Is it possible to show/hide a layer in all the files in a book?

Similar Questions

• Is it possible to get a user account and all the files associated with it if it has been deleted?

  My fiance's brother thought he was doing us a favor of the deletion of a user account that we use too often.  I always use it because it has pictures on what we use a main user account is not.  I am panicing because I fear that these photos were lost.  Is there a way I can restore it?

  External USB hard disks costing less than USD 90 for 1.5 TB or more - I do not understand how people lose data these days.

  You * might * be able to recover all or part of the files by using an application like Recuva (it's a link, it's free, do not buy anything).

  Because you posted in Windows XP - Start searching files in C:\Documents and Settings\ - in particular directory from the old username (which was probably completely deleted.

  The machine is used, less you will recover anything.

  Whatever the results - I suggest buy you a form any external backup and schedule a periodic and consistent backup that you can go in situations like this.

• Is it possible to run a search/change on all the steps within a sequence?

  Is it possible to apply a find/change to all the steps within a sequence.  For example, if you want all instances of '27_' to "59_", is it possible in TestStand 4.2.1?

  Have you tried hitting "Ctrl" + "F" on your keyboard?  This is what I use all the time and you can find/replace with it.

• The temporary internet files folder does not show all the files in this folder property while is more than 1 GB. How to delete temporary internet files. ?

  The temporary internet files folder does not show all the files in this folder property while is more than 1 GB. How to delete temporary internet files. ?  Disk space is very low around 1 & half GB. Please someone help resolve this issue. I am looking for the solution, but it did not have a specific.

  Thank you best regards &.

  Atul Zade.

  CCleaner is very useful to get rid of temporary files, you can get it here: http://www.piriform.com/ccleaner you can use it to clean your temporary files, but DO NOT use registry cleaning works, registry cleaning is mainly a useless effort that can cause more harm than good.

  John

• "I can't copy all the files to my kingston sd card, when I try to copy his shows that" remove right protection "so plsss help me get rid of this.

  "I can't copy all the files to my kingston sd card, when I try to copy his shows that" remove right protection "so plsss help me get rid of this.

  Hi ebugsasi,
   
  To remove protect him writing on a kingston Micro SD cards, locate a switch or button on the side of the micro SD adapter card. It will normally be a symbol of locking/unlocking on it. Put it to the unlocked position.
   
  This should remove the write-protection feature.
   
  Keep me updated on the status of the issue.

• Properties tab shows 3609 files, when you select all the files it only shows the files in 1974?

  When I right click and select Properties tab it shows 3609 files, when selecting all the files to copy shows only the files of 1974?

  Hello Tony,.

  If it is certainly a big difference, I think that for most all of this is taken up by folders and subfolders which are mainly empty place holders. Have you looked at the folder with Windows Explorer? A freeware application that can help is WizTree, it provides both a performance graphics and text of what's on your hard drive (or part of it). Can be very educational. Download here: http://antibody-software.com/web/software/software/wiztree-finds-the-files-and-folders-using-the-most-disk-space-on-your-hard-drive/ .

  Let me know if this helps you.

  Kind regards

  BearPup

• Is it possible to export all the files in a pile when it's minimized?

  Is it possible to export all the files in a pile when it's minimized?

  Only the top photo is selected. Press the S key to develop the battery and then use the shift key to select all of the battery. After export press S to re - stack or use the Photo menu.

• Show hide columns generates error on the page if not found data

  Hello
  
  Has anyone ever encountered a situation where a page error when using the feature show hide column and no data is returned.
  
  My region to report is based on SQL and when calling at the start page or when restrictions are no match all all the data that appears is the message "No data found" by default. The method used, I pulled Carl Backstrom (RIP) application.
  
