Is the latest version of Itunes, one need to use?
I always use the version 11, as he was Darling 'bar' side that shows my library, store and playlists, column 'browser' as well.
I remember that some of the more recent version have removed some of the above features and I was wondering if the latest version (12,3?), has brought new?
I ask because I can save is no longer my Ipad to the latest version of Itunes that I use, and I need to save my Ipad to make a Hard Reset.
Any help/insight here is greatly appreciated!
Use the latest version of iTunes. There is a view of playlists which is almost the same as the old sidebar less the Panel at the bottom left of the work. Column browser is still available.
TT2
Tags: iTunes
Similar Questions
-
I have an iPhone SE
my iTunes is on my laptop HP addition running Windows Vista. (32 bit not 64) It is not able to upgrade to Windows 7.
When I plug my iPhone to sync with iTunes, it gives an error message saying that I need to download the latest version of iTunes. When I try to do, I get a message saying that my iTunes is up to date with the latest version of iTunes? If my laptop is running vista only she does support the latest version? If this is the problem I wish iTunes download center say the my device does not support the latest version of iTunes. the version I currently have is the only one my device is available for download.
How to access my library iTunes other than buying a new laptop
IPhone WILL not work with Vista. It is not supported. Can't remember where I saw it, but there was something about Windows Vista not supported for iPhone SE. I'll keep looking.
Found at the bottom of the iTunes download support page. Download iTunes 12.1.3 for Windows (32 bit)
This update allows you to synchronize your iPhone *, iPad * or iPod touch with iOS 9.x and earlier on Windows XP and Windows Vista PC.
* iPhone OS and iPad Pro (9.7 inches) is not supported on Windows XP or Windows Vista.
-
I downloaded the latest version of iTunes to restore the backup of my new iPhone 7. When I plug my computer into iPhone 7, I get the message that I need to update iTunes. It is to show that I have updated the latest version, so I now do not know what to do. Need help!
In iTunes, go to the ' about iTunes' topic. What version do you currently use?
What version of OS are you using on your computer?
Your new phone should you use iTunes 12.5.1 requiring 10.9.5 OSX or higher.
-
I've updated iPhone 9.3.3 and iTunes for 12.4.3.1; both the latest versions
But iTunes does not recognize my iPhone, why?
Where you say that you need to download the latest version of iTunes? What is a ToolTip that appears in iTunes when you connect iPhone to your computer? Because if this is the case, iTunes detects your iPhone. So where is the problem? It won't let you not sync to iTunes? It won't let you save with iTunes?
-
When I open itunes, I can no longer be sunch my iPhone. I get a message that says that I need to update to the latest version of itunes. But I have the latest version of itunes on my imac.
My mac running OS x 10.6.8
My version of itunes is 11.4
My iphone is running OS 9.3.2
If I uninstall itunes and reinstall I lose all my data, applications, contacts, photos and songs?
You need Cougar 10.8.5 or later version to run the latest version of iTunes which is 12.4.0.119
That the iPhone will need iTunes 12.3.3 or higher
You can download Mountain Lion here
http://store.Apple.com/us/product/D6377Z/A/OS-x-mountain-lion
Or you can update to El Capitan if your Mac is capable
Support Apple OS X El Capitan - technical data -
You did not provide the specs on Mac-
See also this thread
Re: How to restore iPad again when the message says need new itunes version
-
I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)? Fact is need to update itunes?
Hi sonalnj,
I understand that you cannot synchronize your iPhone as iTunes is requested it must be updated. I can help you with that.
According to the technical specifications for a 6 s iPhone, you need a Mac running OS X v10.8.5 or later version with iTunes 12.3 or later. Because you are on OS X 10.6.8 your version of iTunes is up to date with this OS.
iPhone 6 s Tech Specs
http://www.Apple.com/iPhone-6s/specs/Now to fix that, you need to update your Mac OS X 10.8.5 Mountain Lion or OS X 10.11 El Capitan. If you want to go to the Mountain Lion, you can do it with the first link below. The cost will be $19.99 and a code will be delivered to you if you can download it via the Mac App Store. Once you have upgraded, be sure to make all software updates to go with him to get the latest version of iTunes.
OS X Lion mountain
http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lionNow the other option is to move to OS X 10.11 El Capitan, and is a free update that you can do right in the Mac App Store, if you meet the system requirements. Take a look at the following article for more details on how to do it.
Update of OS X El Capitan
https://support.Apple.com/en-us/HT201475Nice day!
