is the hdmi port, an input or output set

Similar Questions

• Satellite A300 - using the HDMI port as an input

  Hello

  Currently user of a Satellite A300-1OT, I would like to know if there is a way to use the HDMI port as a port of entry, in order to connect my blue-ray on my computer drive

  THX
  Ludo

  Hello

  The HDMI port is a video output port!
  It sends video and audio signals and doesn't receive signals

  Simply said; No, that's not possible

  Good bye

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

  

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,

• HP laptop - 15-f233wm: external monitor connected to the HDMI port has video but NO sound

  If I connect an external monitor to the HDMI port and check my audio device on the right on the screen cone winder it displays 2 only) 1 HP and Intel) 2 Audio display speakers and No HDMI option selection.

  Ernie4576 wrote:
  

  If I connect an external monitor to the HDMI port and check my audio device on the right on the screen cone winder it displays 2 only) 1 HP and Intel) 2 Audio display speakers and No HDMI option selection.

  By adopting the option monitor MHDI PC/AV Pc mode will solve the problem, I use a unit screen color Samsung TYPE model / MODEL: C27F591FD (N).

  The device playback option on the care of the portable property are all set to default, Intel C27f591 display sound card works fine!

• Satellite L650 - no signal on TV via the HDMI port

  Hello

  I have a problem with the HDMI port. I am not able to connect the L650 to my TV. There will be no incoming television signal. The TV port is correct because I can connect my digital camera without any problems. The HDMI port is not displayed in the hardware Manager. I don't use the version of windows 7 that has been installed originally. I formatted the disk and have reinstalled a different version of windows.

  Do I need a special driver to activate the HDMI port? I just installed the ATI catalyst driver. If you would like more information, I'll try to give them as soon as possible.

  Thank you very much for your help

  Hi song2.

  > have reinstalled a different version of windows.
  And what version of Windows you have right now?
  You have yellow exclamation points in the Manager of devices or unknown devices?

  In general there is no driver special HDMI port. If you connect your laptop to TV/monitor external, you must press the FN + F5 key combination to switch between monitors.

  Check it!

• Satellite C660: How to get the HDMI port?

  Hello

  Could someone tell me how to get hdmi on the laptop as the laptop has a hdmi port

  Thank you

  Hello

  But what C660-xxx you? Perhaps you could use a
  It is not possible to add arbitrary ports.

  Ports are part of the motherboard and if the laptop does not provide an HDMI port, so, you will not be able to use that :(

  Of course, you could use a device that would be to convert a digital video signal, but they are expensive and in my opinion not worth trying it s better to buy a laptop that would support the HDMI port instead of buy a converter for 200-$300

• Could not get the HDMI port to work on the HP touchsmart.

  I have a HP Touchsmart 600-1265 with an HDMI port. I have connected the computer to the TV but can not get any audio/video to display. I don't know if you need to activate the port or what you need to do to make it work.

  When I push the A / V button above the HDMI port it shows the computer displays and below, it is then them a VGA and HDMI boxes but when I scroll down and select HDMI the screen just empties for a few seconds and then back on the computer screen.

  What should I do to make this work?

  Yes, the entry also. This is what the switch you mentioned.

  See you soon,.

• Can I use my Switch SW3-013-1566 as a monitor of the camera using the HDMI port?

  I did research on this scenario but see no mention of the possibility of using my Acer

  SW3-013-1566 tablet as a digital monitor for my Canon 7 d DSLR camera. If anyone knows how this can be done please let me know and which downloadable programs I could use.

  Thank you

  Well, according to this video , you can. You use the USB connection and software from Canon. You wouldn't be able with the HDMI port without any other additional hardware to do the video cpture.

• I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Original title: multiple monitors

  I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Hi David,

  Thanks for posting your query on the Microsoft Community.

  I suggest you refer to the Microsoft Help Articles below and try the steps mentioned.

  Check out the link:

  http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors#1TC=T1

  You can also check:

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Where is the hdmi port?

  I have a 1205it TouchSmart 600 c.

  It's the http://h20000.www2.hp.com/bc/docs/support/SupportDocument/c02575520/c02162360.jpg port

  I do not open. The shooting, but nothing. How do I? I'm afraid to break

  Oh, are you talking about the three USB ports that are under a cover on the left side of the system? Those who are always included. If you remove the cover, they will be there. There are also two USB ports to the bottom left of the system.

  Ports of entry/output only option (I think) are those that are included in the game console - video display entries, including the HDMI interface.

  May I ask if there is a certain task you're trying to do with your computer? If you let us know what you try to use the input/output ports, because we might be able to help more easily.

• HP Beats 23 all-in-One: How do I access the hdmi port on an all-in-one pc of beats

  I want to connect a Chromecast for my all-in-one PC. It has a HDMI port. How can I change what is displayed?

  Thank you for the additional information.

