Is not my CF 7.02 admin "packaging and deployment > ColdFusion Archives (.car)" menu item

Similar Questions

• I can not using F8 safe mode, so I can not get access to my admin account and therefore cannot uninstall my program

  original title: administrator, f8 safe mode access

  My computer problem begins with not being about to uninstall a program. I need administrator permissions. I am the administrator with a password. I'm not invited to give a. Nothng happens when I press a button with a shield on it. I received another message that tells me "unable to open the access control editor: the system cannot find the specified file. I found the instructions online to restart the computer (by pressing the F8 key) in safe mode. Once in safe mode I can essentially take possession of the C drive and reset admin ACCT. in SUMMARY, I can't have with using F8 safe mode (I tried once bagillion) so I can not get access to my admin account and therefore cannot uninstall my program. Can anyone help?

  I don't know anything about "reset admin account" but here are two things that may help the case to start in safe mode.  First, enter the mode safe mode with f8 key is a matter of time.  On my computer (Dell) during the boot process, I'm going to get a screen send me options of start of f2 and f12, which is to enter the BIOS.  I can start hitting key f8 then but you will in safe mode unless I'm hit immediately after that the screen with f2 & f12 choices goes.  I just hit several times for a few moments at this time.

  If this does not work for you, here's another possibility: http://www.howtogeek.com/howto/windows-vista/force-windows-to-boot-into-safe-mode-without-using-the-f8-key/

• CF 8 Admin Packaging & amp; Deployment

  Should packaging and deployment be down? I see it on another version 8.0.1. Why have we not packaging and deployment?

  Packaging & deployment shouldn't be down? I see it on another version 8.0.1. Why have we not packaging & deployment?

• [SOLVED] Problems of packaging and deploying an application in an external WLS ADF

  Hello.

  I use JDeveloper 11.1.1.7.0, who has a WebLogic Server embedded 10.3.5.

  When I test my application by right clicking on my page and run... in WLS on-board, everything works perfectly.

  It works with any page and any flow.

  Now, I have to deploy the same application to an external 10.3.6 WLS

  First of all, I have the application package in one EAR to aid Assistant JDeveloper. I did right click in application-> Deploy-> MyApplication...-> select deploy ear...

  
  

  Then, when .ear file is built, I run startWebLogic (I have already created a domain with the ADF operating options) and deploy the .ear as an app.

  I have a lot of warnings, but the final message is deployment is ok.

  It is therefore my surprise that I get a NullPointerException in the first page I test in the first access to an ADF/view iterator in the Java class:

  DCIteratorBinding iter = ADFUtils.findIterator("BusinessDataView1Iterator");
  ViewObject vo = iter.getViewObject(); -- iter is null
  
  
  

  This had worked many times in embedded 10.3.5 WLS.

  10.3.6 WLS console output is:

  19-feb-2014 15:04:26 oracle.adfinternal.controller.metadata.MetadataServiceImpl$Bootstrap logActivityWarnings
  WARNING: ADFc: /WEB-INF/adfc-config-reportes.xml:
  ...
  ...
  
  ...
  ...
  ADVERTENCIA: ADFc: /WEB-INF/adfc-config.xml:
  19-feb-2014 15:04:26 oracle.adfinternal.controller.metadata.MetadataServiceImpl$Bootstrap logBeanWarnings
  ADVERTENCIA: ADFc: Se ha detectado una definicion de bean gestionado duplicada para 'backing_views_administracion_inicio'.
  ...
  ...
  
  ...
  ...
  19-feb-2014 15:04:30 oracle.adfinternal.controller.util.WebAppConfigFactory createConfig
  INFO: ADFc: Se estß utilizando la vista '<null-value>' como la pßgina inicial de la aplicaci¾n.
  19-feb-2014 15:04:32 oracle.adf.share.jndi.ReferenceStoreHelper getReferencesMapEx
  ADVERTENCIA: Incomplete connection reference object for connection:MY_DB_JDBC
  19-feb-2014 15:04:47 oracle.adfinternal.controller.application.AdfcExceptionHandler handleException
  GRAVE: ADFc: al manejar una excepci¾n, el manejador de excepciones de la aplicaci¾n ha devuelto una nueva excepci¾n.
  java.lang.NullPointerException
          at com.mypackage.Gestion.<init>(Gestion.java:37)
  
  
  
  

  Between the sections of points, there are similar warnings.

