Is it useful to 512 MB of RAM to 2 GB - Equium L20

Similar Questions

• I have 512 MB of RAM, but the system is grateful that 448 MB. How can I fix? Thank you.

  I have AMD Athlonrocessor with 512 MB of RAM. Information on the system says that I have only 448 MB of RAM and the pc works really slow. This may be the cause and how can I solve this problem?  Thank you.

  Annica

  The other 64 serves as video ram and it's perfectly normal.  This isn't the reason why the computer is slow.  You have an old operating system, with very little ram, and I'm sure that you use a lot of app.

• I would like to install Windows XP on my computer and get rid of the Vista operating system. Can I do this? I only have 512 MB of Ram and 32-bit processor.

  Windows XP instead of Vista.

  I would like to install Windows XP on my computer and get rid of the Vista operating system.  Can I do this?  I only have 512 MB of Ram and 32-bit processor.

  Hello

  There are a few things that you would have to do to install XP instead of Vista:

  1. contact the manufacturer of your computer and see if the XP drivers are available for your computer model to make sure that XP has worked properly in this regard.

  2. If the XP Drivers are available, buy a XP disk operating system / license. Try local computer repair shops because Microsoft sells more than XP and online sale buy you pirated copies can cause. Be very careful.

  3 XP runs with 512 MB of RAM, although a little slow by today's standards.

  4. do a clean install of XP. Make sure that all your data is backed up as the hard will be cleaned of everything during the Installation of XP.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  Here is some information that you would like to learn more about improving the performance of Vista using ReadyBoost, you have only the minimum amount of RAM to run Vista:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  See you soon.

• When trying to install Windows 7 error you need 512 MB of RAM

  I WANT TO INSTALL WINDOWS 7 IN MY WINDOWS XP LAPTOP AND WHEN I START THE INSTALLATION IT COMES UP WITH "YOU HAVE ONLY 212 MB OF RAM INSTALLATION NEEDES 512 MB OF RAM' THEN OUTPUTS IT HOW CAN I ERASE THE RAM PLEASE HELP"

  WHAT SHOULD I DO?

  Hear you disk space or memory?

  If its space of hard drive, then you will need to uninstall some programs, backup personal files to an external hard drive or blank DVDs and then perform a custom installation.

  Since you will have to do a custom Setup, I recommend that you only use Windows Easy Transfer to save your data, then boot from the WIndows 7 DVD and do a custom installation.

  The upgrade to Windows XP?

  Please read these instructions carefully and completely before you begin installing Windows 7: there are important steps that you must follow to upgrade your PC from Windows XP to Windows 7 in order to preserve your files and settings.

  Before you begin, you'll need to backup all your data to an external storage device, and you will need all the installation discs for the programs that you want to keep. Please make sure that you have an external hard drive (see details below).

   

  More detailed instructions are available at windows.microsoft.com/upgrade-windows-xp. Here are the basic steps.

  1. start Windows Upgrade Advisor (windows.microsoft.com/upgradeadvisor) to see if there are known issues that may affect the installation and the question of whether you should install the version of 32 or 64 bit Windows 7.

  2 back up your files and settings on an external hard drive using Windows Easy Transfer (windows.microsoft.com/windows-easy-transfer). If you do not have an external hard drive, you will not be able to use Windows Easy Transfer. Alternatively, you can copy the files you want to keep on a USB stick, CD or DVD.

  3. you will need to manually reinstall your programs, such as Microsoft Office, after I installed Windows 7. Gather the installation for your programs and all partner/license product key discs. You may be able to download programs from the Internet. For example, Windows Live Messenger can be installed from the download.live.com/messenger.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)."

  5. when Windows 7 is installed, use Windows Easy Transfer to restore your files and settings.

  If you are not comfortable Windows 7 installation, check with a local retail or the services of the PC company store to see if they offer upgrade services.

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

  If his memory, you must have a minimum of 1 GB of RAM to be able to install Windows 7 32 bit.

• Satellite U305-SP2808 - I am using full 4 GB of RAM

  I have a Satellite U305 - sp2808 the processor is an Intel core (TM) 2 duo CPU T5450 I was reading syntactic processor and 64-bit, the BIOS version is 3.80 02/01/2008.

