SFR in license cluster mode?

Similar Questions

• Is set in cluster mode for a PV220s "sharing"?

  Hey all,.

  For some time I have approached anything with the PV220s (only because its been itself features news!) but is considering a change in the current configuration.

  Currently, table is linked to a single PERC controller and lapping joined bus mode using all the discs 14. I think to do sets up another server connected to the second EMM and share the whole.

  This will happen because I do come aboard another server on the current workload and you need to move the databases.

  I have the following questions: -.

  1. If I understand correctly, a disk will be lost. This can then be configured as a hot spare or physically disconnected?
  2. This configuration is as simple as turning off the power, press the switch cluster mode and reboot all servers?
  3. It would be preferable to use instead the split bus?
  4. Choice of the mode of bus on the fly would cause data loss?

  As I said, its been a while that I have drawn on the PV since its been working fine. Maybe I shouldn't touch something which did not gave no problem, but I could do with the help of better space between the 2 servers.

  See you soon,.

  Pop

  
  

• Conversion of Standalone put in Cluster Mode of interconnection fabric UCS

  Dear all,

  I have an environment, where the configuration is done on the stand-alone version FI. Now the customer has purchased another FI.

  Ask that let me know the best practice to convert the stand-alone version FI in cluster mode.

  If someone can share the document that would be great...

  Looking forward to hear as soon as POSSIBLE.

  Kind regards

  Gopi G

  Very simple. Connect to your existing fabric of interconnection of the field running. Type 'local-mgmt connection '.  In this next command, the IP address is the virtual IP address of the cluster. You will use this from now on to use UCSM. Type 'cluster enable IPAddress '. Answer Yes to the prompt. Cable now your second interconnect with the ports of L1 and L2 as a normal cluster configuration.

  You will need to rework your service profiles since you now have a side B available.

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/SW/GUI/config...

• License cluster interconnect

  Do you need to buy ports for both the subordinate and the interconnections of active tissue? I assumed it would be one license per cluster pair. After you apply a new license on a primary port of FI, I could download the same license for the subordinate, but it does not show the downloaded license file tab and the corresponding port is still without a permit.

  Yes, a permit on each FI is necessary because they are not shared in a cluster.

  Sent by Cisco Support technique iPhone App

• HV/license/Cluster/Vcenter

  I'm looking for the report as below, as I mix ent & ent + license

  I had a starting point, but not able to join the bits

  http://www.peetersonline.nl/2009/01/getting-detailed-VMware-license-information-with-PowerShell/

  I need to report: -.

  Type of host/Licnese (ent or ent +) / Cluster /Vcenter

  Please suggest

  Would this help Re: to extract details allowed allocated to different vcenterRe: to extract details allowed allocated to different vcenter  

• VMware 5.1 with compatibility virtual RDM and Microsoft SQL Cluster mode

  Hello

  I am a bit confused by the VMWare documentation and hope someone can point me in the right direction.

  I want to know if it is possible and supported to create a cluster of SQL 2008 R2 2 nodes (Server 2008 R2 SP2 are VM) on a 2 node cluster VMWare 5.1 with the use of Virtual RDM compatibility?

  When you read the PDF on vsphere5.1 on the link below on page 9, there's a indicating note 'NOTE Clusters on multiple physical computers with no-pass-through RDM is supported only for Windows Server 2003 clusters. It is not supported for clustering with Windows Server 2008. »

  http://pubs.VMware.com/vSphere-51/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-51-Setup-MSCS.PDF

  So that means that I want "a 2-node cluster sql 2008 R2 server" is not supported?

  But I also found this link below and in the table of the column on the Cluster SQL line RDM is said 'yes' with a 2.

  VMware KB: Microsoft Clustering on VMware vSphere: guidelines for supported configurations

  Means 2/redirects-> for more information on shared disk configurations, refer to the Disk Configurations section in this article.

  -> Disk configurations

  • RDM: Configuration using a shared Quorum for storage or data must be on Fiber Channel (FC) based on RDM (physical cluster across boxes "CAB" mode, virtual mode for cluster in a box "IPC") in vSphere 5.1 and previous versions. RDM on storage other than CF (iSCSI and FCoE) are supported only in vSphere 5.5. However, in earlier versions, FCoE is supported in very specific configurations. For more information, see Microsoft clustering solutions table above note 4 .

  What follow-up note4->

  1. In vSphere 5.5, native FCoE is supported. In vSphere 5.1 update 1 and 5.0 Update 3, two cluster configuration of the node with Cisco NAC (VIC-1240/1280) cards and driver version 1.5.0.8 is compatible with Windows 2008 R2 SP1 64-bit guest operating system. For more information, see the VMware hardware compatibility guide:
     • Cisco UCS VIC1240
     • Cisco UCS VIC1280

  This means that it is suuported, I "m confused.

  Hi Bypy,

  Two windows 2008 R2 SQL virtual cluster nodes with RDM is supported only for the IPC or Cluster In a Box that is to say if the two virtual machines reside on the same host ESXi. The same configuration is not supported for the cabin or Cluster across boxes (virtual machines running on different hosts ESXi).

  The CAB, you go for the physical RDM mode.

  According to this link, http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1037959

  SQL Cluster using windows 2008 R2 is supported for both physical and virtual mode RDM. Between physical and virtual mode depends on whether you want the CAB or IPC respectively.

  I hope this helps.

  See you soon,.

  Arun

• VM and cluster mode CVS do not match

  My group is in AMD Gen 3 mode but I have a handful of virtual machines to the bosom of this cluster that are somehow ADM Gen 1 mode, so that they cannot be vmotioned hot.

