Satellite L650 - no signal on TV via the HDMI port

Similar Questions

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

  

• G7-2246nr support entry via the HDMI port?

  I have a laptop 2246nr g7 with a class discrete AMD Radeon HD 7520 graphic card. The processor is an AMD A6 - 4400M.  I am running WIndows 8.1 64bits.

  I would like to record a video of the HDMI output of a DSLR to the laptop. The laptop does it take?

  Hello

  Unfortunately, your laptop's HDMI port was released only.

  Kind regards

  DP - K

• Satellite L650 - video but no sound on the TV with an HDMI cable

  I can't get his play through the TV connected via the HDMI cable. In the Middle the "digital output" option is not active and cannot be configured. The message is 'not connected '. The State of the unit on the screen of the driver (Conexant Audio Driver AMD HDMI codec) properties is "(ce périphérique fonctionne correctement)."

  Have you tried to connect the HDMI before starting the system, but no help. Can anyone help?

  Hey Buddy,

  > In the Middle the "digital output" option is not active and cannot be configured
  Generally if you have connected the HDMI cable you should be able to configure the Digital Audio (HDMI) under sound > playback.

  If the option isn't available I guess that it s something wrong with his driver. In your case, I'll try to update the audio driver and the latest version can be downloaded on the official page of Toshiba.

  Check this box!

• Satellite A300 - using the HDMI port as an input

  Hello

  Currently user of a Satellite A300-1OT, I would like to know if there is a way to use the HDMI port as a port of entry, in order to connect my blue-ray on my computer drive

  THX
  Ludo

  Hello

  The HDMI port is a video output port!
  It sends video and audio signals and doesn't receive signals

  Simply said; No, that's not possible

  Good bye

• to detect the meter output via the parallel port

  I need to detect the meter count trigger, to perform an operation every time. I think passing the input signal pins (pins of status or control). The meter uses is omron H7EC.

  I lowered the voltage of 24 V to 5 v with resistors.

  But I can't get the entry via the parallel port.

  All the stems of my status are still high.

  What should I do, please help.

  In the parallel reading write loop.VI, the splash screen is attached.

  I suspect the entries on the parallel port pins have a resistance low pullup to 5V, so they tend to float high (logic 1).

  Try to add a 4 700 Ohm resistor between pins of entry and mass of the parallel port, see if it then reads down pulldown (logic 0). If so, then keep the resistance in place and connect the signal of 5V that you want to monitor at the entrance.

  -AK2DM

• Satellite X 200 SLI falls down when the HDMI cable is connected

  Hello world

  I'm very sad about this. You just bought a new brand Toshiba x 200 SLI and I get a crash (blue screen on Vista) when I plug the HDMI on my Philips Full HD TV.

  I did not almost any update, but still, this shouldn't happen on arrival!
  Clues?

  Many thanks for any help on this!

  Hmmm this error is known to me, but unfortunately it is not easy to tell what's exactly wrong or what causes this problem.

  Sometimes this BSOD could be linked to the issue of driver/software, but the last time I received this message on my 5 year old laptop and finally I discovered that one of my modules of memory was defective!

  However, this laptop was equipped with two GPU chips then perhaps there could be something wrong who knows?  :|

  But it s very strange that in this case using the HDMI port to my knowledge only this satellite X 200 series are supported by a standard HDMI V1.2 (up to 1080i).
  Did you use the right cable?

  As you can see an investigation is necessary to locate the cause of the error.

  If there is something wrong with the hardware I would recommend contacting the ASP in your country in order to clarify this strange issue.

  Good luck

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• Satellite C660: How to get the HDMI port?

  Hello

  Could someone tell me how to get hdmi on the laptop as the laptop has a hdmi port

  Thank you

  Hello

  But what C660-xxx you? Perhaps you could use a
  It is not possible to add arbitrary ports.

  Ports are part of the motherboard and if the laptop does not provide an HDMI port, so, you will not be able to use that :(

  Of course, you could use a device that would be to convert a digital video signal, but they are expensive and in my opinion not worth trying it s better to buy a laptop that would support the HDMI port instead of buy a converter for 200-$300

• Bad resolution of Qosmio G30 - external display via the HDMI connection-

  Hello! This problem makes me crazy, please help if you can...

