Is it possible to list all the text in a PDF package?

Similar Questions

• Improve the thin line apply to all the text in my PDF

  So I'm just learning the cause of my fonts bold when show my CV in Adobe Reader was the thin line improve "characteristic". But anyway, I read are just a few bold letters, my document as a whole is to be bold! When I turn off the thin line it seems to improve as it should, but if someone only has not this function or views in a good web browser see "BOLD" lines, how the hell do I fix this? I tried several things like change the font and by increasing the size of the characters, but no matter what it still applies it the player application both in web browsers, no matter if its an installed font or Times New Roman it still happens.

  Please any help?

  Improvement on

  

  Fine lines off

  

  Maybe you have inadvertently applied a stroke to your text in InDesign. If the race has any color, InDesign will give a preview of the text even if the width of the line is set to zero.

  To test a sample, select any word in bold with the text tool, open the swatches Panel and check that it has any color applied to the race. If there is, it changes to zero.

• How to list all the files in a backup job?

  User GreyGnome:

  I would like to get a list of all the files on a file system backup task. Is this possible?

  Through the CLI, if possible. On Linux.

  Thank you.

  Posted by AdrianMoir

  Hi GreyGnome,

  You can actually set this via the user interface on the backup options for employment. See attached picture.

  This will allow you to define a path and file name of a text file that lists all the files that are backed up by work, when the work is performed.

  Once the option set is saved under a name, if you create jobs through the CLI, with nvjobcreate, you can specify the selectionoptionsetname - , by using the name of the set option that you created with the entry 'Path to Backup Log'.

  The text file will display the name of the file in the following attributes...

  Backup Path, State, Type, size (bytes), Timestamp, attributes.

  Thank you very much

  Adrian.

• Get all the text values in a XML node

  Suppose I have a XMLList that I'm working my way through and I want to quickly and easily get all the 'text' from the node. In other work strip the < xmtag > all possible markup and attributes and just leave the content.

  There is a simple/fast way to do it?

  < myNode >

  < title > title an event here < /title >

  < host > name and title of the presenter here < / presenter >

  < date startTime = "Somedate" / >

  < desc > <! [CDATA [text here. [[It < b > would < /b > have html or links or something like.]] > < / desc >

  < resources >

  list of < resources > has some resources, downloads, etc. < / res >

  < resources > another site or something like < / res >

  < / resource >

  < / myNode >

  If the xml is your XML instance, after loading is finished:

  trace (XML.descedants("*"). Text());

• Create a script to list all the .bat and .cmd files with the dir command &

  Hello

  Im trying to create a script that will list all the .bat and .cmd files in a specific folder and add the data to a new file (file.txt) - example below:

  dir c:\>desktop\file.txt/OD
  dir d:\>>desktop\file.txt
  dir f:\jobs\*.bat>>desktop\file.txt/OD

  IM able to search the F drive and the list of all the .bat files using a generic parameter, but ideally id like to search for .bat and .cmd files, but whenever I have it try does not work. Any ideas?

  I tried the following:

  dir c:\>desktop\file.txt/OD
  dir d:\>>desktop\file.txt
  dir f:\jobs\*.bat,*.cmd>>desktop\file.txt/OD

  Any help is appreciated, the reason for which I need to check all the .bat and .cmd files is to ensure that the scripts on a cluster are all data, so need them all listed in a doc if possible

  Thank you

  Hello

  Thank you for visiting the Microsoft answers community site. Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for guys official script Forum. Please ask your question in the official Scripting Guys Forum.

  http://social.technet.Microsoft.com/forums/en-us/iTCG/threads

• List all the songs?

  Hi, I have a quick beginner question:

  I just finished all my music on my new SanDisk Sansa clip + loading, and I've encountered a problem. In the individual sections for each of the artists, there seems to be no way to list all of the songs from this particular artist in my library. Instead, there are only folders for each album and the "Play All" option. Now if I want to play a song in particular of this artist, I have to go to the respective album folder and select the song. It works fine if I remember the album for every song I want to play, but if I don't remember, I go through each folder.

