Is it possible to launch and run a VI in a project from a simple icon?

Similar Questions

• Deploy and run the part of the project in real time RT

  I am developing a project, LabVIEW-RT, with a User Interface on the PC and evanescent code that runs on a PXI system.  I read a few posts discussing the possibility (or lack thereof) to start the RT of the project by program part.  Here's what I mean: my project has a first level VI on the host PC, call 'Host UI.vi', and a first level VI on the RT target, call it "target RT.vi".  There is the usual assortment of other features of the RT, such as flow, LAN and network Variables shared, etc.

  During development, I open the project, find the code RT target, select the target RT.vi and click Run.  I can do the same with the host UI.vi.  My code works (or not, depending on whether I have introduced new bugs).

  What I would like do is to run the host user interface and run the code to mimic an RT target selection in my project and perform a right-click.  I partly managed, but a small step escapes me.

  Can I programmatically deploy my RT code and make it pop a window front so I can click on the Start button.  I even managed to start running programmatically using VI server.  However, when I start it programmatically (rather than clicking Run), my shared network Variables are not available.

  I studied it a bit by using Distributed System Manager.  With her, I can 'see' my shared Variables of network on the target of the RT, but its status is offline.  I put online by clicking on the button 'Start process' in DSM, however, when I then try programmatically start my vi target RT using VI Server, Shared Ntwork variables goes Offline (accordint DSM).

  Question - is there a way to do a program equivalent to locate my network shared Variable in DSM and clicking on start processes?

  [I had a great idea while writing this post.]  I have noticed that if I deployed my VI and also expanded my network shared Variable, DSM has shown to be online, but the target RT start VI VI Server, the NSV went offline.  What happens if I have deployed it after from the remote?  Good idea, too bad that it didn't work...].

  All the best ideas?

  BS

  Well, I just did!  I wrote a demo project RT with the following characteristics: RT side consists of a single VI that affect False in a Boolean Variable (NSV) shared network, goes in a while loop until there is true, goes into an another wait loop to make it False, then ends.  The NSV is hosted in a library on the remote target.

  The host does the following:

  1. Determine the IP address of the target of the project.
  2. The first name of the VI RT to run, to return a reference to it.
  3. Use the reference to deploy the RT VI on the remote target.
  4. Use the IP address and the name of the RT VI for a VI Server reference.
  5. Use the reference to start the code that runs on the target of RT.
  6. Go in a loop looking at the NSV and wait for the status of the error not be 8BBB0006 (uninitialized NSV).
  7. With the value returned by the NSV (must be set to False, defined by the code of RT), deny it, set it and wait that it will change.
  8. Do this one more time to return the NSV to its original value (as defined by the code of RT).

  Before running the code, right-click on the target of RT in the project and turn on "disable AutoDeploy Variables.  J of Zach, an Applications Engineer of NOR, suggested that this step, which can be the key step in the resolution of this dilemma.

  To test this, I restarted my PC and the aim of RT.  Once both had restarted, I opened the project on the PC, and without interaction with the section the project somehow RT (including not not clicking 'Connect'), I ran the host code.  He started the remote code and was told that the round trip time for set and reset my NSV was about 29 msec.

  I intend to make a full text of this and submit the entire project, with documentation and all the screws under utility, I used, to community page OR.  I'll try to get this done this weekend...

  Bob Schor

• How can I find and restore volume control that has disappeared from my system icons?

  The icon for the volume control in the toolbar at the foot of the screen disappeared.  How can I find it and restore?

  Hi Fran,

  Please see the following article for instructions that should help solve this problem: http://support.microsoft.com/kb/945011.

  Good luck!

  Kosh

• is it possible to load and execute space cadets in windows 7 on a Windows XP disk. then running in a mode of compatibility for Windows XP or 95

  original title: Space cadet 3D pinball

  Pinball Space cadet is not not available for windows 7. is it possible to load and execute space cadets in windows 7 on a Windows XP disk. then running in a mode of compatibility for Windows XP or 95. I have a relevant disc that I purchased when using XP (and seriouly consider replace Windowsd 7 with). If it is possible, are there problems to download it.

