Is set in cluster mode for a PV220s "sharing"?

Similar Questions

• Cannot set in AHCI mode for disc SSD NB300

  Hello

  I have a Toshiba NB300 netbook, running Windows 8 Pro 32 bit, very happy with it!
  I have a Corsair 3 112 GB Force SSD drive is installed, and everything seems to work fine!

  Read on the SSDS, I see that a better performance for executing the SSD in AHCI mode.
  So I went to menu configuration of startup and changed compatibility in AHCI mode.
  I actually tried a few times, always with the same result, failure!

  When the system is trying to start I get a message saying that there was a problem and that
  the system is trying to gather information.

  The only solution is to go back in the program installation and handed to the compatibility mode.

  The BIOS is up to date, and I just don't see any way to solve the problem.
  I really want to get best performance with this net book as possible.
  I have a screenshot of the details of Speccy SSD drive, but I don't see a way of fixing?

  If anyone can advise me on how to get mounted AHCI mode and go that I would be really grateful!

  Thank you

  Chris

  Unfortunately on this forum we don t have reports on the use of the DSS on NBs I have NB520 and I would use the SSD for, but so far I didn't find the right.

  As far as I know by default BIOS is set to AHCI mode. What operating system you have installed? The original that you got with your laptop or your own version? Have you installed the s Intel Storage Manager of the Toshiba download page?

• set the optimizer mode for mapping

  How can I set the the optimizer mode (for example, "all_rows") explicitly for a mapping?
  
  ~ Prabha

  Hello

  in the design center, select "configure" in the context menu of a mapping. Under operators table, select a table, and then set the indicator of extraction.

  Kind regards
  Carsten.

• set wake-up mode for office vista so vista laptop can print

  I need to position alarm mode for the vista for computer desktop vista laptop can print! Thank you!

  There's not much of a way to do this.  There are programs of "wake on lan" who can wake up a sleeping computer, but they require hard wire Ethernet connection and special software to do (that your printer is probably not the installer to do).

  Unfortunately, you will need to go slap a button to wake the computer from office before you can print. Or disable the saving of sleep.

• Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  
  IE can you define the rules of affinity DTS depending on how the rules of storage of profiles are configured for a virtual machine?

  In my mind it seems there is disconnect from the DTS and storage profiles.

  Thank you.

  = NOTE =.

  My lab at home, 2 organizes running ESXi 5.0

  Dv01 has

  Of startup vmfs 7200 RPM 160 G = dv01-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  VM02 has

  Of startup vmfs 7200 RPM 160 G = VM02-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  Vmfs 5900 RPM 2 TB = VM02-TV01

  I have (3) facility profiles of storage using 'User-defined storage Capablity' as shown below:

  (160 @ 7200 RPM SATA) boot > Boot

  Fast (160 7200 RPM SATA and 1 TB @ 7200 RPM SATA) > fast

  Slow (2 TB @ 5900 RPM SATA) > slow

  Then, I set up a storage Cluster with my local disks on dv01 (only to date)

  LocalVM disc dv01-BOOT and dv01-VMFS disk of the 'cluster of storage.

  I have a computer virtual called DC01 (HardDisk1) want to live on 'Boot' profile storage drive
  His "Non-compliant" poster according to the storage profile, it should run on drive 'boot' on dv01

  To get to this point, I put the StorageCluster in Mode of Maintenace 'DTS' and forced a sVmotion of all virtual machines off dv01-BOOT

  No disks are IO or claim of space.

  But once I take the 'DTS Maintenacne mode' STARTUP dv01 floppy is now get the DTS to return him to satisfy the storage profile (rule) I install... IE do the 'storage profile' VM complient (without doing a few externall API, the PS script or the 3rd party software calls)... ??

  Seems weird it is (or may be) such disconnection of a memory of the profiles and the StorageClusters and the DTS?

  Thank you...

  At this point, I think that storage DRS and storage profiles are two technologies to separate and work independently, but what you suggest is a great idea-

• Do not disturb mode for a few hours

  I want to be able to activate the "do not disturb" mode for a few hours (while I'm in a concert, etc.).  I know that I can turn it on manually, but then I won't forget to turn it off at the end of the concert.  (Similarly to turn off the phone.)  I was able to set a mode, but then the next day I have accidentally will be in mode-not-disturb (because I forgot to cancel the calendar).  I just want something that says: 'do not disturb for 3 hours.  Or maybe "do not disturb until I have quit the current place of residence".  Something like this exist?  (Even in an app...)

  Unfortunately no, there are no settings or applications that will be in charge. iOS is a sandbox environment. 3rd party applications can control the heart of the system.

• How can I disable limited Mode for watching Youtube videos?

  How can I disable limited Mode for watching Youtube videos?

  You need the restriction code to disable restrictions.

  UPDATED - revised to include the correct article for Mac.

  OS X El Capitan: set up parental controls

• Satellite M70-159: how to set the APM mode on the HARD drive?