  What I saw before with portable mp3 players is a way to list all of the songs from a particular artist in alphabetical order, regardless of the album sound in. Is it possible to do this with my device? I've been looking in the menus on the camera itself and on this forum, but so far without success.

  Thank you!

  You can see all the songs by an artist when choosing the artist, play together, and then pressing the button at 6 oclock and choosing back to the music list. The song list will however in alphabetical order. They will be in order, based on the album order, IE. first albumm 1 (based on the number of track), the song2 song, song 3,... Finally, the second song on the album 1, 2, song etc.

  Would be nice if they could be presented in alphabetical order. I guess as a workaround you could try to put all the songs by an artist in one folder, then by browsing the folder using music files. Lists all the songs by an artist alphabetically (asuming the file name is the name of the song). I guess this could become unmanigable but when you have a large number of songs of an artist. Having too many songs in a single folder can bog down the player.

• How to list all the users on the Windows 8 Pro welcome screen

  I work for a small company based in the House of my boss of IT services. Because he runs the company, all the computers in the House are on a domain Active Directory (ease of management and control). Because he runs the company from his home, several of these computers are tablets/touch screens for his children, all upgraded to Windows 8 Pro.

  Currently, the default behavior of Windows 8 at startup is to display the Welcome screen showing the last user who opened a session with an option to switch to another user. If "Other user" is selected, a complete login prompt appears requesting a user name and password. This is standard fair for Windows 8, especially on a domain.
  He wants to do me is to find a way to allow a style of Windows XP (workgroup) Welcome screen displaying all the available avatars with user accounts, allowing so a child to click easily their user account and enter a picture password without ever seeing the on-screen keyboard.
  To rephrase: we want the Windows 8 Pro welcome screen to list all the (or specific, if possible) allowing anyone of you users connect to the computer without entering a user name and only enter a password (or picture password).
  I searched the web carefully and it seems that Microsoft can have deprecated this feature in an update of Windows 7 - many people shouting right lose their old welcome screen after an update. I read in the case of registry (removal of corrupt profiles and .default) hacks, security policy settings (interactive logon: do not display last user name = disabled), account policy (control userpasswords2 > uncheck: users must enter a password...) and a few other suggestions that had mixed results, which none apply to the present case , either because the settings are already in place, or because they are not available due to being on a domain.
  I'm open to exploration of any kind of registry or 3rd party software hacks that can provide this functionality. Win8 default behavior is absolutely horrible for tablets - it should be easy for multiple users to connect to a device without using a screen keyboard to enter their username and password. WIN8 is halfway there with passwords of photo, but we still have to enter a user name for all, but the user recently.
  Thanks in advance!

  Hi Jayce Nornin,

  Please be informed that he has no option to list all the users on the Windows 8 Pro welcome screen.

   

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

  Thank you.

• Using {module_data}: is it possible to get all the customers who are subscribers to 2 specific secure areas

  Using {module_data}: is it possible to get all the customers who are subscribers to 2 specific secure areas?

  That is to say: the list of all customers who subscribe to the secure area 51 and 6387 id.

  I am trying the configuration that you can see in the link below but is not working - I think that each customer is listed separately for each secure area, rather than listing a single customer and subscribed them to safe areas.

  2015-10-02_16-01 - 54.png - Google Drive

  I want to all clients in the CRM that match the criteria, not just check if the user matches the list.

  I can get it working for a secure or using GOLD, but the operator AND does not work in this case.

  Any thoughts?

  Do I have to run two separate (one for each secure area) calls, then compare the two somehow? Keeping in mind the 500 limit because it will look at the whole CRM.

  Hi Adam,.

  and do not work, as the system is testing to see if there is an object with two identity documents at the same time.

  What you can do, is useas follows:

  {module_data resource = "zonecustomers" version = "v3" fields = "customerId, IDZone" skip "0" limit = "100" = where = "\ {"IDZone": \ {"$dans": \ [51, 6387\] \} \}" order = 'zone ID' collection = "twoSZ" "}

  Yes, this will get duplicated in the result. Simply add the ID to a string, split to table and sort. Just made this to get unique products of 2 catalogs converted for your use case.

