I need to connect the second HDD in Satellite A300-14V

Similar Questions

• I can't put it on the second drive in Satellite A300-1EG

  Hello

  The question is whether I can put on the second HARD drive for laptop Toshiba A300-1EG, there is a place for one I found and what HARD drive it's, I mean 2.5 "and etc?

  As I read, there may be no connection to HARD drive, depending on model, how can I discovered?

  Thank you.

  Hello

  You can check yourself.
  Remove the plastic cover that holds the second HARD drive Bay.
  Is there some HARD drive connectors, then you could install a second HDD.
  If the connectors are missing, then you will not be able to use the second HARD drive.

  I know that it s a little but confusing due to the second HDD bay but the fact is that different models A300 supports different motherboards and not all motherboards are equipped with two HARD disk controllers.

  Welcome them

• Is it possible to install the second disk in Satellite A300-15 a PSAJ4E

  Hello!

  I just bought Satellite A300-15A (PSAJ4E).
  I read in some reviews that these models have an empty space for an additional HARD drive, but that some models do not have an additional connector for a second HDD.

  I wonder if it is possible to install the second HARD drive in my A300-15 has.

  Thank you!

  Hello Ivo

  To be clear: A300 laptop come with a few different hardware configurations. Some of them with one and some of them with two hard drives. The plastic case is the same for all models of laptops and you can find room for the second HARD drive, but the motherboard is not the same and not stretch with the second HARD drive.

  Remove the cover from the HARD drive to the second HARD drive and let us know if the HARD drive connector is available.
  I'm sure that there is no connector.

• 6B55DX dv7: what cabling needed to connect the second HD

  I would like to add a 2nd hard drive, but although there is an empty Bay, there is no wiring.  My questions:

  1. What are the numbers of the part for the wiring needed?
  2. Are there other necessary parts such as clamps, cages, etc. ?
  3. Where can I get these parts?
  4. Is there anything else I need to know on the subject of bringing the HD after installation?

  I intend using the extra drive for extra storage; I won't start him.

  This is the cable you need:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=379

  The dv7-6000 series was supposed to be supplied with the box hard drive, but no cable or screw. If you do not have the caddy (also called sled or cage) then you will need to find one of those too

  http://www.eBay.com/ITM/665597-001-genuine-original-HP-hard-drive-caddy-second-dv7-6c-series-/291671518946?hash=item43e8fa2ee2:g:dkAAAOSwGotWqUHQ

  You do this right. A hard drive in secondary Bay can be initiated, but makes a great place for additional storage capacity.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Satellite A200 - 1 M 8 and the second HDD bay

  Hallo, I want to install a second internal HDD to hdd2 Bay, but when I opened the Bay I noticed that it is not all connectors installed.
  So, what's the point of a second drive Bay hard if there are no connectors inside?

  Hello
  The point of this Bay is, IF you buy a model with a second equipped HARD drive then there will be a connector, but if bought a model with a SINGLE disc fitted then you just need a drive since the connector to the second HDD was not soldered on the motherboard of your model.

  Easy and simple. If you want to have a second drive, then you must either:

  -solder a connector for the motherboard which causes your warranty and does not mean that you can use a second drive since you will need the appropriate BIOS Rom
  -buy a USB - HDD and accept your situation :/

  That's all.

  Welcome them

• Not able to connect the second monitor

  Original title: Second monitor visible only on the first plugin

  Implementation:

  New (Nov 2014) Lenovo PC

  AMD A8 H535

  Windows 8.1

  AMD Radeon HD D 7560 w / VGA output and an HDMI output

  Two HP w1907 monitors (resolution is identical on both screens - when they work together)

  Question:

  Last night I plugged my second monitor to the HDMI output with an HDMI adapter / VGA of the Amazon ( adapter ), plug the monitor into it has not come and via the control panel (I tried both via the control panel and some change PC settings) could not detect the second monitor. Then, I went to the HP website and downloaded the drivers, but to no avail. Then I reached down and unplugged the second monitor and resettled to make sure that there is a link, this solved the problem. The monitor came and no further investigation was necessary. However, this morning I woke up the computer to a single monitor and still unable to detect the second monitor. Only when I unplugged and re-inserted the link it works.