-
I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. How to synchronize or import/export files(images/music)? Fact is need to update itunes? Also you can sync ipod touch?
iOS9 on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher. Update of the system only checks the updates for the current version of the system you run, but that itself can be updated. It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. If she can run 10.8.5 or higher, you can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11. El Capitan can run slower on older machines and require the additional purchase of RAM. Making a big jump in versions of system is also more likely to affect the old software.
At el capitan Snow Leopard, it will make my macbook is slow? - https://discussions.apple.com/thread/7412959
Mountain Lion 10.8 purchase link United States of America - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion
Mountain Lion 10.8 purchase link U.K. - http://www.apple.com/uk/shop/product/D6377ZM/A/os-x-mountain-lion
Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/
If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.
-
Why not the new iPhone 6 connect to iTunes? It says I need to download the latest version of iTunes, but my version is the latest. 12.2.2
What is the eversion of Mac OS X on your Mac? The latest version of iTunes is 12.3.2. You need to update your OS X to download the latest version of iTunes.
-
I have an iPod classic, 160GB, 2009 (I think that I bought in 2011, but they say it's a 2009 version). I took good care of her, and it worked wonderfully for me. Recently, with the latest updates of my OS, iTunes, etc. on my MacBook, I got the iPod synchronization problems. This last time I tried, the iPod has not been recognized by iTunes, or it would be recognized and switch between connected and synchronization, but never go further. Finally, if I left it long enough that, it would eventually be sync, but then he would go back and forth between sync synchronization, connected and finishing. After leaving he did that for a while, he would finally come with an error message saying that the iPod could not be synchronized. Then my iPod was erased at all to this subject (everything is always on my iTunes at least library). I tried to restore my iPod, which she did, and then synchronize everything again. He went through the process of synchronization, only to say in the end could not be synchronized. Sometimes my iPod not even be recognized by iTunes.
So I called Apple Support and they told me that my iPod software is not compatible with the iTunes software. Both were up to date, so I think I 2.0.4 on my iPod and 12.3.2.35 on my iTunes. Apple told me that I can't go back to an earlier version of the iPod software because I have no iPod backups on my iTunes. Therefore they told me the only solution is to spend $ 400 on a new iPod, which I can't afford to do it, nor have you I feel it's a reasonable solution, since my iPod is perfectly good and I was very careful care of her.
Is there anything that can be done to make the two compatible? Can I download an older version of iTunes? I'll be able to get my most recent iTunes library on the older iTunes? Should not continue making it compatible, the iPod classic and iTunes since so many people use iPod classic, and they are the only thing like him around?
I looked in the other forums on the topic, but nothing seems to talk about this compatibility problem and provide a solution. Someone at - it ideas? Can you manually manage your music on your iPod, even if the two are not "compatible"?
Thank you!
So I called Apple Support and they told me that my iPod software is not compatible with the iTunes software.
Seriously...? My 'classic' 3rd gen iPod in 2003 still works fine with the latest version of iTunes and the latest OS X. Even the original iPod should still work (assuming the iPod itself still works). Your iPod classic 2009 is certainly consistent. That support the needs of the person coming back through training...
When you connect it now, it seems in iTunes? Are you able to select in iTunes, go to the settings screen, where you see the iPod photo and name in the upper left corner of the window and a box below that?
-
IPhone 6 64 IOS 9.3.1 runs the latest version of ITunes 12.3.3.17
After I updated to the latest version of ITunes, when I run the synchronization, it goes through the six steps, and then returns the message that the backup has failed
Running on a 64-bit Windows 8.1 Dell computer.
ITunes now works much more slowly. Takes a long time to load. It takes more than a minute after I plug in my Iphone for the IPhone to be recognized by Itunes.
I rebooted the machine. Remove the locked file. All have failed to solve the problem
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.
More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.
Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.
If you have tried the suggestions above without success, then another option is to go back to the previous version of iTunes that has worked for you. See the roll back tips to installers of iTunes. Roll back of 12.3.3 will be to restore the pre-upgrade library in the previous iTunes libraries folder.
TT2
-
Can not install the latest version of iTunes. Everytime I try I get this error msg: "the component you are trying to use is on a network resource that is unavailable."
Then I click OK and get this msg: could not find the path C:\users\my name\appdata\local\apple\apple software update\itunes6464.msi.
I need to sync my new iPad pro and because used to synchronize requires the latest update, I have my laptop but I never have syncd my ipad with this computer and if I try to backup if I agree to erase everything on my device and sync with the laptop. Of course, I don't want to do what I want to see everything on the NEW ipad from the old version.
I went through the troubleshooting and found a solution, but when I had finished making all this trouble report said, there was a pesky itunes shortcut file on the left and I can not delete this shortcut, regardless of how many times I try. If I can't remove it, the Installation will be terminated. How can I delete this file?
