Is - this script PowerCLI obsolete?
In an ESX 5.0 environment, I have a group of VMFS data store ten stores of data visible to a group of thirty-two guests. Each data store uses currently multipathing fixed to each host, but I want each data store instead use repetition alternated for all guests. I found the following on https://runningvm.wordpress.com/2010/08/31/vsphere-powercli-multipath-policy-script-examples/ ((troisieme paragraph):
#Sets policy of multiple paths for all EMC LUNS (naa.6006*) connected to all hosts in the Cluster RV00 to roundrobin
Get-Cluster RV00 | Get-VMHost | Get-ScsiLun - CanonicalName "naa.6006*" | Game-ScsiLun - MultipathPolicy "roundrobin".
It promises to do exactly what I want, but page was published in 2010 and I fear it may be obsolete. Everything in this script still works in ESX 5.0?
Also, can this little script to correctly run its own? Read further down the page linked sixth paragraph and following), I see the author offers a script plus much, much for implementing Multipathing to round robin, and makes me fear that this little one-liner may not be intended to stand on its own and can leave pieces untied and hid the consequences. Can someone comment on that?
Thanks a ton, everyone!
Yep, it should always work. I've actually used something similar earlier this week
The plu script is just a bit more generic (i.e. you request credentials, clusters, etc.) and also defines the strategy of selection of the default path for the type of storage array. Maybe something to do for the new LUNS are configured correctly by default. It does not depend on the use of esxcli.exe, while you could do this with Get-ESXCli
Tags: VMware
Similar Questions
-
Authentication and script PowerCLI on demand
I have a powerCLI script I want to program but I want to do by calling with vRO. However, I don't want to save my password in the PowerCLI script - I would like the script to authenticate on the server vCenter Server and for example to list running virtual machines once a day. How can I call this script from vRO without storing the password in the script itself? vRO and the PowerShell host are on separate virtual machines.
There are builtin PowerCLI CredentialStore (see the New-VICredentialStoreItem).
An alternative is the method described in password encrypted local store in a PowerShell script
-
Definition of Orchestrator to execute a script PowerCLI
What is the best way to implement Orchestrator to run a powerCLI script?
Hello TheVMinator,
Here are the first two ways that come to mind for me:
- VCO run under Windows - use the 'command' to fall at a command prompt, and then run your scripts PowerCLI from the vCO Server (you can use the method described in this article to access the object of the control: How to execute a PERL Script from a vCenter Orchestrator Workflow)
- Install the PowerShell plug-in, configure WinRM, then run your PowerCLI scripts on the remote host that you configured via WinRM (reference: seamless integration with PowerCLI and PowerShell plugin |) VMware vCenter Orchestrator Blog - VMware Blogs)
-
Mem script PowerCLI, cpu, disk, availability
Hi all
first tks for this forum. I just saw this great tool exists-> powercli
I try to do somethings.
first of all, I would like by vm the % availability per virtual machine
and the average of the CPU usage, use of mem etc... since last year.
I can do this script but I can't find how.
TKS for your help
Which explains, the metric has been introduced only in vSphere 5
-
Need a script powercli on behalf of user ESXi servers list
Need a script powercli on behalf of user ESXi servers list
My mistake, try something like this
$user = "root" $pswd = "password" Get-VMHost | %{ $esx = Connect-VIServer $_.Name -User $user -Password $pswd Get-VMHostAccount -Server $esx | Select @{N="Host";E={$esx.Name}},@{N="Uid";E={$_.ExtensionData.Id}},Id,@{N="Name";E={$_.ExtensionData.FullName}} Disconnect-VIServer -Server $esx -Confirm:$false}
-
Run scripts PowerCLi PowerCli console?
Is it possible to run scripts PowerCLi PowerCli console?
I want to use the batch with PowerCli orders orders... and I'm stuck on adding entries PowerCli keyboard console.
You don't need the parameter of hard disk, the hard disk is passed through the pipeline of the cmdlet Get-disk hard.
If the virtual machine has more than 1 hard drive, you use a Where clause to select the hard drive you want.
Get-disk hard - VM "MV0857-gastela" |
where {$_.} Name - eq "Hard Disk 2"} |
Together-hard drive - CapacityKB 20000000 - confirm: $true
You can call PowerCLI cmdlets, but be sure to connect all first.
Something like this for example
C:\WINDOWS\system32\windowspowershell\v1.0\powershell.exe -PSConsoleFile "C:\Program Files\VMware\Infrastructure\vSphere PowerCLI\vim.psc1" -command "connect-viserver MyVC | out-null; Get-VM"
Have you set the execution policy for PS?
