Is it possible to trigger an alarm manually?

Similar Questions

• Is it possible to trigger a function Javascript C++ QML?

  Is it possible to trigger a function Javascript C++ QML?

  Just look at the section of signals and slots that documentation for examples of how to define and send signals of C++. Then in your QML, where you have exposed your C++ object as a property of context (named, for example, "foo"), you would foo.signalName.connect (myJsFunction) in a certain place like maybe onCreationCompleted. Connects the signal to the function, and when it is executed will be called the JS function.

  In short, the real connection between the two is trivial, as long as you already have all the side "C++ object and signal and exhibitors being C++" processed things.

• trigger the meter manually

  Dear community,

  I'm fighting a problem with the start of a task is triggered counter.

  environment:
  -Card: USB-6218 offer using the NOR-DAQmx driver last 9.7
  -OS: Windows 7 x 64
  -platform dev: MS Visual Studio 2010 (C/C++ language)... but don't mind if someone comes up with a solution of Labview

  configuration of the card:
  - redeclenchables counter 0, which begins to generate an amount over of clocks (100 to 1000) to pre-defined, high frequency (200... 250 kHz) when it receives an front amount on PFI0
  -Counter 0 generates the sample clock for two analog output channels (AO0 AO1, number of samples is finished because finity of generated clocks)
  -Counter 0 is also output to standard digital pins (PFI 4 / P1.0) and then smoothed (creates high constant on "clock" constant low orr on "no clock")

  process:
  -NI DAQ card starts the output on AO, 0 and 1 for a predefined period
  -While the clocks are generated, my most smooth guard PFI 4 high
  -When the build is finished, the output of the smoothed counter 0 generates a falling edge (from 'impulse last clock' to 'no more clocks'), which triggers a device X
  -After device X is completed, it generates a rising edge on the entrance of counter 0, which starts clock and so begins the power on A0 0 and 1 new
  - and on and so forth...

  problem:
  -Could not find a way to start the whole loop between NI DAQ card and device X, because I can not activate the counter 0 trigger manually
  -I can't control device X to send me a trigger, because it is technically black box... or call "dumb piece of Electronics" ;-)

  what I tried:
  -creation of a digital output task, what output axis reconnects on pin source Counter 0; does not work, because digital ports can be shared over the borders of the stain on the M Series devices. also I can't reach a single PIN to a task (software exception)

  Any ideas?

  Thank you for reading,

  Mr. Paul

  Hello Charles,

  Unfortunately I have no screenshots of VI, because it is coded in C.

  But I solved the problem:

  It is possible to have a task of external digital output, which is launched while the task retrigger, and the analog output task is already running. This task is defined by program to create a short pulse. Digital output reconnects to the digital input used for triggering.

  My mistake, it's that my card has only one output port digital, but a different task claimed the 8 pins of this port. The other task is only now claiming a single port pin, so the other pins are free to use for additional tasks.

  Thank you for reading,

  Paul

• Simple trigger and alarm Question

  Thanks in advance for your help.

  My situation:

  I have the measurement computing USB DAQ with Labview 8.6 1208FS (ULx using). Am I voltage to a load cell measurement and the need to put in place a range of alarm

  • Load cell by smallload and ramps then begins up to about 15 lbs
  • I would like a continuous display of the data on the chart
  • I need to know if the load went down 15.1 14.9 or overwhelmed below (via two separate front led remains lit if the charge was never out of reach)

  My understanding is that I need some kind of trigger to make the alarm go off like the ramps of load cell up to past 14.9 lbs.

  Phil,

  Given that in a single iteration is reading your data acquisition (read data) an array of values or a waveform, all arithmatic operation will be done on all these values and thus the output of a table or values. In your case you are looking for the trigger condition so I've been chnge the data in table 1 d (easier to treat) and look at the max value and then compare with the threshold so the value out would be an element and not the table of elements.

  flipphil wrote:

  Thank you odessy27,

  I want to be constantly looking at my input voltage and switch to a mode 'on', he spent the trigger threshold.

  • Always begin near 0v and ramp up about 7v comments
  • Once it exceeds a certain trigger level, say 6.95v, I want mainly to 'start' of the program
  • At this point, the VI needed permanently watch entry and turns on an LED if the voltage is less than 6.9v or superior 7.1v.

