Is there a correct configuration of network for the ESX host computers
Have a VC server and 2 ESX 3.5 hosts. Each host is filled with 6 cards.
Three VLANs are created:
The VM network for traffic Server
Vmotion: for Vmotion traffic
Management VLan: For traffic management
The network adapters on each host have been assigned as follows:
2 network cards - the VM network
2 NICs - Vmotion & Service Console
2 NICs - ? How can I use them for? Service console?
What I am doing wrong?
Yes, #3 is required for vmotion vmkernel type. Then that VLAN allows them to route in the end, it is not necessary for them to communicate. and Yes, SC is the management network
Tags: VMware
Similar Questions
-
Add more disk space for the ESX host
Hi all
I need to throw more disk space to my ESX hosts. I know how to bind records in Navisphere and present to the ESX host. Once in the VI client, I "think" I need to go to the host and do a rescan of the HBA or something like that? I'm a little unsure of the market of part VI to add more disk space. Could someone just point me in the right direction? Please note that I am looking to add more disks to existing hosts in existing clusters. It adds no storage to a new host... rather an existing one.
Thank you
Jonathan
You are on the right track. Re-scan storage card, under the configuration tab select storage adapters, select the adapter and click on the link of the new analysis. Then go to the storage section and there should be a link in the top right of the screen that says storage Add. Click on that and it will guide you in adding/setting in form/naming of the new disk.
-
Good afternoon
I've updated our ESX host using the Update Manager and ran into a problem with one of the servers. Update Manager was at a standstill when applying patches to a particular host, so I advanced and tried to manually apply patches. I get the following error:
INFO: No repository URL specified, goes with file:///temp/April/ESX350-200904405-BG
INFO: configuration...
INFO: Preparing to install...
INFO: The following RPMS are already installed on the system and will be ignored:
INFO: Download of the kernel-vmnix - 350.2.4.21 - 57.EL.158874.i686.rpm...
INFO: Checking of disk space and running test transactions...
NEWS: In courses run yum install & lt; 1 packages and the gt;...
INFO: | Collection or file header information from Server (s)
INFO: | Server: Bundle ESX350-200904405-BG
INFO: | Research update of packages
INFO: | Download required headers
INFO: | Resolution of dependencies
INFO: | Resolved dependencies
INFO: | I'll do the following:
INFO: | Update: kernel-vmnix 350.2.4.21 - 57.EL.158874.i686
INFO: | Download of packages
INFO: | Getting the kernel-vmnix - 350.2.4.21 - 57.EL.158874.i686.rpm
INFO: | Running test transaction:
INFO: | Test the complete transaction, success!
INFO: | kernel-vmnix 100% is 1/2
INFO: | error: unpacking of archive failed on file /boot/System.map-2.4.21-57.ELvmnix;4af1aefd: cpio: open
INFO: | Update: kernel-vmnix 350.2.4.21 - 57.EL.158874.i686
INFO: | All transactions
INFO: Yum can't install the new pkgs
INFO:-TOTAL: 0 packages installed, 1 hold or failed, 0 deleted, 0 excluded.
ERROR: An error occurred during installation or removal of packages.
ERROR: See /var/log/vmware/esxupdate.log for more details.
ERROR: Failed to upgrade. Class of error: vmware.esxupdate.errors.IncompleteUpgradeError
* I then went ahead and checked the file /var/log/vmware/esxupdate.log and this is what I see *.
INFO: yum. Download required headers
INFO: yum. Resolution of dependencies
INFO: yum. Resolved dependencies
INFO: yum. I'll do the following:
INFO: yum. Update: kernel-vmnix 350.2.4.21 - 57.EL.158874.i686
INFO: yum. Download of packages
INFO: yum. Getting the kernel-vmnix - 350.2.4.21 - 57.EL.158874.i686.rpm
INFO: yum. Running test transaction:
INFO: yum. Test the complete transaction, success!
INFO: yum. kernel-vmnix 100% is 1/2
INFO: yum. error: unpacking of archive failed on file /boot/System.map-2.4.21-57.ELvmnix;4af1aefd: cpio: open
INFO: yum. Update: kernel-vmnix 350.2.4.21 - 57.EL.158874.i686
DEBUG: session: check the status of the 2 rpm...
DEBUG: install: package name match 2 and 1 SORRY
DEBUG: session: install hangs: kernel - vmnix.i686
DEBUG: session:--1 Total pending 1 installed 0
INFO: Summary: Yum can't install the new pkgs
DEBUG: install: install cleanup...
