is problem with safari even after updated iOS 9.3.1.

Similar Questions

• Urgent: need help on problems on the iPhone after updating iOS 10 6s

  Hey there! It's my third post about the problems Ive been face on my devices after 10 updated iOS. Initially, after that I've updated, the music app was not running on my phone-all I could see was an empty screen and the APP crashed and I was redirected to the homepage in a few seconds. Tired to restart the phone, deleting and then adding the app back, nothing worked. Not at all. So I tried to restore my phone, save all content via icloud. Followed all the steps and after the restoration of the aircraft of other problems surfaced, BUT the music app still does not work.

  Now, not only the app does not work, I can no longer sync my iPhone with iTunes. Whenever I try, I get the following errors:

  (1) itunes cannot sync the iPhone connection has been reset

  (2) iTunes sync session could start.

  IF PLEASE NOTE, BEFOR RESTORE IPHONE I COULD ALWAYS SYNCHRONIZE WITH ITUNES EVEN AFTER IOS UPDATE 10 AND TRANSFER THE MUSIC ETC, BUT JUST COULDN'T NOT OPEN MUSIC APP TO PHONE-NOW I CAN'T DO EITHER!

  I have tried pretty much everything, restart both phone & iTunes, reset the network settings on my iphone, reset itunes sync history, by removing the lockdown folder, running iTunes as administrator on my PC, change my USB in corduroy, update iTunes, reinstall iTunes on PC-nothing seems to work AT ALL. And it's extremely frustrating. I can sync music/documents on my iPad after update of the device and the restaurant then (iPad also has major problems) and then play the music on it but just isn't my phone can be synchronized. It is a function important and if I can't synchronize my device is a sitting duck.

  The new update of iOS also gave my massive lag of phone. Screen freezes, apps for time-consuming, HDR photos take longer to be broken. It is just too heavy to wear.

  CCAN anyone help me please with my iTunes sync + music matters app... I really regret updating to the new iOS. Please help me.

  Thank you.

  PS apologies for this long post, I had to write everything I tried.

  If you are on Windows, uninstall iTunes, uninstall Apple Mobile Device Support. Once both are uninstalled, reinstall itunes, see if it syncs with itunes then.

• Can not listen using bluetooth headphones with music Apple after updating iOS 10

  I've updated my iPad to iOS 10 Air yesterday. This morning, I plugged my bluetooth headset and tried the Apple music (specifically, the NPR radio station). It sends output to the speakers of the iPad and not the bluetooth headset, and after several attempts does not connect to the bluetooth headset. I checked the bluetooth connection and verified that I could hear Siri through headphones. But Apple music seems not to want to use bluetooth headphones, whatever it is I'm looking for.

  Any suggestions or help would be greatly appreciated.

  Hi the edema,

  It is my understanding that you are experiencing some problems with Apple's music stations on your iPad don't play no not by your Air Bluetooth headset. I listen to music Apple all the time and I know it's nice to be able to listen to the radio stations with headphones. I will do my best to help you.

  As you have noted that you can hear Siri through Bluetooth speakers, you can also try a different like YouTube app to see if you can hear the audio from there through your headphones? In addition, if you do not already made, conclusion of the music app and reopen it and try to play the station again. This happens just this specific station or any station you are listening to?

  Even if you did the following steps part of this article, to get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device, there are a couple of additional ones that can help.

  1. Make sure that your device iOS and Bluetooth Accessory are close together.
  2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
  3. Restart your Bluetooth accessory.
  4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
  5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPhone, iPad or iPod touch.
  6. Cancel pairing the Bluetooth accessory, replace the accessory in discovery mode, then the pair and plug it in again.

  Thanks for stopping by Apple Support communities. See you soon.

• Need help to solve problems on iPad Air2 after updating iOS 10

  Hey guys this is my second post in the forums of the iPad on the same issues - have not been able to sort them yet Dazs.

  (1) my iPad can't Touch ID even after the restoration of the aircraft there was "failure to put in place Touch ID error" and whenever I turn on the Tablet I get a notification that says: «cannot activate Touch ID on iPad»

  When I go to settings to set a new mark I simply get an NDR regardless of switching Touch ID access power (iTunes/App store + phone unlock) as support interviews suggest.

