Is it possible to get the split screen function in firefox 4

Similar Questions

• Satellite L650: Is it possible to get the higher screen resolution?

  L650-1CH 15.6 ", 1366 x 768.
  ATI HD5650 1 GB

  Passionate about hardware, so please don't feel expected excessive things for me.

  Is it possible to get a screen resolution higher than stock, or better with the color / contrast?

  I was always annoyed how to wash the stock on my watched Toshiba screen. Recently the screen is cracked, so I figure now is the best time to look at the options.

  Google gave me very little information so far. I checked prices on replacement of the screen, with the part about being 60 and part + service with an average of 120, but that most likely leaves me with the same or lower screen quality.

  I hope to find something more suited to the movies / games and in 1600 x 900 if possible.

  Indications as to where I should start my search?

  Hello

  > Is it possible to get a screen resolution higher than stock, or better with the color / contrast?
  Yes, this should be possible since the graphics card should support a higher resolution.

  The laptop supports display TFT 15.6 "(HD).
  You certainly have the same screen size.

  Found some spare parts to the page + + pchub.com

• Is it possible to get the lock screen shots to turn?

  Is it possible to use a slideshow of images like the lock screen? Also, is there a way to get photos of screen lock to rotate automatically so that whenever I have lock the computer, a different image is used for the lock screen?

  Is it possible to use a slideshow of images like the lock screen? Also, is there a way to get photos of screen lock to rotate automatically so that whenever I have lock the computer, a different image is used for the lock screen?

  Hello

  There is no option to rotate the image of the lock screen.

  You can set a custom lock screen picture.

  On the Start screen , press the Windows key + I , and then select the option change PC settings .

  At the top of the window, click on the link of the lock screen .

  Click on the Browse button and navigate to a custom image to use.

  This custom image appears only when you log in or lock the system.

  If you choose to switch accounts, disconnection, or any other function which shows other accounts, the default lock screen image show.

  There are a few third party there settings that alter this behavior, but I have found no still works.

  Concerning

• Try to get the split screen set up.

  Is there a way I can get the screen on my computer with windows 7? Two different applications going at the same time?

  Hi SuzyQ87,

  I'm not sure I quite understand your request...

  Assuming that you do not want to have two windows application tiled on your screen, so that each occupies half of the screen, one on the left and one on the right, you can use the new feature in Windows 7 Aero Snap (Docking).

  1. open the first application.

  2. to ensure that it is not maximized.  It is considered to be maximized if the application takes up the entire screen and you can't see any part of the office.  If it IS a maximized, click the Center button (square, blue highlight) in the upper right window of the application.  It will grow smaller and you will be able to see the desktop around it.

  3. now, move your mouse to the top of the window title bar, click the mouse and drag the window to the left edge of the screen.  Keep, drag until the mouse reaches the edge and see you the outline of the window to jump to the center of the screen.  Let the mouse upwards.  The application will now sized to fill in only half of the screen.

  4. Repeat steps 1 and 2 with the second request.

  5 drag, as in step 3, but this time to the right of the screen.

  Voila, two windows tiled side by side on your screen.  You can drag the edge again and they return to their original shape and their size.

  FYI, the Aero Snap setting must be enabled (which is the default) so that the above to work:

  http://www.Winhelponline.com/blog/enable-and-disable-Aero-snap-Docking-Windows-7/

  -Christmas

• How to avoid accidentally getting the split screen. I never want that. 3.6.11 version. Thank you

  I don't know how I did it, but now when I go to drag a web page below on the right scroll bar another mini bar appears. If I accidentally hit that all of a sudden I have two pages to the top at the same time and I can't get back to where I was without closing the page entirely.

  How to avoid this? I rarely want to two pages at the same time.

  Thank you

  This isn't a feature built into Firefox. You have an add-on like Fox Splitter installed? This one seems to do what you describe.

• I read the messages on the screen split prooblem I have. I read the posts and I do not have the separator module of fox. Is there another way I can eliminate the split screen?

  I have firefox installed on both computers. The office displays not the split screen, but the laptop don't. I checked the posts and I have not the separator module of fox but still get the split screen when I click on a second site.

  Firefox has no built-in opportunity to split the screen. There are several add-ons that can split the screen to solve this to know what originally, using the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  Another possibility is that you have a few set bookmarks to open in the sidebar. If this only happens for a few bookmarks, right-click on the bookmark, and then select Properties. Make sure that the "Load this bookmark in the sidebar" option is not selected.

• Is it possible to get the details of the file (for example the subject and comments) off the screen and to an Excel file or a text file without having to retype this information

  Is it possible to get the details of the file (for example the subject and comments) off the screen and to an Excel file or a text file without having to retype this information

  * original title - file details *.

  Hello

  Could you explain what is exactly? What do you mean by off the screen?

  According to my way of thinking, you want to export the file details of all your files on your HARD drive to an excel file or a txt file. If I'm right in this case, it is not possible to export the details of each & every file in the excel sheet.