DEBUG: System: LogCommand (rm-f etc/vmware/esx.conf.WRITELOCK)
DEBUG: System: LogCommand (rm-f/var/lib/rpm/__db *)
INFO: Summary:-TOTAL: 0 packages installed, 1 hold or failed, 0 deleted, 0 excluded.
ERROR: says: an error has occurred during installation or removal of packages.
ERROR: States: see /var/log/vmware/esxupdate.log for more details.
DEBUG: lock: lock /var/run/esxupdate.pid deleted file
DEBUG: root: Final report: Niveaurecuperation
ERROR: root: failed to upgrade. Class of error: vmware.esxupdate.errors.IncompleteUpgradeError
Any help would be appreciated
Sorry... no other idea.
Just to be sure that try to create a file in / Boot to see if you have a few mistakes... also check if you have I/O error with dmesg command (see bottom).
André
-
Is there a cable that has a configuration of PIN for the printer and a USB for PC connector?
I recently bought a HP Pavilion p6620f desktop PC to replace my HP Media Center PC m1270n desktop computer, which has stopped working. I have a HP OfficeJet K60xi all in one printer fax scanner copier that has been the cable connected to the old PC. The end of the cable does not match any of the places to go on the new PC. Can you please tell me how to connect the printer to the new PC? Is there a cable that has a configuration of PIN for the printer and a USB for PC connector?
Please see: installation of the product with the USB cable and using the driver from Windows Update or the driver located in the Windows 7 operating system and HP USB 2.0 cable to the printer.
-
32-bit o/s. Vista Home Premium. All scans/checks indicate no problems
"Updates were not correctly configured. Restoration of the changes. ....." Advice please?
M/S Rep told me that the (free) support for Vista is no longer available. Could the problem of security identified in the software of M/S already affected my system (published 12/10/2013 refers)?
Hello
I wish that refer you to this article-
https://support.Microsoft.com/kb/949358/en-us
Note: Make sure that you get the computer back to the Normal start once you have completed the troubleshooting steps.
Make sure that you back up the data on the computer before you continue.
Thank you.
-
Is it safe to use Safe Mod with networking for the use of the computer every day?
Hi, my computer has problems to start normally and I was wondering, is it safe to use Safe Mod with networking for the use of the computer every day? I use the computer like 10 hours + every day. Is this correct and safe? Thank you
Hello, Winston,
It is actually for troubleshooting only.
Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.
Some applications may not work properly or not at all if you use safe mode with networking for everyday computing.
Wireless network adapter may not work when you use the Option "Safe Mode with network.
http://support.Microsoft.com/kb/305616
Safe mode disables most of the processes and services running. These services include the Windows Update service. »
-
Is there a method of direct printing for the chiseled section?
Original title: Snipping Tool
I love this tool and use it quite often. Have I missed something but, for when I want a copy of the capture, I go to Word and paste the snip in a new document, where it can be printed? Is there a method of direct printing for the chiseled section? Otherwise, would be MS please consider including it? Are there other supported this idea, if any?
Pelcaro
Hello
Correct the Snipping Tool doesn't have a print option.
Use these resources to provide feedback:
Microsoft Connect
https://connect.Microsoft.com/Provide feedback to Microsoft
http://www.Microsoft.com/mscorp/Execmail/feedback.mspxI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
Why is there not a profile of ACR for the Nikon 800 mm f5.6 E FL VR optical?
Why is there not a profile of ACR for the Nikon 800 mm f5.6 E FL VR optical? He has been out for 2 years or more. A profile for the much newer f4E 600mm FL VR lens is already available.
There is no profile for the 800mm lens. Indeed most of the downloads seem to have enough old-maybe even non-AF-lenses. So, I guess my only option is to wait.
-
Download Avatar (limit of 500 KB) - is present but there is no box to browse for the image.
If you have a plugin installed similar addblock or it will hang
-
Hello
I wonder. Is there a command that I can run the service console that would allow me to copy a file from a network share on the data store on the esx host?
Eric
If sharing is a Windows, you can also use smbclient within the service console and ride sharing.
André
* If you found this device or any other answer useful please consider awarding points for correct or helpful answers
-
Can we use use DELL R610 / R710 for execution of the ESX host?
We will purchase a new server to run ESX 3.5 or vSphere. We have new DELL servers.
We considered R610 and R710, but we see that there are only 2 PCIe slots. As one of them be given for an image ADDITIONAL NIC card, there is only one location for HBA. It is advisable to use a Dual Channel QLogic QLE2462 HBA.
However, it seems that the Dual Channel HBA will be a single point of failure - if it is connected to 2 different switches FC. We would love to hear if anyone uses these DELL servers to run the ESX host.
Thank you
Good question, I would have preferred two HBA cards. If storage fails everything disappeared. If network failure you will not have access to the outside, but the chances of data corruption is smaller.
Duncan
VMware communities user moderator | VCP | VCDX
-
-
Partitions on SSD for the hypervisor host of vSphere5 (Free Edition)
Hello
This will be my first installation of a system of 5 hypervisor vSphere (Free Edition). My new PC will contain an SSD (120GB) for the vSphere host and VMs. in addition, it will contain a RAID controller with multiple SATA drives for data. My questions are:
Do I have to create partitions on the SSD drive for installing vSphere 5?
I read on http://vmetc.com/2009/07/22/best-practices-for-vsphere-esx-4-service-console-partitions/
There is several necessary partiotions. Is the installation program automatically creates those partitions?
Is it possible to store the computer virtual (System of each operating system partition) on this SSD also?
I will store VMs for 2 x Windows7 (approximately 2x30GB), 1 x FreeNAS, 1 x Linux for Zarafa, 1 x Linux for many other services.
Kind regards
Oliver
Hello and welcome to the forums.
Do I have to create partitions on the SSD drive for installing vSphere 5?
No, the installation program will take care of everything for you.
Is it possible to store the computer virtual (System of each operating system partition) on this SSD also?
Yes, the installer will create a VMFS on the SSD volume where you can place these files.
Good luck!
-
How can I make the page of form for the Yahoo host?
How can I make the page of form for the Yahoo host?
I guess you want a contact form that sends data to your e-mail account.
- Find out if your hosting plan supports PHP code and the PHP mail() function.
If so, try this tutorial into 3 parts:
ALT-Web Design & Publishing: sensitive Contact form with 3.2 Bootstrap and PHP (part 1) - If your hosting plan does NOT support scripts, you will need to use a 3rd party like Wufoo.com service. They host the form processing scripts on their own servers for you.
Nancy O.
- Find out if your hosting plan supports PHP code and the PHP mail() function.
-
We meet just power down and lost electricity ESX host.
When we start the ESX host, we can on each individual virtual machine.
Y at - it a setting that we can put in place for these VMs critics may start se?
Your opinion is requested.
Thanks for your advice. He agrees with your saying that the start / stop sems to be buggy.
It's only disable it every time that you enable VMware HA.
But it works (if enabled) and may be useful to define how the system starts up.
André
-
Is there any interface virtual native network for Mac OS
Hello
I'm trying to do something with the interface of virtual network on Mac, I need to operate directly on the device (similar to tun/tap) virtual network. As we know, tun hails from Linux, so it's good to use it under Linux. And I wonder if there are all these virtual network "native" Mac interfaces?
Thanks in advance.
There is a built-in driver called 'Amadou' which is functionally equivalent to "tun". It has been used to implement OpenVPN clients. You will need to look for more information. Nothing can "tap."
Maybe you are looking for
-
Windows 10 has messed up Satellite click Mini L9W - B
I downloaded windows 10 years ago and my laptop does not work properly now. There are a series of problems, including: I can't access to my office and all my personal files that I usually set out for access with easeI can't add a photo to my accountI
-
Blue screen occurs when I connect hybrid USB TV tuner
Hi, I brought a USB PX1256E hybrid TV tuner and I can't run. I have Windows Media Center and when I install the software and connect the equipment on the USB port displayed a blue screen (windows crash) and restart my computer. Please, can someone he
-
When I "print" dialog box gives the option to "print to file". However, I'm unable to put a tick in the box. I want to "print to a file" that is to save an email or a Web page in a 'file' and not actually print it. Suggestions for WHO to get this
-
Satellite A210-127 (PSAELE) - after flashing the BIOS, the password is required
Hello I just reinstalled my Windows Vista x 64 SP1 Ultimate... That I had a good idea to download a fresh drivers from the Toshiba site... After you have installed a BIOS update, WinPhlash version 1.0.2.2, after reboot have a surprise my bios to ask
-
Warning against a not enough space on drive E
Hello I'm running Windows 7 on a HP Pavilion Elite HPE. My main I s drive C and there are D (original image), then the HP (e) which is to give the alert on a low disk space. When I look at what's in the E drive there is a folder called 'my name' - PC