Make one
Get-ExecutionPolicy
To change you could do
Game-ExeecutionPolicy RemoteSigned
Just do it once.
-
Need help please this script... LucD? :-)
Everything works as expected, but I have a problem with the two parts of the script. They are the bits where he itterates the NETWORK card and hard drives (pink and blue sections below).
Problem with the NIC (Pink) loop - it only shows nic 0, and if there are multiple network cards - they are not out in the CSV file. Also returns only 0 NETWORK adapter MAC address and not the other nic MAC addresses...
Problem with loop (blue) disc - it returns only the first TWO discs even if some of my VM 4 or even 5 discs...
No idea why this is happening. This script is not my work, but I found it very useful for what I need...
Script:
Claire
$VirtualCenter = Read-Host "Enter the Virtual Center server name".
$FileLocation = Read-Host "Please Enter full Path and file name to save the output. Must end in .csv or .txt.
$Cred = get-Credential
SE connect-VIServer $VirtualCenter - Credential $Cred
$stats = @)
#Uncomment the two lines if you want to inventory just a cluster instead of all the VMS in vCenter
#$VMCluster = Read-Host "Please enter the name of the Cluster.
#$ServerList = get-VM-location $VMCluster
#If the two given lines are deleted, then comment out the following line
$ServerList = get - VM
{Foreach ($Guests to $ServerList)
$Guest = $Guests.Name.ToUpper)
Write-Progress-activity "Create VMware Guest Inventory" - Status "Treatment VM guest $Guest" # display progress bar
$VMGuest = get - VM $Guest | Get-View
$VM = get - VM $Guest
$ESXHost is (get - VM $Guest). Host.Name.ToUpper)
$VMHost = get-vmhost $ESXHost | Get-View
$row = new-Object System.Object
$row | Add-Member-Type NoteProperty-name 'Guest' - value $VMGuest.Name.ToUpper)
$row | Add-Member-Type NoteProperty - name "Power status" - value $VM. Guest.State
$row | Add-Member-Type NoteProperty - Name "Guest OS full name"-value $VM. Guest.OSFullName
$row | Add-Member-Type NoteProperty-name "Comments RAM (MB)" - value $VM. MemoryMB
$row | Add-Member-Type NoteProperty - Name 'Comments vCPU Count' - value $VM. NumCPU
$row | Add-Member-Type NoteProperty - name "Guest VMTools status" - value $VMGuest.Guest.ToolsStatus
$row | Add-Member-Type NoteProperty-name "Guest VMTools Version" - value $VMGuest.Guest.ToolsVersion
$row | Add-Member-Type NoteProperty - name 'Guest status VMTools Version' - value $VMGuest.Guest.ToolsVersionStatus
$row | Add-Member-Type NoteProperty - name "Comments VMTools status running" - value $VMGuest.Guest.ToolsRunningStatus
$NICCount = 0
ForEach ($vNic in $VM. Guest.Nics) {}
$NIC_IP = "Guest IP Address for the NETWORK adapter" + $NICCount + "."
$NIC_MAC = "MAC address of Guest for the NETWORK adapter" + $NICCount + "."
$NIC_vSwitch = "Guest vSwitch network for the NETWORK adapter" + $NICCount + "."
$row | Add-Member-Type NoteProperty - name $NIC_IP-$VMGuest.Guest.IpAddress value
$row | Add-Member-Type NoteProperty - name $NIC_MAC-$vNic.MacAddress value
$row | Add-Member-Type NoteProperty - name $NIC_vSwitch-$vNic.NetworkName value
$NICCount ++
}
$DiskCount = 0
$DT = @)
ForEach ($vDisk in $VM. Guest.Disks) {}
$DriveLetter = 'Comments Drive' + $DiskCount + ' ".
$DriveSize = 'Comments Drive' + $DiskCount + 'size '.
$DriveFree = 'Comments Drive' + $DiskCount + 'free space '.
