Is there a default setting for all the choices in the advanced appearance settings?

Similar Questions

• Is there a tool out of all the windows configuration settings? (gpedit.msc, services.msc)

  I am trying to build an audit tool to extract the Windows of my environment settings, and it compares with planning what I defined. This baseline scenario specifies in detail what settings should be enabled / disabled / how it should be configured.

  Because it is a large scale environment, and I know exactly what I need, I would build a tool of mine.  I've used such gpresult and secedit commands to get the settings but I can't get all the settings.  I've already got many settings in the registry, but it works to be a bit heavy.

  Most of the settings I need are in gpedit.msc, services.msc, although I can't get in/out these values by using a script.

  For example -.
  Store passwords using reversible encryption for all users in the domain = on (or off)

  This setting is in gpedit, but I can't find this setting in the registry / other functions of command line.  I noticed that most of the information is readily available in gpedit.msc / services.msc although I don't know how to automate the extraction of these parameters.

  Could you please help to automate the extraction of these parameters?  I want ths process is transparent to the user / server administrator to reduce the interaction required for the information.  A macro will not allow the extraction of these parameters, while the computer is locked.

  I'm looking for Windows 2003, XP and 7.

  Thanx

  Hello

  Your Windows Xp issue is more complex, while we usually answer on the Microsoft Answers site, you can post the question on the link provided below for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• BlackBerry Z10 well defined, I can't get the phone to ring and vibrate as the default value for all calls. I can put individual contacts, but I want to ring and vibrate for all.

  Although the value, I can not phone ring and vibrate as the default value for all calls. I can put individual to vibrate and ring contacts and it works but I want as the default for all incoming calls. Any help would be appreciated, thanks

  Sorry, I found the answer in the manual

  "Change your ringtone, sounds or alerts.

  GoTo settings\notifications to the bottom of the screen select application\phone

  You can activate vibrate out there, put the ringer default etc.

• Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Printing which forms an angle seems ok, but one that is horizontally seems faded, incomplete.

  I was wondering if I saved a layer somewhere and set it as a default value.

  If you group the layers, you will be left with a single layer, thus spreading your concern.

  Suggest that you do the following:

  1. Make sure you have the latest drivers for your printers
  2. Reset the default preferences.

  Hold the Alt, Ctrl + Shift keys when you click the icon to open the items. When asked if you want to delete the settings file, say Yes.

  Items nearby and let regenerate the file.

• Change the default setting for files...

  Is it possible to change the default setting for effects of pixelization at 300ppi instead of 72 dpi? And is it also possible to have "Align new objects of pixel grid" unchecked by default? I realize I can change all of these settings when I create a file or after, but I would like them to be my default settings. I'm under Illustrator CC on Windows 7. Thank you!

  Create your own profile document containing these settings

  http://blogs.Adobe.com/adobeillustrator/2009/05/startup_profiles_a_great_tool.html

• Where can I find Firefox 7.0 to install? Is there a link maintained where all the firefox releases are available for users

  Hello team,

  Is there a link maintained where all the release of firefox and its patch are available for users to download & install

  You can get Firefox 7 here

  • http://releases.Mozilla.org/pub/mozilla.org/Firefox/releases/7.0.1/

  BUIT its recommended to use Firefox 8

• (1) is there a function for all the object of the same size?

  (1) is there a function for all the object of the same size?

  Sorry, I thought you wanted to align the objects.

  We do not have the function to make items of the same size. You must change one by one. To change the .lks file may be more effective.

• How to change the default setting for Australian News & Sport?

  How to change the default setting for Australian News & Sport?

  What setting, probably your browser home page, and how you do that depends on what browser you ar using.

  If using IE opens this page, then click on the "gear" icon to the rt at the top of the page, select Internet Options and look in the general tab

• Hi, windows 7 Disk Defragmenter problems daily schedule set for all discs, never happens, it sometimes takes weeks

  Hi, windows 7 Disk Defragmenter problems daily schedule set for all discs, never happens, it sometimes takes weeks. Have a disk busy on the farm that is used for the storage of video surveillance. When I realize the performance issues, I check and find tht 'daily' Setup for MS disk defragmentation is not in fact run every day. I am watching silent movies and waiting for a 500 GB drive to effectively defragment, pass it is on average 1 percent per minute (with any other IO goes on the disc and app collection closed).

