Is it recommended to compile reports 6i in the generator of reports 10g?

Similar Questions

• Can anyone recommend a compatible 3G card for the Satellite P10

  Can anyone recommend a compatible 3G card for the Satellite P10?
  I tried to use a vodafone gprs card that the machine would not work with.

  Thank you

  Hello

  You want to buy a PC WiFi 3 G/GPRS card?
  These cards use the PCMCIA port and should work on most laptops that provide this PCMCIA location.
  I think you'll find many cards if you googel in the internet.

  Check it out and

• INTEL FORTRAN COMPILE / VISUAL STUDIO FOR THE ASPEN SIMULATION

  Hi all

  I have little knowledge about the use of FORTRAN with application of this on VISUAL STUDIO. In fact, I know about these software because of the obligation for them to rewrite some code I had to rewrite before running on ASPEN Plus.

  My problem is, I want to run a simulation Aspen Plus using the soft articles in question, but I honestly don't know how to go for them, as all this seems confusing. I have already installed the compiler FORTRAN and Visual Studio, but I don't know which platform to extract the entry codes I need to compile.

  The codes that I needed to re - compile in Intel FORTRAN, which is compatible with the Aspen has been compiled previously using Silver frost 95.But FORTRAN, after compilation by using this software in Silver frost, codes does not work on Plus.It of Aspen was a few days ago I learned this can never work on ASPEN Plus Hence the need to install the compatible software.

  (1) what it means to re - write a written code previously in Silver frost FORTRAN 95 or other FORTRAN codes in Intel FORTRAN compiler code and what is the procedure for that?
  (2) after having rewritten in Intel FORTRAN codes codes using Intel FORTRAN compile, how I performs the following steps before finally launching the simulations using Aspen:
  b compile the user model?
  (b) models of the user shared a link in a Fortran Library procedure?
  (c) provide the files objects or shared for the Aspen Plus system libraries?

  Any positive contribution will be highly appreciated.
  Gee right.

  Hi, Ghislain law

  Your message is addressed in the discussions on these Microsoft Community forums. It is better suited for the MSDN Developer audience. Please click on the following link and post your question in the appropriate forum.

  MSDN forums: Index

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Concerning

• FPGA Compilation fails because of the mistake of Xilinx

  My FPGA compiles and I cannot understand why. There is nothing crazy in my FPGA VI of really, it seems strange to have this type of problem. I can't reach the code because its owner, but it's pretty simple because it reads all channels from a single module and records them in a data FIFO. I have compiled successfully any FPGA code on this computer, so I should definitely have everything needed to compile.

  My system consists of one NOR cRIO 9030 with a single module 9220. Below is the Compilation of summaries.

  ---

  LabVIEW FPGA: Compilation failed due to an error of Xilinx.

  Details:
  ERROR: [Synth 8-1031] knidmahighspeedsinkbase is not declared [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:295]
  ERROR: [Synth 8-1031] knidmahighspeedsinksize is not declared [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:296]
  ERROR: [Synth 8-1031] knidmahighspeedsinkbase is not declared [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:301]
  ERROR: [Synth 8-1031] knidmahighspeedsinkbase is not declared [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:302]
  INFO: [Synth 8-2810] pkgshimswitchedlinkdmaportifc unit ignored due to previous errors [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:68]
  ---------------------------------------------------------------------------------
  Development of finished RTL: time (s): UC = 00:00:07. delay = 00:00:31. Memory (MB): peak = 798.605; gain = 204.203
  ---------------------------------------------------------------------------------
  ERROR: [Common 17-39] 'source' is not due to previous errors.
  INFO: [Common 17-83] release license: synthesis
  3 info, 0 Warnings, 0 critical warnings and 4 errors.
  synth_design failed
  : ERROR: [Common 17-39] 'source' is not due to previous errors.

  When running
  «source - notrace.» /. Xil/Vivado-6035-ip-10-60-203-176/realtime/toplevel_gen.tcl ".
  called inside
  «synth_design-top "toplevel_gen" - part "xc7k70tfbg676-1"-"full" flatten_hierarchy "»»
  (file "/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/synthesize.tcl" line 21)
  called inside
  "source" / opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/synthesize.tcl "" "
  exit #.
  INFO: [Common 17-206] exit Vivado at Tue Mar 24 23:58:54 2015...