  Try this: http://mspinball.weebly.com/download.html. He was installing a short test, and it works (download and installation may alert you to "Unknown Publisher", but various analyses did not find anything harmful). "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• Impossible to determine return PID of launch AND can not run app due to the 8 error

  Hello

  I'm new on NDK BB as well as waterfalls and the C. M AI cannot run a sample application of cascade on BB Dev Alpha Simulator.

  When I try to run the app I get pop 'impossible to determine PID returned to launch '.
  The icon of the application on the Simulator, but when I click on the icon to launch the application, I get the pop up 'Impossible to launch my App name in the error 8'

  Please, can someone guide me what mssing 'em here.

  Concerning

  Hello

  I don't know how but my problem is now solved, today I just started the system. Clean, build and run the application and the error is no longer there (I tried several times yesterday, do not know why he has not worked at the time)

  @borceg build configuration is set to Simulator-debug

  Thank you all for your help.

  Concerning

• Is it possible to launch the media player 11 reduced to a minimum?

  Hello

  Is it possible to launch the media player 11 reduced to a minimum.

  Thank you

  Paul UK

  Hi ratchet.

  It is certainly possible to run Windows Media Player mini mode, to so, try the following steps

  · Click the Windows 'Start' menu, then click on "Windows Media Player" to launch the media player. Right click on any part of the Windows taskbar, and then point to "Toolbars."

  · Select "Windows Media Player." Click "Reduce" to start the media player in mini mode.

  · Right-click the task bar if you want to return to the default display. Select "Toolbars" and click on "Windows Media Player."

  In addition, please let me know the operating system you are using.

• All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

  All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

  Script launched in until OS user 'A' on the 'A' server which launches sqlplus, then connects to a remote database through a service of tnsnames.ora as another user of the database and the results of this script are spoulées on the server "A".

  The file queued on the old server is written with rw-rw-r: read write user, group read the writing, reading and possession header that is the user of the OS. The file queued on the new server is written to rw-r-r user: reading writing, reading group, public reading and ownership oracle: dba.

  "" The user then has no privileges to modify the file and continue the process of transmitting the file, editing and deleting the file for the next set of commands. This allows us to keep the possibility to migrate to the new server we are unable to process orders.

  $ORACLE_HOME/bin/sqlplus - s user/password@prd1 @./script/CustomScript/R12_OM_UFPC-oracle.sql

  Background: old server running 4.8, Oracle 10.2.0.4 OEL

  New server running OEL 6.5, Oracle 11.2.0.4

  Tested so far:

  File and update umask to 0002 instead of 0022 is now generated as rw-r-r. However, the property is still oracle: dba.

  Update of ownershipt of $ORACLE_HOME/bin/oracle.exe of oracle: oracle (edi added the user to the oracle group) and chmod 6751 oracle.exe. This created several problems where crucial scripts, that is to say of sqlplus failed to run.

  Added! chmod 755 output.file.name - OS user 'A' is not allowed to change to mod.

  Added! command cp MV output file and that generated the file as a user of the operating system: oracle. It is a potential work around in case of emergency, but the developer would have to rewrite the countless scripts.

  Any ideas?

  I have reproduced the behavior of the old server and am able to spool a file via sqlplus under OS user. No changes have been made on the remote database server. All the changes have been on the new server hosting a small 11.2.0.4 database on a server running OEL 6.5 32 - bit OS.

  (1) removed the sticky bit $ORACLE_HOME/bin/sqlplus using chmod u-s, g-s, o - s suggestion of Billy ~ Verreynne

  (2) modified the main group for the 'oracle' user match the user operating system applications, while maintaining membership in the groups 'oracle' and 'dba '.

  -We are dealing with here EDI processes, so the Group was called edi.

  (3) modified property of the files tnsnames.ora and listener.ora for oracle: edi

  (4) restart the receiver

  (5) disconnect / reconnect

  Script runs as expected, the output file contains the correct ownership and permissions.

  Thank you all for taking a look and offering options.

