is the SDXWIN32 program. LOCATION OF THE EXE: C:\WINDOWS\SYSTEMPROFILE\APPDATA\ROAMING\OZOO\SDXWIN. EXE, A VIRUS OR A SPYWARE?
Someone can help, how can I delete my registry? I have verizon security viss /McAfee it no crashes, but was not able to remove through scans. Can you help me? I have a slimline of 32 bits of vita. Thanks, Keith
Hi Keith,
You can check out the following link and try to download the Microsoft Safety Scanner and perform a full scan on your computer and check.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: When you perform the analysis, there are risks of data loss you can take a backup of important data before performing analysis.
Tags: Windows
Similar Questions
-
I think that the presets should be installed in the C:\Users\Frann-Serenity\AppData\Roaming\Adobe\Lightroom and perhaps even deeper in the folder to develop. I'm not sure because I'm a newbie at this. I have no idea how my Lightroom file put in my C:\Users\Frann-Serenity\Pictures. I have to install Presets but cannot get to work because they land in my pictures folder. Any help would be appreciated. Thank you
Hi FrancieLou,
The presets are stored in images when you have an option enabled in Lightroom preferences.
So, if you do not want them to be stored in the pictures folder, you must follow the steps below:
1. go in the Lightroom preferences > Presets tab
2 uncheck "save stations with this catalog" and click Ok.
Then, the presets would be stored in default C:\Users\UserName\Appdata\Roaming\Adobe\Lightroom\.
Kind regards
Claes
-
I want to know what means ERROR see the c:users\kevin\appdata\roaming\CTXfiHelp\rundl32.exe.log log file and how to fix it?
-
I need to know what software I can use with windows 7... Please help
Virtually all software current (software that has an update released in the last two years) are compatible with Windows 7. The following link leads to the site where you can enter a specific software, but another perhaps more accurate way is to do an internet search (Google, Bing, i.e.) to the support site for the specific company (supported in Google Chrome, Avast support, etc.) and check here if you are unsure of the compatibility of Windows 7.
Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx
Google Chrome system requirements: http://support.google.com/chrome/bin/answer.py?hl=en&answer=95411 -
Hello
use of labview to activate and run a .exe program located in a specific folder on the c drive?
When I run the program .exe manually from the command prompt I navigate to the desired folder, and then enter "runapplication.exe" to run the compiled c code.
I've searched the forums labview but especially articles relating to the creation of executables labview or labview .exe programs.
Also could call or run the TestSTAND .exe program without having to create a VI?
Thank you
try System exec.
-
Windows cannot find the program to open the exe file
I did the windows repair option by restarting then pressed f8 to get to come repair options. I did it to try to remove a number of problems of virus on my laptop. It seems that it has solved the problem, but now when I try to access one of my desktop icon shortcuts it indicates that windows cannot find the program to open the exe file. She does it with every shortcut. I can access the location of the program and then select open with and it will be opened in this way, but there is not and I have to select each time. Another option that works is a right-click on the icon and selecting 'start' and who will run the program properly. Other than simply double-click the icons automatically no longer works since I did this repair.
Windows Startup Repair fixed my problem, but now my desktop icons not properly opens with double-click
Hello
You can try to create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.
Create a user profile.
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-accountNow search for the question.Follow the link provided below to fix the damaged user profile.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile -
Original title: when closing my computer a program "" ITIBITI /. ". EXE"appears on the screen prevents the closing... the computer needed to force the point to close before I can close the computer
I don't know how to describe it better but will try.
When I select 'close the computer' page is in place ('close'). At the same time, a program called "' I T I B I T E X IE" appears on the screen. "
Receive the note that says 'close', but she will close by have by clicking on "close". I have to force it closed before I can close the computer.
I hope it's understanable.
Hey AvisTilly,
Unless you have installed a program called ITIBITI, it would be a good idea to scan your computer for malware. Run a full scan using the Scanner below the link Microsoft to see if he can identify or remove malicious programs from your system.
Microsoft safety scannerHope that helps.
-
Any help for my dumbass would be appreciated. Laughing out loud
Hi davidlangston,
What version of Windows you are running on the computer?
Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
Difficulty of broken desktop shortcuts and common system maintenance tasksNote: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.
Method 2: Run the fixit available in the article below to fix the problem automatically
When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
http://support.Microsoft.com/kb/950505
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
How to back up and restore the registry in WindowsYou might want to know
What version of the operating system Windows am I running?
http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running -
When I go to my computer, then program files it will not show me the exe files
When I go to my computer, then program files, that he will not show me the exe files, that told me what to do not have full administrator control, when I go to the page showing which is the administatrator he show me has a control total why he let me not see the exe files, it also leaves me not so far closed for my dvd writer dishes?
