Is Q5582A device install a prerequisite to D7260 driver install?

Hello.
I have a Photosmart D7260. It is shared by two computers on a local network, they all two Vista 64-bit. I recently added the Q5582A duplex unit.
I followed the instructions of the closed station ' Vista / Win 7 Duplex Printing Troubleshooting Guide "and I get this error:

"The document has been configured to print using the print module automatic two faces but the.
module is not installed in the device. The document will be printed face. »

The duplex unit must be installed at the time the drivers are loaded for the print face Module two to load?

Thank you

Solved!

The message:

"The document has been configured to print by using the two-sided printing Module, but module is not installed in the device. The document will be printed face. »

It has constantly harassed me. The electric contact on the device is a bridge single spring that completes a circuit on the printer. The contact of the printer is two conductive strips on a phenolic Board. The bridge of the device is horseshoe-shaped. I had already inspected the two contacts and saw nothing wrong. Yet the message led me to believe that the printer doesn't 'see' the device. After the reinstallation of the unit, I held the printer with one hand and pulled on the device firmly on both sides. It was not very different from what I had done before. I had already heard the latches snap into place. And I thought I had an electrical contact. I printed a short document and did not get any message. Then I printed a two-page and the duplexer work! The Conclusion, the printer now "sees" the duplexer.

Frank C

Tags: HP Printers

Similar Questions

  • No audio device installed Satellite L300-28R (PSLB8E-12T018GR)

    Hello

    My English isn't the best, unfortunately. Maybe someone can help me.

    The following problem:

    A Satellite L300 ran without problems until now with windows 7 (32 bit). I had then increased PC speakers of this came of trust with a USB flash drive that will serve as an audio interface for mailboxes. He has been infected by the first recognized by Win7, installed, and I could use Ihne. But then the sound card integrated (Realtek HD Audio) is disabled. Now, when I remove the USB audio interface I have no more sound. There is a lack of complete the "Realtek HD Audio" entry in the audio control.

    In the Device Manager is not an entry ' Audio, video and game controllers' also appear longer. The interesting thing about the HD audio driver, but he is always installed correctly. It is found but no entry for more video, audio, game controllers, and if I was in the toolbar the look of speakers just click on it a red cross when he get up "no audio output device installed."

    On this, I tried to uninstall the system USB audio drivers (no problem) has restarted. Not always the same sound problem.

    That's why I completely uninstalled all drivers audio and tried Windows 7 default drivers. The same problem. I uninstalled the audio drivers, this time I tried the drivers Toshiba, same problem.

    Fact is I can remove all the drivers, reinstall, which happens without problem and the error message, then it is same because "drivers have been installed, the machine can be used now" I click on what there is also my drine Realtek HD Audio. But then I opened the Soundsteurung he wrote me, "No audio device installed" it's almost as if the onboard sound has been disabled in the BIOS, but unfortunately there is no entry exists, since the BIOS is usually something to bend parameters.

    I have integrated sound card in my vemutung the BIOS from a USB audio interface is disabled, I would now like to 'hidden' bios unlock options and manually activate the sound again. Unfortunately, I do not know how do I unlock the BIOS.

    Is there anything else maybe ideas, suggestions or solutions? Have already the system is set up with new same problem, the drivers are installed, the device is detected and marked as ready, but not input in the audio control and no entry in the Manager of devices for "audio, video and game controllers".

    Once had a similar problem with my desktop where I could pass without any problem, but the onboard sound in the BIOS again, unfortunately, what with the Toshiba BIOS Lite is not the case.

    Hope someone can help me here, slowly I won't now, so that a new installation was not, I see the problem with the BIOS setting.

    Answers in German would be nice

    Greetings and thanks
    yunyx

    Hi mate

    To be honest I'm not quite sure what the problem might be m.
    Your ad is also a bit confusing.

    First of all, the BIOS is not similar to the BIOS that you can find on desktop PC and as far as I know there is no special option to enable or disable the sound card.

    So I think that in your case, it s BIOS not deliver.
    I think that its Windows operating system that makes some disorders who knows maybe the registry is confused up similar facts is that you should see some yellow exclamation points in device if Manager driver would be absent or you should see an unknown device in the devices list

    The latest Realtek audio driver could be downloaded directly from the Realtek page, but even if the Realtek audio driver is not installed Win7 standard driver should recognize the sound chip and sound must be detected during the operating system installation.