  My system is configured is posible to upgrade to WIndows 7 64-bit,
  I'm trying to use all the capacity of RAM (4 GB), but in the 32-bit version its imposible, uses only 3 GB.

  Please help me.

  Thank you.

  I put t know how to help with this.
  If your laptop is supported for Win7 64-bit to use it.

  If not... no luck.

• Equium L20-198 recognized not the 512 MB of ram after you add the 1 GB

  Hello, I added my Toshiba Equium L20-198 with a crack of 1 GB and there is already a 512 Mb slot installed in stock

  However only 896 MB memory is recognized by the Bios and xp Home Edt. -Any ideas?

  so the 512 MB not recognized at all and it apeares as not installed.

  The 1 GB is compatible with the 512 MB (available from stock)

  Http://www.crucial.com/UK/store/mpartspecs.aspx?mtbpoid=D21283D0A5CA7304 1 GB

  Why the 512 MB not recognized when I installed the 1 GB and when I removed the 1 GB, the recognized 512 MB and works perfectly?

  Hi Pop

  If you want to test with the new module of RAM 1 GB please try with PA3411U-1M1G. According to the specifications of it is compatible.

• Exe Explorer file process uses all the computers memory RAM

  I googled this question in many different ways and read the post until my eyes crossed. Tried several different

  ideas, checks, analyses, etc.

  This is on a Dell inspirion 3847 running Windows 7 Pro Service pack 1

  a Intel pentium CPU [email protected] Ghz, 4 GB RAM, 1 TB HD (no graphics card or any other card in pci slot)

  a brother MFC7360 n printer connected to the USB port.

  and the HD: (drive C O/S: 855 GB free of GB 909), (recovery E Drive: 17.5 GB free of 47 gb)

  The extent of the installed software is minimal, (only notable is Office 10, digital meal)

  (Digital software dining room is for the POS system), this computer is not the main computer that is running the POS system

  This computer is just linked to the actual POS in bar. (I stop this program and does not affect the)

  problem or situation that we were conducting.)

  (I can give list if necessary other software that is installed).

  And the essentially the only files on the computer (in addition to operating systems, programs, etc.) are Office, "Word files,

  Excel files.

  And a few txt, rtf, pdf, files (very small amount).

  first just noticed recently what happens, but I'm not the primary user on the computer. I checked

  and it seems that no new software or program have been recently installed or changed.  I have a little

  understanding of what the process Explorer exe is and it functions. (NOT a PRO, not a total newbie,)

  If all goes well enough to find help, and not enough to totally screw up.)

  I'll be watching this thread several times per day until solved if need more information, I'll give you...

  Here are the details of the problem:

  random computer freezes, or runs very slowly or get "out of memory" message (during the attempt

  to open any random program) and when...

  I opened the the Task Manager and in "processes" tab, it shows that there is:

  2 examples of "Explorer"exe "running... it uses a small amount of RAM (approx. 10-15 mb)(with nothing)

  Open, other than the Task Manager). Another example of "Explorer"exe "uses (starts on the same amount of)

  RAM use, without having to open anything else) it will start using more and more RAM up to uses almost all

  the available 4 gigabytes of RAM. Also during this process it uses randomly between 0 and 99% of the CPU.

  The CPU usage seems to vary (couldn't see any stable model).  the amount of RAM used begins bass

  then goes very high and the rest standing for this purpose during a random time. (then sometimes descends

  on its own within 1-5 min.). (sometimes does not lower for awhile). More details needed let me

  know, I'll check all speeds or time it takes for the situation to occur, (if necessary)

  TASK MANAGER:

  I opened the location of two Explorer exe files (both take me C/Windows"... ». (same for both

  not a system 32 file, or any other subfolder, just to 'Windows '.

  The two exe process explore "Descriptions" are listed as Windows Explorer.

  I have "Complete the process" towards the 2nd exe explore (one with high memory usage), just that process and she stops to

  a short period of time (and all works well for the time), but even once, it reappears (no exact time frame on how long until)

  Returns), (can check again and again, if necessary), to see if time is right each time to restart the process.

