Is it possible to run two iMovie 11 and 10 on the same iMac?

Similar Questions

• Is it possible to rotate the two iMovie 9 and 10 of the same MacBook Pro?

  Hi all

  Please be gentle with me; I have only just joined the community.

  I have an Apple MacBook Pro 2015 running OS X El Capitan; I used iMovie 10.1.1 and have already fallen on its limits.

  I would like to export to Quicktime so I can have more control over the settings (fps / sound, etc.) of my videos created with 10.1.1 before posting on You Tube, but can do with 10.1.1. I would like to download 9.0.9 and have both versions on my Mac (I understand that you can have both on the same machine) and you can / export to QuickTime with 9.0.9 share.

  I tried to download from the official website of Apple but encounter the following:

  "This update has no need to be installed. A new version of iMovie is already installed"

  It is no possible to navigate around this alert.

  Is it possible to have the two 9 and 10 on the same Mac, iMovie as 9 has never been installed on it, and if yes, how does one?

  Thanks in advance!

  J0hnst0n00

  What you propose, it's really not the way to accomplish what you want to do. iMovie 9.0.9 is not available on the App Store and can be purchased as part of the package iLife online from a third party like Amazon. Also, it is not completely compatible with El Capitan. Certainly not the right approach. I suggest you get MPEG Streamclip against 5 squared, which is downloadable for free. Share your iMovie project to file that will give you a MP4 file. Open in Streamclip and you can save as a Quicktime movie. It has a complete set of options, including the choice of codec, rate, etc. to image size.

• Running two engines step by step at the same time of a port

  Hello

  I have to run two motors at the same time - was used to move a linear ball screw and the other to get a grip. I do voltage and test on small twist wires, but the tension and torsion must be made at the same time. I must also build capacity for each engine to take several steps, IE. have an engine steps number at speed x and then move x number of speed z steps. The two engines must be able to do. However, I have problems to make the engines to run at the same time and to take all measures. The engines are connected to two RMS Technologies R356 controllers. The two controllers are then connected to a RS485 to USB converter card and this card is connected to one of the USB ports on the computer. Currently, I spend an array of orders to two loops each VISA containing read and written. I have attached the vi to watch. All the stuff in the code synchronization is because a new order cannot be sent to the controller until the engine is running the previous command. If orders are sent right after the other, the controller will not execute the first command and then return with an error.

  Does anyone have a suggestion as to what I'm doing wrong?

  Thanks in advance for any help.

  
  

• Cannot run another program Adobe and Pshop at the same time

  Hi all

  I am facing a problem of frustration. I can't run two adobe programs the same time - that is to say, Lightroom and photoshop, After effects and photoshop.

  Lightrrom and After effects sem to play together OK at the moment looks like so it may be a problem of PShop.

  Running the final version of windows 7 64 bit, PS3, trial, trial PS4 AE licensee... 8 GB of Ram, has been with graphics cards, Nvidia and ATI both, open GL, on Open GL off, separate "scratch disks", reinstalled.

  Any help, advice, tips would be really appreciated as having to close programs all the time when switching applications is a real pain in the neck

  see you soon

  Jeff

  I'm REALLY happy that I have not built a new 64-bit computer. I have Win7 Pro 64 bit, but I'll wait until SP1 is issued so that the drivers have time to catch the new OS

• Can we run a LabVIEW VI and downloaded at the same time on Arduino code map Arduino?

  If we use LabVIEW to write data in series to an Arduino, can send us on the Arduino code before you run the VI so that the Arduino has something to do with the signals it receives from LabVIEW? Specifically, we want to use the digital IO pins to read into a signal on the Arduino (provided in series by LabVIEW) and do something with the signals as a LED lights up. Is that what most people do?

  Our project includes a parking meter and we want to use the Arduino by itself, but first we want to simulate the code using some signals that we want to move through LabVIEW. Basically, the meter said the Arduino, if they are paid, and if there is five minutes or less remaining on time. Based on this information and data from a PING sensor, we will determine which exit to turn off (a flashing LED to different frequencies to designate two different messages).

  Sorry if my question is not clear or if it is trivial; my partners and I are very new to LabVIEW and the Arduino, and we try to get this working soon.

  The LabView VI Arduino library is designed to work with the Arduino as a USB DAQ/DIO.

  This isn't really what you're after...

  I don't really know how LabView would be useful in this project.

• New laptop Win7; When I try to start Firefox, I get the mess, "Firefox already running" error, I uninstalled and reinstalled with the same results.

  This started after I did some of my old computer Quickbook files windows easy transfer to my laptop. I uninstalled firefox and download the latest version on the site and still get this message. I don't see where it can be run. Thnx, Bill.

  This sounds like it is not the installation of Firefox itself that is messed up, but your profile folder (where are stored the your personal settings such as bookmarks, passwords, etc.). You say you used easy transfer, and that could hurt somehow.

  To start from scratch once again, follow the instructions under "create a new profile" here: https://support.mozilla.com/en-US/kb/Managing-profiles. I hope this helps!

• Running the Single Instance and RAC on the same server of different homes.

  Hi guys,.

  I already have 4 node RAC12c installed on OLE 6.

  I'm planing on some of my other 12 single instance databases on other migration for RAC nodes.

  Please correct me here if I am wrong...

  My understanding is that, to be able to use DBCA or rconfig for conversion of database instance RAC, the only instance and RAC cluster must run on the same server or machine node.

  Thanks to this understanding... Am planing on the installation of a binary single instance on one of my cluster node node1 say and then use RMAN to duplicate the single instance or just an RMAN restore from the node of the instance that is unique to this node1. Am capable of this plan must then use DBCA or rconfig to convert the CARS database.

  Now, my question is can I run a single instance and RAC on the same server for different homes with different database ports?

  2. for these unique instance that runs on the server RAC 1 node, can I use the RAC database listener that runs from the House of the grid or I have to create another auditor?

  Thank you in advance and also let me know if I can use DBCA or rconfig when the only instance and rac database are on separate nodes.

  K

  Fix. And that's what I would normally do. In general, I would have just an ORACLE_HOME directory that can be used by the punctual and RAC databases at the same time.

  See you soon,.
  Brian

• HP EliteBook 8570w: is it possible to run two monitors on a 8570w without a docking station.

  Is it possible to run two monitors on a 8570w without a docking station. Connect a monitor to the VGA port and the other to display port.

  I was able to get this to work. My 8570w has an Amd over-pants 7700, don't know if that matters. One is connected VGA other Displayport. The port monitor must have a custom resolution defined in the over-pants Control Panel. except that it works perfectly. More laptop screen no. Docking Station 2 24 inch Dell.

  And thanks for the quick reply Provost.

• Is it possible to use iCloud shares photos with the two opening and Photos at the same time?

  Is it possible to use iCloud shares photos with the two opening and Photos at the same time?

  Non - PEAK is not a feature of iPhoto or Aperture - this is new with Photos

  LN

• Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Hello

  2796614 wrote:

  Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Of course, it is possible.  According to what the text file looks like to, you can create an external table that treats the text file as if it were a table.  Otherwise, you can always read the file in PL/SQL, using the utl_file package and INSERT of PL/SQL commands.

  You have problems whatever you wantt?  If so, your zip code and explain what the problem is.

  Whenever you have any questions, please post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the exact results you want from these data, so that people who want to help you can recreate the problem and test their ideas.  In this case, also post a small sample of the text involved file.

  If you ask about a DML operation, such as INSERT, then INSERT statements, you post should show what looks like the tables before the DML, and the results will be the content of the table changed after the DML.

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: Re: 2. How can I ask a question on the forums?

• is it possible to use two external LDAP and authentication of external Table?

  Hi, is it possible to use both external LDAP and authentication of the external table?
  
  they all need two initialization blocks to access a session system variable, USER?
  
  Thank you

  Hello
  I don't think it's possible to impliment the LDAP authentication both extenal together. The reasons are,
  1. we cannot define two sources (LDAP and Extenal DB) in the same blocks of justine initialization user information.
  2. If two different (one for LDAP) initialization blocks and one for extenal DB are used, we cannot use variable USER twice it's a defined system variable.

  Thank you
  Swami

• Why these two loops while cannot work at the same time?

  I place two same while loop in the block diagram, and then use highligt and one-step run function to observe their parallel operation.

  But I discovered that this two loop operate alternately and cannot operate simultaneously.

  Can someone help me understand this?

  My software environment:

  OS: Windows XP SP3

  LabVIEW: student editions 2011

  CPU: intel P8400

  Hi, GerdW

  Thanks for the reply

  I post a video to illustrate my question.

  While I press a strong of the run, I find that these two loops does not begin at the same time.

  While the execution of a loop, the border on the other became dark.

  It seems that during an iteration in loop 1 run, the loop2 keep waiting. and then the loop2 iterate while loop1 keep waiting.

  I do not know why this happens

  Sincerely

• Windows XP loses two monitor settings and returns to the single monitor after to be identified only by the windows... No reboot is

  To begin with, I am the HelpDesk of the company and our users are running Windows 7, Vista and XP. The problem will occur randomly on most XP and Vista systems.

  I'm beginning to believe that it is a computer problem to the extent of the material or something of this nature.

  For now, I swapped the computer and now the question is not fooled by the user.

  But in general I wanted to know why this happens. They will be blocked (not a stop) their computer to take a lunch break and when they return to log in order to return to work. They work on two monitors and for some reason, as the settings go back to the single screen...

  Why this keep happening? Help, please?

  Either way, I don't think it's a driver problem... Because I just run images on hard drives of all application users run and the problem occurs randomly.

  Thanks in advance for your response...

  Adolfo

  Hello

  The Microsoft Answers community focuses on the context of use. Please join the professional community of COMPUTING in the TechNet forum below

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• Ran Malwarebytes & two threats were each one with the same name: PUM. Disabled.SecurityCenter. fact that associated with MSSE PUM & the boxes unchecked in MS security Center.

  Original title: PUM. Disabled.SecurityCenter

  I recently removed "patch system" of my Dell computer XP. Malwarebyte s was the only software to do. MSSE caught, but couldn't fix it. I then updated & ran MSSE on my Toshiba - no threats not found. I then ran Malwarebytes & two threats were each one with the same name: PUM. Disabled.SecurityCenter both at the Date of the registry in HKLM\SOFTE\Microsfot\SecurityCenter\AntiVirusDisableNotify & HKLM\SOFTWARE\Microsfot\securityCenterFirewallDisableNotify.  These two have been listed bad: Good (0) (1).  In the Malwarebytes wesite, I read that this has something to do with MSSE. In a commentary, he says it occurs if, in the MS Security Center, the notification "Notify me if my computer might be at risk because of my virus protection software settings" is unchecked.  I then went ahead & check all 3, firewalls, viruses & automatic updates. My computer seems to work well, except that the fan runs all the time (there are a lot of processes running & the CPU usage is very--often 100%, but the computer works fast).

  My questions are: 1) the PUM associated MSSE & the boxes unchecked in MS security Center; (2) should I click on "ignore" in the Malwarebytes scan? 3) was right to check all the boxes in the center of security - "altert me if my computer may be at rist b/c of my xxx software settings?  Thanks in advance for your help.

  PC fan2

  Hello

  (1) is associated with MSSE PUM & the boxes unchecked in MS security Center;

  The following thread might answer this question: http://forums.malwarebytes.org/index.php?showtopic=69859

  (2) should I click on "ignore" in the Malwarebytes scan?

  Yes

  3) was right to check all the boxes in the center of security - "altert me if my computer may be at rist b/c of my xxx software settings?

  Only, run antivirus software at the same time. Firewall must be performed, evil-ware bytes can be run at your pleasure.

• Is it possible to take 2 web apps with both having the same element name (IE: titreArticle, short) and display them in a list in chronological order.  For example something like that {module_webapps id = filter "3673 & 7432" = "classified" itemId = mo

  Hello

  Is it possible to take 2 web apps with both having the same element name (IE: titreArticle, short) and display them in a list in chronological order.

  For example something like that {module_webapps id = "3673& 7432" filter = 'class' itemId = "71755" template="/new/partnernewstemp.tpl" sortType = 'date'}

  Thank you

  Angela Borden

  This is not possible, I'm afraid, you must list each of the webapps separately and then combine and re - sort the two lists.