  < script type = "text/javascript" >
  function html_HideBasedOnCheckBox (pThis, pThat) {}
  if(pThis.Checked == true) {}
  html_ShowCellColumn (pThat);
  } else {}
  html_HideCellColumn (pThat);
  }
  }
  
  function getCellIndex (pRow, pCell) {}
  If (document.all) {}
  for (var i = 0; i < pRow.cells.length; i ++) {}
  If (pRow.cells [i] == pCell) {l_Count = i}
  }
  } else {}
  l_Count = pCell.cellIndex;
  }
  Return l_Count;
  }
  
  function html_HideCellColumn (pId) {}
  var l_Cell = $x (pId);
  var l_Table = html_CascadeUpTill (l_Cell, 'TABLE');
  var l_Rows = l_Table.rows;
  l_CellI = getCellIndex (l_Cell.parentNode, l_Cell);
  
  for (var i = 0; i < l_Rows.length - 1; i ++) {}
  html_HideElement (l_Rows.cells [l_CellI]);
  }
  return;
  }
  
  function html_ShowCellColumn (pId) {}
  var l_Cell = $x (pId);
  var l_Table = html_CascadeUpTill (l_Cell, 'TABLE');
  var l_Rows = l_Table.rows;
  l_CellI = getCellIndex (l_Cell.parentNode, l_Cell);
  
  for (var i = 0; i < l_Rows.length - 1; i ++) {}
  html_ShowElement (l_Rows [i]. Cells [l_CellI]);
  }
  return;
  }
  
  < /script >
  
  The attributes of HTML form elements is: onclick = "html_HideBasedOnCheckBox (this, this.value)" "
  
  The LoV for this box is static for a column.
  
  This set works very well if the data is returned. It must have something to do with the topics defined in the SQL code and therefore are not displayed when no data is returned. The code is then try to hide or something that does not exist.
  
  The part where he falls is during the setting of the variables:
  
  function html_HideCellColumn (pId) {}
  var l_Cell = $x (pId);
  var l_Table = html_CascadeUpTill (l_Cell, 'TABLE');
  var l_Rows = l_Table.rows;
  l_CellI = getCellIndex (l_Cell.parentNode, l_Cell);
  
  ... and more specifically the last variable setting: l_CellI = getCellIndex (l_Cell.parentNode, l_Cell);
  
  Does anyone know how I can get around this by using the method of SQL report i.e. Select col1 col2 "Column 1", "column 2" From myTable etc. or if it is possible to make up for it at the beginning that is
  
  If NO_DATA
  then
  dont_hide/display_any_columns that_dont_exist
  on the other
  var l_Cell = $x (pId);
  var l_Table = html_CascadeUpTill (l_Cell, 'TABLE');
  var l_Rows = l_Table.rows;
  l_CellI = getCellIndex (l_Cell.parentNode, l_Cell);
  
  for (var i = 0; i < l_Rows.length - 1; i ++) {}
  html_ShowElement (l_Rows [i]. Cells [l_CellI]);
  }
  return; ........
  
  ???
  
  See you soon,.
  
  Mike

  Hi Mike,.

  In fact, you can check the existence of the cell:

  var l_Cell = $x(pId);
  if (l_Cell)
  {
   rest of the code to hide the column
  }
  

  As long as l_Cell makes reference to a valid page element, then the if test passes and the rest of your code can work.

  Andy

• The use of password for show/hide forms - anyway to keep the setting "does not print?

  I have a George_Johnson script that allows me to enter a password to show/hide the fields selected (keys actually).  It works perfectly, but when I enter the password and buttons appear again, setting general/Common Properties amounts to 'visible' instead of ' visible but does not print ', and the buttons appear when I print the document.  I thought I could change these lines and print buttons...

  case 'password': / / your password goes here

  getField("x").readonly = readonly;

  getField("x").display = readonly? Display.Hidden: display.visible

  App.Alert ("level 1 support is now" + readonly_desc + "d", 3);

  break;

  .. .to change the 3rd line to read as follows: getField("x").display = readonly? display.hidden: display.visible but does not print  (or _but_doesn't_print;)

  but then I started to make syntax errors in the 4th line.  I don't know about Java, but I thought I might get lucky.  I get hot?  What is the "3" that needs to change?  Or is that I started quite wrong?

  Thanks for reading,

  Zac

  You can't guess correctly that the value can be and expect it to work... You should consult the documentation.

  In this case, what you're looking for is "display.noPrint".

