Is it possible to repair a broken zip file?

Similar Questions

• Zip file and iso LabVIEW FPGA Xilinx tools 12.4 Module is broken

  I downloaded the two zip file of LabVIEW FPGA Module Xilinx tools 12.4 and iso image file three times to make sure that both files are broken and can not be installed!

  

  The size of the file is so large about 3g. It would be better to double-check before you download on the Web site.

  -Very well,.

  The download is complete and the standard Windows Extraction tool worked, WinRAR worked and 7Zip worked (and no, I don't know why, I installed all). I did download a wireless network that does not have direct access to our internal servers, it should therefore be a test valid. If the link I provided above was not that you used (probably isn't, because it is not an ISO option), could you please provide me with a link to the page that you used so that I can test and repair? In the meantime, the link above should work for you.

• Possible to repair permissions on the external hard disk drive?

  I use the Mavericks. Is it possible to repair the permissions of the drive on an external hard drive?

  Why would you want to? Just put the reader to ignore the ownership and permissions.

• Satellite M70: Is it possible to repair the MBR through recovery CD?

  Hi, I do not know where should I post. I have Toshiba Satellite M70 and I want to ask if it is possible to repair the MBR through recovery CD) just as you can do with the XP CD.

  Thank you.

  Hello

  As far as I know that something like this is not possible. Recovery media can be used to restore the BONES together. This is an image and there is not some kind of repair option as the CD-ROM of Microsoft full version installations.

• LabVIEW FPGA Module Xilinx tools 12.4 zip file is broken

  When I download the tools from Xilinx compilation by http://joule.ni.com/nidu/cds/view/p/id/2592/lang/en, I am able to download a zip file of 2.25 G, but when I try to unzip it or open it, the file is broken. I'd appreciate any help I need emergency compilation for LV 2011 these tools.

  The file has been fixed.

  Thank you.

• Does windows startup repair fix broken, corrupted system files regardless of the situation.

  Start Windows 7, 8 repair fix broken, corrupt system files, even if windows does not start successfully?

  It's the right tool, initially, to use to repair the corrupted system files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7, or Windows 8.
  http://support.Microsoft.com/kb/929833

  See "cannot repair Member file file details.

  "This entry indicates that the content of the file does not match the definition of operating system for the file. In this case, the SFC.exe program cannot repair the file. »

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  See "step 2: If the System File Checker tool cannot repair a file.»

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
  http://support.Microsoft.com/kb/929833

  If the failure of File Checker system in that these options are set.

  Most of the new machines come with a recovery partition, allowing you to return your purchase, you will need to check your user guides (or the manufacturer's Web Site) for instructions.  Choose this path requires you to save all the data first.

  These options are also integrated to Windows 8.

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  A way to not lose data is to make backups of data.

• Library content zip file download link seems to be broken?

  Download link for the zip file of the library still doesn't seem to work.  If you go to http://helpx.adobe.com/encore/using/download-library-content.html and click on "English", you get a Page not available error.  Other languages seem to be broken too.

  Thanks for your help!

  Working for me earlier... Did not seem that it was important to know whether or not I was connected.

• NDK 1.0 for Mac zip file is broken

  Tried downloading the NDK 1.0 zip file several times with different browsers, but the built-in archival utility Snow Leopard or Zipeq can decompress.  Archive only said: he cannot do.  Zipeg says it is an unsupported format.  I had no problem uncompressing the betas.

  Problem solved, it was a quick!

• I can not open zip files!

  I had this problem since day 1.  Whenever I get a zip file, Vista will not open the file instead, he associated with Internet Explorer and sends the computer into a loop of windows which can only be stopped by stopping turn signals.  If I associate the file with any other program, it opens not and goves me a message that the content is unreadable.  I do not get an option to "extract files".

  Help!

  Bschum

  Go to: http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and scroll down to the ZIP entry and click or double-click on it to launch the association of Zip files repair.  Then restart.  Zip files should now behave as usual.  You will still be able to use 7 - Zip instead of Vista if that is your choice.  All you have to do is change the file association by default for the ZIP files to 7-ZIP inntead of Vista.