  Compile time
  ---------------------------
  Introduction date: 24/03/2015-16:46
  Date recovered results: 24/03/2015-17:00
  Waiting time in the queue: 00:24
  Compilation of time: 13:22
  -Generate a Xilinx IP: 00:00
  -Summarize - Vivado: 01:27

  Compilation has restarted on
  24/03/2015-16:57

  ---

  Any help would be much appreciated!

  Thank you

  James.Morris wrote:

  Okay, so it seems that I get the error with a project from scratch and an FPGA with a single command and an indicator.

  I download the latest FPGA 2014 SP1 installation and I hope that will solve my problem.

  Well I'll mend, which fixed the problem! Somewhere along the line, my install FPGA must be corrupted.

  Thanks for the help, guys.

• After you run a PC Optimizer program, it is strongly recommended that you register and use the full version of Optimizer Pro, are - this a comeon?.

  After running a PC program optimizer it tells me how many there are mistakes and States: completely optimize and clean your computer, it is strongly recommended that you register and use the full version of Optimizer Pro, are - this a comeon?.

  "is this a comeon.

  Yes, a very common scam.
  As suggested Palcouk avoid "optimizers". Also to stay away from on the 'free' online virus scans, analyses of driver, registry cleaners and something similar who wish to access your machine in real time.

  For the most part all you need is to run Windows Disk Cleanup and do a casual drive defragment (don't defragment SSDS so, single drive type hard disks).
  For something a little more thorough you can use CCleaner (but do not use the registry cleaner - not necessary or desirable) CCleaner is open source (free).
  And if you need a bit more disk space to uninstall the software, you do not use.
  .

• Problem with cgicmd.dat in reports 10g

  Dear Sir/Mam,
  
  I configured serve report on solaris 10. When running reports using web url with key mapping in the cgicmd.dat folder, I get a very strange problem. Regardless of settings m passing reports through a web url an additional "=" character is added automatically. I give you the details of the files below. Please help me. Thanks in advance.
  
  The content of rwservlet.properties: -.
  
  SERVER_IN_PROCESS = YES
  RELOAD_KEYMAP = YES
  DIAGNOSIS = YES
  TRACEOPTS = TRACE_ALL
  TRACEFILE = rwservlet.trc
  FIND = TRACE_REPLACE
  SERVER = test
  #IMAGEURL = http: / / < web_server_name >: < port_num > rwservlet/reports /.
  KEYMAPFILE = cgicmd.dat
  #DBAUTH = RWDBAUTH. HTM
  #SYSAUTH = RWSYSAUTH. HTM
  #ERRORTEMPLATE = RWERROR. HTM
  #COOKIEEXPIRE = 30
  ENCRYPTIONKEY = reports9i
  #DIAGBODYTAGS = < reports_servlet_help_file_title >
  #DIAGHEADTAGS = < reports_servlet_help_file_body_tag >
  #HELPURL = < url_of_customized_help_file_for_reports_servlet >
  #SINGLESIGNON = YES
  OID_ENTITY = % REPORTS_OID_ENTITY %
  #ALLOWHTMLTAGS = NO
  #REPORTS_NETWORK_CONFIG = rwnetwork.conf
  #OIDCON_INIT = 10
  #OIDCON_INCREMENT = 10
  #OIDCON_TIMEOUT = 0
  DEFAULTCHARSET = JA16EUC
  #DEFAULTCHARSET = EUC - JP
  
  The content of cgicmd.dat: -.
  
  osk47zgenp: report = 1% userid=utimainapp/utimainapp@testdb rundebug no = NO delimited = destype = cache mode desformat = bitmap mast_ext = roymask.xls p_start_dt = p_end_dt % %2 = 3 p_srvc_id = 4% p_sch_id = 5 p_agnt_cd = 6% p_user_id = %7 = 8% p_sesn_id %
  
  
  Reports URL is: -.
  
  http://10.10.100.110:8890/reports/rwservlet?osk47zgenp+rp_os424_mat_recon.RDF+30-Jun-2009+01-Jan-2010++31++Shashi+1492544
  
  Error coming on the browser: -.
  
  REP-110: file 'rp_os424_mat_recon.rdf =' not found.
  REP-0110: cannot open the file 'rp_os424_mat_recon.rdf ='.
  
