Is there a design guide to configure the touch screen in DMS 5.2?

Similar Questions

• Touch the touch screen moves the cursor appear on another monitor in a multi-monitor for Windows 7 system

  There are three 3 monitors on this system. Two of them are the screens LCD Dell 2407WFP-HC and one is the touchscreen Acer T230H. Dell monitors are connected to a NVIDIA Quadro FX3500 and identify as monitors 1 and 2. The Acer monitor is connected to a NVIDIA GeForce 7600GS and identifies as monitor 3. The system runs Windows 7 Ultimate x 64, with updates. Everything works fine except for the touch screen feature.

  According to the instructions I used the Tablet PC configuration to configure the touch screen. In the installation program, reports monitor 2 Dell incorrectly as having entered touch available and the Acer monitor 3 reports as not having NOT available - also incorrect enter key.

  When I touch the Acer screen, the cursor appears on the monitor Dell 2 and moves according to the movement of my finger on the Acer screen.

  1. Go to the control panel and search for "Touch".
  2. Click on 'The Tablet PC settings'
  3. Click on "Setup"... "right" configure your stylus and touch displays.
  4. Choose "enter." »
  5. Press the 'Enter' key until you see the instructions displayed on your actual touchscreen.  Tap the screen and it will say something like "press ENTER to move to the next step.

  You should now see your contact to events (and mouse) are displayed on the touch screen when you... Well, touch.

  Hope that helps.

• Disable the touch screen

  I have a HP ENVY x 360-m6-w105dx and would like to know if there is anyway to temporarily disable the touch screen?

  Hello.

  I did it via Device Manager in Windows.

  Look under "Human Interface Devices".  There should be a line for HID-compliant touch screen (or something similar).

  Double click on that and then click on "disable the device.

  You can make it work again by clicking on "Activate the device" in the same place.

  Good luck!

• Why the touch screen is good for the design of the window?

  Touchscreen seems to be an approach of incorrect interface on the design window, I need a lot of lotion to keep my skin healthy, been to designers?

  Thank you

  Well, a touch screen is completely optional with Windows 8. While it is designed for you to use a touchscreen, there is nothing in the design that prevents you from using a mouse and a keyboard. In fact, IMO it works a little better with m/k with the touch screen.

  It's just an additional way to interact with your computer - touch screen is not intended to replace other ways.

• Is there a way to disable the touch screen on a TouchSmart 520?

  One of my cats likes to stick his nose in the touchscreen.  Is there a way to simply turn off the touch screen on a 520-1020?

  Hi cs700,.

  Here's how:

  Go to the sounds and then hardware and Control Panel.

  Select the Pen and Touch and go to the contact tab.

  At the top is "Use your finger as input device."  Uncheck the box.

  Click apply and then click OK.

  The touch screen no longer works to the touch.  You should now use the mouse and keyboard, just like any other computer.

  Repeat these steps to reactivate it.  "You also have to check"Enable multi-touch and inking gestures", it turns off when the" use your finger... "is disabled.

  Hope that helps.

  If you like my answer, say thank you with a Kudo. ***

• How to configure the logo screen of handguns to several domain user time?

  How to configure the logo screen in time to punch to several domain like domain1\administrator, domain2\administrator and My-PC1\administrator user in windows 2007?

  Hello

  It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  For reference:

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/de5fea8e-E327-4D71-a599-546dea543149

  Hope this information helps.

• Is there a Windows API that I can use to turn off the touch screen of WIndows 8?

  It makes sense for a Tablet have a touchscreen. A valve system, I would like to live without a touchscreen.

  I would like to disable the touchscreen disabled if a machine is not in tablet mode. However, I can't find any API to do it on Windows 8. in Windows Mobile, there are APIs such as DisableTouch and EnableTouch. I wish I had such somethings on Windows 8 Pro. When the touch screen is disabled, the OS will never be aware of activity on the touch screen.

  Is anyway to do this?

  Thank you

  Youssef

  Hello

  It seems that you want to disable the touch screen on a Tablet using the C++ programming language. I suggest that you post your question in the MSDN forums. The community on these forums is more experienced to answer questions related to the programming language.

  Here is the link for the same thing. Thank you.

• Can I turn off the TOUCH screen feature?

  Here's my problem: my granddaughter for baby love watching YouTube nursery rhymes on my iPhone before the NAP. But sometimes it naturally touches the screen, which stops the video.

  Is there a way to disable the TOUCH screen of the iPhone function while keeping the video running?

  Thank you!!!

  Hi, Edward

  Yes - you can see that guided access (for example: "Ignore all keys") meets your needs:

  http://help.Apple.com/iPhone/9/#/iph7fad0d10

• Disable the touch screen scrolling

  I found a ton of results describing how to force Firefox to scroll as a touchscreen. Let me start by being clear: I want to do the opposite of this. I have a page that key scrolls correctly, but this causes problems.

  I use a web page that submits electronic contracts, and they require signatures; I access this page from a Dell XPS 18 tablet. The problem is that the signature field is extremely temperamental. If you try to connect, the page scrolls, and the signature field remains empty. If you type just as it should be and then start to sign later, you can select the field, and it works. The problem is that it is so capricious, it took me several minutes to get the idea of the right button/timing of the thing. This does not work for clients. If I plug a conventional mouse, it works as it should; Click and drag the points highlights text, rather than scrolling and click and drag in the signature box signs.