$vDiskCap = [math]: Round (($vDisk.Capacity)/1 GB)
$vDiskFree = [math]: Round (($vDisk.FreeSpace)/1 GB)
$row | Add-Member-Type NoteProperty - name $DriveLetter-$vDisk.Path value
$row | Add-Member-Type NoteProperty-name $DriveSize - value $vDiskCap
$row | Add-Member-Type NoteProperty-name $DriveFree - value $vDiskFree
$DiskCount ++
$DriveTotals = "" + $row. $DriveLetter + "" + $row. $DriveSize + ';
$DT += $DriveTotals
}
$row | Add-Member-Type NoteProperty - Name 'Host name' - value $VMHost.Summary.Config.Name.ToUpper)
$row | Add-Member-Type NoteProperty - name 'number of Sessions on the host' - value $VMHost.vm.Count
$row | Add-Member-Type NoteProperty - Name "Is a member of the host Cluster" - value (Get-Cluster - VMHost $ESXHost). Name.ToUpper)
$row | Add-Member-Type NoteProperty - name "Hosting provider" - value $VMHost.Hardware.SystemInfo.Vendor
$row | Add-Member-Type NoteProperty - name 'Model home' - value $VMHost.Hardware.SystemInfo.Model
$HostRam = [math]::Round(($VMHost.Summary.Hardware.MemorySize)/1Go)
$row | Add-Member-Type NoteProperty - name 'RAM to host' - value $HostRam
$row | Add-Member-Type NoteProperty - name "CPU model of home" - value $VMHost.Summary.Hardware.CpuModel
$row | Add-Member-Type NoteProperty - name 'number of CPU host' - value $VMHost.Summary.Hardware.NumCpuThreads
$row | Add-Member-Type NoteProperty - name 'The host CPU speed' - value $VMHost.Summary.Hardware.CpuMhz
$row | Add-Member-Type NoteProperty - Name 'Name of the product to home' - value $VMHost.Summary.Config.Product.Name
$row | Add-Member-Type NoteProperty - name 'Version of the product to home' - value $VMHost.Summary.Config.Product.Version
$row | Add-Member-Type NoteProperty - name of the Generation of product to home' - value $VMHost.Summary.Config.Product.Build
$row | Add-Member-Type NoteProperty - name of the "Service Console to host" - value $VMHost.Config.Network.ConsolevNic [0]. Spec.IP.IPAddress
$row | Add-Member-Type NoteProperty - name "the subnet mask of Console Hosting Service" - value $VMHost.Config.Network.ConsolevNic [0]. Spec.IP.SubnetMask
$row | Add-Member-Type NoteProperty - name of the "Service Console 1 to host" - value $VMHost.Config.Network.ConsolevNic [1]. Spec.IP.IPAddress
$row | Add-Member-Type NoteProperty - name "the subnet mask of Console 1 Hosting Service" - value $VMHost.Config.Network.ConsolevNic [1]. Spec.IP.SubnetMask
$row | Add-Member-Type NoteProperty - Name "vMotion Host IP Address" - value $VMHost.Config.vMotion.IPConfig.IpAddress
$row | Add-Member-Type NoteProperty - Name "VMotion the subnet mask of the host" - value $VMHost.Config.vMotion.IPConfig.SubnetMask
$stats += $row
}
$stats | Export-Csv-Force. \$FileLocation - NoTypeInformation
Invoke-Item. \$FileLocation
Thanks for your help
PS. I'm a complete NOOB with Powercli, so try to find my way around it yet.
PPS - if someone has a better VM inventory script - please be so kind as to pointing me to it...
Thought as well, but I'm afraid he wil cover the possibilities.
Assume the following:
VM1, 3 cards, 2 hard drives
VM2, 2 cards, 5 hard drives
The order will be VM1, VM2 with the effect that you get 2 hard drives for VM2.
The alternative I came with us to make Dummy entries and always use the maximum columns for network cards and hard drives.
If you want to get
NIC1 NIC2, NIC3 HD1 HD2 HD3 HD4 HD5
VM1 x x x x x na na na
VM2 x x na x x x x x
See if it works for you.
-
This script takes copies of the Image?
RDBMS version: 11.2.0.3
Platform: AIX 6.1
Is the below mentioned the backup script taking copy of the image? What is the type of backup that is used in this script?
-Another question on the above scriptrecover copy of database with tag daily1 until time 'sysdate - 1'; backup incremental level 1 for recover of copy with tag daily1 database; backup as compressed backupset archivelog all not backed up; allocate channel for maintenance type disk; delete noprompt obsolete device type disk; release channel;
If a data file is lost, would I be able to quickly restore, recover by using the following commands, if I use the above backup script?RMAN>sql ‘alter database datafile 7 offline’; RMAN>switch datafile 7 to copy; RMAN>recover datafile 7; RMAN>sql ‘alter database datafile 7 online’;
This is the strategy of "Update backups gradually" what Oracle documents, but some of us are not comfortable with.
