How to avoid accidentally getting the split screen. I never want that. 3.6.11 version. Thank you

Similar Questions

• Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Hi ipitedafoo,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

• Is it possible to get the split screen function in firefox 4

  The possibility of dividing the screen was a very useful feature in the previous version of firefox, however, it is not available in version 4. Is there another way to get this tool?

  Firefox has never had a built-in option in the split screen, such a feature is added by an extension. The only one I know that is compatible with Firefox 4 is Split Pannel - https://addons.mozilla.org/firefox/addon/split-pannel

• Try to get the split screen set up.

  Is there a way I can get the screen on my computer with windows 7? Two different applications going at the same time?

  Hi SuzyQ87,

  I'm not sure I quite understand your request...

  Assuming that you do not want to have two windows application tiled on your screen, so that each occupies half of the screen, one on the left and one on the right, you can use the new feature in Windows 7 Aero Snap (Docking).

  1. open the first application.

  2. to ensure that it is not maximized.  It is considered to be maximized if the application takes up the entire screen and you can't see any part of the office.  If it IS a maximized, click the Center button (square, blue highlight) in the upper right window of the application.  It will grow smaller and you will be able to see the desktop around it.

  3. now, move your mouse to the top of the window title bar, click the mouse and drag the window to the left edge of the screen.  Keep, drag until the mouse reaches the edge and see you the outline of the window to jump to the center of the screen.  Let the mouse upwards.  The application will now sized to fill in only half of the screen.

  4. Repeat steps 1 and 2 with the second request.

  5 drag, as in step 3, but this time to the right of the screen.

  Voila, two windows tiled side by side on your screen.  You can drag the edge again and they return to their original shape and their size.

  FYI, the Aero Snap setting must be enabled (which is the default) so that the above to work:

  http://www.Winhelponline.com/blog/enable-and-disable-Aero-snap-Docking-Windows-7/

  -Christmas

• How can I reboot my pc (reformat)? Windows XP - want to remove ALL - please help, thank you!

  attempt to delete everything on my pc! Please sumone help! Thank you very much.

  You want to reinstall Windows XP, or you want to install another operating system?  Or you want to erase everything because you want to sell or give away your computer?

  If you want to reinstall Windows XP you have a Windows XP CD?  You have the product key all important?  Without the product key, you will not be able to install Windows.

  If you just want to reinstall Windows XP for your own use then just boot the computer with your Windows XP CD and press screen printing 'Welcome' to install Windows and the next screen, press F8 to accept the end user license agreement.  After accepting the EULA, you will be presented a list of partitions and disks available, simply select the partition where you want to install Windows and have the installer to format the partition and then follow the instructions on the screen.

  Note that formatting does not erase the files on the drive, everything simply writes a new boot sector and erases the record of all entries table and shows the disc under vacuum for the operating system.  You can get the free files (such as TestDisk) recovery utilities that can easily recover formatted partition.  Even if you reinstall the system operating, commercial data recovery can still recover files in areas that have not been replaced with the new files after you have formatted the drive.  Obvioyusly is not in the safest thing if you want to give or sell your computer, or if you want to remove the stubborn MBR or boot sector virus, in this case you want to zero fill the drive and rebuild it.  Get a zero fill utility (disk wiping) and fill the disk with zeros, this will completely destroy all data on the disk and prevent recovery of files.  You can get a zero utility filling of the manufacturer of your drive, or you can use one of them (Secure Erase is my preferrence):

  Secure erase

  Darik Boot And Nuke (DBAN)

  (Note that these utilities are not suitable for SCSI drives, if you have disks SCSI contact the manufacturer for a suitable utility)

  After fill you to zero the drive start just the computer with the Windows XP CD and the Setup disk selection screen will see and present as a new disk.  Create a partition and format, then proceed with the installation of Windows.  Don't make the mistake of installing Windows on a partition too small, better to use the entire disk rather than running out of space more later!

  Native and favorite of the filesystem for windows XP is NTFS, format the NTFS partition, unless you have compelling reasons to use a different file system.

  And yet once, remember that you can not install Windows without the product key, you must ensure that you have the key before format or erase the disk.  Without the key, you'll be up the proverbial Creek!

  John

• I need to get the program "AdobePreiereProFamily6mul so I can install my purchased product.»  Thank you.

  How can I get AdobePremierePro Family6mul to begin my installation of AdobePremierePro?

  You can use the appropriate link below for your installation files

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.5 | 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• How can I re - open the Welcome screen?

  What I found is on disabling it, but I like it - a little like bridge.

  In any case – how can I re - open the home screen after I opened my first document?

  Thank you

  Hi Andrew

  I'm glad you like the Welcome screen. But, welcome screen will appear only when no document is open in the application.

  But again, you can enable the recent files Panel when you do a file > open or Ctrl/Cmd + O instead of open the OS dialog box. How it works - first time you launch Open (file > open or Ctrl/Cmd + O), recent files Panel appears, but if you want to see the OS dialog instead, you can again (second time) file > Open or Ctrl / Cmd + O while the recent files Panel appears and this will open the OS dialog box.

  To enable this workflow, you can go to preferences and select the preference to opening of the salon "Recent files" Workspace file.

  Thank you

  Anasuiya Gupta

• I read the messages on the screen split prooblem I have. I read the posts and I do not have the separator module of fox. Is there another way I can eliminate the split screen?