  The conditions you mentioned can be achieved with the help of another structure within the existing case. Try it and let me know if you find it difficult to implement.

  Nilesh-

• Palm alarms of the GER. It will trigger the alarm even if the ringer volume is silent?

  I just upgraded to Palm Pre.

  I work in an office environment in which we have our rings off, which usually means the week of work my ringer is off and I just have on vibrate so I can feel it in my pocket when a call or text comes in.

  With previous phones if you set the alarm, the alarm would still off and make it sound, even if the ringer is turned downwards.

  PRE alarm will always be sound or I'm going to increase the volume of the ringtone to the top every night before I go to bed?  My charger is my bed so hung up that the charger is not a problem.

  Yes always audible alarm if the mute button is on mute, unless the settings in the preferences of the "clock" is not to do so. Open the app clock, the menu drop-down, select Preferences, there is a new option added in one of the latest improvements. 'Ringer turn off' > 'Play the alarm even when' > 'YES '.

• How to trigger an alarm in the DSC module if, after alarming reactivation

  My application monitors a large number of tags.  I set up the user interface to allow the user to temporarily disable the alarm for some time.  For example, if someone opens the door to a freezer, then it closes, the label of the temperature goes into alarm.  Since we know why the alarm has occurred, the operator can deactivate the alarm for a couple of hours.  When the alarm is reactivated for this tag, if it is still in the range of alarm, he should be back in alarm.  The problem is that it is not.  Is there a way to programmatically alarm status?  I use also the alarms & events display component ActiveX to acknowledge alarms, so I prefer not to use the user defined alarms.  Any ideas would be greatly useful.

  Tom

  
  

• Is it possible to trigger a forced memory stack trace?

  There, I think of the stack trace that is done automatically on all running applications when "something goes wrong.

  I have an application that freezes up (I suspect it is a blocking of the thread) and it would be great to have a practical method to force the stack trace in the event of phones log.  (The phone still works ok, it's just the single application that froze).

  Unfortunately the user having the problem that's about 3 000 mi away from me, so I can just plug in the phone and use the option 'connect to the device.

  Doug

  Update: I guess I could always send to the user another app... one who deliberately misbehaves...

  You can trigger a stack trace by launching a Throwable.  You can take in your application so that the user sees no error dialog box.

• Is it possible to trigger a popup of f: selectItem

  I have a use case, where I have a dropdown list (selectOneChoice), which displays a list of existing homes to oracle, and last label gives the user an option to "create a new location.
  I tried something like below:
  
  < af:selectOneChoice id = "ohSelector" >
  < f: selectItems value = "#{row.candidateHomes}" / >
  < f: selectItem id = "selectNewHomeItem".
  itemLabel = "#{patchAutoUiBundle.CLONE_CREATE_NEW_LOCATION}" >
  "< af:showPopupBehavior triggerType = ' click on ' popupId =": createNewOhPopup "/ >"
  < / f: selectItem >
  < / af:selectOneChoice >
  
  now, I see an error on jdev, that af: showPopupBehavior should not here.
  I don't see separate events for a selectItem listener.
  
  Is - this mandatory, than selectItem all even action listener

  Hello

  Welcome to OTN.

  You can use af:inputComboboxListOfValues instead of af: selectOneChoice. In af:inputComboboxListOfValues, you add a custom action (say create) and specify the popup for it.

  http://docs.Oracle.com/CD/E17904_01/apirefs.1111/e12419/tagdoc/af_inputComboboxListOfValues.html

  Arun-

• BlackBerry Q10 where (in the menu wich) can I trigger the "manually sync" with my Google account

  I chose "Manually sync" for my Google account, but I can't find the menu/button to trigger this synchronization manually.

  The hub, click on the three dots at the bottom right and select "Refresh". It is the only way to do it. You must do the same in the Contacts and calendar, except under Contacts, you drag down from the top to the refresh option.

• Exempt / substitute a VM from a definition of the alarm

  I have a problem where a single virtual machine regularly has high CPU usage and trigger the alarm to default CPU.  I want to turn off the alarm of CPU on this virtual machine unique but want to leave it enabled on all other virtual machines.  I met someone with the same problem in this thread, what is old enough:

  Re: Substitution alarm

  Is it possible to substitute a definition of the alarm, or exempt a particular object to inherit the alarms configured at a higher level?  I know I can remove the definition of alarm CPU on the top-level object and create alarms of CPU for all other virtual machines manually, but that's not really what I'm looking for because it's a lot of work and it requires me to do not forget to create a CPU alarm whenever I create a new virtual machine.