Try Control Panel, user accounts, click the account, make sure that its listed as 'administrator '.
close. Then, in control - panel.open 'Options records' stand & check the box 'Show hidden '.
files & folders", uncheck uncheck them next box"Hide extensions"next"Hide protected. "
files/folders", nearby... This you gives access, however, once youre thru with youre editing
or see the files/folders, you must restore default in 'Folder Options '...
-
All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.
All the ' * .exe ' programs will not start by simply clicking on the shortcut icon. I need a right click and select "Run as Administrator" to get the program to run. By clicking on the left, a box opens, which says "Windows cannot open this file: file iexplore.exe (example)". "" It then goes on to ask if I want to use the web or select a program from a list of installed programs. Is there a way to get this back to "normal"?
Hello
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be harder to detect as
the cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeSuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGERun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp?prevx=Y <-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
======================================
If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
MALWARE IS STILL PRESENT).You can try a repair install or an upgrade in Place.
You can use another DVD that aren't copy protected but you you need to own
Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
good backup or 3 (security in redundancy).On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmThis tells you how to access the System Recovery Options and/or a Vista DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-consoleHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html=======================================
For extreme cases:
Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
uses aggressive methods to detect these threats, there is a risk that it can select some
legitimate programs for removal. You should use this tool very carefully and only after
you have exhausted other options.
http://us.Norton.com/support/DIY/index.jsp================================
If you are in North America, you can call 866-727-2338 for virus and spyware help
infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
international information, see your subsidiary local Support site.Microsoft support - Virus and Security Solution Center
http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
Failed to load the exe programs or internet explorer, none of my programs work
Vista does not load the exe files and a window opens to select the program to start with, then internet explore will not work and is to expire.
Please run Doug Knox fix .exe (which is not a file .exe so you can run it) and then carefully swipe to the malware.
http://www.dougknox.com/XP/file_assoc.htm
http://www.elephantboycomputers.com/page2.html#Removing_MalwareMS - MVP - Elephant Boy computers - don't panic!
-
Problems with the .exe file programs + System Restore does not respond when you click
I have Windows Vista. This problem started a week ago. I tried at first to use my "ccleraner" already installed, but this program does not open when you click on it. I was asked to choose the program that the application to use to open it. This has also happened when clicking on itunes. My avast program when you click also asked which application is required to open it. When it finally scanned my system it does no propblems. In addition, I tried to turn on windows defendrer as he told me that it was off. Clicked on 'Turn on..' and nothing happened. Help!
Hello
See the following message to solve the problem of .exe if necessary once you are sure that the system is clean.
Try Mode safe mode with networking - repeatedly, press F8 that you start.
The best two methods allow scanners to run and/or AV.exe out of the way or removing.
1.
CTRL SHIFT ESC - task manager OR right click on the taskbar - task managerProcess tab - complete the process on AV. EXE and continue with the uninstall Guide.
If necessary use start - computer or Windows Explorer to navigate to
C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
is installed.Right-click on it and rename it to ZZMbam.COM (or something different than now), then
Double-click it and run it like this. You can rename it back later. Do the same with others
programs as needed. Use this method for other necessary - DO NOT ASSUMER one
program removes all or that there is no other malware.---------------------------------------------------
2.
Another method is to use them:Use Process Explorer to "Suspend" the process will not stop
Then use AutoRuns to delete the malicious program startup items.
Now use UnLocker to delete the files in the malware.
You may need to do a file at a time.
Process Explorer - free
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoRuns - free
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspxUnLocker - free (do not install the adaware Ebay)
http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtmlAV.exe
==============================================
There are MANY varieties of these with many names, but all can be eliminated with the same methods:
Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
scams to get you to pay for them while they have no advantage at all.How to remove all THE varieties of this malware - please read carefully the removal Instructions.
http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
in the regular when windows you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
UnHackMe execution)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download
here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
How to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp <-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
taken (such as the anti-virus software, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://OneCare.live.com/site/en-us/default.htm
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Restore the default program for the *.exe Extension
Someone has associated the *.exe (all apps) Windows Photo Viewer. Now, I can not use any application or tool that starts from an exe file. Whenever I start a program that opens the Windows Photo Viewer. Can I restore the settings so that I can use the applications?