  If I "End process" to the 1st exe explorer (one with normal memory usage), I lose my office. (which from what

  I understand what needs to happen).

  Also get the same results if the process of "End process Tree" for the 1st and 2nd explore exe.

  Checking "properties" of two everything seems the same info. On the 'details' tab shows all of Microsoft, not

  of course, what happens if an info is important. (any info where necessary, I get and publish as needed).

  I know more and different information is no "resource monitor". but was not sure what would happen if, any info of

  It has been necessary.  If necessary you will get what that is. (let me know this as necessary).

  I've scanned any computer with 3 different anti virus (found nothing) programs

  I ran spybot search & destroy found nothing that had to do with this issue and fix some other issues that we found.

  A little info in 'Folder Options' (the 'windows folders in a separate process to launch' is NOT checked.

  and all the options are defined for the default settings (I think) (not sure if this is important)

  like I said read several messages in various forums (on similar sounding problem)... Some say spoke with

  Microsoft technical support who say 'must be the virus', others say started after the recent "windows update" and others

  say the problem of virtual memory and others say he's changed banks 'office' or the 'thumbnails previews.

  These files, and the other says "shell extensions" are the problem. (many recommended (ShellEXView), to)

  Disable all non-microsoft extensions). I was not looking for it.  My problem does not appear to be any good

  program, type file running that is causing this. It seems to happen when the computer is idle (I realize there are always some)

  process background or system running) but it doesn't have to be all open programs.

  At this point, I am open to almost any idea or suggestion.  I will continue to monitor the post until resolved and will get a

  In addition to the information required (less the credit card or account info bosses banking info HA!) (HA!)

  But seriously some help, thoughts, ideas or directions to another post with response, would be greatly appreciated.

  THANKS FOR ANY HELP!

  Hello

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause of your problem.

  If it helps, try the methods and check them off below.

  Method 1

  As you mentioned in your message that your PC is slowing down or freezing then you can automatically diagnose and repair problems that slow down your computer by running the fixit provided in the link below.

  http://go.Microsoft.com/?linkid=9740820

  Additional information:

  For more information you can check the link below:

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  http://support.Microsoft.com/kb/2681286

  Method 2

  If the problem persists I suggest you to try the different steps in the following Microsoft article and check if this may help. You can skip the steps that you have already tried.

  Optimize Windows performance

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Running Microsoft Safety Scanner: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  Kind regards.

• After Effects using only 1% of the RAM

  Dear Adobe,

  My after effects uses only 1% of my ram 32 GB can I know how to increase this, I allocated 8 GB for other application

  Why my application showing.

  Please inform as soon as possible.

  Kind regards

  Knani

  

  

  Perhaps because it doesn't do anything?   When he starts using 32gigs of RAM to display the 'about' dialog that is at this time, you should start to worry.

• Hello! I have a 32-bit version of Windows 7 and I subscribed plan creative mgoe (CC 2015 Photoshop and Lightroom). Unfortunately when I try to use photoshop there is a ram (out of memory) error. I have a 8 giga of ram, and I have already raised the ph ran

  Hello! I have a 32-bit version of Windows 7 and I subscribed plan creative mgoe (CC 2015 Photoshop and Lightroom). Unfortunately when I try to use photoshop there is a ram (out of memory) error. I have a 8 giga of ram, and I have already raised the photoshop preference range.

  It seems that the installation of a 32-bit version of Windows is your mistake. This limits each app to not more than 2-3 gigabytes, no matter how much RAM you install.

• SpeedGrade CC 2014.2 build 8.2x51 reading smoothing / jerky 4K with GPU R9 295 x 2 - it uses only 2 GB of RAM (8.1 Windows 64-bit), Mac OS - same problem

  Hello, guys

  I have following configuration:

  I7-5960 x 4.3 GHz

  32 GB DDR4 RAM

  ATI 295 x 2 8 GB (Gpusniffer.exe watch 3072 MB on each unit of Hawaii)

  Samsung XP941 Ultra M.2 (> 1000 Mb/s)

  Some 850 Pro SSD for H.264 4 k source

  Latest version of Speedgrade CC 16/02/2015 (DUAL MONITOR SETUP - 2560 x 1440 for Interface and 4096 x 2160 for previewing)

  I work with a lot of short 10-15 seconds 4 K 4096 x 2160 24 fps H.264 clips of Panasonic GH4. Import their first CC as some stabilization warp, cut them, save the project and opened in Speedgrade CC all are fantastic smooth in first CC.