  There must be (I hope) a flag I can put to Disk Defragmenter to be more aggressive in its analysis.

  It is Windows 7 64 bit running on AMD processors, disks are sATA plugged in, although there is also a matrix RAID PCI Promise, it's usually when I started Hello I/O on the Board of 2 TB or utilization of the 'C', I realize the lack of defragmentation. I recall, before the SP1 under WIN 7, he ran on a daily basis, in fact, rather than an API algorith "guess".

  System is in place 24 x 7 (I turn off the monitor at the time of sunset), there is no "powersaver" feature used on this particular device. I edited my original question because after many years of support, I realized, by asking the initial question, that I was not providing information that I would be asked a customer, if I was still doing this job.

  Kind regards

  Lorin Boyack

  Hello Lorin,

  There are several reasons why the built-in Defragmenter may not work correctly:

  Method 1: He is also a malware on the system. Solution: Run an anti-virus control and also a spyware check.

  I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Method 2: The disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 3: The disc is damaged and must be repaired. Solution:

  a. open "Computer" and right-click on the drive that you want to disable frag.

  b. Select 'Properties' and click on 'tools '.

  c. Select "Check now" to check the drive for errors.

  d. Select the two options and click on 'start '.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors

   

  Important: While running chkdsk (check disk) hard disk, if bad sectors are found on the hard drive when chkdsk attempts to repair this sector, the data available in this area may be lost, and it is not recoverable.

  (This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).

  Method 4: Disk Defragmenter may be corrupted, requiring a system restore to fix.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

   

  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 5: There are other programs that are running this interruption, the built-in Defragmenter. Solution:

  a. close all running programs.

  b. If you think there may be some programs that run in the background.

  c. press Ctrl + Alt + Delete and

  d. Select "start Task Manager".

  e. under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Is there a default value for NC_ATTRIB_BKD_PERIOD

  I got a project and the value of NC_ATTRIB_BKD_PERIOD has been set to 10. I changed this value to 1 (I guess that's milliseconds) and the software runs much faster save about 20 seconds on a second test period formerly 60. I have used NEITHER CAN before and have never encountered this before setting and I was wondering if there is a default setting for this and if yes, what is it?

  Hi John,.

  If you look at the nican.h, you can see that the NC_ATTRIB_BKD_PERIOD is the legacy version of the NC_ATTR_PERIOD attribute.  (I say "If you look", but it is not really clear just looking at...) The NC_ATTR_PERIOD is documented as follows in the manual NI-CAN

  NC_ATTR_PERIOD (period)
  Duration specifies the rate of periodic behavior in milliseconds.
  The behavior depends on the Type of Communication as follows:
  NC_CAN_COMM_RX_BY_CALL
  Duration specifies a minimum interval between the
  transmissions. Even if ncWrite is called very often, executives
  are transmitted over the network at a rate no more period.
  Definition of period to zero disables the minimum interval timer.
  NC_CAN_COMM_RX_PERIODIC
  NC_CAN_COMM_RX_UNSOL
  Time specifies the time between subsequent transmissions.
  and must have the value greater than zero.
  NC_CAN_COMM_TX_BY_CALL
  NC_CAN_COMM_TX_PERIODIC
  NC_CAN_COMM_TX_RESP_ONLY
  Period specifies a timeout of watchdog. If an image is not received
  at least once each period, a time-out error is returned. Setting
  Period to zero disables the timer.
  NC_CAN_COMM_TX_WAVEFORM

  If the change you made will have different effects depending on your mode of transmission.  In my view, the default value is 0, but maybe it's not valid if you change the mode of transmission.

  Let me know if you need more information.  Have a great day.

