Similar Questions

• Online image are not not under the line of text above it

  I'm laying the pictures in a text box in InDesign and there are times where the image I put down this line of text quite where it the image is not overlap any text. And there are other times when the image does not move down enough and he ends up falling on top of text. After some trial and error, I realized that the paragraph style that is attached to the paragraph where sits the image is what affects this behavior. I just can't understand what in this style is causing that. I hope that makes sense. I have attached pictures to explain what is happening.

  In this first picture you can see that the paragraph mark is sitting in the lower corner of the image. The 'faq answer' paragraph style is applied here, and the image is located below the line of text.

  

  In this example, the same paragraph has the "topic" paragraph style applied, end-to-end it image overlaps the text above it.

  

  In the first case that anchored the line spacing of the paragraph with the image has the value auto, in the second, she has a fixed value.

• Slideshow in the cell of the table and text in layer above images

  I need to create a slide show in

  a table cell (a cell of several).  The

  display should begin only once the pitch page has been fully charged and only appear once.  Also, it takes the text in a layer above the the slide images that change with each slide but is generated independent of each slide and can therefore be placed in the cell independently.

  Anyone?

  Take a look at this slideshow fade-in.

  http://www.dynamicdrive.com/dynamicindex14/fadeinslideshow.htm

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• The substitution of text running header Variable

  When you override a running header text variable, is it possible to keep this header "running"? I needed my head to two lines so I made a substitution, but now it is not flow with the rest of the text. He became a fixed header?

  N ° when you convert a text variable, it's no like "variable".

  You can try and wait until your layout is completely finished before converting text tot.

  FWIW, multi-line headers is one of the benefits of power headers...

  Substances

• The substitution of text in table headers

  Hello

  I'm working on a document in CS3 where a table flows across columns. I want to put 2 header lines appear in each column, but I was wondering if it will be possible to have this, but to replace the text in one of the headers (this is the style of line, I repeat, not the text, which should say "blah blah blah" in the first column, then 'blah blah blah' continues in the following columns)?

  Anyone know if this is possible? I was hoping to avoid mobile lines around text in the tables is subject to change.

  Thanks for your help

  See you soon

  Deb

  Table > table Options > headers and footers > header repeat: each column of text and then check the first Skip button.

  This way you can set the first column the way you like it and then set up the second column as you like all the rest.

  Ken

• Substitution of text in the Terminal

  The feature of substitution of text in Mac OS X is an interesting and useful feature. I see that we can use this feature in applications such as TextEdit. However, is there a way that we can use this function in the terminal application?

  I use this feature of system preferences > keyboard > text

  OS: Mac OS X El Capitan

  I can't imagine what you're trying to do.

  If, for example, you try to insert the symbol ½ on the line of your terminal, you can use the menu of the Terminal to go to Edition > Emoji & symbols and insert it there.

• Hello! I am a beginner Photoshop - how I 'color above' text on a jpeg image - then match the color background - then retype the new text above? If someone can give me really basic step by step intstructions - I would be happy!  With our thanks!

  Hello! I am a beginner Photoshop - how I 'color above' text on a jpeg image - then match the color background - then retype the new text above? If someone can give me really basic step by step intstructions - I would be happy!  With our thanks!

  Hi Donnas,.

  Content-aware fill is your best friend in this case.

  Just make a selection around the word and go to edit-> Fill-> Content-Aware.

  This usually done a very good job.

  Then you can either return to it several times (maybe in smaller sections) with Content-Aware fill to clean it, or you can play with the Spot Healing Brush tool (J) or the tool clone stamp (s).

  Please see the following link for more information 3 ways to delete the text to a picture in Photoshop - wikiHow

  http://www.WikiHow.com/add-text-in-Photoshop

  Let us know if it helps.

  Concerning

  Sarika

• Script to remove all the images, text blocks, and the page numbers on a layer

  I have a 364 pages with 322 illustrations, photographs mainly, for offset printing.

  The photographs will be be overprinted with the varnish on a plate in the fifth, and I set it up as follows:

  On a new layer, (double layer 1) all photos are removed, but not their mounts.

  The frames are then filled with 100% black.

  All text blocks and page numbers must also be deleted.

  I realize I could have done this job easier if I put all the images on their own layer first, but unfortunately I do not have.