  Here's what the specifications say HDMI port:

  Button HDMI In (to get the computer to recognize a HDMI connection, press the HDMI In when an HDMI cable is connected to the rear HDMI port.)

  He says, I don't think that the port can be used for output.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• configure separate lines on a DIO port as input or output

  IM using a NOR-DAQmx map (6251) in LabWindows/CVI environment.

  My problem is with the EEPROM reading, but both his (output of 6251) clock and data lines (entrance at 6251) are on the same physical channel (Port1 DIO)

  How to use CVI to configure individual port lines, so that a single line (say Port1.6) is a release and another (say Port1.7) line is an entry.    And therefore not have to keep starting and collapses of the NIDaq read or write operations across the port only once, but just let each line separate running as a read or write until the operation is complete.

  Thank you

  Hi Rob,

  The map of PCI-6251, you can configure different lines on the same port for the inputs and outputs with CVI.  I've attached an example that does what you are asking here: it uses port1, line6 port1, line7 as input and output.

  Also, for others reading this post, more information on this topic are in this post on the forum as well.

  Best regards
  Erik

• G7-2246nr support entry via the HDMI port?

  I have a laptop 2246nr g7 with a class discrete AMD Radeon HD 7520 graphic card. The processor is an AMD A6 - 4400M.  I am running WIndows 8.1 64bits.

  I would like to record a video of the HDMI output of a DSLR to the laptop. The laptop does it take?

  Hello

  Unfortunately, your laptop's HDMI port was released only.

  Kind regards

  DP - K

• Using the same PIN for input and output

  Hello

  I would use a single PIN for input and output.

  I'm experimenting with writing a driver for the DHT11 that using a single interface

  I have the following code to open the PIN, but it fails

  GPIOPin dhtPin = (GPIOPin) DeviceManager.open (new GPIOPinConfig (0, 17, GPIOPinConfig.DIR_BOTH_INIT_INPUT, GPIOPinConfig.DEFAULT, GPIOPinConfig.TRIGGER_NONE, false));

  VM - iso [DAAPI] =-1: not supported direction was placed for 17 GPIO pin number. Open failed

  jdk.dio.InvalidDeviceConfigException

  -com/oracle/deviceaccess/gpio/impl/GPIOPinImpl.openPinByConfig0 (), bci = 0

  com/oracle/deviceaccess/gpio/impl/GPIOPinImpl. < init > (), bci = 87

  -com/oracle/deviceaccess/gpio/impl/GPIOPinFactory.create (), bci = 6

  -com/oracle/deviceaccess/gpio/impl/GPIOPinFactory.create (), bci = 3

  -jdk/dio/DeviceManager.openWithConfig (), bci = 49

  -jdk/dio/DeviceManager.open (), bci = 6

  -jdk/dio/DeviceManager.open (), bci = 2

  -dht11 / DHT11. < init > (DHT11.java:42)

  -dht11 / DHT11. < init > (DHT11.java:37)

  -dht11/DHT11Midlet.startApp(DHT11Midlet.java:25)

  -javax/microedition/midlet/MIDletTunnelImpl.callStartApp (), bci = 1

  -com/sun/midp/midlet/MIDletPeer.startApp (), bci = 5

  -com/sun/midp/midlet/MIDletStateHandler.startSuite (), bci = 264

  -com/sun/midp/main/AbstractMIDletSuiteLoader.startSuite (), bci = 38

  -com/sun/midp/main/CldcMIDletSuiteLoader.startSuite (), bci = 5

  -com/sun/midp/main/AbstractMIDletSuiteLoader.runMIDletSuite (), bci = 132

  -com/sun/midp/main/AppIsolateMIDletSuiteLoader.main (), bci = 26

  I have the following permissions value

  jdk.dio.gpio.GPIOPinPermission "*: *" 'open, setdirection '.

  jdk.dio.DeviceMgmtPermission "*: *" 'open '.

  I tried a few other pins too, I don't know if some ankles are entered or only output pins.

  Any help would be appreciated. I could not find documents explaining how to configure more than one action for a permission ( 'open, setdirection'), so I tried just until he stopped to complain about the values...

  What I need is to open a PIN, set it OUT, write a few high and low values... set it to the direction of the ENTRANCE, and reading back high and low values... But right now my GPIOPinConfig seems to be problematic

  (... Configuration of the meaning to DIR_INPUT_ONLY or DIR_OUTPUT_ONLY, works until I try to change the direction of the port - what is expected...)

  Hi Charl-

  As far as I KNOW, he is there no current plan to apply 1 thread in Java ME Embedded.

  I also looked at Pi4Jand they do not also support 1-wire, however, there is an enhancement request to add support for the bit hit Linux driver will have to perform 1-wire work.

  The raspberry pi support it, it's just Java ME holds back me.

  BTW - the article has been referenced in the enhancement request notes that he is not taken in native support for 1 wire on the Raspberry Pi - it requires a Linux kernel driver module.

  Tom