Is it possible to install the second disk in Satellite A300-15 a PSAJ4E

Similar Questions

• I can't install the second disk sata hard

  I have a problem when install the second disk sata hard
  I bought a new one 500 GB and I installed windows xp sp3
  and it works well I plugged in SATA 0 port
  When I want to install a second sata hard disk 320 on sata 1
  and it has an important data, windows will reboot, and do
  blue screen sometimes 'NTFS.sys"or"SCSIPORT.sys.
  and it is written "DRIVER_IRQL_NOT_LESS_OR_EQUAL".
  If someone help me what should I do or there is no FIX for this problem.

  in the BIOS I have regcognized both hard drivers:
  IDE pri master 500 GB
  PRI IDE slave 320
  Second master IDE-
  Second slave IDE-
  PORT SATA - 0
  SATA 1 - PORT

  I plugged the IDE 2 cd-rom

  ----------
  Specification of the device:
  Windows xp sp3
  card mother gigabyte 848P
  Intel ICH5
  Intel 8I848p775-g
  Celeron D Socket 775

  You said that the hard drives are sata but your bios recognizes them as IDE depending on your position. You might have to set your bios to operate in sata mode or enable AHCI of have recognized them as sata. Regarding the error you get, look in the system BIOS to boot from hard disk command menu. This is different from the command menu of usual starting where you choose each time you start a cd ROM or hard drive ect... The parameter that I refer to determine which hard drive of your computer starts on the first. Change to the primary master 500 GB disk > save your settings and restart your computer. Even if one is defined as main and the other slave is not serious. Some bios have the ability to choose what hard drive to boot from. In other words, it is adjustable to start first on the slave drive.

• The computer I use at work is a PC. I know that you are allowed to install programs on two computers, a computer work and a laptop. My laptop is a Mac. Is it possible to install the second copy on a Mac?

  I don't know if I'm in the right forum for this question, but I don't know where else to ask about installation on platforms. Thus, the computer I use at work is a PC. I know that you are allowed to install programs on two computers, a computer work and a laptop. My laptop is a Mac. Is it possible to install the second copy on a Mac?

  What exactly Adobe product?

  Clouds: Yes.

  Creative Suite: No.

• Possible to install the second hard drive in the p6110f Pavilion

  Is it possible to install a second hard drive, 1 TB Seagate, in the expansion on my Pavillion p6110f slot?

  Hello

  Your PC has a hard drive cage which will host two disks.  This how-to - HP document from removing a hard drive will show you the process to remove the hard drive cage.

  If you want to continue using the Expansion Bay then you will need a 5.25 "to 3.5" adapter support. NewEgg.com would bring such a support.  You also need a SATA data cable.  This how-to - HP article will give you an idea on how to use Expansion with a 5.25 device Bay ".  Check by the optical drinve for a spare SATA power connector.  If it is not available, then you will need to use a SATA power splitter.

• I need to connect the second HDD in Satellite A300-14V

  Hello!

  I'm using A300-14V and now I need to install the second HARD drive. But 2.5 hard drives have different heights from 9.5 mm to 12.5 mm including a right for my Satellite A300? And I'll need to also buy a slide.

  Could someone please clarify that she is and give me the part number?
  Thank you.

  Hello

  Did you check if your laptop is able to manage the second HDD?
  I mean there is a second HARD-drive Bay, but have you checked if there is a connector needed?

  You should check this first before you buy hard drives

• Can I build at the second disk on Satellite P200-1I4?

  Hello!

  Before all sorry for my bad English. =((

  I have a toshiba SATELLITE P200-1I4 and the question is: can I install a HDD (additional) more. Or there is only one SATA slot in this laptop? Unfortunately for laptop is not close to me now, and I can't remove the back panel and see.
  On the web site of Toshiba, I can't find any information about it.

  More information:
  SATELLITE P200-1I4
  S/N: z7269306k - M/n: PSPB3E-0J601MRU

  Thanks, and I hope that all written above is understandable. =)

  Best thing you can do is to remove the cover for the second HARD drive and see if the HARD drive connector is available.
  If this is not the case, there is no possibility to upgrade the HARD drive.

  Maybe someone on this forum has the same laptop model and can check for you.

• I can't put it on the second drive in Satellite A300-1EG

  Hello

  The question is whether I can put on the second HARD drive for laptop Toshiba A300-1EG, there is a place for one I found and what HARD drive it's, I mean 2.5 "and etc?

  As I read, there may be no connection to HARD drive, depending on model, how can I discovered?

  Thank you.

  Hello

  You can check yourself.
  Remove the plastic cover that holds the second HARD drive Bay.
  Is there some HARD drive connectors, then you could install a second HDD.
  If the connectors are missing, then you will not be able to use the second HARD drive.

  I know that it s a little but confusing due to the second HDD bay but the fact is that different models A300 supports different motherboards and not all motherboards are equipped with two HARD disk controllers.

  Welcome them

• Recovery disk is deletes the data at the 2nd disk on Satellite A300?

  Hello
  I use a laptop Toshiba A300, which has 2 hard drives (250GB). The laptop has Windows Vista Home Edition 32-bit installed, but I want to change for Windows Vista 64-bit, which comes with the recovery disk, in order to use all 4 GB of RAM.

  I have all the backup data and move them to the 2nd HARD drive (D, C named first name).

  So I wonder if Recovery Wizard will delete the data of the two hard disks or just a 1st.

  Thanks in advance
  Kevin

  Hello

  Your laptop was equipped with HARD drive recovery option allows you to create the own Toshiba Recovery disk which would be contains the preinstalled operating system.
  In your case the Vista 32 bit.

  And Yes, install from the recovery disk format the whole HARD drive and removes all the disk, also of the second partition.

  That's why to create the recovery disk before you install or change anything on the HARD drive

• How to install the second hard drive in the Dell XPS 8900

  My new Dell XPS 8900 only has a single HH and I would install a second HH.  Probably 3.5 SATA internal a 2 T.  I need a repair of XPS 8900 so that I know how to install the second disk.  I just need a few simple instructions so that I know how attached a data cable SATA and do the go by car.  Direction will be appreciated.

  You will need the drive AND a data cable.  The manual is here:

  www.Dell.com/.../manuals

• Hi, I work with the standard of the CS6 for Mac, Adobe, I bought a DVD with the software. I already installed on my mac book. Soon, I want to buy a second computer for my work. When I bought the software told me that it is possible to install the

  Hi, I work with the standard of the CS6 for Mac, Adobe, I bought a DVD with the software. I already installed on my mac book. Soon, I want to buy a second computer for my work. When I purchased the software, I was told that it is possible to install the software on a second computer. But I also read lately that I will be allowed to work with a computer. I want to work on both of my computers without or install and / activation of the software every time. Is this possible? Thank you!!

  @

  You should be able to install the product on two computers as long as they are running at the same. The platform should also be Mac

  You can download the product of

  Download the CS6 products

• Is it possible to install the same recovery XP 2 times on 2 partitions

  Dear people.

  Is it possible to install the Recovery XP home 2 times on 2 partitions on my Satellite?
  I want one as a desktop and one for music downloads.

  When I boot the second new system installed there say: installation is not complete, please reinstall!

  Thanks in advance

  What model of laptop you have exactly? As previous user written with former recovery media, it should be possible (I can't tell for sure) because the use of the expert installations you can choose the partition where the OS is to be installed.

  If you have newer model cell phone with new software to recovery (RECO) something like this is not possible.

• Is it possible to install a second HDD for Equium A200

  Is it possible to install a second hard drive for my equium, I see the empty Bay on the base, but some elements are missing to connect another drive?

  What series Equium do you mean exactly?

• How do we install the second install second hard drive p6-2118? Do I need an additional framework?

  How do we install the second install second hard drive p6-2118? Do I need an additional framework?

  I came with a couple of brackets that I can mount on each side of the installed hard drive. Then hang the second disc of their share. I think that it works well and enough space for cooling. Thank you for your response.

• What do I need install the second hard drive HP PAVILION: p6633w

  What do I need install the second hard drive HP PAVILION: p6633w?

  donp815 wrote:
  

  What do I need install the second hard drive HP PAVILION: p6633w?

  Hello

  You need two cables, one is a sata cable:

  http://www.play.com/PC/PCs/4-/30305659/706331346/STARTech-com-6in-SATA-to-right-angle-SATA-serial-ATA-cable-female-SATA-female-SATA-6-inch-red/ListingDetails.html?_%24JA=TSID:13315% 7Ccat: 30305659% 7Cprd: 30305659 & kw = {keyword}

  This cable is only for data and connect the hard drive to the SATA connector on the motherboard.

  The other cable is energy:

  http://www.itpartsdirect.com/STARTech-15-24cm-4-pin-Molex-to-SATA-power-cable-adaptor.html

  It connects the hard drive to the PSU.

  You can also buy a combo like this cable:

  http://www.Amazon.co.UK/DP/B00064GBT4/?tag=hydra0b-21&hvadid=9550951989&ref=asc_df_B00064GBT4

  All you have to do is to connect the hard drive and that's it. Make sure that the main drive with the operating system is connected to the primary SATA connector (I think there are the numbers 1, 2, 3...)

• I'm not able to install both on the same PC LabVIEW applications. I have uninstall the first application in order to install the second. Is there a way to avoid this?

  I wrote two LabVIEW applications. The first acquires data from three different devices, displays the data and writes it to a file. The second application reads the data and displays it on the screen.

  Can I install the first application and run it, but I can only install the second application if I uninstall the first application.

  Any ideas as to why this is happening?

  You install applications by using a Setup program created with the application builder to LV?

  What LV version do you use?

  You have a dedicated for each installer build script, or do you still want to change the settings of a single build script (which would be a reason for this behavior!)?

  hope this helps,

  Norbert