  I checked the .ear files (contains a .war), decompression it (the .war too) to a different folder and look for duplicates in text in any file and adfc - config.xml does exist only once in the .ear

  How can I solve this? Someone have had similar problems during deployment in an external WLS?

  Any help is very much appreciated, because this is so stuck to me, and it is urgent too.

  I thank in advance. Concerning

  Well, I finally solved my problem.

  The steps are:

  • Configure WL 10.3.6 as a WLS incorporated in JDeveloper.
  • Configure WLS Diagnostics: http://jdeveloperfaq.blogspot.com.es/2009/12/faq-7-how-to-configure-adf-diagnostics.html
  • Run applications in WLS 10.3.6. Now, there are a lot of newspapers, and I see the problem in the DataBindings file. AppModule connection name and reference data binding to this AppModule were mismatch. FIX: http://www.emmersonmiranda.net/2011/07/jbo-33005-configuration-appmodulelocal.html
  • Then, a Classic JNDI fail. It is very important the name of data source JDBC with certain agreements with the login name. See this: http://mrk-group.blogspot.com.es/2011/11/unable-to-lookup-data-source-at-context.html

  Finally, it works.

  Now, let me ask another question.

  I have change the DB connection (not the name, is not posible) to another user in the same DB schema. I want to check if the application still works and it does. But why? My test is right?

  Thanks Timo. Concerning

• My HP Photosmart C4100Series printer will not remove a previously requested printing package, and is now stop printing of other things. How to rectify it please?

  I was printing a document from page 52, and then discovered that I was not necessary. After printing, the printer will not remove the print request, therefore it prevents me to print other documents. How can I correct this?
  I turned off the printer, but nothing helped.

  Thank you for your help. Very useful, but I had already found the doctor of scan HP printer on the internet and it was so simple to use and also corrected the fault in a few seconds.

  However, once more, I thank very you much.

• Packaging and deploying my Application

  I have my application (MyApplication.jad, MyApplication.cod).  Cod is large enough and has 3 cod brother.  The application deploys perfectly OTA using the .jad file.

  Fast forward to a few weeks, I've added a new "helper API' (pot of part 3) for MyApplication, called, let say, MyApplicationHelper.jar.  I can refer to this pot in fine Eclipse by adding it to the road to build.  When I create a separate library for this pot project in Eclipse and run this thru preverify and Cap pot, it produces a .jad file and a file with 1 sibling .cod.

  How can I associate this cod 'library' with the cod of the application.  I ran updatejad.exe and apparently not combine anything.

  What is the concept here? Is Cap 'import' attribute expected to combine the .jar in the main cod-dependent?

  False alarm, I got it to work.  The updatejad.exe used the flag - q, resulting in the loss of the error messages. I disabled that flag and it was a mistake to locate the cod files.

• Updates Windows gave me the version of Firefox which does not allow me to have the text and the icon in the menu bar, lost my AutoFill. How to bring back old version?

  Windows updates this morning gave me a different firefox: Customize has fewer choices. No text and icon, what I want. In addition, this new version has dropped my AutoFill.

  You can watch the classic extension theme restaurateur restore some features that has been lost with the arrival of the Australis style in Firefox 29.

  • Restorer of classic theme: https://addons.mozilla.org/firefox/addon/classicthemerestorer/
  • https://support.Mozilla.org/KB/how-to-make-new-Firefox-look-like-old-Firefox
  • https://support.Mozilla.org/KB/common-questions-after-updating-to-new-Firefox

• Packaging and deployment of Application Web merger

  Hello
  I created a web application of Fusion that has projects and model-ViewController.
  I created a profile like below for each project deployment.
  (1) model - which creates a "ADF library Jar file.
  (2) ViewController - that creates a file of 'war '.
  