  -Josh

• Is it possible to launch a pop-up window

  I tried all sorts of code snippets, but so far nothing not working, is it possible to launch a pop-up window of a transparent button in Adobe Captivate 4.  Or any other way to have a learner to click on a link or a graphic to open a pop-up window?

  Thank you-

  Manola

  Hi all

  This is possible, but not without using JavaScript to do it. You're better off if you insert the script into the HTML code of the wrapper file that Captivate creates. You'll probably need to declare a function and insert the script into the function. Then inside Captivate, insert a click box or a Button object and set it to run JavaScript. From there, you must insert the name of function that you created in the HTML wrapper file.

  What was mentioned in the last post has been using open URL or file. This might work, but you'd probably need to make sure that the option has been chosen to open the link in a new window.

  See you soon... Rick

  Click here for authorized Adobe Captivate and RoboHelp HTML training Click here for the SorcerStone Blog Click here for RoboHelp and Captivate eBooks

• How to connect to a windows OS to IOS and run a windows program?

  Hi all

  I would like to know if possible to run a windows program (i.e. DIR or WINVER) on a machine windows on the network via a computer of IOS command line is connected to the same network. Basically, I have 2 computers in a network, a MAC OS and the other is WINDOWS. MAC OS I want to run a command of windows inside the windows machine.

  For example, via the terminal in my mac I want to connect on the windows machine, and run any windows program I have in the windows machine.

  I know it's possible to do on linux via the command line WMI Windows Management Instrumentation command-line.

  Do we have something similar to the WMI for IOS command line?

  Rodrigo.

  I'm confused. You mention a PC (Windows OS), Mac OS (Apple computer) and iOS (Apple iPod touch, iPhone and iPad operating system).

  You can get apps that allows a computer iOS to use a computer mac or Windows computer such as LogMeIn or GoToMyPC.

  Yu can also get the app that allows you to use your Mac to access a PC.

• Calculator doesn't launch and crashes during startup. I use the last El Capitan.

  Calculator has suddenly stopped working and won't start. I sent the Apple crash log and it seems that code signing is invalid.

  Process: Calculator [2249]

  Path: /Applications/Calculator.app/Contents/MacOS/Calculator

  ID: com.apple.calculator

  Version: 10.8 (123)

  Generation information: Calculator-151000000000000 ~ 6

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Responsible for: Calculator [2249]

  User ID: 501

  Date/time: 2016-07-11 07:52:32.136-0700

  OS version: Mac OS X 10.11.5 (15F34)

  Report Version: 11

  Anonymous UUID: F75B22F8-CA9E-FB3E-1CFD-18478AD676BC

  Time since started awake: 9100 seconds

  Integrity of system protection: enabled

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_INSTRUCTION (SIGILL)

  Exception codes: 0000000000000001 0 x, 0 x 0000000000000000

  Note the exception: EXC_CORPSE_NOTIFY

  Request for clarification:

  The registration of sandbox: code signing is invalid: the operation could not be completed. (OSStatus-67030 error.)

  Application of specific Signatures:

  Registration error: code signing is invalid: the operation could not b

  This last error message registration code is truncated after the letter 'b '. I'm not including the rest of the code journal accident like the silent question, is that for some reason, the calculator application is corrupt and the code signature is no longer valid.

  Is there a way to replace the calculator app?

  Try to copy a version of another mac.

  Another possibility is to download and run the appropriate drop-down list update, even if it is the same version that you already use.

  Your profile says 10.6.8 which is probably not correct, that you post in the forum of the EC.

  So, assuming you are using the current 10.11.5, you can download the update Combo directly from Apple here:

  Download OS X El Capitan 10.11.5 Combo Update - Apple Support

• I tried to update, but sites still say I use an older version. I downloaded the latest version and run the program to "downloads".

  Sites like Pandora and gmail keep telling me that I use an older version of Firefox. So I followed their links to update, download the latest version and run it from my downloaded programs. But it doesn't seem to work as the sites always give me the same message.