  Hello.
  I have Toshiba M70-159 and I have problem with my HARD drive. My power to drive (FUJITSU MHV2060BH) down from 2 to 5 min... I put in Toshiba Power Saver "Never."
  I now read http://www.fel.fujitsu.com/support/disk/manuals/m60_product_manual.pdf and I see maybe APM I put.
  How can I configure Mode APM?

  1.11 advanced Power Management (APM)

  The hard disk automatically switches to the mode according to energy saving the
  setting the APM mode under the inactive state.
  The APM mode can be selected with a number of sector register of ALL
  Control FEATURES (EF).
  The disk complies with the three types of modes of the APM which a command
  from the host is necessary.
  EN = 05 h: enable APM
  SC = C0h - FEh: Mode-0 Active Idle? Idle low power
  SC = 80 h - BFh: Mode-1 idle assets? Low power idle (default)
  SC = 01 h - 7Fh: Mode-2 inactive assets? Low power idling? Standby
  EN = 85 h: disable APM (Game Mode-0)
  Active Idle: The head is in a position of extreme inner disc
  Middle. (VCM Lock)
  Overview of the unit
  1-14-C141-E224
  Low power Idle: the head is unloaded the disc.
  The spindle motor.
  Standby: the motor stops.
  In Mode APM-1, which is the default APM mode, operational status moves until it
  Finally reached "low power idle."
  Table 1.7 Advanced Power Management
  APM mode
  Idle assets
  (VCM Lock)
  Idle low power
  (Unloading)
  Standby
  (Spin-off)
  Mode-0 0.2 to 1.2 s min. 15 s/o
  Mode-1 0.1 to 0.2 sec 10.0 - dry 27.5 n/a
  2 mode 0, 1-0, 2 s 10.0 - dry dry 27.5 10.0 - 40, 0
  When was the maximum period during which the hard disk waiting for orders
  exceeded:
  Mode 0: Mode shifts affection Active Active Idle in 0.2 to 1.2 and low
  Inactive power in 15 minutes.
  Mode-1: Active status to Active Idle mode in 0.1 to 0.2 seconds and
  low power idle in 10.0 - 27, 5 seconds.
  Mode 2: Active status to Active Idle mode in 0.1 to 0.2 seconds and
  low power idle in 10.0 - 27, 5 seconds. After 10, 0-40, 0 seconds in
  Low power idle mode goes into sleep mode.
  Note:
  The default values for these settings are reflected in the values of WORD 91 of the
  Command IDENTIFIER. In addition, APM mode is initialized with the Mode-1
  (the default) to power off.
  The above mentioned is time until the transition to each mode of power based on the point
  that the reader becomes a State of waiting for order.

  How can I set Mode APM to disable EN = 85 h: disable the APM (Set Mode-0)

  Where do I put? Please help me.

  Hello

  You can use either the Toshiba Power Saver that controls also the APM mode or you will remove him this tool and then you will use the Windows power management.
  Here, you can change the settings for the APM mode.
  Unfortunately the other options to disable the APM Mode are not known to me.

• How to set the cluster error in postexpression?

  Hello

  I created a c language #-driver that returns a 0 for the pass or - 1 for failure in the functions 'int MyFunction().

  Now I use this function for teststeps.

  Question is: How can I use this returnvalue to set the cluster error?

  So that one - 1 causes an error.

  I think it can be done somehow in the post expression.

  How can I put a

  If (returnvalue == - 1).

  {

  Result.Error.Code = 10100

  Result.Error.Msg = "an error has occurred."

  Result.Error.Occured = True

  }

  Thanks for help

  Hi OnlyOne,

  Check out this example (stored in TS4.0)

  The tower is done using a breakets conditional and literal.

  Locals.nReturnValue is-1? {Step.Result.Error.Code = 10100, Step.Result.Error.Msg = "Error occurred", Step.Result.Error.Occurred = True}: {}

  Concerning

  Jürgen

• Shutter speed too slow AV mode for sunrise timelapse (low light)

  Hi all!

  First, I'm a bit embarressed to ask this question because I am sure that its entry level but stuff I posted in several other forums to establish what is the problem im trying and I now reduced to a simple question... I think so..

  I'm trying to shoot a timelapse of the sunrise. At dawn when the unit is in AV mode, due to the low light it seems be frezzing up when I go to take a picture. I realize now its not freeze until his tusing simply a shutter speed to compensate for the lack of light.

  The problem is, I see a lot of tutorials of timelapse of Sunrise, and they all recommend using AV mode because of the changing light conditions.  (I had to use manual mode with a small opening in the end and to halfway through once the Sun rose my photos were all horribly over exposed)

  How can I combat the problem of low light in order to use my camera in AV mode for photos with 4 second intervals?

  At the moment I can't use it at dawn because the shutter speed slows down so that it does not make a timelapse.

  Any comments would be massivly appriecated.

  Thank you!

  OK, let's go.