  The content of rwservlet.trc: -.
  
  [2011/1/19 7:37:1:624] (RWClient:doGet) enter...
  From [7:37:1:625 1/19/2011] bug 50103 (RWClient:doGet): QueryString: osk47zgenp + rp_os424_mat_recon.rdf + 30-JUN-2009 + 01 - JAN-2010 ++ 31 +
  Shashi1492544
  [2011/1/19 7:37:1:625] 50103 (RWClient:processRequest) Info: recharge the key mapping file: s_reloadKeyMap: YES
  From [7:37:1:626 1/19/2011] bug 50103 (KeyEntry:replaceParams): report = rp_os424_mat_recon.rdf = userid=utimainapp@testdb rundebug = N
  O desformat = delimited destype = mode cache = bitmap mast_ext = roymask.xls p_start_dt = 30 June 2009 = p_end_dt = = p_srvc_id = 31 = January 1, 2010
  shashi = p_agnt_cd = 1492544 = p_sch_id = p_user_id = p_sesn_id =
  From [7:37:1:626 1/19/2011] bug 50103 (RWClientUtility:isFromPortal): Portal: null
  From [7:37:1:626 1/19/2011] bug 50103 (RWClientUtility:isFromPortal): webdbversion: null
  [2011/1/19 7:37:1:627] 50103 (RWClientUtility:findServer) Info: Failed to connect to the server: test
  [2011/1/19 7:37:1:627] 50103 (RWClient:startInProcessServer) WARNING: start the test server inprocess
  From [7:37:1:657 1/19/2011] bug 50103 (NetworkUtility:getIOR): find a server and returning the IOR
  From [7:37:1:658 1/19/2011] bug 50103 (ServerManager:getServer): object of class server Found
  From [7:37:1:659 1/19/2011] bug 50103 (ServerManager:getServer): ping server successfully
  From [7:37:1:660 1/19/2011] bug 50103 (RWClientUtility:getReportsServer): server: test
  From [7:37:1:660 1/19/2011] bug 50103 (ServerManager:getServer): object of class server Found
  From [7:37:1:660 1/19/2011] bug 50103 (ServerManager:getServer): ping server successfully
  From [7:37:1:661 1/19/2011] bug 50103 (AuthManager:getAuthId): secure server: false
  From [7:37:1:663 1/19/2011] bug 50103 (RWClientUtility:getReportsServer): server: test
  From [7:37:1:664 1/19/2011] bug 50103 (RWClientUtility:getReportsServer): server: test
  From [7:37:1:664 1/19/2011] bug 50103 (ServerManager:getServer): object of class server Found
  From [7:37:1:665 1/19/2011] bug 50103 (ServerManager:getServer): ping server successfully
  From [7:37:1:666 1/19/2011] bug 50103 (RWClientUtility:isFromPortal): Portal: null
  From [7:37:1:666 1/19/2011] bug 50103 (RWClientUtility:isFromPortal): webdbversion: null
  From [7:37:1:667 1/19/2011] bug 50103 (RWClient:runReport): cmdline: p_end_dt = January 1, 2010 = baseUrl = http://10.10.100.110:8890 / report
  s/rwservlet/GetFile/userid=utimainapp@testdb USER_AGENT = "Mozilla/4.0 (compatible;". MSIE 7.0; Windows NT 5.1; (Trident/4.0) ' p_srv
  C_ID = 31 = 10.10.100.110 SERVER_NAME = jobname = "rp_os424_mat_recon.rdf =' p_sesn_id = mast_ext = roymask.xls getFilestr = / not > imagekey = re"
  ports9i p_user_id = REMOTE_ADDR = 10.10.105.54 SERVER_PROTOCOL = HTTP/1.1 authid = RWUser = 30 June 2009 = mode p_start_dt = bitmap REMOTE_HO
  ST = 10.10.105.54 destype = cache SERVER_PORT = 8890 = shashi report = p_sch_id = "rp_os424_mat_recon.rdf =" expiredays = 0 ACCEPT_LANGUAGE = en
  -We desformat delimited = p_agnt_cd = 1492544 = rundebug = / rwservlet SCRIPT_NAME = NO
  From [7:37:1:668 1/19/2011] bug 50103 (ServerManager:getServer): object of class server Found
  From [7:37:1:669 1/19/2011] bug 50103 (ServerManager:getServer): ping server successfully
  From [7:37:1:669 1/19/2011] bug 50103 (ReportRunner:connectToServer): new connection request for userid: RWUser server: test
  From [7:37:1:673 1/19/2011] bug 50103 (ReportRunner:connectToServer): successful user connection: RWUser server: test
  [2011/1/19 7:37:1:709] 51022 (ReportRunner:Release) Info: Connection object has been released.
  [2011/1/19 7:37:1:711] Exception (110): File 'rp_os424_mat_recon.rdf =' could not be found.
  REP-0110: cannot open the file 'rp_os424_mat_recon.rdf ='.
  
  oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
  at oracle.reports.RWExceptionHelper.read(RWExceptionHelper.java:67)
  at oracle.reports.server._ConnectionStub.runJob(_ConnectionStub.java:504)
  at oracle.reports.client.ReportRunner.dispatchReport(ReportRunner.java:288)
  at oracle.reports.rwclient.RWReportRunner.dispatchReport(RWReportRunner.java:86)
  at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1671)
  at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1525)
  at oracle.reports.rwclient.RWClient.doGet(RWClient.java:366)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
  at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
  at oracle.security.jazn.oc4j.JAZNFilter.doFilter (unknown Source)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
  to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:192)
  at java.lang.Thread.run(Thread.java:534)
  
  From [7:37:1:711 1/19/2011] bug 50103 (RWClientUtility:isFromPortal): Portal: null
  From [7:37:1:711 1/19/2011] bug 50103 (RWClientUtility:isFromPortal): webdbversion: null
  From [7:37:1:716 1/19/2011] bug 50103 (RWClientUtility:isStatusFormat): statusformat: null
  From [7:37:1:717 1/19/2011] bug 50103 (RWClientUtility:isStatusFormat): statusformat: null
  [2011/1/19 7:37:1:717] (RWClient:doGet)... .exit

  Hello

  The document 341188.1 is available on http://support.oracle.com

  The problem is a bug fixed in the version of Group of patches 2 rel 2 reports 10g (10.1.2.2.0)

  Concerning

• Compile flexfield data in the tables of AOL.

  Hi hussein.
  
  I just applied the fix 8403254 and the steps of the post office is:

  Compiles flexfield data in the tables of AOL.
  Recreate grants and synonyms for applications or patterns
  Regenerate the BOM Messages.

  Where in ADAdmin AOL find?
  
  
  Thank you very much

  Hello

  Use f60gen.

  module f60gen =.

  . FMB userid = apps / output_file =.FMX module_type = form batch = yes compile_all = special

  f60gen module =.pll userid = apps / output_file = module_type .plx= library

  Kind regards
  Hussein

• [Reports 10g] Page: landscape, portrait, format, units

  Hello
  I can't set the units to centimeters and landscape orientation in mode on the page layout screen.
  I keep seeing a black portrait grid of 8.5 x 11 inches.
  Can I change these settings of the generator of reports or in a file 'reportsweb.cfg '.
  as in forms?
  
  Thanks a lot for your help.
  
  JBM.

  Hello
  go to the system setting
  under this ORIENTATION selection, Press f4 set initial value properties 'landscape '.
  return model available select main section press F4
  to properties: width: height 11, 8.5, orientation: landscape
  report width: 132 height ratio: 66

  is the CM unit:
  go to the template page layout: Select format--> layout--> leaders--> units options select centimeters

• Generation of reports overnight batch and printing (reports 10g on Linux)

  Hi all
  I was wondering if any of you out there are report generation through a process during the night it starts and runs reports (perhaps even generate and print simulateously).
  
  Reports Server 6i, we had a process that has generated requests (put them in tables of database with their settings). Then during the night, a scheduled task on the PC would be the kick-off and call the command that would begin to produce reports. The reports will be generated and sitting as files on a machine and when the person came, they just clicked a button print and it printed all the files generated from the night.
  
  I don't have to have the same concept for 10g at all, but I would like to see what others are doing so that maybe I can implement something similar possibly. Why reinvent the wheel, right?
  
  Any help is appreciated.
  