For general advice, see troubleshooting problems with iTunes for Windows updates. Start by Missing MSI errors .
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
Download the latest version of iTunes with Windows 10
I can not download the latest version of iTunes with windows 10 to my laptop. I get the following message "the feature you are trying to use is on an unavailable network resource" I don't know what that means. Any suggestions?
Hello RavynnG,
Looks like you have a problem with the installation of the latest version of iTunes on your Windows computer, the error message you describe. Is this correct?
This sometimes occurs when the Windows registry has conflicting information on software are installed. One of the users of Apple for support communities - turingtest2 - has written a useful resource for this situation, found here - troubleshooting problems with iTunes for Windows... | Apple Support communities
Specifically -.
The following steps should remove the reference to a file missing .msi Windows Installer Service trying to access when installing iTunes.
- Press WinLogoKey + R, type Regedit in the Run dialog box and then press enter/return.
- Click on Edit > find, type the name of the file .msi problem, for example itunes6464.msi, change the boxes look so that only the data is checked, and then click Next. You should find it somewhere:
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\ {long string of letters & numbers} \SourceList - Right-click on the parent key immediate with the long string of letters & numbers that contains the list of sources with the reference to the .msi file, and then click export, save it to say the office with name iTunes.reg if the data can be restored if deleting it does not help. Now right click on the key again and select delete from the context menu. This should prevent the Windows Installer to search for the .msi file when you reinstall iTunes.
If installation will not yet pass by then double-click on the file iTunes.reg that you did to restore the data in the registry, and then use the method shown to install missing components to unpack the installer of your previous iTunes installation, then extract the .msi file, you need. Double-click this option to try to uninstall the component. There are links to recent versions of iTunes in the section of the older versions .
Once completed, you should be able to run the iTunes Installer, you can download it from this location - iTunes - download iTunes - Apple
Thank you for using communities of Apple Support.
Secure computing.
-
iPod Shuffle 4 GEN on 10 to win with the latest version of iTunes
So I have an iPod Shuffle (3 of them to be exact) and the latest version of iTunes for Windows 10 and when I Plug one in, an orange light starts flashing on the iPod itself. My question is:
IPod shuffle gen working 4 or synchronize with iTunes on Windows 10?
If so, please tell me why he's stuck on the restoration.
If not, tell me if it's FREE to get a new one. (Note: these things are of 2012-2013)
Thank you very much!
See this page to give a sense indicators: check the State and battery charge your iPod shuffle - Apple Support
Maybe one that flashes has been implemented for disc mode.
TT2
-
I 10.6.3 operating system. How can I get the latest version of Itunes
How you update to the latest version of Itunes when you only 10.6.3 operating system. I have an IMAC bought in 2008 8.1. I had to have a new
hard drive installed and had to reload the old records, so I'm stuck to 10.6.3. In the end, I want to load snow leopard, so that I can then update to the latest
Maverick. Thanks for any help you can give me.
Basically, you need to update 10.6.8 via control panel software update from the system preferences or Apple's Support site, and then either download El Capitan from the Mac App Store or click the purchases tab and redownload a BONE you obtained previously.
(142578)
-
My iTunes does not detect my iPad. I use Windows 10, Norton 360 and the latest version of iTunes. All software are up to date, and each says it works correctly.
Turn off or get rid of Norton. I really don't see why you need it.
Maybe you are looking for
-
My favourites run off the bottom of the page, and I can't move them to the top
When I open my bookmarks file and try to open a subfolder at the bottom of the screen, the bookmarks in this subfolder run above the bottom of the screen and I can't find any way to move them in a visible area.
-
What is the purpose of the files the (Inbox, trash, etc.) who are also in the default account?
What is the purpose of the files the duplicate (Inbox, trash, etc.) who are also in the default account?
-
I have an iMac and I'm running 10.4.6I am running Firefox 3.6.26 My problem is, when I shut down my computer, Firefox is not quite, so I have to force Firefox to quit. He's not leaving when I click on leave. Before this problem appears, Firefox would
-
G10: How to get S-Video In to work outside Windows MCE
Hello We know how get s-video in a qosmio G10 working beside windows MCE, I can't make it work with Windows Movie Maker, it just says: the material is begin used by other software, but even with just the defult running process, I can't make it work?
-
Hi all I'm reading the fields of existing MS Word documents in order to import data in Labview (I am currently using 8.0.1 Professional). Using the VI 'Word insert a field' I was able to insert a new field, but looking at the code, I'm not able to ch