• Number of days for all the months of the previous 10 years

  Hi guys,.
  I wonder if there is a way to insert in my table of data for the period dimension all
  days for the months of the year 2004,2005,2006,2007, etc..
  Is there somewhere in the Oracle database that stored the number of days for all the months of the years?
  I think I woud have to use a loop of the GET something like the following:
  
  -The year month day
  2004 - 1-1
  2004 1-2
  2004 1-3
  2004 1-4
  2004 1-5
  2004 1-6
  etc.
  Assuming that there are 28 or 29 or 30 or 31 days the lines for January 2004 would be 28,29,30 or 31.
  I need it for all the months and years.
  Thank you
  metalray

  Hello

  The following SQL returns all the days from 01/01/1970 until today:
  + (Just modify the FRST to What You Need).

  with beginat as (
  select trunc(to_date('1970/01/01','yyyy/mm/dd')) frst from dual
  )
  select frst+(level-1) as daydt
  from beginat
  connect by level <= ceil(sysdate-frst);
  

  With a previous alter session set nls_date_format = "dd/mm/yyyy hh24:mi:ss" result would be:

  DAYDT
  -------------------
  01/01/1970 00:00:00
  02/01/1970 00:00:00
  03/01/1970 00:00:00
  04/01/1970 00:00:00
  05/01/1970 00:00:00
  06/01/1970 00:00:00
  (...)
  09/01/2011 00:00:00
  10/01/2011 00:00:00
  11/01/2011 00:00:00
  
  14986 rows selected.
  

  In fact, the real question is: Why do you need them?
  (^_^)

  Published by: Nicosa January 11, 2011 14:25
  (for the correction)

• my pc CPU running at 100% for all the programs I opened / what is the problem and how to solve?

  my pc CPU fan runs very strongly & the processor running at 100% for all the programs I opened. DO NOT KNOW IF IT IS A VIRUS IN THE PC WAS WORKING FINE A FEW DAYS AGO. How can I solve this issue?

  Hello

  You did changes to the computer before this problem?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

  I would also refer the below article which may be useful.

  The CPU utilization reaches 100 percent when you run programs after you install Windows XP Service Pack 2
  http://support.Microsoft.com/kb/890582

• In Windows Media Player 11, I would like to change the album art integrated for all the songs in an album while removing all previously used album art.

  In Windows Media Player 11, I would like to change the album art integrated for all the songs in an album while removing all previously used album art in advanced tag editor. My mP3 player only displays art on top of the list of advanced tag editor and WMP automatically puts most recent album on the background art. Is there a way to change this?

  Hello

  Try the following steps:

  a. connect to the Internet.

  b. open Windows Media Player.

  c. click on the Library tab, and then go to the album you want to resolve.

  d. right click on the album and then click on Find Album Info.

  e. If you get an error message that says you must change your privacy settings before you can update media information, follow these steps: click on the Tools menu, click Options, click the Privacy tab, and then clear music update files by retrieving the news media from the Internet check box. Then, in the library, repeat the previous step.

  See the following articles for more information:

  http://Windows.Microsoft.com/en-us/Windows-Vista/wheres-my-album-art-fixing-song-titles-artist-names-and-more-in-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-change-album-art-in-Windows-Media-Player

• Spanning tree Distribution Switch Port is root for all the VLANS

  Hello world.

  Uplink to switch on 2 layer network flat if Distribution change a.

  This distribution uplink port is Root Port.

  Core switch port goes to the Distribution switch appears as State PLEASE FWD.

  It will cause slow for users who are connected to the network on the Distribution switch?

  According to my understanding core should be Root STP for all the right of VLAN?

  If necessary how can I make kernel as root port switch port?

  Thank you

  MAhesh

  Hello

  a root is a designated port (if shipping port) on a non-root bridgewhich a path root the lowest cost to the root bridge. So there is nothing unusual here, and your kernel needs to be done to root bridge if you run STP between distribution and kernel as you apparently.

  Kind regards.

  Alain

  Remember messages useful rate.

• Manual large editions with sensitive html setting. Is there a way to determine how the entries appear in the table of contents?

  I publish major textbooks with sensitive html setting. Is there a way to determine how the entries appear in the table of contents? If I publish a small section of the manual then 2nd level entries appear as eruptions under the chapter name, but if I publish the manual in its entirety then level 2 headings are not at all. I would like them to appear as the eruptions in the table of contents, but I need to publish the manual as a whole in order to keep the cross references. Any help will be greatly appreciated!

  I think that this would make clearer - and it would skip and tables of contents of books under.