  And I don't do myself, script, so I was wondering if anyone has a script that will do...

  With the help of CC 2015.1 on Windows 7.

  Today, I don't have time to finish, which gave time to until now is the following:

    var myDocuments = app.documents.everyItem();
      var myLayers = myDocuments.layers.everyItem();
      var myStories = app.activeDocument.stories.everyItem().getElements();
      var myDoc = app.activeDocument;
      var myLayer = "palette"; //Add your layer name here
      var NewLayer = myDoc.layers.item(myLayer).duplicate();
      myDocuments.pageItems.everyItem().locked = false;
      myLayers.locked = false;
      myDoc.layers.item(myLayer).visible = false;
      NewLayer.name = "SampleNew";    //Add your new layer name here
  
                  re();
                  function re(){
                      var link, image;
                      var openDocs = app.documents;
                      var openDocsLen = openDocs.length;
                      for (var d = 0; d < openDocsLen; d ++){
                      currDoc = openDocs[d],
                      links = currDoc.links,
                      counter = 0;
                      myLayer.locked = true;
                      myDocuments.layers.item(myLayer).locked = true;
                          for (var i = links.length-1; i >= 0; i--) {
                              if (links[i].hasOwnProperty('relink')) {
                                  try {
                                      link = links[i];
                                      image = link.parent;
                                      image.remove();
                                      counter++;
                                  }
                                  catch (err) {
                                      $.writeln(i + " - " + err);
                                  }
                              }
                          }
                      }
                    }
  
          var myStories = app.activeDocument.stories.everyItem().getElements();
          for (i = myStories.length - 1; i >= 0; i--){
              var myTextFrames = myStories[i].textContainers;
              for (j = myTextFrames.length - 1; j >= 0; j--){
              myTextFrames[j].remove();
              }
          }
  

  If nobody finished the second finalized.

  Hug!

• layer of the static objects/text on top of the interactive elements

  is it possible to static objects/text on top of the interactive elements (including the scrolling slideshows or MSO) layer in INDD CC for DPS/Content Viewer?  Static objects (on their own layer) disappear when read on tablet in Content Viewer

  N ° so-called overlays for a reason.

  You must convert any static object on an interactive object to stack on top. You can do this by converting a MSO and setting to play once with no delay and no fade chained.

• change the color of text blocks only the active layer

  Well my script to change the color of the text frame changes the color of all the blocks of text hidden or not.

  I need to change only the visible text blocks.

  If (app.documents.length > 0) {}

  newCMYKColor = new CMYKColor();

  newCMYKColor.black = 0;

  newCMYKColor.cyan = 0;

  newCMYKColor.magenta = 0;

  newCMYKColor.yellow = 0;

  for (i = 0; i < app.activeDocument.textFrames.length; i ++) {}

  textArtRange = app.activeDocument.textFrames [i] .textRange;

  textArtRange.characterAttributes.fillColor = newCMYKColor;

  }

  }

  Any ideas on how the way only change the color of the text on the active layer blocks? In the final script I want to hide all other layers so if it could be done by a visible attribute more easily that would work just as well.

  Thank you

  Duane Leach

  Hello

  It will work for you?  Have not tested much beyond text blocks in groups and those who are just stand-alone on the layer.

  If (app.documents.length > 0) {}

  var thisDoc = app.activeDocument;

  newCMYKColor = new CMYKColor();

  newCMYKColor.black = 00;

  newCMYKColor.cyan = 40;

  newCMYKColor.magenta = 50;

  newCMYKColor.yellow = 50;

  Need to retrieve blocks of text within the groups on the layer.

  var artSel = thisDoc.activeLayer.groupItems;

  for (i = 0; i<>

  If (artSel [i] .hidden == false) {}

  var text = .textFrames artSel [i];

  for (j = 0; j<>

  text [j].textRange.characterAttributes.fillColor = newCMYKColor;

  }

  }

  End to change the rest of the outside groups text boxes.

  var textArtRange = app.activeDocument.activeLayer.textFrames;

  for (k = 0; k<>

  If (textArtRange [k] .hidden is false)

  textArtRange [k].textRange.characterAttributes.fillColor = newCMYKColor

  }

  on the other

  Alert ("it is not any open documents to change...");

• Delete the layer and fill the empty place in the timeline with layers above

  Hello

  When I delete a layer of AE CS5.5, is there a way I can get all the other layers above him to retreat and to fill in the empty space in the timeline, without physcially having to pass them all?

