Is it possible to operate the Portal 9.2 application on non-weblogic servers approx.?

Similar Questions

• Is it possible to operate the 6i with Oracle 11 g Oracle application?

  Hello
  
  
  We run 6i developer oracle application (6.0) of oracle database 10g.
  Due to certain management decisions, we are with the intention to upgrade the database to 11 g.
  
  So, tell us what is it possible to operate the 6i with Oracle 11 g Oracle application?
  
  
  Kind regards
  fazijee

  See also the note of Support of Oracle

  Is 6i forms/States certified to work against Oracle Server 10 g Rel 1, Rel 2 or 11gRel 1, Rel 2? [338513.1 ID]

  6i is not certified or will be certified against 10.2 and 11.x

  Hemant K Collette

• Is it possible to change the URL of an application?

  Hi all

  I was working with oracle apex and created some applications almost a year back, due to my graduate studies, there is a discrepancy with the tool... and finally I am.

  Plan to create an application that will be similar as a personal Web site. My question here is... If it is possible to change the URL and keep a single which includes my name too

  instead of having this great...

  http://Apex.Oracle.com/pls/Apex/f?p=10221:1:116416608594529

  I understand that the entire URL described page n ° no lettering and the session but ID its my doubt possible or not... If possible then how to proceed?

  Thank you

  with respect,

  Robette.

  Thanks for the reply of Tony!

  Exactly, you got my point... that's what mean...

  I want to create a personal web application in the oracle apex and be hosted in another site with a pretty URL (say xxxxx.com... If the URL includes a part of my name which is very appreciated) so that everyone can check out my page and if needs I can include this URL in my RESUME, but I understand that for my own use. Why I'm preferring apex Oracle, I just want to remind the old concepts and practical tip that is there.

  If this is not possible in Oracle apex. Could you please suggest an idea... ?

  Once again thanks for your reply very...

  Kind regards

  Robette.

• Is it possible to operate the USB TC-01 Labview 7.0 Express?

  I have the device of thermocouple USB TC-01. I installed DAQmx 9 and is recorded in «Devices and Interfaces» However, the sample code provided is written in Labview 8.1 and I'm under 7.0Express - is it possible to run in 7.0 (I can't find a vi to interface with it)? If so, someone has the code example and/or can convert the code example to 7.0? Thanks in advance

  Paul

  The latest version of DAQmx for LabVIEW 7.0 is the version 8.1. The Readme for 9.0 also claims that the 7.0 is not supported.

  Good reason to finally make a long delay LabVIEW upgrade.

• Is it possible to operate the clusterware without ASM? (on OEL 5.5)

  Hi all
  
  I want to have a scenario of simple failover with database Oracle 11 g supports EBS 11i with 2 nodes on OEL 5.5 times. Because Oracle doesn't support LVM in clustered environment, I intend using OCFS2. I prefer not to use ASM and don't want any fancy follow-up services. I basically would like the package to mount the file systems and start the virtual IP address and be able to manually switch to another node, if necessary.
  
  Is it possible to run without ASM on straight file system or clusterware requires ASM?
  
  thnx!

  >

  Is it possible to run without ASM on straight file system or clusterware requires ASM?

  It is possible without the ASM. You can run it on OCFS.

  Concerning
  Rajesh

• Is it possible to change the installation location of applications Adobe Creative Cloud like Illustrator or Photoshop?

  Only, I left in my OS drive 20 GB and can not find a way to install applications like Photoshop or Illustrator on my other hard drive!

  Please see:install directory change request

  I hope this helps.

  Concerning

  Megha Rawat

• Serve the application automatically under Weblogic servers logs

  Hello
  
  I am studying serving them in Weblogic server.
  
  Could someone help me to find a setting (if it exists) in Weblogic properties files, which will serve the application automatically logs after "n" number of days.
  
  
  for example, in the D:\Hyperion\deployments\WebLogic9\servers\aas\logs directory, I see many eas log files created with the extensions of .log00001 to .log00427. Is it possible to remove these automatically without using windows scripts.
  
  
  Thank you
  Prasad

  This is configured in the logging of every server (servers-> servername-> logging) tab. Set the type of rotation for 'Time', to keep files and rotation interval (default value of 24 hours), etc. This will keep the files to a fixed number.

• Get the problem when configuring Application adapt to Weblogic

  Hello
  I am following this doc http://docs.oracle.com/cd/E15523_01/ doc.1111 /e17054/install.htm for installation and configuration of Application Adapter for Oracle Weblogic Server, but since the Application Explorer, I get the following error.
  
  http://3.BP.blogspot.com/-X1S8b2rDYMk/UWuirzDovXI/AAAAAAAAAiI/X_zxgu_LDfM/S1600/AppExplorer1.jpg
  
  It's the application Explorer command line
  
  http://2.BP.blogspot.com/-s-NephexVVI/UWuitzLcmvI/AAAAAAAAAiQ/aa2miqdccq4/S1600/AppExplorer2.jpg
  
  Please help me with this problem.
  
  Thank you
  
  Nasir

  Hello.
  Well, it seems that you have active is the application of the JCA, not the Servlet IBSE.