Hello
Try the fix to the article below and check if this help.When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
http://support.Microsoft.com/kb/950505Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
After building the .exe program not found .vi (mine or the dependencies OR 'standard')
Nuub alert! Could not find a tutorial for extreme nuubs on this... Tutorial for NOR tried, but it still happens. LabView 2011/XP Pro. Nothing other than LabView - no DAQ or materials.
I have designed a new Board of Directors, developed a RS232 interface and wanted to build a LabView graphical user interface. Usually used Visual Basic (eye-popping stop!). Follow-up to tutorials to create 'tree' in the file project (Public/private/etc.). I have about 10 vi Omnium who-> get or set data-> close. These vi uses a lot of several standard timers, manipulating strings, Labview etc integrated. Followed the tutorial OR for the generation of pilots.
I did a first level vi called for EXAMPLE with a button to call sub - vi, display data, etc. When I created the build, I send EXAMPLE.VI to start and the .lvlib. to include. When the exe file is run, it is not some subvi and can not find the built-in vi (as trim_whitespace', simple_error_handler', etc.). It seems that my prob is double (dependencies & my sub - vi)? I tried throw everything in - big mistake - commissioning all 10 sub - vi complained about not finding things, took me about 15 minutes to close everthing.
I can see the list of dependencies in the Project Explorer; but nothing shows in the 'properties' of the construction to ensure that they added.
Y at - it a basic tutorial to create a .exe since a vi (which is built from many subvi), which deals with how ti get the included dependencie in the compilation? Still on the subject, I found tons of tutorials, books, etc. on how to use labView in 2011, but zero on the side 'pilot' - I don't want be a LabView expert like you guys, just learn how to create the basic vi to create good drivers for my instruments I design
Thank you!!!
SteveIt's noob, not nuub.
You said that when you configure the build you 'sent' Example.vi 'start-up', but I don't see that. None of the specifications of your generation have a start VI. You have also 4 plug different construction, so I have no idea who you're talking about.
Standard screws are not included in an application. They are drawn in via the LabVIEW runtime engine that will have these libraries. You must make sure that the target computer receives the LabVIEW run-time engine installed as well as NI-VISA (you use VISA).
General code comments:
- Overexploitation of the structures of the sequence. Most of those you are not even necessary. Others can be removed by making use of time delay VI, which has cluster of error to force the dependency data.
- Overexploitation of local variables.
- It's a bad idea to incorporate the mistake single VI Manager dialog box into subVIs. The Subvi should be called in your top-level VI.
- Connector model use the classic 4-2-2-4.
- Assignments pane classic following connector. VISA references top-left and upper right. Error clusters lower left and lower right.
-
Original title: MIcro Cookbook 5.5 install problems on Windows 7
When I try to install a recipe program I get this message. This version is not compatible with the version of windows that you are running. Check the system information of computers to see if you need a x 86 (32 bit) or a or x 64 (64-bit) version of this software and then contact the editor. I knew how to do this job of file transfer to the 32 bits of the 64 folder, but it won't let me install the program. This software is no longer made. The program is Micro Cookbook 5.5
Do not transfer you files x 86 or x 64, that simply do not work and other issues.
The program is designed for Windows 9, and if you have a version of win7 64 bit and the origonal is a 16-bit program, which she may very well, it will not install or run on 64-bit PC, so err msg you see.
If the installation of the drive try this, locate the setup.exe, rt click & Select compatibility and select Windows 9 *.
Maybe you are looking for
-
You can use Skype credit to make calls without wifi?
Hello so my question is this. I'm really far from were I live and I don't want to make a cell phone plan, I don't think I'll have wifi, a friend told me I should try using Skype and Skype credit purchase, so my question is. Can make you calls using S
-
HPEnvy 7640 HPScan 4.6.0 (36): HP Scan not saving docs after update OS El Capitan
I've just updated to El Capitan (Mac OS 10.11). I use HP Scan and my scanner working properly until the moment when I want to save the scanned document. Then I get error message saying: "unable to save scanned items. An attempt to save the documents
-
Issue of QWERTY keyboard backlight
Does anyone else has had a problem with the backlight on the keyboard do not stay while you type? Sometimes it seems that they will not stay while I'm typing a text or an email. I was wondering if there is a way to make them until im done typing or w
-
Update t area MS started with 0xC800042D - FixIt using I get there as the problem but no sugestion to fix?
-
How to access the games of hearts, Minesweeper, free cell, Solitaire, Spider Solitaire
Games provided with the program XP Feel free to change the title I can't access my solitaire spider solitaire, cell, Minesweeper and hearts games. How can I get back them?