? >

  Now when I run this report this part of line shows the values in separate lines

  Output:

  -----------------------------------------------

  Inside Ref No. DDE:

    226

  230

  ------------------------------------------------

  How can I make it back in the same line. Like this and separated by commas

  -----------------------------------------------

  Internal req. Ref #: 226 230

  ------------------------------------------------

  You can use inline grouping, please take a look at these posts:

  https://blogs.Oracle.com/XmlPublisher/entry/inline_grouping

  Re: Using conditional output

  Re: Display data from a list in a single field with values separated by commas

• measure the actual page for each page size in the listbox

  Hi guys,.

  I'm trying to write a script that lists all the pages in the ListBox with 2 additional columns: width and height

  and stuck when trying to get the limits of pages for each page in the document.

  My result looks like this now:

  

  script no matter what I'm trying to get only the size of the 1st page and fill in all items.

  My code to get the size of the page above is:

  myDoc = app.activeDocument;

  page var = myDoc.pages [0];

  ...

  function myRealHeight() {}

  var Pbound = page.bounds;

  var pH = Pbound [2] - Pbound [0];

  var realHeight = [];

  for (j = 0; j < myDoc.pages.length; j ++) {}

  realHeight.push (pH);

  }

  Return realHeight;

  }

  I have tryied a few different ways but but always returned [object Page] or higher.

  I'm newbie in scripts, and if someone could help me will be great.

  Thank you

  (let me know if other parts of the code are required)

  Try this (sorry not tested).

  var myDoc = app.activeDocument;

  ...

  function myRealHeight() {}

  var realHeight = [];

  for (j = 0; j< mydoc.pages.length;="" j="">

  page var = myDoc.pages [j];

  var Pbound = page.bounds;

  var pH = Pbound [2] - Pbound [0];

  realHeight.push (pH);

  }

  Return realHeight;

  }

• for each not applicable to the type of the expression

  Hello!!
  
  I use jdeveloper 11.1.1.5
  
  I had used this code in my AMImpl method
  

  for (row = glacclrs.first();row!=null;row=glacclrs.next()){
              for (Object o:schclasslist){                              //I am getting error as for each applicable to expression type
                  if(o.toString().equals(row.getAttribute("GaclPrimId") ==null ? "" : row.getAttribute("GaclPrimId"))){
                      classlist.add(row.getAttribute("GaclId"));
                      break;
                  }

  I fight with this error :(
  
  Could someone help me pls

  Hello

  Instead of setting the list as: list schclasslist = new ArrayList();

  Watever datatype, you try to store in this list: use this type of data.

  As: The list schclasslist = new ArrayList ();

  Try the above;

• Table row with loop for each group to set the variable.

  HI: There is probably a simple answer for this, but I don't the have not found...
  
  I have a single row table to move through a group to set a variable containing a sum running. I'm not display the amount in the table but when I saw the report, I see that the table is expanding (add lines) for each loop.
  
  The only line table has 3 columns.
  
  1st column
  <? for-each: AC_GROUP? >
  
  2nd column
  <? xdoxslt:set_variable ($_XDOCTX, 'xAmtVar', xdoxslt:get_variable($_XDOCTX,'xAmtVar') + CURRENT_AMOUNT)? >
  
  3rd column
  <? end foreach? >
  
  Can I use <? for each group? > or something else. My requirement is to set the value of the variable with the total running, but because the loop is adding lines for each value he travels (though not displayed), it's also affecting other areas of the presentation of the page.
  
  Hope it makes sense. Thanks in advance.

  You can do it many ways.

  No need to loop
  You can create a variable and specify the amount of the sum directly to that.

  or

  loop through, then add as you do.

  give any space or enter characters in a word between them, just put it in a single form field will be

  But as I said, I'd definitely go with the first option.

• How to enter comments for each photo?  Preparation of photos for sale at the auction house.

  I have a historical photo collection b & w preparation for the auction.  How to catalogue each photo with custom comments?  I have LR 4.4

  You will need to type this info in this field in the metadata Panel.  I assume that you want to use the legend, perhaps Title fields, two fields must be empty for you to enter custom text. If you select all images and enter the text, all the images Gets the same data. So think about what you want to pop over there and if you can do so at the same time, or if you will need to do frame-by-frame.

• You will need to run Adobe Customization Wizard each time for each new update of the player?

  Hello

  This should be a simple question...

  I run Adobe Customization Wizard each time on each new incremental update of player, or just once a major revision (Reader 9, Reader X)?

  Not answered this question because it would be better asked in the forum for enterprise deployment. The Wiz is a tool of deployment of the NTS and is used only for initial deployments in most cases. It allows to customize the installer and the product when it is first installed. You can use it for all installations, but it is a less common scenario.

  Usually, you customize the first version you install and then just apply updates as they become available.

  HTH.

  Ben

• Is it possible to customize my icons in Games Explorer? are the icons customizable PGN (e.g. Chess Titans, cell free..) and when I drag an application from a game to Games Explorer loses i ' ts icon and shows me the unknown file icon.

  Customize icons,
  Games Explorer

  To do this, you can try this tool...

  http://gebuilder.fdan.de/

  Not sure if it will work in 7 as it was written in Vista, but you can give it a shot.

  Kevin

• Is it possible to add a description for each slide in the slide show as a slide to separate before each photo?

  I am trying to create a descriptive slideshow with explanatory text before each slide.

  Can you suggest the smart way to do it quickly?

  Hi graceplight,

  It is not possible to add descriptions to individual slides in Lightroom.

  Please take a look at the article, it may be useful: https://helpx.adobe.com/lightroom/help/playing-exporting-slide-shows.html

  Please let us know if it helps.

  Kind regards

  Tanuj Sandal