  2) there is a general delay in the camera, the on/standby button does not respond as it used to, and especially when I turn on the iPad must be 2min30secs to get switched on - I timed it actually! Before the update simply took 15 seconds, my old laptop powers on more quickly than my iPad now!

  I restored my iPad, and while all the other functions work with delay however, but these two big things are bugs me a lot. They are not resolved after the restore the device.

  How to solve these problems please help!

  Here is the error I get when I try to configure the contact ID.

  

  This is the error that I get whenever I turn on the unit.

  

  And iPad takes so long in power! Record the time more myself!

  

• I have a problem with safari 2 air ipad iOS 9.3

  I can´t enter the pages in safari, chrome, etc.

  I chose a page but when I tried to open it nothing happens

  The only way to enter a page's Favorites or by writing for example www.apple.com; But if I write apple in google and then try to open it nothing happens.

  I tried to charge the ipad, but the problem still happens
  

  I met the same problem. It is very annoying as the phenomenon makes navigation nearly impossible. Does anyone know if the technical staff of Apple is aware of this and make measures to repair? It's my first time to experience such a problem with IOS so please forgive my lack of knowledge.

• ThinkPad X 230 Windows 7-64: problems with the screen after updates

  Hi all

  I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.

  How to solve the problem, do anyone know?

  Thank you!

  Isosik

  Hi Isosik,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.

  If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.

  You can also manually download the drivers from the Lenovo support site.

  Lenovo support site.

  I hope this helps.

  Best regards

  Agnes Kumar

• I have problems with my games after update my iPad 2 to 9.3.2,and can anyone help?

  IS that what someone has problem with updated their 9.3.2 at ipad2?

  Yes.

• Problem with the gallery after update 2.3 music

  Hello

  Recently updated my XperiaX10i (French version, not operator sim locked). No problem with the update itself and the phone seems to work fine.

  But, the music gallery has first not detected music files already in the sd card 32 GB (no problem for photos, videos or other files), and does not so load in the library. I had to download them all again through Media Go and now the library shows them, but album covers are not more in the album list as in version 2.1, which was very convenient for the selection, however the sleeves appear in the background during playback of a track: this looks more like a bug than anything else.

  I am also missing the first Quick Launch bar application for Wifi, Bluetooth, GPS, sync and the brightness of the screen, it seems that the launch of all these features to go into the settings file now.

  In conclusion, I hardly see what exactly improved on this phone since version 2.1. except maybe the speed and the quality of the screen display.

  Update from 1.6 to 2.1 was a total revolution in comparison.

  Power control widget is always there

  

• IPhone 6 screen freezes even after updating iOS 9.2

  I read all the posts on the thread "iPhone 6 freezes after iOS 9 update" and tried ALL the options mentioned in the thread, including taking the phone to the iPhone "geniuses" (ha! What gumption) and after 3 months of running around they gave me, the problem still remains. It's December 28 and I first started noticing symptoms appox when iOS 9 was released in late September.

  Apple won't admit they should be Recalling all these phones, but it's the right thing to do. My 1 year warranty expired in November and now I'm SOL.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Problem with the resolution after update

  After the update, I have a huge resolution problem (this happens only with the PS, not with DW)

  I attach a screenshot

  It's something that's never happened before, must be commensurate with the new version. How can I get that back to 'normal '?

  Normal, which means that this

  

  Hi antoniod19097390,

  Greetings.

  • Please try to change the settings in the option of the PS interface

  -Screenshot check

  

  • Click ok and restart PS and then check again.

  Concerning

  Rohit

• Problem with Audio drivers after updating through the solution Center

  I left the Lenovo Solution Center perform an update on my system, and now I get two error each time Windows starts upward.

  FIRST ERROR: "command line of TOMY Application has stopped working".

  I give myself two arrows to click:

  "Check online for a solution and close the program" (does nothing)

  -"Close the program".