  EDIT (added a quick feature to find all of your customers)

  {module_data resource = "zonecustomers" version = "v3" fields = "customerId" skip = '0' limit = '1' where = "\ {"IDZone": \ {"$dans": \ [6524, 6664\] \} \}" order = 'zone ID' collection = 'howMany' "}

  {assign % max = howMany.totalItemsCount-%}

  Total customers: {{max}}
  

  {% assign limit = 500 - percent}

  {% assign moduloCheck = max: modulo: limit %}}

  {% If moduloCheck == 0 %}

  {% assign totalPages = max | divided_by: limit %}}

  {% other %}

  {% assign totalPages = max | divided_by: limit: more: 1 %}}

  {% endif %}

  Total pages: {{totalPages}}
  

  {% assign string = ' '-%}

  {% for i % (0.totalPages)}

  {module_data resource = "zonecustomers" version = "v3" fields = "customerId" skip = "{{limit |}}"} "{{time: I}}" limit = "{{limit}}" where = "------{'IDZone':------{'$dans':------[6524, 6664\]------}-}" order = 'zone ID' collection = "twoSZ"} "

  {% for article on twoSZ.items-%}

  {capture string %} {{item.customerId}},{{string}}{% endcapture-%}

  {% endfor}

  {% endfor}

  {% assign array string = | split: ',' |} Tri-%}

  {% assign UniqueId = ""-%}

  ID sorted

  {{ array | json }}

  {% assign index = 0-%}

  {% for a table-%}

  {% If index ==-%}

  {capture UniqueId %} {{a}}, {{uniqueIds}} {endcapture %}

  {endif %}

  {% index assign = a %-}

  {% endfor}

  Your customers

  {{ uniqueIds | split: "," | sort | json }}

  I had over 1000 clients. For me it loads quite fast...

• Is it possible to keep all the brush strokes, textures and layers of Adobe iPad drawing apps to illustrator CC?

  First of all, I want to say 'Hi' to everyone, because I am a completely newbie in this forum !

  As I am more in love with the design of the apps on my iPad 2 air and as a user of Adobe CS6 Adobe illustrator, I am seriously considering subscribing to CC Illustrator just to fully evaluate all my drawings of iPad in vector format instead of getting jpg or png files.

  Is it possible to keep all the contours, textures and layers EXACTLY as the original drawing of drawing Adobe apps, like Adobe draw or sketch of my iPad to illustrator CC?

  I actually downloaded the trial version of Illustrator CC, I noticed that the workflow is a little different from CS6 (with CS6, I use the trace of the image) and I can send the drawing directly to illustrator CC, but I've always had a PNG / jpg picture I need to work more with the following steps to turn to a vector format true :

  Object > sketching and line drawing > expand path

  and of course all the layers went with the method above. And all original textures and the brush strokes are replaced by the command-line images...

  And when I open a file in Photoshop, sketch a "version 2 of the adobe photoshop sketch file format is not supported in this version of adobe illustrator" message and the file that can open but was in jpg / png?

  Did I miss something? Or it's because I don't have a full subscription to CC? :/

  Simple question first:

  The error message does not appear to say anything - just click 'OK' and it works fine for me.

  Regarding the conversion of the brushes and work, it's a little more difficult.

  In Illustrator, (on my test), features all had a generic brush applied.   To get a better brush, I just clicked on the route of the path and then choose a new brush.

  AND

  If you use Adobe Brush (mobile application), you can design your own brushes and their port on Photoshop or Illustrator.

  BUT

  There are some things that I wasn't expecting with Adobe Illustrator brush that I had not experienced in Photoshop and use with Sketch/draw lots

  The brush behaves differently in applications, so when you're in Adobe brush, there are buttons to help you see how it will look in different applications.

  MORE

  I can't figure out how to get my 'BASIC' brush library to synchronize with my CC Illustrator brush library.   I probably shouldn't have saved my brushes in there?

  If you are planning a workflow from the sketch to the Illustrator, save your brushes in a custom library of CC (on your iPad), then the answer is: sort of.

  Sketch brush behaves a little like Illustrator brushes, but it seems to be a png or another bitmap.

  The brush for Illustrator is vector.

  You can't record two.  I can't understand how you can duplicate, but you can change it back and save it.