  I have firefox installed on both computers. The office displays not the split screen, but the laptop don't. I checked the posts and I have not the separator module of fox but still get the split screen when I click on a second site.

  Firefox has no built-in opportunity to split the screen. There are several add-ons that can split the screen to solve this to know what originally, using the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  Another possibility is that you have a few set bookmarks to open in the sidebar. If this only happens for a few bookmarks, right-click on the bookmark, and then select Properties. Make sure that the "Load this bookmark in the sidebar" option is not selected.

• How can I remove the split screen option when you open an attachment on the email?

  I had used the option of screen split using strong control of the two tabs on the toolbar at the bottom of the screen and right click for the split-screen option.  Now, when I open an application such as Internet explorer, it happens in the split screen mode.  This is quite annoying and I would like to know how to restore everything in full screen when opening applications, web pages, etc.

  Thank you.

  Hi ClaudiamYE,

  In addition to querry of Samhruth G, please let us know what happens if you click on optimize your internet explore or any application, you get full-screen this time?

  As your subject what I understand you face split screen problem when opening word document in e-mail, so it is called reading pane. You can disable it from within Word, click on start-> all programs-> Word 07-> click the Ribbon on the upper left-> select the Word Options-> Popular => uncheck «attachments open in full screen...» ».

  I hope this helps.

• I uninstalled the touchsmart from hp on vista and then tried the system restore, dad will kill me, how can I get the touch screen to work again?

  I uninstalled the touchsmart from hp on vista and then tried the system restore, dad will kill me, how can I get the touch screen to work again?

  Hello

  You have a specific question for HP, it may be better if you ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/

  See you soon.

• How can I activate the split screen?

  How can I activate the split screen?

  Slide down from the top of the screen, to about halfway or remove an application open to the left of the screen.

  When you have the app in a small floating window under your finger move it to the left or right of the screen and drop it when we see the appearance of separation bar.

  Steve

• How can I get the splash screen in the trial cs6

  How can I get the splash screen in the trial cs6

  Help--> see the tip of the day or similar... Depends on what program you use exactly...

  Mylenium

• I have no welcome screen. How can I get the Welcome screen?

  I am running XP Home Edition.  When I turn on the computer, I get only a window where I can type the user and password, but do not get the Welcome screen I'm used on other computers I use XP.  I want the screen which shows each user next to a small table, where choose you one to connect.  I also can't get there in the menu START.  If I click START, then click on LOG OFF, I don't get the option to SWITCH USERS that would take me to the screen of welcome as well.  If I open the control PANEL and click USER ACCOUNTS, I can't find a prompt which is supposed to say "change the way users Log On.  It comes to have I'm supposed to find a checkbox indicating "use the Welcome screen.  Is not an option for this version of XP?  Am just missing something?  Help, please!

  Hello clay Spinner

  Try this and see if this helps you

• How to get the active screen of the BlackBerry application?

  Hello

  I'm trying to get the active screen of the BlackBerry application, for example the home menu.

  I tried to use the screen ActiveScreen = getUiEngine () .getActiveScreen () in my code, but found error during execution.

  I know that this is because the getActiveScreen() method applies only for screens created by this application.

  So is there a way to capture the screen of the other application, for example the mail filter BlcackBerry?

  Thank you.

  Not wanting to not to repeat me, but there is no general way to get access to the Screen of another application object, unless you are on good terms with this application - which basically means that you have access to the instance UiApplication.  You cannot ask the operating system to get that to you, you must have a way to get you.  Which implies execution of something in the context of the Application.

  Even in this case, you may not be able to do what you want.  You will probably need to iterate over the screen and content managers and find the field you want, and even if it covers anything you understand (like BasicEditField) it still cannot handle standard things like setText in a way that is useful to you.  And you might not find fields you recognize, if you access a browser screen, I think you'll find there \are RIM not standard fields in there, so there is nothing you can interact from a standard application of the RIM.

  If you want to do this kind of treatment in General, that will deal with in a number of applications, you should watch event Injection.

  There may be other options for specific applications.  For example, you can simulate of electronic mail by writing a program that sends an email, rather than interact with the BlackBerry.  Or for the same application, if you try to test the headphones, then the listener has access to the UiApplication.  Aye, we be able to help you find approaches less General in some places, if we understand what you're trying to do.  This is the reason for the specific question that I asked in my last post.

  Regarding your second question

  "Another question is, can two separate applications of myself interaction by the user interface?

  For example, to call app2. ButtonField.click () or something. »

  It is in fact just an extension to your first question.  The difference is that you will find the UiApplication associated if both applications are on good terms, in fact you can "spend" the UiApplication via a Global event.  Once you have the UiApplication, you can use

  .invokeLater (...)

  to run the user interface code in the other Application.

  But I look at injector event because I think it might be a more general solution.

• I get the blue screen error - error - Stop 0X0000008E

  -Stop error 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000)

  Hi I get the blue screen error - error - Stop 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000) and cannot use the pc in safe mode. I have XP - OS. I really don't want to reformat the HARD drive and you want to avoid reinstalling as much as possible

  Hi aromaveda,

  ·         Have you made changes on the computer?

  Follow these methods.

  Method 1: Follow the steps in the article.

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.