  AV and Tv are really semi-manuel exposure modes.  You are setting the aperture or the shutter and waiting for the camera to select the oppisite.  If you have selected an Av which requires a shutter speed too long to take the correct exposure, you will get very long shutter.

  You can up the ISO, or select a larger BC.

• monitor stays on sleep mode for windows vista

  Windows vista-processor is turned on but monitor does not wake up from sleep mode-continues to say goes into sleep mode.  by pressing the icon Moon, esc or space bar does not work.  help, please.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How can I turn off Compatibility Mode for a program that does not require it?

  I loaded iTunes 9.1 program has 64 bit for Windows 7. When I open it, I get a message that the program has been set to run in compatibility mode. He then States for best results, turn off the compatibility mode for itunes before you open it. How can I turn off compatibility mode?

  Hello Wynn 1,.

  Article Apple: http://support.apple.com/kb/TS1489

  Try the following steps to turn off Windows compatibility mode:

  1. Quit iTunes.
  2. Windows XP and Windows 2000: on the Start menu, click my computer (or double-click my computer on the desktop).
     Windows Vista and Windows 7: on the Start menu, click computer.
  3. In my computer, open the drive C:\ (or according to your drive Windows is installed on).
  4. Open the Program Files or "Program Files (x 86)" folder if you use a 64 bit version of Windows Vista or Windows 7).
  5. Open the iTunes folder.
  6. Right click on the app to iTunes (iTunes or iTunes.exe) and in the context menu, clickProperties.
  7. Click on the Compatibility tab.
  8. If it is checked, uncheck the box under compatibility mode.
  9. Click OK.
  10. Open iTunes and play a song.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• SFR in license cluster mode?

  If I run two ASAs in cluster mode, is there a special setting that I need to do on the modules of sfr?

  The pair of cluster ASAs forwards traffic to the two modules of sfr?

  Documentation is very vague on the subject of sourcefire, clustering, everything he says really is to "maintain a coherent policy on the modules of sfr and do not use areas during your period.

  Are there additional licenses required? IE I have control of x 2 + protect however only 1 AMP / URL license

  Does this mean that only SFR modules can process the malware and URL filtering?

  Any help would be greatly appreciated

  Thank you

  Are you running the ASAs in a pair of Active-Standby HA with module of firepower on each of them?

  If so, the licensing of the modules must match each module. Otherwise, you will not be able to appply URL filtering and policy file (AMP) on one of the modules.

  If the ASAs are truly in a cluster 2 nodes (not active-Standby) so it is even more important that licenses match because only by flow of traffic can take another Member as a transfer device.

  Ideally simply build you a set of policies in the Management Center FireSIGHT and apply them to two modules of firepower.

• Ensuring that my SSD boot drive is set to AHCI mode

  Hello

  To make a needed firmware update on my newly installed SATA3 instructions (6 GB/s) SSD, the manufacturer said that Windows 7 should run in AHCI mode. I'd appreciate if someone would answer the following questions:

  Q1 - How to determine if Windows 7 is running in AHCI mode? ( KB922976 apply?)

  Q2 - in the BIOS, the page where the cottage the SATA2 ports (3 Gbps) and where my CD/DVD drive is connected currently shows under Storage Configuration mode is set an 'Enhanced' and SATA before as 'IDE' not 'AHCI '. My SSD does not appear on this page, so is it relevant?

  Q3 - in the BIOS, under "Onboard Devices Configuration", the Marvell Storage Contrller is set to "IDE Mode" (the other options are 'AHCI' and 'Disabled') and the 'Marvell Boot Room' is set to 'Auto '. I suspect that this controller is one of my SSD. Is this relevant and if so, do I just put it mode 'IDE' to 'AHCI '?

  Ultinate of Windows 7 SP1 (64-bit)

  Motherboard - Asus P & P55D-E

  -Boot disk Kingston HyperX 240 GB SSD attached to the gray SATA3 port on the motherboard.

  Thank you

  Hello

  I am pleased that you can enter the world of the AHCI.
  -J' have only changed the first two entries without the need for the second. So I can't tell if this is important or not. It seems not so much for me.
  -You're good to go with the update of the firmware. It's a good thing that your reader can be upgraded to Windows. My OCZ SSD requires a boot for flashing CD.
  -In my case, I had set my IDE DVD drive because it would not work in AHCI. Have you tried to use it? If you have any problems, leave as is.
  Carlos

• Smartphones blackBerry how to change the connection mode for a BlackBerry Internet Service account on my 9700

  Got my first BB is the 9700 and I believe that my company doesn't have not BES, I must connect on my BIS via a computer to set up my work email (Microsoft Exchange Server). After having read about it and try, I get an error message on the Web site of my provider which basically means that I need to change the connection mode for a BlackBerry Internet Service account. I checked the site Web of Blackberry and the instructions do not work for my 9700. Can someone help me please?

  Thank you very much

  Buskroth

  the link provided should have addressed your question, if you "can't get there from here" - I would suggest that you contact your carrier because they need to move your account password enabled allowing connect you via a non - BB browser to set up your BIS email setting...