• Captivate 9, sensitive slides on a Mac and a PC publish the slides, timed objects (show/hid) do not shown in the final html5.

  I have some 9 Captivate, sensitive slides on a Mac and a PC.

  When I published the slides, timed objects (show/hide) not shown in the final html5.

  Some slides contain objects such as some graphics (png), the arrows and text boxes that have a period of delay or show that for a given time.

  They work within Captivate when I executed the chronology, but do not yet show in the published code. I tried several different browsers.

  Any idea why these objects do not appear?

  Thank you, I have yet seen that I didn't just look.  Once, he toured. Jim

• How to show/hide a single component of the form on valuechangeListner

  Hello
  
  I want to show/hide on move down according to the value of the selction of value in the other fall down. However, when I change the value lower down, the GET refreshed and the entire domain in the list drop-down and entered text is empty. Can you please help me with this?
  
  I want to show/hide the drop down to "Business Unit" based on the value selected for "Type of application" and the data for the remaining element must be populated.
  
  Here is the code

  <af:panelFormLayout id="pfl2">
  
                      <af:selectOneChoice label="Order Type" id="soc2" required="true"
                                          validator="#{lovManagedBean.orderTypeValidator}"
                                          binding="#{userAuthentication.orderType}">                    
                        <f:selectItems id="si2" value="#{lovManagedBean.orderTypeItems}"/>
                      </af:selectOneChoice>
                      <af:selectOneChoice label="Request Type" id="soc1" required="true"
                                          validator="#{lovManagedBean.requestTypeValidator}"
                                          binding="#{userAuthentication.requestType}"
                                          
                                          valueChangeListener="#{userAuthentication.requestTypeValueListener}"
                                          autoSubmit="true">
                        <f:selectItems id="si1" value="#{lovManagedBean.requestTypeItems}" />
                      </af:selectOneChoice>
                      <af:selectOneChoice label="Request Geo" id="soc3" required="true"
                                          validator="#{lovManagedBean.requestGeoValidator}"
                                          partialTriggers="soc1"
                                          binding="#{userAuthentication.requestGeo}">                    
                        <f:selectItems id="si3" value="#{lovManagedBean.requestGeoItems}" />
                      </af:selectOneChoice>
                      <af:selectOneChoice label="Business Unit" id="soc4" required="false"
                                          validator="#{lovManagedBean.businessUnitFlagValidator}"
                                          binding="#{userAuthentication.businessUnitFlag}"
                                          visible="#{userAuthentication.requestType ne 'Credit Memo'}" partialTriggers=":soc1">                    
                        <f:selectItems id="si4" value="#{lovManagedBean.businessUnitFlagItems}" />
                      </af:selectOneChoice>
                    </af:panelFormLayout>   

  Hello

  cut,,,Tags and it should work
  but I recommend that you rewrite your page as regular xml (.jspx) to avoid the 'strange' behaviours ;)

  example:

  Kind regards
  Brano

  Published by: Branislav Nemec on June 2, 2011 20:33

• Folder of My Documents of security properties show 'Total control', but the properties of all the files and the files that it contains are 'read only '.

  "Properties > tab security for My Documents and my pictures show that home users of the system, my own account and administrators (I'm also administrator) have full control ' (with all the boxes"Allow".  But the properties of each individual in My Documents and my pictures folder and all files in those, show 'Read only', and all the ticks in the Security tab are grayed out for all users or groups names.

  I cannot understand the explanation in the section using the Access command ('Object Types', 'Object name' etc) when I try to change this tab for a file or folder. Help, please!

  Hi Angela,.

  Welcome to the Microsoft community forum. Let me help you with your concern.

  The security settings for the my document and other folders in the library will have complete control and the tick mark you are talking about will be by default on all Windows 7 computers. Some folders inside of it will be in read-only by default. You can remove by box to uncheck Read-only in the properties of the folder.