  Brush, create your personalized Sketch brushes.

  Make your Illustration

  Send your Illustrator Illustration

  Return to the brush, convert your brushes for Illustrator

  go to Illustrator, convert your artwork in vectorized text

  in the brush library, download and apply your custom brushes.

  It is NOT optimal, but it works.

• Is there a way retroactively copy all the text highlighted?

  I pointed out the text in a pdf document without activating the function "copy the text selected highlight... ». Is there a way retroactively copy all the text highlighted?

  Yes, it is possible to do it with a script (in most cases). I'll send you a PM with more details.

• After Udating all the text missing in the player Application

  After you install the latest player Adobe in XP SP3, I noticed that whenever I want to print the print dialogue box of IE8 is missing all the text for the buttons, labels, etc. Then, I went to open the player to change the settings and the entire application lacks any of the text, including the title bar, buttons, labels, everything would have all text is completely empty. I tried to uninstall, running own Adobe and reinstall, all with no effect. Someone suggested the police Segoe UI is perhaps missing, and after the installation of those it is without effect. Then I uninstalled 11 and installed version 10. After that my IE would go at all, he begins to Flash on the screen and disappear. I had to uninstall the reader just to get my browser to run again. I really hope someone has a solution for this soon.

  Thank you

  PS: Adobe has any real Reader tech support?

  Since the last update of the player took place at the same time as Windows Update, it is possible that the combination of those that might have caused your problem.

  If I had the same problem (which I don't have on any of my XP system), I would

  • uninstall Adobe Reader
  • perform a restore of the system to a time before the reader / Windows Update
  • Install the latest version of the player

  then check if the drive works normally.  If so, run Windows Update.

  David40The Real wrote:

  PS: Adobe has any real Reader tech support?

  Only if you pay $39; See at the bottom of http://helpx.adobe.com/contact.html?product=acrobat&topic=using-my-product-or-service

  Or you can use the cat on the same page.

• (PS CS3) Select all the text to change the fill color?

  I have a graphic with text: the text was not inserted by Photoshop, and it is not available as text; It's just a part of the graph.  I would like to change the color of the text.

  I can select each letter and each block of punctuation, etc. by using the magic wand and shift + click on each element.  Is it possible, however, simply select all the text - or at least a line full - with one or two moves or orders, vice boredom with a click on each letter, comma, I dot and so on?

  Ed

  If all letters are the same color, magic wand selects all with a click on a such contiguous is disabled in the panels of options at the top of the screen under the main menu.

• All the text unreadable when I start Firefox

  When I restart my system Windows 7 and you run Firefox for the first time of the day, all the text is unreadable, as if all the letters of the words are compressed into a single space. This includes the tab names and text Web site. I think the screenshot that explains it better. When I quit firefox and run it again, the problem disappeared.

  Generally, we associate these problems of rendering with hardware acceleration.

  It can also be a problem with certain fonts that resolve to a reason any after a reboot.

  You can do a test of fonts to see if you can identify the corrupted fonts.

  • http://BrowserSpy.dk/fonts-Flash.php?detail=1

• Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?

  If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.

  Best regards

  Q

  Hello

  It may help to place your watch in mode do not disturb before driving:

  -On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.

  You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.

  -On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.

  To send comments and/or service requests to Apple, you can submit the form here (all comments are read):

  https://www.Apple.com/feedback/watch.html

  (This is a supportive community focused on user - you don't talk to Apple here).

• Using Sansung S3, not yet possible to share all the tabs opened (using NFC) with another phone NFC. But only the a main tab, I'm currently browsing is possible.

  Sansung S3 using, Android 4.1.2 Firefox 24.0; not yet possible to share all the tabs opened (using NFC) with another phone NFC. But only the a main tab, I'm currently browsing is possible to share. It is the function of current NFC function of Firefox?
  If so, when will it feature to share all the tabs?
  Thank you.

  I don't know if we implement this. Sharing of all the tabs you have open have many security and privacy issues. Someone forget that they had a tab open, they didn't want to share or miss-clicks on the sharing of all the option.

  We are looking for ways to better share tabs with devices that are located nearby. Especially if they are on the same WiFi network.