  Is what I'm trying to do possible?

  Hello

  It is not so complicated, you can start with particular alarm (i.e. high CPU usage) on level of vCenter... then at the data center level

  Create two folders, one for VM you want to exclude the folder second alarm of CPU for other virtual machines.

  Next right on second alarm of CPU to recreate folder to make it spread to all other virtual machines.

  When you create a new virtual machine, simply place it in the right folder with desired awakening group.

  Although its not perfect for your case... you can also disable the alarm action at all to object to specific infrastructure.

  Just right click on VM - > alarm - > disable the stock alarm

• Re: Toshiba Gigaframe Q81 - audio how custom as alarm

  Hello guys,.

  I hope someone can help me.

  I use my photoframe as a wake-up call, but I can not set up audio as an alarm.

  There are two positions of the alarm settings: 'default' and 'music', but there is no difference between these two modes, the gadget plays just "rrring".

  Is it possible to customize the alarm?
  The user manual is too poor :(

  Thank you very much!

  Hello

  You said that this Gigaframe Q81 has two options: 'default' and 'music '.
  Maybe you could use the second music option, but only if you could get access to some music files?

  I found a page on the internet and it is said that the Q81 Gigaframe supports these audio formats:
  MP3, AAC, OGG

  Sorry I can only give you a few suggestions because I m not an owner Gigaframe

• Is it possible to route signals of relaxation between two chassis PXI-1002 with the PXI-8335?

  Hello

  as the subject says, I am interested in the delivery of a signal to trigger between two chassis PXI-1002. At present, these two chassis are connected by a MXI - 3 system using maps PXI-8335. The software is Labview 2010 sp1 and 380 NIScope drivers.

  We want to keep (a PXI-5122 by chassis) scanners supply separated due to the requirements of our measure! The chassis are connected via cable to fiber optic. This explains why I can not just use the shutter release in Star, or connect via 'Trigger' or 'clk' cards (the inputs / outputs to the front of the cards).

  I found a few examples, but they seem to all be designed for use with a chassis only, I'll call later to the examples that inspired me to this point. Each guide explaining the synchronization of several chassis systems seems to use another material or VI is not accesible to me. This makes me wonder if my hardware has the capacibilities I need.

  The first picture shows approximately where I started from (sorry I can't post VI, confidential...):

  Only the middle part is interesting. Two sessions are initialized and manipulated parallel, trigger too. This has led to delays in the signals and should now be fixed. This apart from the VI works fine.

  Goal is to trigger only on one channel but both devices! If possible, the device will trigger must be chooseable.

  I started to rebuild the VI using the "EX Synchronization.vi 5xxx niScope' seeming spontaneity. The result is shown in the following image:

  

  I tried different RTSI lines, but had no positive results. only the main channel has triggered.

  After this first approach, I looked in the "niScope EX .vi multi-Device configured Acquisition (TClk)" and other examples of TClk which seem to work for similar problems. The VI of reconstruction can be seen in the following images:

  

  (Sorry, I had to use two photos..)

  In this case, I didn't have no choice for trigger lines, it would automatically set the VI TClk. I tried to trigger on both devices, though. This second approach seemed promising to me, but it was an error:

  "niTClk Synchronize.vi:1".

  Index (starting at zero) of the session: 1

  The error reported by the pilot of the instrument:

  No registered trigger could be found between the
  devices on the route.

  If you have a PXI chassis, the chassis correctly identify in
  MAX and make sure that it has been configured correctly. If you use PCI
  devices, make sure they are connected with a RTSI cable and that the cable RTSI
  is saved to the MAX. Otherwise, make sure that there is an available trigger line
  the trigger bus shared between devices.

  Source device: PXI1Slot4

  Target unit: PXI2Slot4

  Status code:-89125niTClk Synchronize.vi:1

  Index (starting at zero) of the session: 1

  The error reported by the pilot of the instrument:

  No registered trigger could be found between the
  devices on the route.