  Speedgrade - a simple color - exhibition, some keyframes and simple scoring correction for certain substances. I use the GPU acceleration for sure have lots of 4096 x 2160 4K 24 fps. But it is not flexible and smooth after that a correction is applied. Everything is jerky and freezes the first seconds, when I press 'PLAY'. I used resources, the Manager monitor tasks (Winodws 8.1 64-bit) and Afterburner. And there's what I discovered:

  • Afterburner shows the use of mono-GPU (as we know it for playback only 1 GPU used) the same amount as in first. SpeedGrade CC use 2, 5 GB of VRAM. Also, if I use one zero effect - accelerating gpu, like "transform", for example, imported first, I get "not enough GPU resources" message in Speedgrade. Afterburner shows, CC Speedgrade tried to use more, and then Max 3GB available VRAM during that time. So I turn off these effects, before you open a project in Speedgrade.
  • CPU is low (15%) use, perhaps a little lower, then in the first CC
  • Disc - 3-10%, H.264 is weak on this subject
  • RAM! -is the problem. I have been authorized to use the 29 GB of RAM for Adobe apps. Speedgrade CC use no more then 2-3 GB according to the the Task Manager (for most 2 GB) and 8.1 Windows resource monitor 64-bit Pro. After I finished with the color correction, a project open in first DC, work with lumteri on smooth and! First CC use 9 to 10 GB of RAM to play the same music video in full resolution smoothly!

  
  

  I already reinstalled everything, including drivers for the GPU, 8.1 for Windows and Adobe CC even result.

  MacBook Pro 15 retina end 2013 with i7-4960HQ/16 GB of RAM/Geforce 750 m UPDATE!

  Under Mac Os Yosemite 10.10.2 - same situation here. First CC use 5 GB (of 11 GB of available) 4096 x 2160 Prores 422 HQ and is usable, smooth with a few drops of frame.

  SpeedGrade CC uses 2.5 GB RAM of 4096 x 2160 and it is impossible to use plenty of 4096 x 2160. Only 1/2 resolution of overview is smooth and usable on the screen of the laptop. 4096 x 2160 externally connected through Thunderbolt monitor, it's a lot rougher, I think it's hard for 750 m with 2 GB of VRAM.

  UPDATE! Previous version (CC 2014) of first CC and CC Speedgrade Windows 8.1 64-bit - even situation.

  
  

  What do you think?

  
  

  My opinion - Speedgrade CC is not optimized for 4K resolution. First CC is good for 4K.

  BTW, for more information, latest AMD catalyst driver 14.12 omega has a problem with my R9 295 x 2 and engine reading Mercury (MPE) OpenCL - just black with sound screen, when I turn on the GPU acceleration. So I use the previous version of 14.9. With 14.12 GPUsniffer.exe found a device with 4 GB of VRAM GPU and a GPU with 3 GB of VRAM (normally obligatorily 3 + 3 GB 295 x 2 Dual GPU radeon chip).

  Yes

  So, finally, Speedgrade CC works 95% smooth time with 4096 * 2160 H.264. But it was necessary to turn off all effects in first Pro CC. Nothing new. I found a few discussions on this fact, but after that I spent some time with experiences.

  Stabilizer Warp even alone is enough to make Speedgrade CC really agitated. 'Transform' effect simply blocks Speedgrade CC with "GPU resources.

  Each effect uses some VRAM (for Warp stabilizer 200-300 MB). After you have disabled all effects had load VRAM under/near 2 GB for the little clip 4096 * 2160.

  First CC flies simply with unique x 290 or 295 x 2 (which is the only x 290 during playback). Even 3GB VRAM available software Adobe CC.

  PS Macbook Pro retina 15 "with Geforce 750 M 2 GB VRAM would work smoothly with Prores to half a preview/playback resolution - 2048 * 1080. CC CC SpeedGrade or Premiere Pro with 1/2.