  To find out how to find, organize, and use files and folders on your computer, see using files and folders

  For answers to frequently asked questions on the application of the permissions to a file or folder, see what to know before applying permissions to a file or a folder

  You can also check these links:

  File and folder permissions

  http://TechNet.Microsoft.com/en-us/library/cc732880.aspx

  Access control

  http://TechNet.Microsoft.com/en-us/library/cc770749.aspx

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• How to have a layer that includes all the files as on stage?

  I do not write in classes and I thought, to organize well, code (I write everything on the timeline, moviclips and so...) I don't have classes and other things in my programs), wouldn't be a good idea to have just a layer on the timeline, which says:

  include the this.as

  includes that.as...

  And the files are written as it would be written on the main timeline.

  Rather than having a lot of class files, which requires (for me) more knowledge, isn't it a good idea to include the .as or .txt files either and have things organized like this?

  As it slows down the process running?

  When you run a file, the operation is independent from where you put the code.  If it is internal or external beforehand, it's all rolled into one file (swf or executable) after compilation.

  Although it may depend on the size of the project, working with class files is considered the most effective approach.  In any case, anything that meets your needs and capabilities should be enough.  It isn't really a question where you put the code, but the quality of the code that you put.

• Is it possible to show/hide something on the car (registration - buy) page that is based on the name or the productId?

  I need to show some of my form of payment based on the name or the productId. I have 2 types of products, family and individual. If they have product in the family is selected they need to add dependent information.

  I was able to do this based on the total. Amount but it is a product that has the same price as a product of the family, so it won't really work for me.

  {% If globals.cart.totalAmount is '165.40' or globals.cart.totalAmount is '22.95' or globals.cart.totalAmount is "249.40" or globals.cart.totalAmount == "29.95" %}

  I have the following available on the payment page:

  'basket': {}

  'itemCount': 1.

  'Amount': 165.40.

  "countryCode": "US", he said.

  "currencyFormat": "$."

  "items":]

  {

  "id": 7155959,

  "productId": 9712238.

  'catalogId': 191952,

  "name': 'Combo Plan - annual family Plan."

  'code': '73VNVW7RI9 ',.

  "description": ","

  'Price': 155.400000,

  'quantity': 1.

  "totalPrice": 155.400000.

  "smallImage": "/ _assets/img/products/dbm-family-annual.png"

  "url": "/ store/dental-benefits-max-family-plan-annual-1".

  }

  I don't know how things to access points. I tried globals.cart.items, globals.cart.items.code etc.

  Store is located here.

  http://uGuru-dentist2015-us-nov62015-826.BusinessCatalyst.com/store

  Hi James,

  You're right, the points are located inside the globals.cart.items

  {{ globals.cart.items | json }}

  {% assign NomTableau = globals.cart.items | map: 'name': json-%}

  {% assign idArray = globals.cart.items | map: 'id' | json-%}

  {% If NomTableau contains 'Unique string name'-%}

  Found the name
  

  {endif %}

  {% If idArray contains '9712238'-%}

  Found the id
  

  {endif %}

  Map filter is very useful in these situations, it generates a string of property of an object.

  Hope this helps,

  Stoiky

• Show/hide a Div so that the application process will be executed

  Hi all
  
  I have the following problem:
  I'm on APEX 3 and I have the page with 2 elements. When the user, enter the value in the first element on the page and navigate out of the element, in the second article should be the SYSDATE.
  This must be done as:
  1. set the fovus in the Item1.
  2. navigate off the Item1 (with TAB or the mouse).
  3 JavaScript function will be executed:
  3.1 icon "Please wait...". "will be displayed.
  3.2 application of getDbDate process will be executed.
  3.3 the value returned by the getDbDate of application process is allowed in the Field2.
  3.4 icon "Please wait...". "disappears.
  
  Here ist the sample application: http://apex.oracle.com/pls/otn/f?p=MISCELLANEOUS:108
  
  In Firefox, I have no problems to show the "Please wait...". "Icon, but the Explorer Intener shows me nothing. But the application process will be executed.
  
  Any ideas?
  
  Best regards

  Hello

  See the example of CARL
  http://HTMLDB.Oracle.com/pls/OTN/f?p=11933:62

  Kind regards
  Jari
  -----
  My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai