Is there a C or CPP interface for Profibus PCI card OR program?

Similar Questions

• What type of interface for my graphics card for M9400z

  I have a M9400Z.  The video card failed yesterday.  What type of video PCI interface card should I buy for replacement?

  Here are the specifications of your desktop m9400z CTO. Based on the specifications, the existing video card is of type PCI Express x 16 (PCIe x 16). The power supply provided with the system is rated at 350 watts. So, you will need to buy a PCIe x 16 video card with a requirement of system recommended 350 Watt power or less.

  Frank

• For CQ5826 PCI card

  Can what cards I put in Add a serial port to my pc?

  Need a serial port on my garmin 162 gps talk.

  Running windows 7 64 bit.

  New cable converter USB to serial adapter with FTDI chip installed and worked with Windows 7 64 bit.

  Garmin Gps connectted & contacted flawless software.

• Why is there no user interface for moving the cache locations/profile?

  OK, so it took me a long time to find how to move the location of the cache and the reason is that it is done by an entry that does not exist originally, so a user need to know the channel config even magically set it.
  (this is browser.cache.disk.parent_directory for those in the same waters as me) and it still did not move the location of the profile...
  To change your profile location? The doc only that talks on this subject here:
  http://KB.mozillazine.org/Moving_your_profile_folder
  and it does not work so well for me (i.e. all) but why have I not copy and change things? It is created automatically the first time you start so FF cannot use the same method to create a new profile in an empty space?

  And my real question: is there a valid reason, that there is no element of the user interface to set the location of the profile cache directories?

  There never was a user interface for these parameters - Mozilla is "stingy" about adding prefs that will be only once required by the installation of the user interface. Also, I assume that the developers are convinced that a power user who thinks that even on the displacement of the cache will be searching for instructions on how to do it. (BTW, when you move the cache profile is moved to the folder path profile, its origin "local settings" folder - thus it is automatically moved out of APP DATA.) You can still use this pref to put the cache exactly where you want. I use a small partition for the TEMPORARY files and the cache of Firefox, so they don't one of my biggest readers logics frag.)

  Regarding the difficulties with a profile in motion, developers have threatened to remove Firefox profiles altogether for the last 3 years or 4 and WONTFIX had no Bug filed all improve or add new features to the Profile Manager. This will probably happen this year some time.

  Between you and me, there is a new Profile Manager application just went Beta, which will probably "be released" just as the existing profile manager is extracted from Firefox. It is very schweet and is always at the point where the developers are in response to reports of bugs on features to include and adding the items that are important. I have tabled a minor Bug on the characters allowed in a profile name, which was fixed in 3 or 4 weeks.
  
  https://developer.Mozilla.org/en/Profile_Manager
  
  https://wiki.Mozilla.org/Auto-Tools/projects/ProfileManager
  
  http://FTP.Mozilla.org/pub/mozilla.org/utilities/ProfileManager/1.0_beta1/
  
  You must have Windows Visual C++ 2010 redistributable installed for the application of the Profile Manager XUL Runner to work right now. I hope that this will change very soon, and all the necessary files will be included in the Zip package.

• vSphere "There is no device for the PCI Passthrough on the host"

  Hey all,.

  I use a trial version of VMware vSphere 5.1 on a server Dell T - 410 Quad Core - w - 32 GB of RAM.  I'm not under vCenter.  I installed this after attending a class on VMware vSphere there and now I'm just using it because I need to study the materials of many moons.  I left 40 days on the assessment.

  I'm trying to add support for a PCIe card in VMware vSphere for a Linux CentOS client.  (Note that all customers react in the same way).

  When I click on the Client and then 'change settings' > I see the dialog window 'Properties of the Virtual Machine' and the Add button.

  When I click on ADD, I see the following:

  "PCI Device (not available)".

  By clicking on the PCI device in gray reveals that:

  This device cannot be added to this virtual Macine because:

  There is no device for the PCI Passthrough on the host

  ---------------------------------

  I have looked in a number of places but haven't seen any clear information about how to ADD a PCIe or PCI peripheral Passthough.

  Can you tell me messages of the Forum or Documentation for this operation?

  I run a vCenter evaluation copy to pull this off?  (And there are copies of assessment of vCenter even?)

  Thank you

  Tommy

  Select the host, and then you will see the configuration tab.   Advanced settings is at the bottom left.

  OK just see your message... good luck!

• firewire iEEE1394 for pavilion p62125 card

  Hello, I'm looking for a pci card that will work with my Pavilion p62125.  I have a camcorder Panasonic that I try to get the video off of and my pc does not have dv or ports d-link.  I have a hub, but it does not work.  I need a port for a firewire iEEE1394.  Thanks for any help you can offer.

  What you need is an Express of PCE x 1 1394 firewire adapt card to install in one of the PCI Express x 1 slots you desktop PC.