  Could u pls try to make a JCA connection?

  Follow this doc http://docs.oracle.com/cd/E14571_01/doc.1111/e17656/config.htm#BABJIDGD

  The best

• Would it be possible to implement the application using DPS calculator?

  Would it be possible to implement the type of Calculator application using Adobe DPS that accepts a user input and pass it to the webservice API and displays the result.

  It can be done using html and java script. Message me if you want that I like to share an example.

• Cloning of the Apps 11.5.10.2 to new servers

  I'm trying to migrate our new servers in a completely different field configuration, etc.. Never cloned before much less attempt to define new servers.
  
  I have cloned DB on and working properly. I then installed the infrastructure (he never asked about the DB connection settings, do not know if she had yet)
  
  I have all the directories as detailed in doc 230672.1 settles more and expanded in the new appropriate places.
  
  When I run adcfgclone.pl appsTier I get the following:
  Enter the password [APPS] APPS:
  apps_pass
  
  First create a new context for the cloned system file.
  The program will ask you for information on the new system:
  
  ERROR: creation of context not completed successfully.
  Please check for errors in the /tmp/adcfgclone.err file
  ---------------
  The adcfgclone.err file contains just
  
  ./.. JRE/1.3.1/bin/Java[21]: / usr/bin/basename: not found
  getconf: unrecognized variable 'CPU_VERSION '.
  ./.. JRE/1.3.1/bin/Java[156]: / usr/bin/grep: not found
  ./.. JRE/1.3.1/bin/Java[175]: / usr/bin/grep: not found
  ./.. JRE/1.3.1/bin/Java[217]:. /... JRE/1.3.1/bin/... / bin/PA_RISC/native_threads /: cannot run - is a directory
  
  
  At this stage I have to configure dbc files to point to the new servers/ports etc., the instructions do not say I do, but I am at a loss. The/usr/bin/basename does not exist on the source server either so I guess that's looking for something else but I don't know what. I have a skip when you unpack the files before running adcfgclone.pl?
  
  Thanks for the comments

  Hello

  The portal with Oracle Applications 11i configuration steps are documented in (Note: 305918.1 - using Oracle Portal 10 g with Oracle E-Business Suite 11i).

  Thank you
  Hussein

• Already registered on the portal OnPlus - cannot add a device already enabled/customer

  Hello

  I am registered on OnPlus.

  Then my colleague registered and activated a device.

  I could not activate the device - even if my PC is on the same subnet and can connect to it very well (with the password provided by my colleague).

  When he sends me an invitation for the device - it takes me to the registration page.

  If I get my information from record (again) - I get (not surprisingly)...

  "We had a problem with your submission. Please correct the following errors. This user ID is already registered. »

  Still-, there is no choice because "I am already registered.

  When I connect OnPlus and try to "Add Customer" - I put in the details, then it goes to the activation screen with

  "CustomerX / status".

  To activate this client:

  Install the Agent network OnPlus on the premises of the customer and connect it to the LAN client.

  Turn the Network Agent OnPlus the switch zipper on the back panel of the Network Agent OnPlus.

  If your computer is connected to the same network as the network OnPlus Agent, click on the button activate now below.

  Otherwise, follow the instructions for activation in the guide getting started for the Cisco OnPlus Network Agent.

  Activation for this customer information are:

  Activation ID:... »

  If I click on activate it says

  "Unable to determine a local IP address for all Agent OnPlus of network into your current network.

  Check that the Network Agent OnPlus is connected to the same local network as this browser. OnPlus Network Agent must be on the same public WAN IP address (203.25.x.x) in your web browser block current.

  Not enabled OnPlus network Agents will attempt to disseminate their IP up to 30 minutes and if successful will appear here for 4 hours. Try to stop power OnPlus Network Agent if it has been online for more than 30 minutes.

  Verify that the DHCP service is running on the local network so that network OnPlus Agent is able to acquire an IP via DHCP. You will be able to change Agent of the OnPlus network to use a static IP address if you choose to (recommended), but the DHCP service is required to access the Network Agent OnPlus start.

  Ensure that DHCP clients can route to the Internet.

  If the Network Agent OnPlus hosting site has multiple WAN paths to the Internet, try refreshing this page. Your browser must Access this page from the IP WAN as the Agent of OnPlus network address. »

  We even tried power cycling it, and I'm definitely on the same subnet.

  There was no possibility of entering an IP address no matter where manually - process regarding the "Impossible to determine an IP address local for all Agent OnPlus network on your current network."

  I ping the device and even connect to its graphical interface. It simply does not appear as any way to add this unit to my own account on the portal OnPlus.

  That please?

  Hello Brett.

  The On100 device can be associated with a single customer and a customer cannot exist in more than one Agent account. From your description, I understand that your colleague registered as a OnPlus Agent, created an account customer, and then active the On100 device under this new client.

  However, it is possible for you to have access to the customer site by becoming a sub-agent under account OnPlus Agent of your colleague.  And according to the description above, it seems that your colleague has already sent you an invitation to become a subagent.  The problem now is that you have previously registered your EAC as OnPlus Agent id.  It is not possible for a single CCE id or an Agent and a secondary agent in the OnPlus portal.