    I think you should try to install a driver from Realtek but if this won't help you, then you should try a new installation of the OS. Get it back you would help define the laptop back to factory settings and I think it's the fastest solution in your case

  • HELP ASAP! No audio output device installed with hp pavilion dv2500

    product name: hp pavilion dv2000

    Model number: dv2710us

    Product number: 2CE75228LJ

    Windows vista edition Home premium 32-bit

    my hp goes on to say that did not install device to output audio and theres the the image of volume with a large red circle with a white cross in it.

    that's not true because I have contexant (I think that's what it's called) installed speakers.

    Lately when I would restart my computer the sound would work intermittently, but since two days I restart my computer or not the volume with a large circle in red with a white cross image is still there and says no audio output device installed. Help, please!

    Hi, you can try the steps below to solve the problem:

    Step 1: Re-install audio drivers HP Recovery Manager.
    1. Click Start, in the start search box, type of recovery. Then click on Recovery Manager.
    2. in the Recovery Manager window that appears, click Next. Software programs Reinstall accompanying your computer screen, click on no, I'd like to see other options. And then click Next.
    3. in the screen of hardware drivers reinstall, click Yes. And then click Next. On the screen to reinstall hardware driver, click Next.
    4. in the list of drivers, select the name of the card its installed on the system. And then click Next. When you are finished, resettlement is the complete screen displays. Click Finish to restart the computer. After the computer starts, test sound. If the problem persists, perform step 2.
    Step 2: Manually reinstall audio drivers
    If there is no sound, and still get this error, update the audio driver from the link below:
    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-63129-1 & CC = US & DLC = in & LC = on & os = 2093 & Product = 3646848 & sw_lang =
    Step 3: Restart the Windows Audio Service.
    1. Click Start, type services.msc in the search field, and then select services.msc in the list as soon as it is available to open the Programs window.
    2. scroll down to select Windows Audio, do a right click to open the menu drop down and then click Start.
    3. right click on Windows Audio, click Properties and verify that the Startup Type is set to automatic.
    Reboot the laptop and check for the issue.

  • Satellite Pro L20 - no audio output device installed

    Hi, I would appreciate some help with my installation of 32 bit Vista on my Satellite Pro L20 series.

    Installation went well but my sound icon has a cross with her and when I place the mouse over it I see the message: no audio output device installed. I went in full with privilagesand Device Manager there is an exclamation following audio controller appliances. I looked at the General properties and it says: "this device is not configured correctly (code 1). I uninstalled the driver and downloaded Realtek AC97-Ref: 6285_Vista_APO_PG536 driver installed and rebooted but I still got the same error messages!

    Can someone help me? I tried uninstalling and reinstalling many times now, I don't know where to go next!

    Concerning
    Abidan

    Hello

    As a boarder, said, if you have a Conexant sound card, you should look for a Conexant audio driver.
    The Realtek driver will never work because that makes this different s.

    Check other Toshiba laptops for the same card his Conexant. Maybe you can find a Conexant Vista driver.

  • Re: Satellite a series - error message "No Audio output device" installed

    The small icon in the lower right corner that normally allows you to control the sound settings now appear with a red X next to it, and when I move the mouse over it I get the message above "No Audio output device" installed I have absolutely no idea why this happens suddenly, but I noticed a couple of weeks, and then a few days later, when I turned on the laptop, the sound was back to normal.

    Now, I have this message again-, it seems it's random... sometimes when I turn on the machine it is ok, other times I get the above message. I touch any of the settings ever as I am a non-technical person, so have no idea why this is happening suddenly. I tried simply to reboot the machine, but it does not (today).

    My machine is a portable satellite. If you ve of suggestions as to how I can just get my sound back to normal (i.e. in the background, something not not to even think to, it works just as you would expect), please posting a reply. Warranty service was going to get paid for their time. I'm sure it's a very simple solution and I would appreciate greatly any help you can give me.

    Thanks yo a lot for your time in reading this.

    -Gamelover

    Hello!

    Say please use this Satellite phone you have exactly? If you look at the Toshiba site, you can see that there are a lot of Satellite phones, A market with a different hardware configuration.

    And you are using Windows XP or Vista? If you are using XP, you must install hotfixes for devices high definition Audio:
    http://support.Microsoft.com/kb/835221
    http://support.Microsoft.com/kb/888111

    Good bye

  • Re: Satellite U300 - no audio device installed

    Rercently I lost audio and one audit result is back there is no audio devices installed. I reloaded the driver Realtek which resulted the return audio, but only for a short while - I now have no audio devices installed (accoding to the control panel). How can I do for r-installation of the audio device (assumed Realtek) and what I am doing wrong?

    > I reloaded the driver Realtek which resulted the return audio, but only for a short while - I now have no audio devices installed (accoding to the control panel). How can I do
    > on the r-installation of the audio device (supposed Realtek) and what I am doing wrong?