  I'm at the end of my rope and need help with this, thanks in advance for any help you can provide.

  Hello

   
  I understand that you are not able to connect the second monitor to the computer. This problem may occur because of outdated or damaged display card drivers.
   
  So I suggest to follow the steps mentioned below and check if help them.
   
  Method 1
  Please check the steps mentioned in the link below to check that everything has been done correctly to connect the second monitor.
  Plug a second monitor or projector
  http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors

  Method 2

  Install all Windows updates and check if it solves the problem. You can check the below link to do.
  Windows Update: frequently asked Questions
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ
   
  If problem still persists, go to method 3.
  Method 3
  Uninstall and reinstall the display driver and check if it helps. First download the display driver and save it to the computer. You can download the latest driver to display from the link below.
  http://support.AMD.com/en-us/download

  Uninstall the display driver, then reinstall it. Follow the steps
  mentioned below to uninstall:
  1. press Windows + R, type devmgmt.msc , and then click ok.
  2. now, find and click with the right button on the display driver and click Uninstall.

  Also install the catalyst for AMD. You can download it from the link below. http://support.AMD.com/en-us/download/desktop?OS=Windows%208.1%20-%2064

  Hope this information helps. Please get back to us if you need further assistance.

• Satellite A305-S6843 - recovery disk anli Does the second HDD too?

  I have two TRUE separated different hard disks inside (200 GB each).
  I got to a point where I have to start all over again... If I want to use the recovery disk, that I had with the laptop. but then I get into a stage where I can choose "erase the hard drive.

  My question is: will it erase ONLY the reader of the OS (c :))? or also in the other drive (d :))?
  I have a lot of files in the second drive, I want to keep.

  Thanks in advance,
  Ofer

  > Recovery disk does not erase the second HDD too?
  MOM restore disk will delete all data and partition on the first HARD disk.
  All the data saved on the second HARD drive are safe and will not be affected.

  I have Satellite Pro P300 with two hard drives and I tested it several times.
  If you have important data on the first disk HARD just moving to the second HARD drive and install the OS by using Toshiba recovery image.

• You will need to connect the battery, but lapptop now sign showing that the battery is not connected, so does not load.

  You will need to connect the battery. until recently, all ok.  never use the laptop as a mobile, always on the wireless, but lapptop shows now sign that the battery is not connected so does not load.

  I have a laptop which, so far, is always connected wireless when it is in use. I want to take a vacation, and notice a signal arrives that the battery is not connected and therefore does not load.  This has happened recently, although the battery never showed a 100% charge. can someone tell me how to connect the battery please.

  Check that the battery is correctly installed. If it is then the problem is that the battery is exhausted, so you should buy a new battery.

• Creation of the DSN that is needed to connect the 5.1 vCenter to SQL Server

  I'm looking for a simple process, step by step create the DSN that is needed to connect the vCenter Server 5.1 to an already configured SQL database.

  It must be simple, still usable by a person who is not a database administrator.  He should assume no knowledge of database.

  It should be usable on 64 - bit Windows 2008 Server R2 OS when connecting to a SQL Server 2008 R2 database.

  It must include ALL the options I have to configure when configuring the DSN, so that later I can run vCenter Server 5.1 installation and Breeze the by.

  Screenshots would be too great, but if you have a step by step, that would be great.  Some thing that you can go totally illiterate crew of database and they can cross step by step.  Docs from VMware do not give enough details and do not point to a good reference.

  Hello

  Click on Control Panel > administrative tools > Data Sources (ODBC).

  Open ODBC connection, select the system DSN tab, and then click Add

  Select SQL native client, click on finish

  He will ask DSN name, enter the name you want for VC DSN.

  Then enter the address database of VC.

  Then it will ask for authentication, select which option of your choice, as based on windows or SQL based authentication.

  Then click Next and select the correct database that has been created for VC in drop-down option

  Finishing and test the connection.

  Concerning

  Mohammed

• Second HDD on Satellite X 200-15 K

  Can I add a second HDD on this model? There is space, but no adjustment.

  Thank you

  Is there no second controller HARD drive then you will not be able to add the second HDD.
  The point is that Toshiba laptops are equipped with different hardware parts and, therefore, takes care of the different specifications.
  Your laptop seems to have the same coverage, but the card mother doesn t support two hard drives.