  "Display the details of the issue" reveals:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: SACmd64.exe
  Application version: 11.0.0.0
  Application timestamp: 4ee94e0a
  Fault Module name: SACmd64.exe
  Fault Module Version: 11.0.0.0
  Timestamp of Module error: 4ee94e0a
  Exception code: 40000015
  Exception offset: 0000000000150225
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: e357
  More information 2: e357a1a1b0010a7001c2e1562bb09767
  3 more information: 7d1f
  Additional information 4: 7d1fe5f93672c47a0d347598ff39d707

  SECOND MISTAKE: "Dolby Advanced Audio.

  The current version of the Dolby audio driver is 7.2.8000.13 and the software application expects that the version of the driver 7.2.7000.11. Please install a valid application of driver and software combination.

  The only option here is to click an OK button.

  These errors did not appear until I left the Lenovo Solution Center perform a software update.  I would have thought that the built in Lenovo program would update the correct drivers and software applications.

  Can what steps I take to solve these two error messages?

  Lenovo Thinkpad Edge E430

  TYPE 3254-CTO

  Windows 7 Home Premium 64-bit

  Core i7-3612-QM CPU @ 2.10 GHz

  Kit of memory 16GB DDR3 1600 MHz Corsair Vengeance SDRAM (CMSX16GX3M2A1600C10)

  I source and solved my problem.

  Follow the link:

  http://forums.Lenovo.com/T5/ThinkPad-edge-S-series/E430-Dolby-advanced-audio-issue/TD-p/826333

  I found that the instructions given by a member was more useful.

  First go to;

  Start > Control Panel > hardware and sound > Device Manager >

  Then go down to "sound, video and game controllers".

  Then 'right click' on the 'Conexant 20671 HD' and on the left, click on uninstall.

  Wait for the uninstall process to finish and then restart your computer.

  Wait a few minutes after the start to the top and Windows should automatically re - install the driver, that invites you to a message in the lower corner box right saying: "driver installed successfully', with the name of the driver below. (Mine was the same driver "20671 HD"

  Bingo, problem solved.

  If this does not work for you, there are other solutions and/or forum members/staff that can help.

  Hope this helps,

  Rexe

• Tecra S1 - problems with the touchpad after update BIOS to 2.50

  Hello
  After the BIOS-update to version 2.5, the touchpad does nothing. From the docking station, the l' option option mouse PS2 works without any problem. Starting late, the touchpad no longer works. Normally - before the update - the touchpad began its work immediately after starting not rooted.
  What can I do to reactivate the touchpad?
  Juvenay clevain

  Hello

  Are you sure that your touchpad was not disabled?

  I mean the FN + F9 key combination to activate and disable the touchpad.

  This is why you should check this first.

  On the other hand a 3rd mouse driver part could affect the functionality of touchpad too.

  In my opinion, you should try to reinstall the driver for the touchpad and test it without connected part 3 mouse.

  Good luck

• I have a problem with my keyboard after the update using drivercanner

  Original title: my keyboard stopped working after the last updae

  OTEVA here

  Hi I have a problem with my keyboard after update using drivercanner I need help fixing this cause I tried looking for the installation of the upate that cause, but I don't have where to look.

  try a system restore to a date preceding the update.

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• Problem with Safari after the last update

  RE: Security update 2016-001

  Version of Safari 9.03 update

  Version of Yosemite 10.10.5

  Friday, I installed the latest update from security 2016-001. Since then, Safari is almost unusable.  Unable to connect to Pandora, unable to connect to my paying investment sites.  iTunes radio is very slow and almost no functioning.   Is anyone else having the same problem?

  I would appreciate help in resolving this issue.

  Thank you

  Phillip

  I was having the same problem and read a solution for this problem here: no internet after update of 2016-001

  If you have ESET cybersecurity or Pro is installed, uninstall and reinstall. Make sure that you have the newest version dmg before you start. The instructions in this thread, that I linked will not uninstall ESET. Uninstall using the uninstall tool. Shut down your computer. Restart and reinstall using the installation tool. It fixed for me. I had 2 days of the internet unusable for half of the sites I tried to visit. Even this site took 5 minutes to load. Either slow or no load on Safari and FF. Everything goes well today, although I've submitted a ticket with the people of Eset, they are working on a fix.