Is it possible to trigger a popup of f: selectItem

Similar Questions

• Is it possible to trigger a function Javascript C++ QML?

  Is it possible to trigger a function Javascript C++ QML?

  Just look at the section of signals and slots that documentation for examples of how to define and send signals of C++. Then in your QML, where you have exposed your C++ object as a property of context (named, for example, "foo"), you would foo.signalName.connect (myJsFunction) in a certain place like maybe onCreationCompleted. Connects the signal to the function, and when it is executed will be called the JS function.

  In short, the real connection between the two is trivial, as long as you already have all the side "C++ object and signal and exhibitors being C++" processed things.

• It is possible to omit the popup warns "do you want to replace the existing file?

  Well, the title says already

  I have an application where the user can save the results to a log file; These data are added

  (using OpenFile (file_name, VAL_WRITE_ONLY, VAL_APPEND, VAL_ASCII), so the opening of this file will not replace its content, but it adds up.) It would be appropriate to use the same file.

  Unfortunately, when the caller (FileSelectPopupEx) and selecting an existing file of the warning that appears the file already exists. It's OK. But the message keeps saying "want to replace you? In this case, this message is quite confusing for the user, because the program will not replace anything (which of course does not function FileSelectPopupEx).

  So I was wondering if it is possible to avoid or change this message popup?

  Thank you!

  What constant you spent buttonLabel parameter? The behavior of the function changes depending on the indicated button. In particular, (citing the help):

  Note   If VAL_SELECT_BUTTON or VAL_LOAD_BUTTON is passed to the parameter buttonLabel, FileSelectPopupEx service confirms that the selected file exists. If the file does not exist, the function prompts the user to select an existing file.

  Using the button "Save" should result in the confirmation message that you face now.

  I guess if you are using the simple OK button no prompt (to confirm: I'm not sure but I can't test it at the moment).

• Possibility to get a popup to display the display value "" and not the "return value".

  Version - Application Express 3.2.1.00.11

  I have a list of values that exceed 1500 files and am so impossible to use a Select list.

  When you use a popup lov after choosing the recording, apex displays the return value (in my case a number). Is it possible to let him use the display value (in my case, a text string).

  Concerning

  Ben

  Benton says:

  Version - Application Express 3.2.1.00.11

  I have a list of values that exceed 1500 files and am so impossible to use a Select list.

  When you use a popup lov after choosing the recording, apex displays the return value (in my case a number). Is it possible to let him use the display value (in my case, a text string).

  See limiting the number of values in a LOV

  If it comes to a page element, and then change the type of Popup LOV key.

  If there is a control in a table, it's another reason to upgrade to a supported version, or the tabular form will need to be converted to be manually generated and processed in order to allow the appropriate control be returned using the apex_item.popupkey_from_lov method

• Is it possible to trigger an alarm manually?

  Hello

  One of our LUN presented to the ESXi host gets a warning message (disk space is greater than 75% used).

  I have reset the alarm but my manager wants the visual alarm.

  Is it possible for me to force the alarm triggered again so that I can show him?

  Thank you

  Post edited by: TonyJK

  Yes, its possible. Go to the vcenter select the alarm tab,.

  If you change the value in the configuration of your its retrigger the alert alarm.

  Select your type of alarm must be > use of the data on disk store > Double click and go to the tab reports > spend alert reporting period from 5 > 4 or 5<6 minute="" it="" will="" rescan="" the="" datastores="" and="" re-trigger="" the="">

  You can change the value later.

  its only twist to visible alarm again in case you have disabled it. It will be useful.

• Is it possible to use the popup describe regime in a package?

  Hello.
  
  my version of SQL Developer: 2.1.1.64
  
  When I use the popup describe (SHIFT + F4) for a table, he lets me see all columns in a pop-up window.
  When I use popup describe for the name of the package or function/procedure he open package specification or procedure/function text in a separate tab.
  but when I use popup describe a procedure/function who, in a package (for example pkg_test.myPoc), it shows me "no object found: pkg_test.myProc.»
  I woud you want to see all the parameters of the pkg_test.myProc procedure in the pop-up window. is this possible?