• Is possible to use the second HDD in PPM81E Portege M800-105

  Hello!

  Does anyone know, if it is possible to extend a Portege M800 - 105 model No. PPM81E with a second HDD?
  Is there a MediaBay for the DVD player to install a second hard drive?

  My goal is to use a Solid State Disk (64GByte) as the first disc (System only) and store all user data on the second drive.

  Best regards
  Sven

  Hello

  To my knowledge it is not possible to use a second HDD Portege M800.

  The laptop supports eSATA connection so you can connect an external HARD drive.

  Welcome them

• Settings need to connect a second desktop computer using a NetGear wireless adapter.

  Original title: wireless settings

  I need the settings to connect a second desktop computer using a NetGear wireless adapter.

  The Belkin router work a lot using my Tablet and streaming movies but I can't understand

  the settings on the second PC.

  Any help will be appreciated.

  Thank you.

  "Settings", you need are the SSID (network name) and the encryption key (password).

  Unless you have configured the router to 'hide' the SSID (generally a bad idea), you will see in the list of available wireless networks.  Then, the only thing you need is the encryption key.

  If you do not write your encryption key, you can find it by logging into your router configuration utility.

  If you have a computer running Windows can now connect to the router, open a command prompt window (start > run > cmd > OK) and type "ipconfig" (without the quotes) and press ENTER.  Take note of the 'Default gateway' address.  It is the IP address of the router.

  The default IP for Belkin routers is 192.168.2.1.

  On a computer that is already connected to the router, open a browser (Internet Explorer or Firefox) and enter the IP address of the router (the gateway by default, you noted above or 192.168.2.1).  If you do not have a computer that is connected to the wireless router, you will need to temporarily connect a computer to the router by an Ethernet cable.

  Connect to the router configuration utility.  If prompted for a password and you don't remember, you need to reset the router to its factory default.  Return ticket for additional instructions.

  Once logged in, click on "Security" under "wireless" in the menu.  At this point, you should see a page that shows your password.  Write it down and exit the router configuration utility without making any changes.

  For more help, post back with the model of your Belkin router and also mention if you have any Windows computer that can connect to the router (and if yes, what version of Windows they use).

• I do not see the second HDD on Qosmio G

  Hi all

  Yesterday I did a system recovery, but after that, I do not see my second hard drive. Every time when I started the laptop I have message about this second disk mirroring. When I bought this laptop I had two the two 60 GB hard drive and now system show me only the second local disk C there is no.

  I need to change and where to see them again the two hard drive?

  Hello

  Could you please tell us what phone you have? Thank you

  Now to your question. For me it of clear. The RAID has been configured for mirroring (RAID-1)
  If one of the HARD disk fails, the disk HARD drive can be replaced and its data reconstructed from the other HARD drive which has not failed.

  You can change the RAID settings and disable mirroring in the BIOS.
  But after changing the RAID, you will need to reinstall the entire operating system.

  PS: much useful and tip info you will find in your user manual.

• Qosmio G30-161: can not see the second HDD in my computer

  Hello
  can someone tell me, that I rebooted reboot DVD in my laptop to restore all of the windows in the normal settings
  as I got when I bought the laptop.
  but for some reason when I go into my computer I do not see the 2nd HDD.

  There is only one disk c it but not the other hard drive. I need to change the settings of smoke to see the 2nd hard drive?

  Hello

  Well, the Qosmio G30-161 should be delivered with two hard drives of 60 GB.
  I guess you can see a single HARD disk due to the RAID settings.
  The unit supports RAID technology.
  I think that the RAID is on the mirror. This means that the data is duplicated on both disks.
  Generally, it should be possible to disable the RAID.
  Check the folder utilities Toshiba.

  PS: It is possible that you will lose data after changing the RAID settings. Be careful.

• connect the second computer to the network

  installed new router E1200. initially the computer second value as a "guest." OK for two computers, Internet access. Trying to put the second computer on the main network in order to use common printer, but it does not connect.  When I try it says "settings saved on this computer do not match the requirements of the network. Key codes are entered correctly. How can I fix it?

  Oops looks like I got the security type in the wrong and I am now connected to the main network.  printer is still not workin from the second computer but I wil try restarting the computer and the router.