  I use Firefox for this task because of its high degree of customization; I could (pretty simple) to make everything display exactly as I wanted. On that note, I hope that there is a way to disable the touch scrolling. I tried to use the clamp and slide the module to subvert its own destination, but it does not seem an option to do this. If someone can point me in the direction of a parameter or add-on that can do this, I'll be very grateful. Ideally, I would like to disable on this page in particular only, but disable overall would be as well.

  Since the submission of my original post, I spent a lot of time delving into everything: config with nothing else than an incomplete article knowledge base to guide me, and after losing a ton of time to play with the mousewheel settings, I discovered gestures.enable_single_finger_input, set it to false and voila! Problem solved. If there is never anyone trying to accomplish this for a reason, I hope that you find it useful.

• How to temporarily disable the touch screen in Windows 8? TouchSmart 320-1122la

  TouchSmart 320-1122la

  64 bit of Windows 8

  This solution does not work for me because I don't have the option "Use your finger as input device."

  Go to the sounds and then hardware and Control Panel.

  Select the Pen and Touch and go to the contact tab.

  At the top is "Use your finger as input device."  Uncheck the box.

  Click apply and then click OK.

  Is there another solution?

  Thanks in advance.

  Hi, I have a HP TouchSmart 320-1030, so it can work on your TouchSmart:

  1. Press Windows + X logo.
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select disable from the list.
  6. Click Yes in the dialog box that asks you if you are sure you want to disable the touch screen driver.

  When you want your touchscreen to work again, follow the above procedure, EXCEPT when right-clicking on the touch screen driver, select enable.

  ~ Lil Liebe

  I'm not an employee of HP; I just want to help.

  Click the White Star of Kudos to say thank you *.

  By clicking 'Accept as Solution' on an answer that solves your problem makes it easier for others to find solutions.

• Portege M400 - where to find the touch screen XP driver

  Hello, I was wondering where I could find the touch screen for my Portege M400-S5032 pilots.
  I looked on the site Toshiba driver but could not find them.

  Thanks in advance for your help,
  Carbira1

  Hi mate

  Take a look at the Toshiba driver page we
  [Drivers Portege M400-S5032 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1598633& rpn = PPM40U & modelFilter = M400-S5032 & SelCategorie = 2756709 & selFamily = 1073768662]

  There you should find the Wacom Dual Touch driver for Windows Vista/XP
  I think it's a good thing.

• How to disable the touch screen on the Qosmio DX730?

  I want to use the calibrators of color such as colourmunki for my graphic work. These must place me something on the screen.

  How can I temporarily disable the touch screen while I do this?

  I tried Control Panel and manual with no luck.
  Thanks for any help

  Hello

  Have you found a way to do it?
  I think that it of not possible to disable the touch screen.
  Found no information in the user manual. Maybe you can check the BIOS settings available. Switch on and press F2 to enter the BIOS.
  But to be honest, I doubt that a power option would be available there.

• How to disable the touch screen of the Toshiba LX830 - 11 d

  Hello

  I managed to break the touch screen on a Toshiba LX830 - 11 d.

  The machine runs Win8 and always works with a USB keyboard and a mouse, although he thinks there are plenty of touch of the finger around the damaged area.

  Is it possible to disable the touch screen feature so that I can use it as a 'normal' PC or remove the screen touch himself leaving a simple LCD screen?

  Thanks for any advice.
  Dennis

  You see the touch screen in Device Manager? Maybe you can turn it off in there.

• AT300 - area on the touch screen, pick up ghost keys

  Hi people,

  I'm having a problem with my Tablet AT300 where it that takes the touchscreen touches - many of them - in a place where it is not to be touched. When I turn it on, it starts to go crazy with the vibrations repeated thought to touch screen that is to be touched. I see the behavior that it is picking up in an area of the screen - the left-hand side from the bottom when held in orientation landscape with the camera at the top. I can say that it's in this area because it retains hit the back button, and if I do then rotate the device to the left, it keeps bring up the pop-up menu settings of the lower right and close it again.

  I saw one report of this type of behavior that was caused by a loose wire to drop the device. My Tablet has fallen a few times, but not on hard surfaces. It is possible, but it could also be something else. I am reluctant to remove if it's a software problem (well the fact that it is an area of the touch screen suggests it's material, I guess). I guess I could reset it hard, but to be honest, I don't want to do this because my daughter won't lose its apps and saved games.

  So, who is the most likely scenario here, and what is the best way of difficulty? Any help would be greatly appreciated.

  -Larry

  I found interesting instructions on Youtube:

  Search for:
  Toshiba Thrive for the screen replacement repair Guide

• How is - this hard I can reset my iPhone 5 with the broken home button and the touch screen is not responding.

  My iPhone 5, iOS 9.0.2 does not respond to touch. (broken touchscreen) and my home button is broken. my battery is fully charged so that it would take too long to wait until it turns off. I need a way to Hard reset it without a button at home and the touch screen. I know there are 3rd party apps that could do this, but I can't open my phone (no password protection) to 'trust' on this computer. If there are applications that could work around this? Any help is appreciated.

  There is no way to do it. You have 2 hardware problems. Time to replace the phone.