  I see that, during the WAR, ViewController file contains model projects - the ViewObjects and the objects of entity classes.
  
  So to deploy my Applications Web is file WAR of ViewController is enough or should I create a file EAR, which has both #1 and #2
  
  Thank you
  Ajay

  You can of course do in JDev. Select Application-> "Application Properties" menu, in the dialog box select the deployment and set a new EAR deployment profile. It is quite easy to follow the instructions in the dialog box and you are done.

  Timo

• When clicked on a menu item is still done scroll to this part of the page but not properly noted in the menu more

  Today I opened my site in Muse to do some small updates and my head was completely broken, I have a header menu that uses the anchor points, and when clicked on a menu item is still made this part of the page-scroll but not correctly highlights the menu more.

  I also had a slideshow put in place to change each px 1100 scrolls, but who has stopped working completely.

  How did this happen without changing me anything? or I could go back to an old backup?

  It turns out all I had to do was reboot all and everything was fine, the program must just acted buggy

• Hi, I have Internet data in my package and I just switched to iPhone 5 4 s, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Hi, I have Internet data in my package and I just switch to an iPhone a 4S 5, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Contact your carrier and make sure that your account is configured correctly. Then go to settings/general/to comments and press the network name; This will cause the exceptional carrier updates to install (you will see a dialog box saying if an update is needed). In addition, go to settings/general/reset - Reset network settings if none of these fix. You will lose the WiFi passwords, but nothing else.

• I'm on the admin account, but can not change PW for another admin.

  Hello

  I'm on the administrator account for the network that I am. One of the other admins left and does not leave his password. When I go to users and try to change his password (it has the files and settings, we need) to get access to his account, the option is not there to change the password (it is grayed out). How to change its password and/or the newspaper on his account?

  Thank you very much

  Hello

  If you are the Admin and you can do what is necessary for the network, get rid of his account.

  Otherwise, questions like these are much better handled in the IT Pro Forums on TechNet.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• computer inheirerted of father and you want to restore the factory installed vista system but do not know the password of admin fathers

  computer inheirerted of father and you want to restore the factory installed vista system but do not know the password of admin fathers

  Hello

  You should not have a password to reinstall Vista.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Service user profile Service could not be loaded for the Admin

  I'm trying to connect to the admin acct and when I type the password in the next thing that happens, is that the service of showing message for this profile user profile Service cannot be loaded. so, how to solve this problem and is there another admin Act to connect through ~

  jlcg

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• [Training] The package and the launch does not work

  I try to use the "Package and launch" option in the drive and doesn't seem to work.

  I've specified that correcting the IP and the password as the playbook in the settings. I get the message "Build successful" but the Simulator does not launch the app. He remains in the home screen.

  REF: I checked and the Simulator is sensitive.

  Thank you.

  Reset the Simulator toured (took a few resets for me).

• Questions CHAPTER: classname does not exist in the current application package

  CHAP, I integrated it into my application.  When you put a file in my media with the specific file extension (.xyz) map and by clicking on it, my application successfully is started and managed as expected.  That's the good news.

  However, I tried to create a separate application to test the app-to-app content handling (so that other applications can call my request).  In the application, I create my file (extension .xyz) on the handset and then try to claim it.  However, when I try and call it, I get an IllegalArgumentException saying: classname does nto exist in the package of the current application.  I checked that my main application has seen that full classname with package (com.test.ui.MainApp) and that my separate application tries to make the invocation with this same classname.  He worked successfully on the BlackBerry Simulator (4.6 Simulator "BOLD"), but it throws the error above on my actual handset ("BOLD", 4.6.0.167)

  Anyone have an idea what could cause this problem?

  Please refer to the following.

  Support - Classname does not exist in the current application package
  Article number: DB-00751

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800429/support...