    Remove the audio driver, clean the registry and restart. Download a [pilot | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] if it does not it, there may be OS or hardware related issue. Then, you should to restore factory settings. If t still exists, there is a malfunction of the sound card

  • Satellite A305-S6872-no Audio output device installed

    I bought this new model Satellite A305-S6872 from Best Buy. It came with Vista OS and gives the error: No Audio output device installed. I called Toshiba tech support and was advised to use the recovery disk, since there is no driver from Toshiba Web site for audio driver. However, after the recovery, the problem remains. Help, please.

    Hello

    Is a unknown device din peripheral list manager? How it looks like there?
    For me, it is really strange to get such error after installing recovery image.

  • Pavillion dv9700 - have lost the audio. has received the message no audio output device installed.

    I Pavilion dv9700 and lost the audio.  Message is no audio output device installed.  I tried to install the driver and still no sound

    Hello

    Please find the Vista link below.

    Don't fix no sound or Audio problems in Vista

     

     

  • No audio output device installed on sucks TC-605 with Win 8.1

    I had to reinstall the drivers on my sucks TC-605 Win 8.1 running everything seems to work ok, except that I get a no audio output device installed.  I have tried everything I can think of, including the removal and reinstall all the drivers, deactivation and reactivation of the hardware in the Device Manager.  I think that perhaps there is a secret in order that the Intel Chipset drivers are installed before the Realtek audio drivers?  I've seen a lot of reports on various web sites and some that reference the Windows Audio service is restarted.  I tried ALL these "fixes" several times, but no luck!  Any help to diagnose and resolve this would be greatly appreciated.

    HDAUDIO\FUNC_01 & VEN_8086 & DEV_2807 & SUBSYS_80860101 & REV_1000

  • Error Windows Media Player cannot play the file because "it might not be a sound device installed on your computer.

    Original title: Media Player

    THE FOLLOWING IS a MESSAGE I GET WHEN TRYING TO DOWNLOAD FILES: "Windows Media Player cannot play this file because there is a problem with the audio device.  "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly.  What "audio device" are talking about?

    Hello

    1. do you get an error with this error code?

    2 have you installed multiple audio devices on your computer?

    3. what version of Media Player do you use?

    4. were you able to play the files using Media Player without any problem before?

    5 did you a recent software or changes to the material on the computer?

    Audio device is the part that allows sound from the computer. If the appliance is used or if the drivers are corrupt, then you can get the error message.

    I suggest you go through the steps and check.

    Method 1:

    Quit other programs that may be using your sound device, and then try to play the file again.

    Method 2: Install an updated driver.

    Step 1: Firstly uninstall the audio driver from Device Manager and add or remove programs

    How to change or remove a program in Windows XP

    http://support.Microsoft.com/kb/307895

    a. click Startand then click Control Panel.

    b. click Systemand click on the hardware tab, then click Device Manager.

    c. to the title sound, video and games controller, check the sound card that is listed.

    d. right click on the sound card and then click on uninstall the driver.

    Step 2: To see if an updated driver is available, use Windows Update or access the sound device manufacturer's Web site.

    Follow these steps to do the same thing:

    a. click Startand then click Control Panel.

    b. click Systemand click on the hardware tab, then click Device Manager.

    c. the title sound, the video controller and games, make sure that the sound card is listed.

    d. right click on the sound card and then click Update driver to install the latest version of the driver.

    e. visit the sound card manufacturer's Web site to determine if a newer version of the driver is available for download.

    Method 3:

    If you have multiple audio devices installed on your computer, try to use another. The selected audio device might not support Secure Audio Path (SAP).

    Additional reference on:

    Resolution of the problems of reading in the Windows Media Player for Windows XP

    http://support.Microsoft.com/kb/306317/

    Hope this helps and keep us informed if you need help.

  • No sound - get the error no active mixer device or no audio device installed

    Original title: downloads for devices sound cards/audio/active mixers
    Hello, I got my laptop crash currently and when I came back, I have no sound except for the beeps. I can't hear CDs or audio files on different Web sites. I can livestream and see a video, but not hear. I plugged headphones and have the same results. I get the error codes are no active mixer device and there may be no audio device installed. I have a windows xp operating system. I don't know where to go to start a download for sound cards.
    Thank you.

    Miloz

    We can try to install the drivers manually. It seems that every time that your device has crashed, someone reloaded Windows without having to install the device drivers.

    Let's start by trying to install the audio driver first. This one we might have to do it manually, but the others should be automatic. This gives a test:
    1. go to: http://downloads.sourceforge.net/sevenzip/7z465.exe and download the 7zip archive manager
    2 download, register, and install the utility on your computer
    3. once the utility installed, go ahead and re - download the audio driver package
    4. save the package on your desktop (or somewhere easy to access)
    5. once the package downloaded, find him, do a right click and choose "extract here...". "or something similar in nature. Basically we will extract the contents of the package and install it manually
    6. once the content is extracted, click START
    7. in the menu START, right-click on "Computer" and choose "Properties".
    8. in the upper left corner, click on Device Manager.
    9. find your Multimedia Audio Controller, right click and select 'Update Driver'... »
    10. click on "Browse my computer for driver software".
    11. click on the button 'Browse' at the top
    12. place where are the files extracted from this driver package
    13. Browse in the folder extracted and select the listed file. If there are several of those who choose an and and if it's just, the Setup will continue. If this is not the case, the installation program displays and error and then you just go back and try the alternate
    14. from there, the installer should walk you on the rest of the steps to manually install the driver package
    As far as your other drivers go, I would recommend going to the bridge site and looking for a driver of Modem for your computer model. The audio driver should be supported at this stage, and the Ethernet driver can be a joint wireless adapter you have. You may need to find a driver for it on the site of the gateway, OR if you bought the adapter you need to go to the device manufacturer's Web site and get you a driver there.
    Let us know what happens
    Thank you!

    Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • recently I formatted my pc and installed all the drivers, but my pc shows no device installed channel?

    I formatted my computer and install windows xp and I installed all the drivers, including the audio driver and it asked me to restart my pc after installing the audio driver. Later, when I tried to play the song on pc then Windows media player displays an error not saying no audio device installed... I almost tried everything but nothing is done... there no sound option in Device Manager and I'm really scared... what to do now? Help, please

    Seriously? Not really... it's just a matter of eliminating the current
    sound card and install a new one.

    If you're not a repair person computer DIY that it would be
    be the best if you take it to a professional.

    They might find that you don't need even a new sound card.

    And, the following links will give you an idea what it is:

    Windows XP - How to install a sound card
    http://www.LIUtilities.com/how-to/install-a-sound-card/

    Windows Vista - install or remove a sound card
    http://Windows.Microsoft.com/en-us/Windows-Vista/install-or-remove-a-sound-card

    Windows 7 - install or remove a sound card
    http://Windows.Microsoft.com/en-us/Windows7/install-or-remove-a-sound-card

  • Unable to play his error: error ID = 0xC00D11BA, Condition ID = 0 x 00000000 tell also no audio devices installed.

    Original title: Of error ID = 0xC00D11BA, Condition ID = 0x00000000

    I try to play a song on my computer and I get this error code saying that it cannot read the file. Also says I have no audio device installed?

    Hello

    (1) what application you use to play music?

    (2) what is the type of file you are trying to play?

    (3) that you get the default Windows Audio on your computer?

    (4) you did any hardware changes or software on the machine before the show?

    I suggest you try the steps mentioned below and check if it helps.

    Method 1: Try to download and run the Fixit tool from the link below.

    Hardware devices do not work or are not detected in Windows:
    http://support.Microsoft.com/GP/hardware_device_problems

    Method 2: No sound in Windows.

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Hope this information is useful.

  • No audio device installed in Acer Travel mate

    Acer travel mate 4060 * upgraded to 2 GB of ram and windows 7 32-bit Home premiun has just been recovered from an accident.

    I send you this message from the same computer. My speakers do not work. However when I connect an external speaker with USB connection, the sound works perfectly well. I can watch videos and listen to music. I checked and it seems that there is no audio devices installed. I urgently need help from the community that will be appreciated MUC. Thank you.

    Hello DharmaSD,

    You have a Realtek audio device.

    Have you tried to install:

    1 - the driver Acer (Vista). For compatibility with Windows 7, read the file readme.txt or file.inf

    2 - the driver Realtek(audio AC 97 or HD codecs)

  • Error - there might not be a sound device installed on your computer, it can be used by another program, or it may not work properly.

    Original title: How do I install the audio device for windos xp driver.

    Tengo una don't destop pero no works el sonido y me lo siguiente al try using el windos Media Player appears: it might not be a sound device installed on your computer, it can be used by another program, or it may not work properly.   AS PUEDO HACER PARA CORREGIR EL ERROR!

    Hello hernan.

    ·         Do you get the Windows default sound on your computer?

    ·         You did it of any hardware or software changes on the machine before the show?

    You can follow this link and check if the problem persists.

    No sound in Windows

    Hope the helps of information.

    Please post back and we do know.

Maybe you are looking for