  Is there a way to change that many vms EVC mode machines are turned on?

  The host runs 3.5 ESXi and VCenter is 4.1

  Thanks, jb

  Try the steps if you have below

  1. turn off power the virtual machine.

  2. click on the link change the settings of the virtual machine.

  3. click on the Options tab.

  4. Select CPUID mask under Advanced.

  5. click on advanced.

  6. click Reset all to default.

  7. click on OK.

  8. click on OK again.

  9. turn power on the virtual machine and migrate.

• How to change an effective policy in host and Cluster mode?

  HI -.

  I struggle to change policy effective default on 'Custom' in vCOPS host and Cluster view.

  I notice that I can go to the view of the group, create a group and associate a strategy with the group.
  But I don't want to use groups. I like the host and Clusters main view and prefer to be able to change an effective policy on a live cluster from this point of view.

  Possible?

  Type r

  Björn.

  Hello Björn.

  Only groups can be used to associate a policy customized to objects.

  Thank you

  Alex D.

• License - evaluation Mode of expiry

  Can I continue using ESXi 5.1 after 60 days of evaluation? I thought it was free, and now it gives me access more. Says the license has expired and I can access is no longer. How to upgrade?

  Assign the license key that you have, as mentioned in the article that I posted earlier.

  André

• Question about the OIM11gR2 cluster mode

  All,
  
  We have a clustered environment, where 11 GR 2 IOM is running.
  
  Now, we are going to develop an application that will call all APIs IOM and deploy it in IOM managed server.
  
  Please let me know your suggestion to this implementation.

  That's why I suggested to develop APIs using platform service instead of oimclient service.

• SSL VPN using ASA 5520 mode cluster - several problems

  I configured 2 ASA 5520 s in the load balancing cluster mode. I connect using anyconnect and I download the customer the first time and everything works well except outlook. I don't know why outlook does not work.

  The second problem is after the anyconnect client is installed on your machine, he remembers that ASA (say ASA2) he first connected and the GUI shows the address IP of ASA2 instead of the virtual IP address of the cluster. I want users always connect using the virtual IP address.

  The third problem I have is there is a default group of SSL VPN and I want all users to use this group. In the initial web page, there is a drop down menu which shows that this group, but I still want to disable this menu drop-down.

  Any suggestions?

  To disable the drop-down menu, you can turn it off with the command

  WebVPN

  no activation of tunnel-group-list

  This will take care of your last issue.

  ***************************

  You can create a profile of the Anyconnect client with the name of the server you want to connect with and that make the ASA that will solve your problem of virtual IP.

  **************************

  Regarding Outlook, do you use specific ports which allows inspection of the ASA. Take a look at the list of inspection on the SAA and perhaps try to disable inspection and see if it works.

  *****************************

• Changing the Mode of EVC Cluster for guests of Intel

  We cross a turnover of rental for our ESX host that puts out some old CPU architectures. Once we get rid of these hosts, we will be able to raise our EVC Cluster mode.

  (1) once ready, are there special precautions to take before changing the Mode of EVC Cluster? Then I just change the setting?
  (2) when the VMs will begin taking advantage of the new architecture CPU (a reboot will or VMs must they be turned off)?
  (3) any question with VM do not be put off for long periods of time after the VCA mode change?

  (4) all other things to worry about?

  If I raise the EVC mode, virtual machines will be able to access the new features available in this mode?

  Is that you turn off and then turn on the virtual machines. A reboot of the guest operating system is not enough. A virtual machine determines which functions are available to turn on and cannot access all the new features that are added until the power is turned off.

  http://KB.VMware.com/kb/1005764

• Cisco Anyconnect mobile licenses

  Hello

  We need to buy 1200 anyconnect Apex licence, I read the ordering guide

  for anyconnect but he's confused, I have to mention that we have 2 ASA 5545 - X in cluster mode,

  I don't know how to order. It's the way that I think is true, but I'm not sure.

  part number                                                   Qty

  ----------------------------------------------------------------------

  L AC-APX-5 YR-G AC-APX-5 YR - 1 K - S 1

  L AC-APX-5 YR-G AC-APX-5 YR-100 S 2

  Thank you.

  It would be OK for a 5 years AnyConnect Apex for 1,200 users license.

  Note the Mobile feature is included with Apex or Base Anyconnect 4.x licenses.

• What is nbl cluster

  my windows 2003 Server generates this message in the event viewer
  "NBL 0.0.0.0 cluster: cluster mode cannot be activated due to the mistake of setting. all traffic will be passed via tcp/ip. restart after solving the broblem running followed wlbl start wlbs

  my windows 2003 Server generates this message in the event viewer
  "NBL 0.0.0.0 cluster: cluster mode cannot be activated due to the mistake of setting. all traffic will be passed via tcp/ip. restart after solving the broblem running followed wlbl start wlbs

  Please repost this under http://social.technet.microsoft.com/Forums/windowsserver/en-US/home

  his dedicated servers and you could get best information it

• ESA license request

  I have an esa with a 500 user license + cluster (free) licenses, now we brought 2 new sec we have obtained licensing cluster that is free, now, I know that I collect all this e-mail devices, then it wil work and share the licenses to the cluster.

  Now the question is that I want to delete my old DRY with a 500-user license, will have 2 new sec will continue to work after I have remove the old esa of the cluster?

  Hello

  When you cluster ESA/s they do not share license information. You need to import the license keys individually for each device.

  Thank you!

  -Dennis M.