  Not automatically.  But you can do this:

  Place the cursor in the timeline to the place where you first layer to begin once that everything is moved.

  Click on the layer immediately above the layer you want to delete.

  Shift-click on the upper - layer you have selected now all layers above the one to delete.

  Maj-do drag the selected layers.  They will align with the point where the cursor of the timeline.

  Once you have verified that all is well, delete this undesirable layer.

• fade in the text with layer styles

  I try to have the letters in a Word to fade slowly upward. I have the layer text, added a few styles of layer (stroke, bevel, shadow) and then to apply the preset animation / text / animate in / fade up by letter.  However, which fades to the top are the styles first for each letter. The first appearance of each letter is the color of the outline, and then other styles are added slowly until the end of each letter.  I want each completed letter to fade slowly upward. I couldn't find any setting of host who could achieve.  Any ideas?

  I think the only thing that is causing problems is the race. Try adding the race using the palette of characters instead of the layer styles. Now, if you simply add a host of opacity for the text layer, set the opacity to 0 and animate the range selector you should have what you want.

• How to draw text above a picture

  Hello

  How do I draw text above an image. It will work - substitution of the paint the field and using drawText (0, -10) method.

  -10 means that the text will be drawn 10 pixels above the image.

  It depends on the method you are using:

  If you decide to drawText in the charts (the hard), you would be better to check the length of the text before drawing it (getFont () .getAdvance (text), is what you will use for this), in the positioning of your custom field. This can become quite complicated, especially if you are concerned about the return to the line and other things.

  If you go to VerticalFieldManager approach and want the text field to wrap text properly, use, say, RichTextField for this BitmapField for your image and ensure that they have the style flags you can (for example, say, FIELD_HCENTER for centering them vertically; there are a of others, but you do not have to worry with them now) IMHO). In this way, that everything will be done automatically for you. And, as I said before, VerticalFieldManager respect the margins of fields.

• How to change the angle of a gradient layer without changing anything else?

  How to change the angle of a gradient layer without changing anything else?

  When I try it myself my gradient everything turns black.

  To add to the above, you can just set the angle. If you want to use other existing parameters, you need to get from the layer. The code in this other thread shows a way to get them.

  But if you do not have the values for any other reason, you can get the handle to the layer, make a duplicate of it with all the settings and just crush those you want to change.

  It is a way to just change the angle while keeping the other existing settings.