  Here are examples at NewEgg.com

• Data acquisition using the USB-GPIB 82357 B interface for 4395 impedance Analyzer has:

  Hi all

  I tried to communicate Analyzer 4395A impedance with interface USB GPIB 82357 B using the command of expert keysight and Labview module tutorial. I couldn't able to find orders of SCPI (Standard for programmable Instruments orders) for 4395 A impedance Analyzer in the expert keysight command. Please help me on the subject of what are the other possibilities to acquire data from the Analyzer of impedance 4395 A using the interface USB GPIB 82357 B.? Is it possible to get LABVIEW plug & play drivers for USB-GPIB 82357 B interface? Our main goal is to control the parameters of impedance measurement and draw F vs IZI and theta vs F as well as get parameters of equivalent circuit on a PC with LABVIEW GUI.

  Can't wait to help.

  Hello!

  I agree with 'heavy '. For more information on how to program a 3rd device contact the manufacturer because they have the knowledge. Unless there is already a LabVIEW driver for this device, you would have to implement that yourself and need information from the manufacturer.

  Regarding your question if the GPIB-USB is unsuitable, it is quite easy to answer: If you want to communicate with a peripheral GPIB NI GPIB-USB can do this. But you would probably need a driver to use the GPIB of meaningful communication bus.

  Best regards

  Christoph

• Will there be an improvement in performance for webworks?

  Will there be an improvement in performance for webworks in SDK 2.0?

  It's too slow,

  my app needs 2 seconds to start

  1.5 seconds to him splash screen that I can not turn off

  0.5 seconds for a white bbui and init-display web pages

  It's all just too slow.

  and when the application runs, the bbui animation sometimes lag

  You can see that is not smooth enough to call him a native application.

  will there be an improvement?

  or I have to go to Casades / native for better performance?

  There is actually some performance enhancements in the Beta SDK. It is unlikely to be noticeable, unless you load a large number of plugins or make frequent API calls.

  To add to Erik's comments on the start screen. The API of SplashScreen Cordova eliminates the need to have a 'fake' splashscreen in place while the user interface infrastructure is initializing.

  webworks plugin add org.apache.cordova.splashscreen
  

  Then in the config.xml file:

  Now you have full control on when the splash screen is hidden:

  navigator.splashscreen.hide();
  

• Model of User Interface for interactive report region

  3.2 where we establish the model of user interface for interactive reports region?
  
  No matter what on the theme of the box I go to, the region of interactive reports shows the same. What and where do I change the model so that alternate lines use two different colors?

  There is no model for interactive reports as for a 'normal' report You need to edit the CSS and provide your own for this purpose.

  I think that most of the things are marked with the #apexir - firebug with combustion chamber is priceless. This thread may help:

  Re: changing the appearance of the interactive report.

• External interface for overall activity

  Hi all
  
  Another question: a global activity can launch an external user interface?
  
  I'm able to run our application J2EE as a user interface for interactive activities (external) normal pages, but with a global activity I do not seem a possibility to specify my custom URL...
  
  Thank you
  Igor
  
  P.S. I'll miss points at this rate? :)

  Hi Igor,.
  It is not possible to implement a global activity as external in the same way you would with an interactive activity. However there is a solution that I put in place in some clients this is to implement the world with a screenflow and to the screenflow redirects to your external application.
  If you need additional information on this implementation, I can share with you.
  HTH

  Published by: ruben.vidaurre on 30-sep-2009 15:23

• The compass is out of 90 degrees. Is there a software patch or calibration for this?

  The compass is out of 90 degrees. Is there a software patch or calibration for this?

  See section reset or disable location Services of privacy and location in 8 and later - Apple iOS Support Services. Back to zero must recalibrate the compass.

  TT2

• Is there a safe reliable malware protection for OS10.11.5 software?

  Is there a safe reliable malware protection for OS10.11.5 software?

  The only safe and reliable malware protection is common sense. Practice safe computing habits and you'll be fine.

  Your Mac to protect except if replace you its protection plans, do not install updates via the App Store when prompted or fall for scams via the web or e-mail:

  http://www.Apple.com/OSX/what-is/security/

• Apple a day will include Messages in the web interface for iCloud?

  Hello world

  That I really like to write my text Messages on my iMac and MacBook Pro, I was wondering if, one day, we will be able to send text messages from the web interface for iCloud.

  I mean, the 'Messages' application might appear with all the others.

  

  During my short time with an Android phone, I used text powerful app. I had to associate the application phone on a Google account and connect to the web interface powerful text with the same Google account.

  It was pretty cool and useful.

  So, I'm thinking the solution to include 'Messages' to iCloud so that non-iMac users could write SMS with their keyboard too.

  THX.

  This is a user to user community, Apple will not read your comments, if you have any suggestions that you think might improve iCloud, you can send Apple your your comments here.

• When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. "Help, please.

  When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows
  Installation package. A program required for this install to complete could not be run. "Help, please.

  Hello..

  Try this support article > If you see an error message "Windows package install" when you try to uninstall iTunes from your PC

• Sometimes of firefox loads a page slowly with a single click, but if I double click it loads very well? Is there a reason or a fix for this? Overall, I really like Firefox. I always use the latest beta version.

  Question
  Sometimes of firefox loads a page slowly with a single click, but if I double click it loads very well? Is there a reason or a fix for this? Overall, I really like Firefox. I always use the latest beta version.

  Hi Jlhillhouse,

  It is difficult to solve the problems of the computer without knowing all the details. You should look at the link I sent you and especially to Firefox is slow - how to make it faster. I don't know any known issue as you describe, it's probably a very good bet for a response.