  Chris

  There is a db-package SRW in $ORACLE_HOME/reports/admin/sql that can be installed in the database and can be used to launch reports-queries the database, in combination with DBMS_JOB or DBMS_SCHEDULER you can do the scheduling of the report to the database.

• 500 internal Server Error while calling reports 10g

  I use independent forms and report services. I get 500 Internal Server Error intermittently while call reports 10g.

  500 internal error is a generic error and it could be due to several reasons such as a bad configuration or the scarcity of resources.

• How to repeat the same line more than once in the report 10g

  How to repeat the same line more than once in the report 10g
  
  If I print the barcode more than once
  in the report;
  
  Published by: user11106555 on May 9, 2009 05:50

  OK, thought it was just a recording, then try:

  SELECT COL
    FROM TABLE,
         (SELECT 1
            FROM DUAL
           CONNECT BY ROWNUM
  

• How to "BOLD" a static text in oracle reports 10g.

  Hi all

  I've created a report manually, I want "BOLD" type static text... I have tried with conditional formatting, but thanks to the conditional formatting, it not bold text, it "BOLD" fields only.

  How can I get "BOLD" static text. I tried with SRW, but it does not work...

  Here is the code I try, it gives no error when compiling, but it does not work...

  If (: emp_pension_type AS a 'RETIREMENT')

  then

  SRW.set_font_weight ('BOLD');

  end if;

  Windows server 2003 operating system

  DB 11g

  10g generator

  any help will be grateful...

  THANKS for the cooperation, I solved the problem with the method of column alias.

  Thank you very much, Mr.

• Errors 1 compiler - but nothing in the Panel!

  You try to compile a FLA that has not been changed since the last compilation. The backup will not compile as is.

  I get in my output panel...

  ReferenceError: Error #1065: UILoader Variable is not defined.

  ReferenceError: Error #1065: Undefined Variable ComponentShim.

  In the compiler error Panel, I see a vacuum, but it is said in the gray band

  "Total ActionScript errors: 1 reported errors 1.

  .. then how do I know where the error is to fix? There are a LOT of controls in this project, and out all components and re - create would take days.

  Please can anyone offer any help?

  Matt

  Edit: I checked that the compiler errors Panel works by typing nonsense in script - when I do this, I get an error message for the appropriate line and double click, it takes me to the error. I don't know how to check the features beyond that.

  Try a see if it helps.  Go to your publication of Flash settings and select the option to enable debugging.  That could help in identifying the line number where the error is encountered.

  Furthermore, the mistakes that you show them making that sound like it's some form of syntax/coding error where classes of objects are not designated correctly as they come through variables instead.

• Date in reports 10g

  Hi, after having migrated from 6i to 10g, my date field is printing the form ' *'. This is the current date and must be completed automatically on the page header. . I don't know how to increase the length of the field. because there is no paper view. any help will be greatly appreciated...

  Open, you're layout of report, click on "CHANGE the MARGIN" an available option in the report
  (means after section of trailer options are available). After this check shows what field date *,.
  Then select this field and increase the width,
  After compilation and run the report.

• Upgrade the generatation report toolkit OR

  Hey there,

  I have a few old screws that used to be in the (1.0.x) report generation toolkit I need to modify and upgrade.

  Generate report Set updated the Data.vi

  Generate data Get report to Modify.vi

  Get Data.vi report

  do not seem to no longer exists in the labview 2011 report generation toolkit.

  I can grap one old library I have on another PC that includes these missing screws, but then I have a problem with

  Generate the report objectrepository.vi which is password protected and not executable. It prevents screws from execution.

  Found a few discussions of froum NOR years ago on the forum or and a link from the Web site of NOR, but could not find any viable solution yet.  http://digital.NI.com/public.nsf/allkb/0C7100D6E9E4783B862575070055A499

  I wonder if there is someone who has already changed some probably screws with the new activex calls to replace the missing screws and managed to do the update successfully?

  Hi sezergin,

  I think that even if they are no longer on the pallets, they are always included in the report gen toolkit 2011. I found them on my file system under C:\Program Files (x 86) \National Instruments\LabVIEW report 2012\resource\importtools\NISH. Try labview to use these screws to score, they should have the same functionality, as they did in previous versions.

  There are usually other ways to produce this functionality using other screws in the Toolbox, that's why they are no longer included, but if you upgrade an existing piece of code, you can just keep it as it is.

  All the best