  I just bought a G30-102 and I am trying to use it with an external display via the HDMI connection. The problem I have is that the native resolution of 1920 x 1200 cut the edges of the screen and the quality looks terrible - its almost as if the entire screen is enlarged. I tried with a BenQ FP241wz initially (1080i is 1920 x 1200) and the Toshiba helpline could not find a solution either - even after painfully reinstall all the drivers, etc..

  Its been going on for so long, I thought I'd try it out with my HDTV instead, just to be sure it wasn't a monitor problem. So I tried with my Toshiba 32WLT66 - and come to find that it has exactly the same problem.

  All the display settings appear to be correct and the G30 is convinced that the result is correct, so I have now it is - don't you think not that this is a problem with my HDMI port?

  Please help, I'm a designer, and it is essential that I use the machine on a large screen. If it is a hardware of the G30 problem, I need to talk to Toshiba immediately replace or fixing.

  Hello

  I tested the Qosmio G30 (HD-DVD) with my LCD TV using a HDMI cable. Everything worked perfectly. As a first step, I put 1080i value in the settings of the BIOS and after following the instructions in the HDDVDGuide document under http://support.toshiba-tro.de/kb0/TSB6A01LH000LR01.htm

• Transfer an image via the serial port of PC to PC

  Hello world

  can someone help me to transfer an image file to another PC with Labview via serial port?

  I tried to use the IMAQ functions to decode the image to a string. but there is a problem at the receiving end to retrieve the image.

  is there an easy way to just sent and receive an image via the serial port file?

  Thanking you in advance.

  Morgane

  Hello

  I love people who love to learn. Thanks for listening.

  I updated read and write Subvi is because I believe keeping simple and straight threads more readable program and less bugs remain.

  Even better, my eyes straight lines i do not get tired too soon.

  good luck with your program.

• my digital TV show no signal when connected to the hdmi to my hplaptop port

  I plugged the hdmi to HDTV cable end and the other end to the hdmi port to my laptop HP in the off-mode, then I turned the laptop and the tv on and seledted in my TV HDMI input signal. After that a few seconds tv monitor displays the data recovery then it comed no signal .do I need to make changes in my hplaptop pls help to solve this problem. Thank you.

  Hi spkmd,

  Follow these methods.

  Method 1: Check with the manufacturer for the software update of the HDMI driver.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Method 2: There may be a combination of keys on the laptop to change to HDMI manually, usually a FN + F # combination. You'll need to refer to the documentation for the laptop to which key can control the HDMI. Also, check the manual that came with the TV.

  Method 3: You can also go into the display properties and change the default view for the HDMI. To check the display properties, follow these steps:

  (a) click Start, then Panel.

  (b) click appearance and themes, and then click display.

  (c) in the settings of the display properties dialog box tab, click the icon of the monitor that represents the monitor you want to designate as the primary monitor.

  (d) click to select the use this device as the primary monitor check box. Note that this check box is not available when you select the icon of the monitor that is currently set as your primary monitor.

  For more information, see the following link:

  How to configure and use multiple monitors in Windows XP

  http://support.Microsoft.com/kb/307873

• How do I receive audio via the DVI port?

  Hello.

  I have a HP Pavilion p6-2378, that I use as a PC Home Theather. The motherboard on this model lacks an HDMI port, which is how the rest of my system connects. I use a HDMI-DVI adapter and video works perfectly, but there is no audio data. Several people told me that the sound signal can transmit through the DVI port. Y at - it a setting or a software that I have to make it work?

  Thank you.

  Hello

  This article could make interesting reading.

  As suggested above by Paul, use a discrete videocard with HDMI.

• BlackBerry Torch 9860 smartphones does not connect with the pc via the USB port.

  We have a new Torch 9860 which does not connect with a PC via the USB port.  What should do?

  SlaKir wrote:

  The answer is YES

  Well, then your USB port is likely.

  Restart the PC and BlackBerry (with smart BlackBerry power onthe phone, remove the battery for a minute and then reinsert the battery to restart).

  Then, connect with the USB cable and a rear main USB port at the back of the PC, not a front USB port.

  Hear a ringing or sound from the PC indicating that the BlackBerry is connected?

  Start the BlackBerry Desktop Manager software. Give it a minute to recognize the connected BlackBerry device... you see the code PIN of BlackBerry on the PC in the BlackBerry Desktop software?