• HP Pavilion DV6000 recognizing only 512 MB of Ram 1 GB

  Hi, Ive had my laptop DV6000 for about 4 or 5 years now. I thought about buying a 2 x 1 GB ram sticks to increase the ram. In the system information, he tells me I have 512 MB of ram, but when I unscrew the laptop I see that I have 2 sticks of 512 MB. The laptop came with Windows XP Media Center edition and went to vista and now windows 7 Edition home premium. Any help is appreciated!

  You can try to re-seating the RAM and see if the system captures the change, or exchanging sticks in memory across banks to see if one of the sticks is bad or if it is one of the banks.

• Photoshop does not use the value amount of ram. Stuck at 6 GB

  Hey guys, recently started having issues with photoshop do not receive the fixed amount of ram needed. I have it set to use 24 GB of Ram (I have 32 GB) tried a reset, tried to reset back to the factory, then put it back, nothing. The strange thing is that if I put it to use only 1 GB of ram, it is still idling to 6 GB. Advice on how to approach this would be greatly appreciated I during the execution of projects that require a lot of attention.

  Thank you.

  Mac or Win?

  If you give complete and detailed information on your configuration and the matter in dispute, such as your platform (Mac or Win), exact versions of your operating system, Photoshop and bridge, specification of the machine, what troubleshooting steps you have taken so far, what you receive error messages if problems with opening files raw as the exact camera brand and model that generated the , etc, someone may be able to help.

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• Equium L20-197: to upgrade RAM and CPU

  Hello
  I recently bought a l20 - 197 and if im happy of all, what I want to do is upgrade the ram and processor. Ive found a supplier for ram (www.crucial.com), even if I need some details on the processor that it taken and if it can actually be upgraded.
  Thank you!

  Hello

  Before I try to give you some info on the upgrade, I want to just comment on your ad. Satellite L20 is actually a unit of budget and doesn t expensive. Now, you want to invest enough money in the hardware upgrade. It's not really illogical. Why you didn t get more information and bought the best unit as Satellite M40 or same M70. For a 300 or 400 dollars more, you can have a superior unit.

  Sorry, but the best idea is to sell your one and buy another unit. This is my honest opinion on this subject.

  Now something about your questions: essentially upgrading the CPU is not possible due to the permanent connection method. The processors used in laptops are connected to the motherboard using a process called TCP (tape carrier package).

  RAM upgrade is possible and meaningful. Your device has 512 MB of Ram in one slot and unit can handle with 2 GB max.

  Good bye

• Equium L20 - confusion of the RAM

  OK here is my problem
  I had a satilite a30 which I brought two chips of RAM (kingston ktt3311/512 x 2)
  life was good, I loved my laptop 3 GHz 1gig RAM use a radeon 9000 card, then disaster black pixels bit apeared on my screen, my screen was dying! I got to the store I brought, and they it traded against an equium l20-197 now 256megs 1.4 ghz and an ati 200 m but is not the problem im show you the situation and the model numbers you proberly need

  now my problem so that the shop I would keep the ram that I had brought the other laptop but I cannot hold in? the small slot in the base of the ram is of 1 mm on someone can tell me
  (a) is this ddr2 ram?
  (b) where the United Kingdom, or on a site Web that ship to the United Kingdom to buy new ram to do this laptop?

  Thanks to the guys in advance

  Hello

  (A) Equium L20 supports these modules of memory:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)

  (B) please contact the ASP at the United Kingdom and it can control the memory modules for you.

  Good bye

• Equium L20 - 198 expand the RAM

  Equium L20 daughter - 198 has the factory supplied 512 MB RAM installed 2rx16 PC2. I want to expand the memory to see if it improves performance with programs like MSN which seem to be grinding to a halt and freeze enough frequently. After looking on the Toshiba site for compatible memory, I couldn't find - is there any compatible RAM available? If so who?

  Thank you

  Hello

  Your laptop can handle with 2 GB of RAM max.
  If you want to add 512 MB RAM compatible a part PA3412U - 1 M 51 number module. With 1 GB of RAM of your Satellite will work perfectly.

  You want to use more than 1 GB of RAM?