  If you have this problem withall the speed of your program, Diecut for entry EXE click or double-ICCT top to run the EXE file association repair.  This should solve the problem of all programs to open under internet explore (if that is the case - I'm not sure I quite understand your situation).

  If the programs are open OK but the problem is that all the icons are all the internet Explorer icons, then perform a rebuild of the cache icon as follows:http://www.vistax64.com/tutorials/117229-icon-cache-rebuild.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• display zip files... what should I do now to see the content of my zip file?

  Sir ihave downloaded songs on the internet that is downloaded as a zip file format... and I have change the path of the zip opening and is open with internet explore form.and, now when I open my file zip my scenn begin to blink heavlyy after that I have to do my computer turn off or restart...

  What should I do now to see the content of my zip file?

  Please help me...

  You must extract the files zip first and then open it with a program that can open that particular file type.  So in this case, even if you use Internet Explorer to download files, you must use Vista to extract to the desktop (downloads or music where ever you choose) by right-clicking on the download, unzip the folder and create a new folder with the decompressed files and then you can use WMP or any program you use to play the songs.  But it does not work because of the changes that you did - but we can fix that easily enough.  It happens quite often with many different programs (ZIP especialliy because a lot of people care less about the ZIP of Vista program and cause problems in trying to change).  I suggest that you pay attention to what we're about to do what it will be probably useful more than once to you later for other types of files (I use it often, but I use it often when I install a new program and do not have default values, he created).  Although the first procedure is for most of the types of special system files and so generally used only for repairs (with the exception of ZIP), the second (if you actually need to use it) works with all other types of files.  I recommend that you create a new folder in the Favorites, called "File Association Changes" and add these links so that they will be easy to find if you need again.

  Here, the first thing we need to do is Zip file association fix it back to Vista of Internet Explorer.  Go to:http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and scroll down to ZIP and then click or double-click on it to run the program that will reset the association back to its default values.  If you don't like the Vista Zip program, I recommend trying 7 - Zip free but excellent:http://www.7-zip.org/.  If you wish, set as the default zip file by using the following:http://www.mydigitallife.info/2008/06/20/how-to-edit-or-change-file-type-or-extension-associations-default-programs-in-windows-vista/.  If you wish, you can add send to 7 - Zip to the right-click context menu as follows:http://www.vistax64.com/tutorials/67599-send-context-menu.html.

  Once, when you find a zipped song you want, download it to the desktop or wherever you choose and use the 7-Zip program (depending on what you set as the default value) is the Vista to unzip the file, and then save the decompressed everywhere song where please.  You will now be able to play with any player you who manages songs with this type of file (if you click twice on the song, it should open the default program and start playing automatically).  Now you can do what you want with the original zip file you have now the actual file - you can save it if you want (although I don't see why you need to do when you have the actual file) or you can simply remove as needed.

  That's all. The problem should be solved and you must use the program ZIP Vista or 7 - Zip to unzip all zipped files or folders (downloaded or received as attachments to emails, or transferred by a flashdrive or however obtained).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• problem by opening the Zip file

  I have 8.0 Zip when I create a zip file and open the zip file all show but open in notped.

  The possible Zip files were dissasociated and rather associated with Notepad.  Go to start / Default programs / high a file or program with a Protocol / and go to .zip files.  It shows probably associated with Notepad.  Go to the following link: http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and select the zip file option file and run it to reset the association of zip files.

  If this does not work, install 7-Zip http://www.7-zip.org/ one good program free Zip.  This should establish associate files with 7-Zip Zip (OK this action if requested).  Then, use 7 - Zip to open the Zip file.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Retrieve snapshots after broken vmx file has been restored

  I'm running a Win7x64 Machine (host and guest) with Workstation 7 and I came across a problem after a failed to stop... after that my host system restarted I could not start my guest operating system that the vmx file was broken.

