Similar Questions

• Download NI LabVIEW FPGA Module Xilinx Tools 10.1 2013 problems

  I'm trying to download the Xilinx tools 10.1 to use with a chassis 9113 in LV2011.  Based on this white paper, that the compiler below should work perfectly.  The problem is that I can't seem to download all the way.

  I can't seem to cross ~ 336MB using the standard or the downloader OR.  Any ideas?  Does anyone else have this problem?

  http://www.NI.com/download/LabVIEW-FPGA-Module-2013/4249/en/

  Thank you

  -PBD

  Well well... on the good side of things, you don't want 10.1 anyway!

  

  Virtex-5 LX50 FPGA<- requires xilinx="">

  10.1 is only for devices FPGA Virtex-II! (.. .after LabVIEW 2009 it was, just for all of you who read this know).

  so... try this link: http://www.ni.com/download/labview-fpga-module-2013/4248/en/

• NI Service Update: updates and Service Packs: LabVIEW FPGA Module Xilinx Tools 10.1 2012

  Hello

  I downloaded / installed the latest 2012 LV - everythin fine so far (his grand )

  OR-Update Service proposed the installation of a service pack - download and installation worked too.

  NOR-US also suggested to update the tools for FPGA from Xilinx module, but the download does not work. It looks that the download link is broken?

  Any suggestions?

  Another interesting question: I live in Austria (German), but we use Windows & LV entirely in English in our society. NOR-United States however is highly localized - even the description of the object is in German. While it is OK for me, I still wonder if I could change it to English too.

  (for the attachment: "Fehler beim Herunterl...) ("-"unable to download"online)

  -Benjamin

  
  

• Assessment module FPGA and Xilinx tools?

  I am currently using a trial version of 2013 LabVIEW FPGA module  When I Isaiah to compile my FPGA target, I go as far as to select the compile server.  Here, I am unable to use the local compilation server because "Xilinx 14.4 tools are not installed."

  I had the impression that Xilinx tools came with the FPGA module.  In the installation of FPGA module, I have yet to select install Xilinx...  What happens here?  Is happening because I'm only using a trial rather than a recorded version?  Or have I missed something?  Do I really need to get the Xilinx tools separately?

  Thank you!

  Sara

  Hi Sara,.

  It is indeed a separate installation program. Give this a go!

  OR LabVIEW FPGA Module Xilinx tools 14.4 2013

  http://www.NI.com/download/LabVIEW-FPGA-Module-2013/4248/en/

• Internal software error of LabVIEW FPGA Module - 61499

  I get the error next (in a pop-up window) in the phase of sompilation for the FPGA target with a vhdl IP. This error continues to occur even after restart LabVIEW and the PC. Someone at - it solved is this kind of problem before without having to re - install the software?

  Here is the error information:

  Error-61499 occurred at niFpgaXml_GetValue_String.vi<><><><>

  Possible reasons:

  LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has occurred. Please contact National Instruments technical support on ni.com/support.

  Additional information: lack the tag required XML (/ CompileServerList)

  As a first step, I can compile the vhdl IP node successfully. However, once when I'm running a VI with the FPGA, the bureau stop working. After that I restarted by force, it cannot perform the build of a vhdl IP node. Even without connecing to the jury of LabView, he pointed out errors before the end of the sompilation.

  Interestingly, the screw which also includes nodes IP vhdl that I properly compiled before, I can still run the VI to the Commission and it works correctly.

  Thank you

  Looks like your ActiveJobsList somehow has been corrupted. I saw occur when computers are hard stop or blue screen during compilation. I don't have that LabVIEW 2014 installed on my machine, so your path will be a little different, and the file extension will be a .txt or .xml instead of .json, but try this:

  Move the file "C:\Program Files (x 86) \National Instruments\LabVIEW 2014\vi.lib\rvi\CDR\niFpgaActiveJobList.json" (or your equivalent) out of the above directory (back it upward and delete essentially) and restart LabVIEW. Must regenerate the file and resolve the problem.

• LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has Unknown

  Sir/Madam,

  Note Labview 2012 SP1 installed about 2 weeks ago.,.

  Accident occurred during the compilation of an fpga vi who worked satisfactorally in the past.

  When I restarted and went to the message recomplile "LabVIEW FPGA: an internal software error in the LabVIEW FPGA Module" see attached picture of popup.

  I reinstalled Labview in its entirety and backed out the changes I made to the vi but still get the same message.