  To allow your registration as sub-agent, we remove your EAC to your portal id.  It is a manual step that I am happy to help you.  Simply unicast your Agent account information to [email protected] / * / .  Once I take off your CEC id you will be OK to complete the registration of subagent.

  Here's some more information about the creation of the sub-agents in the portal OnPlus.  A previous post jamwyatt courtesy of response:

  In the account that contains the Agent network ON100, you can add other agents, on invitation. On the overview page, there is a menu agent at the top that will allow you to invite the officers. Once you invite an agent, and they sign up, they will be able to see the same view you see. The design intent is that you set up a master account for your business, then you invite other employees and contractors to adhere as agents of this account. Each guest will need a Cisco ID and once that they sign up, they will have to be approved by the owner of the main account (same menu agent, selection "of Agents in waiting"). Using this approach, the owner of the company retains the main account and allows you to manage completely all agents.

  Kind regards

  -r.

• Cisco authentication at the portal comments disabled ISE

  Hey you...

  How to disabled authentication in portal invited to end users? Is it possible? We have customers who have the laptop with group policy, which allows to not show my feedback portal.

  TKS

  I do not understand your question... they have a GPO that prevents the user to see the guest SSID?  If so, you can't do something about that and have remove this restriction of group policy.  If you're talking of end-users did not pass by the portal page, then your is it connect to other SSID or circumvent your doing a mac.

  Scott

• Customizing the portal of VMWare View 5 Page

  HELO all,.

  We test Vmware view 5 for an implementation of the medim scale possible. We have all the settings and it works fine. There is one thing that the sentence is me: the Portal Page. Normally, the portal page tells you that you must install the client and it redirects you to the Vmware View client download page. I managed to find documentation that tells you how to customize and I had to show him a few links that will download the client to our own server. I have attached a screenshot with where I am now (vmwareviewcurrentportal.jpg) right; What is the best... but watch some training videos, I noticed that, after the trainer install Vmware View connection to the Portal Services looks diferent (in a better way). I've attached screenshots of what its like (VmwareViewDesiredPortal.JPG) looks like w.

  Essentially: it has radio buttons in the software selection and a download button. After choosing your Customer Portal redirects you to a page (VmwareViewDesiredPortalInstructions.JPG) of the instructions.

  -I know that it is a kind of model because the images to help guide are stored in C:\Program VMware View\Server\broker\webapps\ROOT\portlets\client\images on the Vmware View connection server.

  The question is: how setup/activate this portal? Any help would be greatly apreciated.

  Thank you

  Adrian

  Fear not, we stayed at a compatible screen for all types of customers. I'm sorry.

• Several attachments in the portal application form

  Hi guys,.

  is it possible to attach more than one attachment on a portal application form? I know after you have submitted the form, users can join objects, but in the form itself, the attachment field only allows you to point to a file. I tried to put a field attachment double on the screen but he transferred more than one attachment.

  Thank you

  Simeon

  The portal manage a file as an attachment. Need an improvement would be asked for several files. One solution would be to compress multiple files into one.

• The Portal installation, Weblogic11g and Webcenter

  What are the minimum of weblogic components required for installation of portal and Webcenter?
  
  Published by: user12220476 on April 23, 2010 06:47

  Hi Michael
  1. it looks like you need some kind of Single Sign-On configuration to do so once the user connects to the LAN, it is treated as a trusted user and can connect to WLP or any other application. I only did this for the LAN, but did SSO for external authentication system. Of oonsole of weblogic security realms-myrealm-> providers tab >-> creates a new SAML2IdentityAsserter. For this new add "Web Single Sign-On identity provider partner and imported the SAML 2.0 metadata file provided by this partner of external authentication." Then from domain-> server-> Services Federation tab-> set Admin general SAML2.0 and SAML 2.0 Service Provider. Post this question in the Weblogic Security Forums. Someone may have already done what you want to achieve.

  2. for the second question, I think I know now you have groups, roles etc in Oracle Portal (NOT of Weblogic Portal), but the old Oracle Portal. You have users in MS AD. Now, you want to import these Oracle Weblogic Portal Portal groups. It is not possible. Because the structure and groups of way etc. of maybe not same as stored in the Oracle Portal roles in the Weblogic Portal. WLP, of all groups, roles, rights are stored in files of LDAP (tillage front of WLP 10.3.2).) But at WLP 10.3.2, it seems that LDAP is not used but rather stored in the security database. Migration in a direct way is not possible. You have an option. You can create groups, roles etc in MS AD itself (see if Oracle Portal has a way to migrate the Oracle Portal to external ads). I'm not familiar with Oracle Portal.

  Once the users, groups, roles exist in MS AD, first configure MS AD of Weblogic Console and you will see all the groups and users in the weblogic console. In portal Admin Console, you can create roles right visitor and add these MS AD groups to these roles, and then assign these roles to the various parts of the portal like books/Pages/Portlets, etc. in the rights tab of the visitor. When the user connects, this engine of rights be trigerred and it can access only the resources of the object.

  For the first question, post it in the Weblogic Security Forums, you can get much better ideas.

  Thank you
  Ravi Jegga