  I created a new machine virtual and added the original virtual disk (vmdk) and could restart the virtual machine. It was only after restarting when I realized that I've revertet to the initial state of the virtual machine and all the changes that I stored in snapshots disappeared.

  So I tried to do the same steps again and instead of using the original vmdk, I tried to use the one of the last snapshot. But this was not possible (the virtual disk parent has been changed since the child was created)

  Can I do to solve this problem? the parent disk was not changed at all, but I guess that the initialization of the system created new logs etc...

  Please download the attached zip file
  extract and replace "Windows 7 x 64 Edition_workstation.bin"

  then run the cmd

  DSFI.exe "Windows 7 x 64 Edition_workstation.vmdk" 512 1024 "Windows 7 x 64 Edition_workstation.bin.

  Please note the small change in cmd!

  When you're assigning the file "Windows 7 x 64 Edition_workstation - 000004.vmdk" to your VM or simply use the vmx file attached

• Firefox won't download a zip file

  There is a chat Board that I belong, and they published a zip file. It looks like a white sheet of paper with a folded corner and said zip on it. When I put my cursor on it, this kind of moves upward and says so at the bottom, the name of the file and then the file. 260K zip, but I can't click on it so that it can download, save, open, reject, nothing.
  I think I downloaded the zip files in the past, but for some reason some can't upload this one.
  Can anyone help please.
  I use a Toshiba laptop with windows 7 service pack 1
  The application databases

  Name: Firefox
  Version: 25.0
  User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; RV:25.0) Gecko/20100101 Firefox/25.0

  Extensions

  Name: ModPlugin
  Version: 1.0.1159
  Enabled: true
  ID: {31d88f70-c791-42d8-8187-faaf71d42f67}

  Name: AVG toolbar backup
  Version: 17.0.2.13
  Enabled: false
  ID: avg@toolbar

  Important change preferences

  accessibility.typeaheadfind.flashBar: 0
  Browser.cache.Disk.Capacity: 358400
  Browser.cache.Disk.smart_size.first_run: false
  Browser.cache.Disk.smart_size.use_old_max: false
  Browser.cache.Disk.smart_size_cached_value: 358400
  browser.places.smartBookmarksVersion: 4
  Browser.Search.Suggest.Enabled: false
  browser.search.useDBForOrder: true
  browser.sessionstore.upgradeBackup.latestBuildID: 20131025151332
  Browser.Startup.homepage: google.com
  Browser.Startup.homepage_override.buildid: 20131025151332
  Browser.Startup.homepage_override.mstone: 25.0
  dom.mozApps.used: true
  DOM.w3c_touch_events.expose: false
  extensions.lastAppVersion: 25.0
  GFX. Direct3D.checkDX10: false
  GFX. Direct3D.last_used_feature_level_idx: 1
  network.cookie.prefsMigrated: true
  Network.protocol - handler.warn - external .dnupdate: false
  places.database.lastMaintenance: 1384482032
  places. History.expiration.transient_current_max_pages: 103914
  plugin.disable_full_page_plugin_for_types: application/pdf
  plugin.importedState: true
  plugin. State.npqtplugin: 2
  privacy.sanitize.migrateFx3Prefs: true
  Security.mixed_content.block_active_content: false
  Security.warn_viewing_mixed: false
  Storage.vacuum.Last.index: 0
  Storage.vacuum.Last.places.sqlite: 1384311247

  User.js preference

  Your profile folder contains a user.js file, which includes preferences that are not created by Firefox.