  Something that you have changed your User Agent or prevents your User Agent to update with the new installation/update of Firefox. I suspect it's Fast Browser Search, which is shown as part of the User Agent. To get rid of Fast Browser Search do the following:

  1. Closing of Firefox (Firefox button > exit OR File > Exit)
  2. Open the Windows XP Control Panel and remove/uninstall "Fast Browser search protection" and "Fast Browser Search" (MyWebTatoo)
     • See-> http://support.microsoft.com/kb/307895
     • Your User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.9.0.15) Gecko/2009101601 Firefox/3.0.15 (.NET CLR 3.5.30729) FBSMTWB
       
     • What is a User Agent: http://en.wikipedia.org/wiki/User_Agent
  3. Launch Firefox
     • Reset your User Agent according to the instructions in the article below:
       • See-> reset your user agent
     • Check your version of Firefox:
       • See-> finding your Firefox version

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Portege M400: Is it possible to receive and make calls with the SIM card

  Is it possible to receive and make calls with the card SIM module in the Portege M400?

  I know that you can send and receive sms messeges, which, according to me, the software is not all good because you can't hold much, and you can't send to ems or mms.

  But there may be other software here?

  Hello

  What software do you mean exactly?

  As far as I know that the MobiLink was preinstalled on some units Portege M400.
  This software supports these features:
  Send and receive SMS, composition and read TEXT messages in several languages, compose and send to multiple recipients, the mobile contacts address book support, Rich edit for the launch of URL and Email using embedded addresses.

  As you can see that you can not use this software to make calls!
  And unfortunately other software does not know me :(

  With regard to the MobiLink Communications Software Suite;
  The details can be verified here:
  http://www.novatelwireless.com/products/solutions/MobiLink.html

  Greetings

• Add SSD and running BONE of him in a HP desktop computer

  Is it possible to add a SSD in HP P/N: H5Y85AA Desktop 700-070d and displacement of the BONE to this SSD?

  Quick response would be much appreciated.

  Thank you very much.

  Hello

  Yes, you can clone your current HARD drive to your new SSD, install new SSD on your computer and run it from there. Please note:

  (un) Normally smaller SSD (2.5 "vs 3.5") so you need a kit of mounting for her, including the following:

  http://www.eBay.com/Sch/i.html?_sacat=0 & _nkw=2.5%22+to+3.5%22+Mounting+adapter+bracket+SSD & _sac = 1

  (b) when cloning, you may need to select only the OS drive, otherwise it does not unless you have the (larger) SSD. There are many free around software

  http://www.TechRepublic.com/blog/five-apps/five-free-and-reliable-cloning-tools/

  and you can also get a kit of cloning of seller for around $10-$15.

  Kind regards.

• How to disable 'Hit and run' on Toshiba Satellite

  I can't find the touch and launch on my Satellite. I think it is boring.

  I have it disabled, but he insists on the execution of a task in the system tray telling me that he's disabled.

  I like a tidy taskbar neat without unnecessary icons, and this alert is annoying as well.

  Is there a way to touch and launch stop running this alert in my taskbar (Windows XP)?

  If you do not need this utility go in ' Add/Remove programs and delete the system. After that it all will be ok.

• I get a "not an application valid win 32 error" when I try to download and run a program

  Original title: win 32 error

  When I dounload one program and try to run it I get one is not a valid win32 application error. This happens on more than 1 program how to fix this?

  Hello

  ·         What program are you trying to install?

  ·         The program is compatible with Windows XP?

  ·         Since when are you facing this problem?

  ·         What web browser do you use to download a file?

  I suggest to delete temporary internet files from your computer, and then try to download the program, save it in a different location and try to install it from there.

   

  Get the error: not a valid 32-bit application can have several origins:

  I have listed some of them below.

  The file is corrupted, bad or missing.
  (a) if the hard drive is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.

  (b) If you are running the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:

  
  (a) If you try to run a program that is not designed for your version of Windows, you can get this error.

  (b) Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.

  (c) if the program is an MS-DOS program more former start program or Windows, you can get this error.

  (d) if the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.

  
  (a) this error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.

  (b) if the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.

  one) If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or drivers that are not compatible with Windows.

  (b) download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Follow these steps and check if that helps:

  Step 1:

  I suggest you to download and run the latest Microsoft security on your computer Scanner and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

   

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651