• Qosmio G30-163: is it possible to get the HDMI by component

  Hello

  It seems that I'll be stuck with my Qosmio back to its own screen whenever I turn off my LCD TV. So what to do?
  I have a box of multiple component entry from another manufacturer. Is it possible to get the HDMI / component?

  While I listen to my signal through that?
  The only other option is for me to leave my TV in all of time...

  Hello

  Hmm, to my knowledge the HDMI / component is not possible.
  The HDMI-DVI adapter is known to me. Also the "cable DVI-component.

  In any case, I don't think that it is a large and serious issue. You can use the FN + F5 combination to toggle the display if the image switches to the internal display of the laptop!

  Best regards

  Goodbye ;)

• How can I remove the split screen option when you open an attachment on the email?

  I had used the option of screen split using strong control of the two tabs on the toolbar at the bottom of the screen and right click for the split-screen option.  Now, when I open an application such as Internet explorer, it happens in the split screen mode.  This is quite annoying and I would like to know how to restore everything in full screen when opening applications, web pages, etc.

  Thank you.

  Hi ClaudiamYE,

  In addition to querry of Samhruth G, please let us know what happens if you click on optimize your internet explore or any application, you get full-screen this time?

  As your subject what I understand you face split screen problem when opening word document in e-mail, so it is called reading pane. You can disable it from within Word, click on start-> all programs-> Word 07-> click the Ribbon on the upper left-> select the Word Options-> Popular => uncheck «attachments open in full screen...» ».

  I hope this helps.

• I get the blue screen error - error - Stop 0X0000008E

  -Stop error 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000)

  Hi I get the blue screen error - error - Stop 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000) and cannot use the pc in safe mode. I have XP - OS. I really don't want to reformat the HARD drive and you want to avoid reinstalling as much as possible

  Hi aromaveda,

  ·         Have you made changes on the computer?

  Follow these methods.

  Method 1: Follow the steps in the article.

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

• Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

  Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Is it possible to rotate the full screen?

  Hello

  I'm sorry for posting this twice, but I think that the topic of my former post was misleading and I could change it either. Old thread: (http://supportforums.blackberry.com/t5/Java-Development/Possibility-to-rotate-a-whole-MIDlet-or-its-...

  Is it possible to rotate the entire screen?

  I'm programming a Midlet "BOLD" and the Storm 2. My Midlet has the following Dimensions:

  Width 360, height 480;

  It works great on the Storm 2, but I want to turn on the "BOLD" (because the width of the screen is 480, height is 360) so that the user needs to hold the camera on the side (screen on the left keyboard, to the right).

  To illustrate what I want here, it's a little graphic:

  

  Any help is appreciated! Even a "is not possible" would contribute to

  Thanks in advance,

  Benny

  Yes, that was what I tried to avoid, because I need to rotate the text as well and "cords" can not be rotated (easily); I was hoping to get a response like "Yes just use this method, and you're done" - but as it was already such a hassle to program for blackberry (before the announcement) it does not wonder that it is not as simple as that.

  What I have now is:

  -J' wrote a method, which replaces the Image.createImage (imgString) to rotate my images if a flag (displayIsRotated) is set

  -For both Versions, I have different paint methods who swap the X and the values of Y (could have done this with a flag or an additional method, but painting two methods are OK for me)

  -Channels: it was the most boring. g.drawString () is not able to draw strings turned, I implemented a BitmapFont class (in http://devlinslab.blogspot.com/2007/11/using-custom-fonts-or-bitmap-fonts-part_07.html) where I corrected a bug and he changed a bit in order to draw turned bitmap images and created a few BitmapFonts with the MicroFontMaker tool (http://j2me-mwt.sourceforge.net/microfontmaker.html).

  Benny

• STOR. E TV can play some formats - is it possible to get the firmware update?

  Is it possible to get the update of firmware for STOR. E TV, because this product cannot read many formats.
  I woud would better update of firmware for video - AVI (Xvid, AVC, MPEG1/2/4), MPG/MPEG, VOB, MKV (h.264, x.264, AVC, MPEG1/2/4, VC - 1), TS/TP/M2T (MPEG1/2/4, AVC, VC-1), MP4/MOV (MPEG4, h.264), M2TS, WMV9.

  Can someone REPAIR THIS TOSHIBA in the FUTURE?

  Hello

  It would be always great if a device would be supports all possible formats
  Allows how such as firmware updates or similar would be released
  Who knows what guys are going to do in the future, we'll see.

• Installed the network updated drivers hp support page now I get the blue screen of death

  Installed the network updated drivers for my laptop hp support page and now I get the blue screen of death a few minutes of Internet usage.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5171...

  I can reboot the computer, but it only works for a little bit before again becoming the blue screen.

  I tried to download and reinstall the hp 8 drivers network twice now. (Product number: QJ793AV-#ABA)

  I am running windows 7 (x 64) and downloaded all the updates as well.

  Any help would be greatly appreciated.

  I made an another windows update and seems to be ok for now

• Is it possible to get the RAID on model T?

  Is it possible to get the RAID on model T? For example if I have a RAID between the mSata SSD and HARD drive?

  T series does not support hardware RAID.