Is there a version of Windows with the (optional) hardware write protection?

Similar Questions

• In ultimate windows 7, when I want to paste or create a file on USB, windows says: the disk is write protected. ?

  in Window 7 Ultimate. When I want to create a file or paste a file copied to a USB port or flash memory, windows cannot perform this action and the message: the disk is write protected.but when I used the same USB Win XP, disc is OK and not write-protected.
  I tried this question on several USB key, but the result was the same.
  anydody can help me?

  Hi Saleh2506,

  You can try and remove the disc, remove the write protection (by reversing a tab on the disk), and then try again.

  If you do not have the valve on the USB, try the following steps to resolve the problem:

  1. Click Start , type regedit.exe and press ENTER.

  2. navigate to the following location:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrrentControlSet\Control

   

  3. control with the right mouse button and select new and key.

  4. call it as StorageDevicePolicies.

  5. click on StorageDevicePolicies and on the right pan right click and select new > DWORD and name it as WriteProtect.

  6 double-click it and set its value to 0.

  This will disable the write protection on USB/flash drives.

  Restart your computer and check to see if that fixes the problem.

  Important The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  I hope this helps!

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How can I re-registar my version of windows with the illegible product key?

  Had to reinstall windows after the accident. Unable to read the product key (worn) for re-registar as legal copy. What can I do?

  Hello

  that your reinstalled vista is not activated product key finders don't work for you

  and the tile is unreadable can we help you with this

  I suggest you contact the manufacturer of the computer

  normally manufacturers recovery disks do not require an input key product on your part

• Full Auto (copy) with the option to write another s.

  Hello

  I have two fields text A, B

  When I write "1" in the A I want to copy B (now is calculate-> value is "whatever" field of b. primitive, but it works.)

  That's the default. Now I need an option to write '2' in B if necessary. For now he automatically change me to "1".

  Is this a javaCript for that?

  Thanks for the replies

  Delete the code of calculation for field B and enter the Validation code from: field

  If (event.value) this.getField("B").value = event.value;

  This will cause B so that the value of A (when is not empty), but still allow you to change B independently.

• accidentally, I buy the windows version of adobe acrobat DC instead of the mac version. I have only a mac computer. can you please cancel my purchase and replace it with the version of windows with a mac version.  the order number is AD006058877NL. Rgds,

  I accidentally buy the windows version of adobe acrobat DC instead of the mac version I only a mac computer can you please cancel my purchase and replace it with the version of windows with a mac version.  the order number is AD006058877NL. Rgds, jan van montfort + 31681471049. [email protected]

  Hi Jan,

  I understand your concern, please see this doc on this subject: return, cancel or change an Adobe order

  Kind regards

  Rahul

• error message "there is a communication problem with the web server."

  I'm trying to connect to three rivers FCU website www.3riversfcu.org and I get the message error "there is a communication problem with the web server." I am running Windows 7 on Toshiba laptop. No idea how to solve this problem? Something in the settings?

  Hi, Mayhem15,

  See if this troubleshooting help.  It was written for Windows XP, but in many cases, these documents still apply for more recent versions of Windows.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

• Problem with password reset link - "there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later. »

  Hello, account Windows Live from my wife was hacked a week ago and has been used to send many spam emails. As a result, his account has been disabled or closed (we are not sure). Whenever she asks to reset a password and a link sent to a different e-mail account, when she clicked it gets this message 'there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later. "She is tried repeatedly, but get the same message. Someone knows how to go beyond that, so she can recover her account? Thank you.

  Hello BBB34,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc.

  My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc. When I put disc SP2 in it tells me that it is a work old version and custom. How to make a disc with SP3 top to repair my OS?

  Hi DFPI.

  I suggest you to uninstall Service Pack 3 temporarily on your computer.

  How to remove Windows XP Service Pack 3 from your computer

  Later, try to repair the computer with the Windows XP disc and check if it works.

  Later, reinstall the Service Pack 3 after the computer repair.

  Reference: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Hope the helps of information.

  Please post back and we do know.

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• How can I add an ID related when I get this message (there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later.) ?

  How can I add an ID related when I get this message (there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later.) ?