  I tested it in the SQL worksheet (rather than the PL/SQL Editor), but I see the same behavior as you when I try with your example in the PL/SQL Editor. A small trial suggests that the problem is that the idea of completion does not include the context where it is located in the PL/SQL and so does not know what are the options in the list.

  If I try to add at the end of the new procedure and then return to the after the "(":) "

  procedure Proc_test_call
  is
  begin
   pkg_test2.proc_test2(
  end proc_test_call;
  

  I just started to get and declare both that options - IE some completed think I'm more in the package (like the other components of the package not listed) and start a new block.

  If I try to add an assignment before the procedure call (not logic, I know, but I had tested with a function in my schema):

  procedure Proc_test_call
  is
  begin
    result := pkg_test2.proc_test2(
  

  I get that we should (parameters proc_test2 and elements of local scope).

  Your solution to add the backet of closure of the procedure call allows the insight of completion understand the context where it is and so it can give the right options.

  I already avoided insight completion parameter earlier versions had performance problems large when it is connected to a drawing with a large number of PL/SQL objects (our scheme has 5.5 million records in all_arguments), but performance has certainly been set. However, the PL/SQL Editor always seems pretty hit and Miss as to whether the idea of completion parameter works, which seems in large part because it is not always the context where it is in PL/SQL.

  theFurryOne

• Is it possible to trigger a forced memory stack trace?

  There, I think of the stack trace that is done automatically on all running applications when "something goes wrong.

  I have an application that freezes up (I suspect it is a blocking of the thread) and it would be great to have a practical method to force the stack trace in the event of phones log.  (The phone still works ok, it's just the single application that froze).

  Unfortunately the user having the problem that's about 3 000 mi away from me, so I can just plug in the phone and use the option 'connect to the device.

  Doug

  Update: I guess I could always send to the user another app... one who deliberately misbehaves...

  You can trigger a stack trace by launching a Throwable.  You can take in your application so that the user sees no error dialog box.

• To trigger the popup

  < police = "Times New Roman" color = "35349F" size = "3" >
  Hello
  How can I increase the popup from somewhere in another event in the same class of java?
  < / make >

  Hello
  Miss you OKPressed Login4.java method, Add add and try...

      public void OKPressed(javax.faces.event.ActionEvent actionEvent) {
          // Add event code here...
         getNewPopup().hide();
      }
  

• How can I bypass the popup: '"Appname" would like to know your position. Allow or deny.

  Hello:

  I'm an Android Developer. I'm playing with this firefox os now and try to create applications.
  Its very cool. I liked it so far
  I installed it on my nexus and emulator

  So, I created a button for one of my test apps to access the user's current location.
  When I click on it - it is said:

  "Appname" would like to know your position.
  Allow or deny (buttons)

  Is it possible to ignore this popup?
  It is an implementation of privacy in the HTML5 geolocation API. fix?
  Can I get around this?
  If so, where the code is located?

  Please see the attachment for the popup.
  Thank you

  -John

  Where to go for support the developers

• Tecra M5 - annoying popup messages when fails the automatic BT connection to headset

  Hello

  I use my Bluetooth from Sony headphones to work with my Tecra M5 laptop lately and there is a boring bunch of message that keeps popping up.

  In the bluetooth settings, I ticked the box "auto login feature will be validated. This causes the headset to connect automatically and it works a treat.

  But, when I bring my laptop home I did more than my helmet with me and about every 5 minutes my laptop keep showing these annoying messages popup at the bottom right of my screen saying the "auto login failed, please ensure that your bluetooth device is turned on etc...". ".

  Sometimes it gives me a prompt in the lower right of the screen asking me if I would like to disable the "automatic login" function for headphones.