  Graphics

  Description of the adapter: Mobile Intel (r) 4 Series Express Chipset Family
  Drivers: igdumd64 igd10umd64 igdumdx32 igd10umd32
  RAM card: unknown
  ClearType settings: Gamma: Structure of 2200 pixels: level ClearType RGB: 100 improved contrast: 400
  Device ID: 0x2a42
  Direct2D Enabled: true
  DirectWrite Enabled: true (6.2.9200.16571)
  Driver date: 25/08/2010
  Driver version: 8.15.10.2202
  GPU #2 Active: false
  GPU accelerated Windows: 1/1 Direct3D 10
  Vendor ID: 0 x 8086
  WebGL Renderer: Google Inc. - ANGLE (Mobile Intel (r) 4 Series Express Chipset Family Direct3D9Ex vs_3_0 ps_3_0)
  windowLayerManagerRemote: false
  AzureCanvasBackend: direct2d
  AzureContentBackend: direct2d
  AzureFallbackCanvasBackend: Cairo
  AzureSkiaAccelerated: 0

  JavaScript

  Incremental GC: true

  Accessibility

  Enabled: false
  Prevent accessibility: 0

  Versions of the library

  NSPR
  The expected minimum version: 4.10.1
  Version: 4.10.1

  NSS
  The expected minimum version: 3.15.2 based ECC
  Version: 3.15.2 based ECC

  NSSSMIME
  The expected minimum version: 3.15.2 based ECC
  Version: 3.15.2 based ECC

  NSSSSL
  The expected minimum version: 3.15.2 based ECC
  Version: 3.15.2 based ECC

  NSSUTIL
  The expected minimum version: 3.15.2
  Version: 3.15.2

  Are there any other similar downloads on the site that work, such as pictures, Word documents, etc., or are they all broken the same way?

  I was not familiar with the extension ModPlugin. It works on the site that has the problem? If so, could test you with the disabled extension? You can do this by restarting mode safe mode of Firefox, or manually in the page modules. Either:

  • CTRL + SHIFT + a
  • Firefox orange (or the Tools menu) button > Add ons

  In the left column, click Extensions.

  If this extension is not relevant for the site that has the problem, or if the problem persists after you disable it, can provide you a link to the site if someone could check it out?

• I opened 2 emails that were in the folder spam from my email and that each contained an attachment zip 2 k and 3 KB. As I could not open directly in my email, I opened the zip files with the "open in" another app option. At the opening of th

  I opened 2 emails that were in the folder spam from my email and that each contained an attachment zip 2 k and 3 KB. As I could not open directly in my email, I opened the zip files with the "open in" another app option. When you open the zip files at this other app asked me if I wanted to extract zip files in a new folder, I have accepted, in both files .js (javascript) files there. I opened these .js inside this same application files and content files white text on black background and that seems to be a script file. My question is: my iPad Air has been compromised by a scam of viruses, such as the Trojan horse thieves and banking password especially as Dridex or Dyreza, the Trojans and ransomware as Locky, cryptolocker, or Teslacrypt. If that were the case, then what is the solution to get rid of these... Thank you.

  Simply delete them. It is not possible to install anything on iOS using this method. For good measure, you can remove and reinstall the application allowing you to open it with, but I don't really have that is actually needed.

• "Extract all...". "request password on some files inside the zip, but no password was used to create the zip file

  I created a zip of a directory tree file using "send to...". "'Compressed (zipped) folder '. When I try to "extract all...". ", he asks me a password for some (not all) of the files in the zip file. I does not have a password for the zip file. I didn't even know it was possible to have a password on a specific file in a zip! Needless to say, I can not give the password because I don't know what it is.

  I tried the following:

  (1) created with "send to...". "Excerpt from" compressed (zipped) folder ', with 'extract all... '. ». Result: request password.
  (2) created with "send to...". "" Compressed (zipped) folder ", extract with 7 - zip. Result: No password query. All the files extracted intact.
  (3) created with 7 - zip, extract with "extract all...". ». Result: request password.
  (4) created with 7-zip, extract with 7 - zip. Result: No password query. All the files extracted intact.

  What I find most interesting is (3).

  Does anyone have an idea of what's going on? Is there some kind of security on the files meta-data that could / should cause this behavior?

  System information:

  XP Pro 2002 SP3 on MS network (I have no idea what server, etc..)

  Hi ruborg,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.