  Hello

  an answer your other thread

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/why-do-i-keep-getting-your-Windows-Live-ID-cant-be/268ff99c-E459-E011-8dfc-68b599b31bf5?page=1&TM=1301396733390#footer

• There might be a problem with the configuration of your DOMAIN NAME SERVER

  Last week one, I noticed some problems with my internet connection. I have a BSNL broadband connection. I am connected to the internet, and after some time all of a sudden, I'm not able to connect. My modem lights are all on and on my laptop, I see the symbol of 2 computers with a note on it, which means that I'm connected. But still the pages not displayed. When I run Network Diagnostics (I Windown Vista) I get the error message saying: "there could be a problem with the configuration of your DOMAIN NAME server. I turned off the computer and the modem and switch it on after a long time... He would return but loses the connection with the same error message again. What can I do? I tried to reset the modem, also tried the system restore. What can I do? Please help me. I have laptop Dell Insipiron with Windows Vista and I connect wireless.

  We do not know how your system should be set up - including the DNS configuration and settings.  I recommend you contact your ISP's technical support group and get help from them in the configuration of your computer (and test lines and modem - the problem could be the modem and not on the computer or it could even be the service provider itself).  It can be something as simple as a typo or a box checked or not checked - I do not know because I do not know their settings (different for each access provider).  Give them a call.  I do so often when I have connection problems, and they are almost always useful, or schedule a service call if they cannot help.  I think it's your best chance to solve this problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• DISABLE "there is already a file with the same name to this place.

  Window 7. 64 bit. How do you turn OFF DISABLE, CANCEL, DELETE, STOP the pop-up 'MOVE the FILE'?

  As a user since the days of DOS command lines and having had a routine all the way through to XP, this new window is one of the most annoying pop ups for an experienced user. If it isn't a swith toggle check box or an other power selection for this message, there must be. And if there is, you did it quite hard to find.

  The dialog box that appears in Windows 7 that starts with "there is already a file with the same name to this place. It lists then the three choices - "Copy and replace", "Do not copy" and "copy, but keep both files.

  I managed several libraries of forms which oblige me to replace the files throughout my day. I make a copy of the file I replace first of all, for archival purposes and this pop-up box is, well, it's boring. There must be a way to disable.

  This box comes up to move files and to copy the files.

  Any help in these turn off would be appreciated.

  See you soon.

• Can I recover my old version of windows on the computer and use it on my old laptop?

  Original title: windows 8.

  Last year, I bought a new desktop computer Acer with windows 8 and installed my windows professional 8.1 on it!

  My question is! can I recover my old version of windows on the computer and use it on my old laptop because it was purchased with this PC AND how I to get it back?

  I am braking the rules by doing this? the original key was included with the purchase of my new Acer and I should be able to pick it up and install it on another device?

  If I can't, I'll have to buy a new one to upgrade my old windows laptop 7. I'm trying to save money! That's why I ask this question.

  Roger

  No, you cannot transfer the original license that is pre-installed on your Acer, it relates to it because it is an OEM license.

  The OEM of Windows 8 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  So, you need to invest in a new license to upgrade your laptop that is running Windows 7:

  http://www.Windows.com/buy

• Cannot hard drive reformatting, reinstallation CD has older version of Windows on the computer

  I've been to... and try to reformat this drive Jackson back. Over the past two days, I tried just about anything. The resettlement of what CD does not work, I get an error message that the version of windows on the CD is longer than the computer. I'm also looking for Darik Boot and Nuke, but it does not work, something about "the component you are trying to use is not available" for seting to the top of the SonicRecordNow.

  I tried different ways to get to the c: prompt, who succeeded, but when I hit format, I get 'function cannot run because the volume is in use by another process', or when I type "a:" I get "exception processing message c0000013", etc.

  I remember never install a new version of WIndows.

  Nothing I do not work! I'm ready to repair this computer with a hammer. Help, please! : smileysad:

  
  

• I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

  I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

  I think you are talking after upgrade to CC 2015 you're not able to launch I. Also, I believe you speak for read only matter of preference.

  After following the instructions please do not launch Illustrator and check your file preference if the permissions have been set correctly. A good way would be to get inside the preferences folder and then try to create a file manually. If it succeeds, please write to [email protected]

  A few external links to help you set permissions:

  MAC

  OS X Yosemite: set permissions for items on your Mac

  WIN

  Set, view, change, or remove permissions on files and folders

  r-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed http://Answers.Microsoft.com/en-US/Windows/Forum/windows_vista-Files/How-do-i-change-folde

  Kind regards

  Ashutosh