  Is it possible to disable these popup messages annoying when my headphones are not detected, without having to turn off the option "auto-connect"? I want to leave the function "automatic login" enabled so when I get back to work and back on my headset again, it will be always connected automatically.

  But when I get home, I wish I could continue to do stuff on my laptop without contstantly being bothered by these electronic popup. If there is some sort of registry setting or something to turn them off, that would be great.

  I downloaded and installed the Blueooth battery & Driver Version 6.40

  See you soon

  Toshiba gave me a beta version of the next Bluetooth stack. There the option you are looking for. Just disable the setting in
  "Bluetooth-> Bluetooth-> Options-> Audio settings-> display a message when the device is connected."
  So just wait until this version is available for download.

• Is it possible to route signals of relaxation between two chassis PXI-1002 with the PXI-8335?

  Hello

  as the subject says, I am interested in the delivery of a signal to trigger between two chassis PXI-1002. At present, these two chassis are connected by a MXI - 3 system using maps PXI-8335. The software is Labview 2010 sp1 and 380 NIScope drivers.

  We want to keep (a PXI-5122 by chassis) scanners supply separated due to the requirements of our measure! The chassis are connected via cable to fiber optic. This explains why I can not just use the shutter release in Star, or connect via 'Trigger' or 'clk' cards (the inputs / outputs to the front of the cards).

  I found a few examples, but they seem to all be designed for use with a chassis only, I'll call later to the examples that inspired me to this point. Each guide explaining the synchronization of several chassis systems seems to use another material or VI is not accesible to me. This makes me wonder if my hardware has the capacibilities I need.

  The first picture shows approximately where I started from (sorry I can't post VI, confidential...):

  Only the middle part is interesting. Two sessions are initialized and manipulated parallel, trigger too. This has led to delays in the signals and should now be fixed. This apart from the VI works fine.

  Goal is to trigger only on one channel but both devices! If possible, the device will trigger must be chooseable.

  I started to rebuild the VI using the "EX Synchronization.vi 5xxx niScope' seeming spontaneity. The result is shown in the following image:

  

  I tried different RTSI lines, but had no positive results. only the main channel has triggered.

  After this first approach, I looked in the "niScope EX .vi multi-Device configured Acquisition (TClk)" and other examples of TClk which seem to work for similar problems. The VI of reconstruction can be seen in the following images:

  

  (Sorry, I had to use two photos..)

  In this case, I didn't have no choice for trigger lines, it would automatically set the VI TClk. I tried to trigger on both devices, though. This second approach seemed promising to me, but it was an error:

  "niTClk Synchronize.vi:1".

  Index (starting at zero) of the session: 1

  The error reported by the pilot of the instrument:

  No registered trigger could be found between the
  devices on the route.

  If you have a PXI chassis, the chassis correctly identify in
  MAX and make sure that it has been configured correctly. If you use PCI
  devices, make sure they are connected with a RTSI cable and that the cable RTSI
  is saved to the MAX. Otherwise, make sure that there is an available trigger line
  the trigger bus shared between devices.

  Source device: PXI1Slot4

  Target unit: PXI2Slot4

  Status code:-89125niTClk Synchronize.vi:1

  Index (starting at zero) of the session: 1

  The error reported by the pilot of the instrument:

  No registered trigger could be found between the
  devices on the route.

  If you have a PXI chassis, the chassis correctly identify in
  MAX and make sure that it has been configured correctly. If you use PCI
  devices, make sure they are connected with a RTSI cable and that the cable RTSI
  is saved to the MAX. Otherwise, make sure that there is an available trigger line
  the trigger bus shared between devices.

  Source device: PXI1Slot4

  Target unit: PXI2Slot4

  "Status code:-89125"

  This error came back even after I've identified this drug as possible to the MAX, as shown in the screenshot:

  

  In some of the textbooks, they showed how to get the MAX trigger lines, but as you can see, there is only booking options in my MAX. Whatever I do, I can't find options to define how to get my trigger signals...