  Thanks in advance

  Daryl

  It turns out that the question was in the VI and not of LabView FPGA module as the message may indicate. I created a vacuum vi, cut and pasted items in this from the vi error and recompiled and it ran very well.

  Somehow the vi has been corrupted internally.

  Thank you it's fixed.

• 8.6 LabVIEW fpga module. Where to download this version

  I have Labview 8.5.1 and you have upgraded to labview 8.6 where can I download 8.6 Fpga Module?

  I have a license for module fpga 8.5.1

  Isutiger,

  All downloads evaluation directly from our Web site are always the latest version, currently of 2009. This ensures that users evaluate our software always software up-to-date.

  If you have a software maintenance (shared services provider, you get free one year every time you buy a software), you can login to the resource center of services (www.ni.com/src) and download of all supported versions, modules and toolkits for LabVIEW, including 8.6 and 8.6.1 the corrective update. You also have access to videos and tutorials.

  If you do not have a service contract (cannot log in to CBC), you want to communicate with your sales representative to discuss an assessment for older versions.

• NDK 1.0 for Mac zip file is broken

  Tried downloading the NDK 1.0 zip file several times with different browsers, but the built-in archival utility Snow Leopard or Zipeq can decompress.  Archive only said: he cannot do.  Zipeg says it is an unsupported format.  I had no problem uncompressing the betas.

  Problem solved, it was a quick!

• LabVIEW FPGA Module 2015 Compilation to PXIe7820 with 'no timetable '.

  I did a first compilation for the SMU with the Xilinx Vivado 2014.4 tool 7820 (64-bit). Compilation report said.

  Compilation successfully completed.

  Use of the device
  ---------------------------
  Total bands: 19.1% (25350 4848)
  Records of slice: 6.9% (13937 on 202800)
  Slice lUTs: 12.3% (101400 12430)
  Block of Rams: 0.9% (3 out of 325)
  DSP48s: 6.2% (37 out of 600)

  Calendar
  ---------------------------
  None.

  Compile time
  ---------------------------
  Introduction date: 16.07.2016 12:48
  Date recovered results: 16.07.2016 12:59
  Waiting time in the queue: 00:08
  Compilation of time: 10:16
  -Generate a Xilinx IP: 00:00
  -Summarize - Vivado: 04:18
  -Optimize the logic: 00:14
  -Place: 01:17
  -Optimize the Timing: 00:18
  -Road: 03:04
  "- Generate the programming file: 00:56.

  This means no timetable? The embedded clock's 40 MHz. It runs with this clock? Beacause 7833 compilations for the pci or pcie 7842 report displays the maximum clock time.

  Hello

  "none" means simply from what I can understand, that there is no violation of timing. The source of synchronization that will be used is (as you have already suspected it) on-board 40 MHz clock.

  As to why you don't get a mention of the MiteClk and the ReliableClk in summary, I think that it is due the 7833 and the 7842 relying on FPGA Virtex-II and Virtex-5, while the 7820 uses the Kintex-7 family. Depending on what type FPGA using different estimates regarding the use of the device and synchronization are not always available.

  As I said, as long as you don't get not an error of timing and your compilation is completed successfully, you should be fine.

  Kind regards

  Alex

• Cannot send DIO siganl using the LabVIEW FPGA Module and MyRIO

  Everything works when no FPGA is used. If the circuit and harware work.

  However when targeting module FPGA MyRIO, acquiring data and processing the work and the signal to the engine's 'sent' (visible when executing Hightlight is on).  But there is no tension on the DIO ports used. FPGA projects includes VHDL code.

  Do you know what could cause this problem?

  You must control the OID in the FPGA.

• LabVIEW FPGA: Not possible to create an executable file that uses the FPGA in Simulation Mode? I get a weird error code

  When I try to create an executable from a host VI that has an "Open FPGA VI" reference who has run, the value "Dev computer w / Sim i/o" value, the application is built without error but when I try to run it, it opens with an arrow broken to run and has the following error:

  "VI has an error of type 2302200.  The full development of LabVIEW version is necessary to correct mistakes. "In fact, he repeats this message two times in the same window for some reason any.

  Moreover, I * have the LabVIEW full development version and I use 2010 SP1

  While the error message is not as clear as it could be, you're right: you cannot run an executable file that tries to run an FPGA VI in the simulation.  It would be nice if there was an error in compiling.  I always forget to switch to run on the target FPGA before building my application and discover the error until I have it copied on the system in the laboratory.