  If you have a PXI chassis, the chassis correctly identify in
  MAX and make sure that it has been configured correctly. If you use PCI
  devices, make sure they are connected with a RTSI cable and that the cable RTSI
  is saved to the MAX. Otherwise, make sure that there is an available trigger line
  the trigger bus shared between devices.

  Source device: PXI1Slot4

  Target unit: PXI2Slot4

  "Status code:-89125"

  This error came back even after I've identified this drug as possible to the MAX, as shown in the screenshot:

  

  In some of the textbooks, they showed how to get the MAX trigger lines, but as you can see, there is only booking options in my MAX. Whatever I do, I can't find options to define how to get my trigger signals...

  In principle, it is possible to trigger instruments in different chassis, which is indicated in this Guide and others... the question that remains is can it be done with my set of components?

  I understand that the use of multichassis compromised the integrity of the lines very adjusted as trigger in Star etc., so the configuration should be taken into account in some way, that my approach does not, I knew... But there must be a way to do this? And to start: to get just any signal from one device to the other trigger!

  For any advice on this issue, I would be very thanfull!

  Concerning

  Max1744

  Hi Max,.

  Thanks for the detailed post and explanations of your application and requirements. You're right using TClk, because this is the optimal method to synchronize the 5122 digitizers. The original VI you worked with is unique for some of the legacy scanners and does not directly work with scanners based on the most recent CMS (for example the 5122). The good news is that you can synchronize these cards to separate chassis, but it will use the calendar 66xx and synchronization (T & S) cards in the chassis of the master and the slave, as indicated in the guide that you have accessed. These are needed because a common reference clock must be shared between them as well as a couple of tripping. MXI itself can not handle export triggers and clocks, so there is no way to do this without physically wiring between the chassis with cards T & S. Unfortunately, regardless of what specific method, you use for synchronization, it will take a material extra beyond what you currently have.

  As one of your needs looks like it is necessary to retain wiring between the chassis directly, you may need to consider to synchronize using 1588 or GPS protocols. 1588 Protocol is a system for synchronization on the network while GPS course use antennas and locks for a common wireless signal. Although these synchronization methods may allow you to keep your chassis isolated, they will also require some manual configuration because you would be able to use the TClk synchronization and so the level of synchronization you can get between the cards may not be as good that can physically wire signals between the chassis using T & S cards.

  Hope this helps,

• Alarm warning CDXGT56UI

  The staes alarm warning manual can be cut through the select button, but no "CAUT Alm" icon is displayed when I scroll the parameters. Is it possible to disable the alarm warning?

  Thank you

  I recently bought a dxgt56ui and I would like to disable the alarm attention, CAUT alm. CAUT alm icon does not come to the high slot selection as button indicates the operating manual. Does anyone know how to disable the CAUT alm?

  Thank you

• How can I change alarm

  Hello

  I would try the following, please provide your inputs!

  I am using PowerCLI to change the Type of trigger for alarm 'Datastore Disk use %' warning and alert of 75/85 for a new watermark.

  Is this possible? Any help would be really appreciated. Thank you very much!

  

  With the current construction of PowerCLI, you cannot change triggers yet, but you can use the API.

  Something like that

  $alarmName = "Datastore disk usage"$newYellow = 80$newRed = 85$alarm = Get-AlarmDefinition -Name $alarmName
  
  $spec = New-Object VMware.Vim.AlarmSpec$spec.Enabled = $alarm.ExtensionData.Info.Enabled$spec.Description = $alarm.ExtensionData.Info.Description$spec.Name = $alarm.ExtensionData.Info.Name$spec.Expression = $alarm.ExtensionData.Info.Expression$spec.Expression.Expression[0].Yellow = $newYellow * 100$spec.Expression.Expression[0].Red = $newRed * 100
  
  $alarm.ExtensionData.ReconfigureAlarm($spec)
  

• Set alarm when the ROOT user login

  Hello forum!

  Is it possible to configure an alarm trigger to let me know when the ROOT account is used in vCenter or any ESXi?

  Thank you!

  Jorge G.

  Take a look at this post for the solution - http://www.virtuallyghetto.com/2011/10/how-to-create-vcenter-alarm-to-monitor.html

  BTW - unless you have created a user called "root" on your vCenter server, you will most likely only need follow this your ESX(I) hosts and not vcenter server