  // helper function for working with descriptors
  function getProperty( psClass, psKey, index ){// integer:Class, integer:key
      var ref = new ActionReference();
      if( psKey != undefined ) ref.putProperty( charIDToTypeID( "Prpr" ), psKey );
      if(index != undefined ){
          ref.putIndex( psClass, index );
      }else{
          ref.putEnumerated( psClass , charIDToTypeID( "Ordn" ), charIDToTypeID( "Trgt" ) );
      }
      try{
          var desc = executeActionGet(ref);
      }catch(e){ return; }// return on error
      if(desc.count == 0) return;// return undefined if property doesn't exists
      var dataType = desc.getType(psKey);
      switch(dataType){// not all types supported - returns undefined if not supported
          case DescValueType.INTEGERTYPE:
              return desc.getInteger(psKey);
              break;
          case DescValueType.ALIASTYPE:
              return desc.getPath(psKey);
              break;
          case DescValueType.BOOLEANTYPE:
              return desc.getBoolean(psKey);
              break;
          case DescValueType.BOOLEANTYPE:
              return desc.getBoolean(psKey);
              break;
          case DescValueType.UNITDOUBLE:
              return desc.getUnitDoubleValue(psKey);
              break;
          case DescValueType.STRINGTYPE:
              return desc.getString(psKey);
              break;
          case  DescValueType.OBJECTTYPE:
              return desc.getObjectValue(psKey);
              break;
          case  DescValueType.LISTTYPE:
              return desc.getList(psKey);
              break;
          case  DescValueType.ENUMERATEDTYPE:
              return desc.getEnumerationValue(psKey);
              break;
      }
  };
  function duplicateDescriptor( descriptor ) {
      var newDescriptor = new ActionDescriptor;
      newDescriptor.fromStream( descriptor.toStream() );
      return newDescriptor;
  };
  function localizeDescriptor( desc ) {
      var stream, pointer, zStringLength, zstring, localized_string, newZStringLength, previousStream, followingStream, newDesc;
      stream = desc.toStream();
      while( true ) {
          pointer = stream.search(/TEXT....\x00\$\x00\$\x00\$/);
          if( pointer === -1 ) {
              break;
          }
          zStringLength = getLongFromStream( stream, pointer + 4 );
          zstring = readUnicode( stream.substr( pointer + 8, ( zStringLength - 1 ) * 2) );
          localized_string = ( localize( zstring ) ) + '\u0000';
          newZStringLength = localized_string.length;
          previousStream = stream.slice( 0, pointer);
          followingStream = stream.slice( pointer + 8 + zStringLength * 2);
          stream = previousStream.concat( 'TEXT', longToString( newZStringLength ), bytesToUnicode( localized_string ), followingStream );
      }
      newDesc = new ActionDescriptor();
      newDesc.fromStream( stream );
      return newDesc;
  };
  function getShortFromStream( stream, pointer ) {
      var hi, low;
      hi = stream.charCodeAt( pointer ) << 8 ;
      low = stream.charCodeAt( pointer + 1 );
      return hi + low;
   };
  function getLongFromStream( stream, pointer ) {
      var hi, low;
      hi = getShortFromStream( stream, pointer) << 16;
      low = getShortFromStream( stream, pointer + 2);
      return hi + low;
  };
  function readUnicode( unicode ) {
      var string = "";
      for( i = pointer = 0; pointer < unicode.length; i = pointer += 2) {
          string +=String.fromCharCode( getShortFromStream( unicode, pointer ) );
      }
      return string;
  };
  function longToString( longInteger ) {
      var string;
      string = String.fromCharCode( longInteger >>> 24 );
      string += String.fromCharCode( longInteger << 8 >>> 24 );
      string += String.fromCharCode( longInteger << 16 >>> 24 );
      string += String.fromCharCode( longInteger << 24 >>> 24 );
      return string;
  };
  function bytesToUnicode( bytes ) {
      var unicode = "", char_code, charIndex;
      for( charIndex  = 0; charIndex < bytes.length; charIndex ++ ) {
          char_code = bytes.charCodeAt( charIndex );
          unicode += String.fromCharCode(char_code >> 8 ) +  String.fromCharCode( char_code & 0xff );
      }
      return unicode;
  };
  
  function setGradientAdjustmentAngle( angle ) {
      var adjustmentDesc = getProperty( charIDToTypeID("Lyr "), charIDToTypeID( 'Adjs' ) ).getObjectValue(0);
      var newAdjustmentDesc = duplicateDescriptor( adjustmentDesc );
      newAdjustmentDesc.putUnitDouble( charIDToTypeID('Angl'), charIDToTypeID('#Ang'), angle );
  
      var desc = new ActionDescriptor();
          var ref = new ActionReference();
          ref.putEnumerated( stringIDToTypeID('contentLayer'), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
      desc.putReference( charIDToTypeID('null'), ref );
      desc.putObject( charIDToTypeID('T   '), stringIDToTypeID('gradientLayer'), newAdjustmentDesc);
      executeAction( charIDToTypeID('setd'), desc, DialogModes.NO );
  };
  var newAngle = 45;
  setGradientAdjustmentAngle( newAngle );
  

• Always enter the ends of text - but I want the crossings of line!

  Hello everyone. I was on the lookout here the half year past - as long as I've been programming in Labview, and now it's time to make my first post.

  The problem is a minor (but boring!) and probably a quick fix: I'm unable to add line breaks in text with the button enter. Pressing enter always ends the typing. That is to say: I can't make a comment in the comics with line breaks!  I can always resize and it will behave as expected, but resizing is not, in many cases, to break the lines as I want.

  

  So, as shown in the example above, I have to constantly switch between the KB and mouse to make a list.

  Change the "Entry of text end with the Enter key" box in tools-> Options-> environment has no effect - even after rebooting, so I'm out of ideas, but I hope that someone on this forum have had the same problem and solved.

  I use LV 8.6.1 on Vista.

  The numbad enter acts in the same way as my main entry.

  But you put sent me in the right direction: if I disable the numeric keypad - then my 'main' enter start producing line breaks.