• Zip file and iso LabVIEW FPGA Xilinx tools 12.4 Module is broken

  I downloaded the two zip file of LabVIEW FPGA Module Xilinx tools 12.4 and iso image file three times to make sure that both files are broken and can not be installed!

  

  The size of the file is so large about 3g. It would be better to double-check before you download on the Web site.

  -Very well,.

  The download is complete and the standard Windows Extraction tool worked, WinRAR worked and 7Zip worked (and no, I don't know why, I installed all). I did download a wireless network that does not have direct access to our internal servers, it should therefore be a test valid. If the link I provided above was not that you used (probably isn't, because it is not an ISO option), could you please provide me with a link to the page that you used so that I can test and repair? In the meantime, the link above should work for you.

• Choose ISE or Vivado Xilinx tools for a specific compilation of FPGA

  Hello

  Is there a way to specify what version of Xilinx Compilation tools to use when compiling an FPGA VI? I want to try the version Vivado tools rather than the version of ISE to see if there is an improvement. I have listed some information on my setup below.

  It's my current setup:
  NI5772 / PXIe7966 digitizer and FPGA
  SMU-1082 chassis
  SMU-PCIe8388 / SMU-PCIe8389 controller
  LabVIEW 2014

  In the past, I used the LabVIEW 2014 FPGA Xilinx tools 14.7 Module to compile my code. But I also want to try the version of Vivado, "LabVIEW FPGA Module Xilinx tools Vivado 2013.4 2014', to see if it gives better results."

  Page-based "compatibility between tools Compilation of Xilinx and FPGA hardware OR" here:
  http://www.NI.com/product-documentation/53056/en/
  Looks like the PXIe7966 FPGA must be compatible with the tools of Vivado 2013.4.

  I tried to uninstall the version 14.7 ISE tools, and install the 2013.4 of tools Vivado (so Vivado 2013.4 tools are the only xilinx tools installed on the computer). But LabVIEW complains that the ISE 14.7 tools are not installed and does not compile the FPGA VI.

  Thank you!
  Michael

  This FPGA is a Virtex-5 FPGA, so you're stuck with ISE.  You need a card FPGA that either uses the architecting chip (I think it was only in cRIOs) or 7 Kintex to use the compiler to Vivado.

• LabVIEW FPGA, 2015 compilation error

  I've recently switched to LabVIEW 2015 and I'm working on OR myRIO. So also installed myRIO 2015 bundled software. The problem I have is that the compilation of fpga fails within 10 seconds.

  

  and the target Xilinx journal report is empty

  

  The first time when I tried to compile on 2015 version, it failed and the message box that failed came alongwith the avast antivirus warning for malicious activity. I reported it as wrong and now I tried several times with avast shield disabled control, but the results are the same. While the version of labVIEW 2014 works very well.

  Now, I'm sure that there is something wrong with the installation of Vivado because this dll is part of it. The dll must be default in the2014_4\lib\win32.o directory C:\NIFPGA\programs\Vivado if you are using an operating system for 32-bit AND also in C:\NIFPGA\programs\Vivado2014_4\lib\win64.o If you use a 64-bit operating system. If the dll is not here, it is probably that the anti virus (I've never seen what happens to Xilinx but I have for other stuff).

  I'm emphasizing the 2014_4 because LabVIEW 2015 uses Vivado 2014_4 while 2014 LabVIEW uses Vivado 2013_4. Since you have also installed LabVIEW 2014, you must have 2013_4 as well and if it works, you will find the dll I just wanted you make sure you check the correct directory for the Vivado 2014_4.

  Download and install (reinstall or repair if already installed) 2015 LabVIEW FPGA Module Xilinx tools Vivado 2014.4. You can also use the DVD Setup if you have. It would be a good idea to do the installation with the disabled and even anti-virus try the first compilation the same. Try and let me know if the problem persists.

  Kind regards

• Drivers Xilinx/Multisim and Labview FPGA

  Where can I find drivers for my FPGA OR if I use Multisim/Xilinx and NOT of Labview?  All the links I found are Labview be installed.  However, the explicit manual FPGA indicates that you can use Multisim/XIlinx ISE in place.

  OK, I tested just outside. The Driver of LabVIEW 2013 DEFB contains 2 separate components, the driver and Module FPGA support. If you run this installer, it won't check if you have LabVIEW FPGA installed unless you check the box for LabVIEW FPGA support.

  I can change the text in the Installation Instructions to read "LabVIEW FPGA 2013 is required to install the LabVIEW FPGA Module Support component installation".