  In principle, it is possible to trigger instruments in different chassis, which is indicated in this Guide and others... the question that remains is can it be done with my set of components?

  I understand that the use of multichassis compromised the integrity of the lines very adjusted as trigger in Star etc., so the configuration should be taken into account in some way, that my approach does not, I knew... But there must be a way to do this? And to start: to get just any signal from one device to the other trigger!

  For any advice on this issue, I would be very thanfull!

  Concerning

  Max1744

  Hi Max,.

  Thanks for the detailed post and explanations of your application and requirements. You're right using TClk, because this is the optimal method to synchronize the 5122 digitizers. The original VI you worked with is unique for some of the legacy scanners and does not directly work with scanners based on the most recent CMS (for example the 5122). The good news is that you can synchronize these cards to separate chassis, but it will use the calendar 66xx and synchronization (T & S) cards in the chassis of the master and the slave, as indicated in the guide that you have accessed. These are needed because a common reference clock must be shared between them as well as a couple of tripping. MXI itself can not handle export triggers and clocks, so there is no way to do this without physically wiring between the chassis with cards T & S. Unfortunately, regardless of what specific method, you use for synchronization, it will take a material extra beyond what you currently have.

  As one of your needs looks like it is necessary to retain wiring between the chassis directly, you may need to consider to synchronize using 1588 or GPS protocols. 1588 Protocol is a system for synchronization on the network while GPS course use antennas and locks for a common wireless signal. Although these synchronization methods may allow you to keep your chassis isolated, they will also require some manual configuration because you would be able to use the TClk synchronization and so the level of synchronization you can get between the cards may not be as good that can physically wire signals between the chassis using T & S cards.

  Hope this helps,

• Disable UUT result Popup after DUT finished

  Hello

  I want to automatically test a sequence x times. I have a labview.vi that count the number of the object to measure up, so I don't have to set each time the number by myself. But after each sequence / use I need to check the popup DUT result to start the next sequence / use.

  Is it possible to disable this popup that UUT following can operate automatically if the last finished?

  I use Teststand 2010.

  You can use the PostUUT/PreUUT callbacks.

• HOW CAN I DISABLE POPUPS OF BALL FOR THE DASHBOARD OF THE SSD?

  Hello - I am getting popups in taskbar notification bar when I close the dashboard of SSD.  He tells me to click on the SSD to open the dashboard again.  I have to click on the "X" in the ToolTip window to remove the popup and sometimes it will come back several times if I do not open the dashboard.  How is it possible to disable the popup balloon?

  I use a PC with the Windows Vista operating system.

  Thank you

  Hello

  in this case I suggest to close the whole software and not let it run with windows, all the time because it is not necessary. If you can open the software once a week to check the status of the ssd and close it again.

  I don't think there's a way to disable the pop ups

• Menu popup screen blocks button

  Is there a possibility to push this popup without blocking the menu button?

  Your onMenu does not display a menu - it only fills (onMenu vs makeMenu).

  It should be more like:

  {} public boolean onMenu (int last instance)

  last screen prevScreen = getScreenBelow();

  Close();

  UiApplication.getUiApplication () .invokeLater (new Runnable() {}

  public void run() {}

  prevScreen.onMenu (instance);

  }

  });

  Returns true;

  }

• "clear connection" popup

  From time to time I encounter this pop-up:

  Although this page is encrypted, the information you entered will be sent over an unencrypted connection and could easily be read by a third party.
  Are you sure you want to continue to send this information?

  My hypothesis is that this source of Microsoft. If so, is it possible to block the popup?

  If you're using Internet Explorer, you can disable this option in THE Options on the Security tab.

  But what I've found, is that this message is generated by Mozilla Firefox as a warning when the page is encrypted, but this isn't the transmission of your form data.  I don't personally know if Firefox has an option to disable this option.  You can consult with experts of Firefox here.