See http://docs.oracle.com/cd/E11882_01/backup.112/e10642/rcmbckba.htm#CHDEHBFF
Why I'm not comfortable?
(1) it causes the local backup on the database server - that is to say on the same SAN as the target database! (unless you connect two different San on database server)
(2) it provides only 1 backup of the database to be available at any time (unless you do religiously the backups from this location on tape every day)
(3) it offers the opportunity to move to the last backup, but not older backups (unless make you backups on tape and so make sure that you have backups of image on different days on different bands).It is too easy for a DBA / SA to not follow the three recommendations 'less' I added.
Hemant K Collette
-
How to run this script on all my hosts at the same time?
Greetings. I have this script that tells me that the status of the HBA device path (dead, active). But it takes forever to run on all my guests, as it does every one host at a time.
How can I get that it is running on all hosts at the same time?
Use: Get-HBAPathStatus VMHosts *.
Thank you!
Function Get-HBAPathStatus ($InputVMHost) {}
$vmhosts = get-VMHost $InputVMHost | Name sort{foreach ($vmhost to $vmhosts)
Write-Host "* $vmhost."
Write-Host "Please wait...". Checking the paths... »
$hbas = get-VMHostHba - VMhost $vmhost
$pathStatus = $true
{foreach ($hba to $hbas)
$scsiluns = get-ScsiLun - Hba $hba
{foreach ($scsilun to $scsiluns)
If ($scsilun - not $null) {}
$paths = get-ScsiLunPath - ScsiLun $scsilun
{foreach ($path in $paths)
Write-Host - NoNewline ". »
if($Path.) State - eq 'Dead') {}
$pathStatus = $false
}
}
}
}
}
{if ($pathStatus)}
Write-Host "
Write-Host "$vmhost is ok" - ForegroundColor "green".
}
else {}
Write-Host "
Write-Host "$vmhost death paths." - ForegroundColor 'red '.
}
}
}Be sure to use the 32-bit version of PowerShell and PowerCLI with the Start-Job cmdlet.
Labour will fail with the 64-bit version.
See the thread disable asynchronous paths for more information.
-
Types of lists vNic script PowerCLI
Does anyone know script PowerCLI export the following information in an Excel spreadsheet?
1. the virtual computer name
2. IP address
3. Mac address
4 port Group
5. type of virtual network adapter (vmxnet3, E1000, etc.)
Number 1 and number 5 are the most important for us at this immediate moment. I have to identify the virtual machines do not have vmxnet3 adapter, so we can change them. Thanks in advance.
Try this
Get-VM | Select Name, @{N="IP addr";E={[string]::Join(',',$_.Guest.IPAddress)}}, @{N="MAC addr";E={[string]::Join(',',($_.Guest.Nics | %{$_.MacAddress}))}}, @{N="Portgroup";E={[string]::Join(',',($_.Guest.Nics | %{$_.NetworkName}))}}, @{N="NIC type";E={[string]::Join(',',($_.Guest.Nics | %{$_.Device.Type}))}}
-
When I run mozilla, mozilla does not open because this script.
Script: chrome://tavgp/content/libs/include.js:595
worried about the computer. After the computer asks me to stop this script, mozilla opens, but I have to wait for a long time.Help, please!
Robert
You must disable the "AVG Safe Search" so that that to go that it is related to "AVG FREE". See problematic Extensions, you don't want the extension is running, you must at least disable the extension. To avoid future problems, you must reinstall AVG Free without the link scanner component such as mentioned in the comments related to
-
stop running this script?
I get a message. "stop running this script? A script on this page slows down IE run slowly. If it continues to run, your computer may become unresponsive.
How can I identify and remove the script?
You can not. The script is on the Web page. If it gives you an option to stop it, do so.
-
I have an older browser. If I disable the compatibility mode, what would you do? Please, I beg you! What should I do to stop this script to run at facebook?
Hi Jacqueline,.
What browser do you use?
If you turn off your Internet Explorer compatibility view, some Web sites may appear to be blank or will not display correctly.
If you receive the error message in Internet Explorer, you can follow this link and check if the problem persists:
How to troubleshoot the script errors in Internet Explorer on Windows computers?
Hope the helps of information.
-
Message "stop running this script?
I get a message asking me to "stop running this script" when I go to Yahoo to check my mail. I never received that message before today and I used Yahoo so busy Explorer for years. I disable the filter XSS, but that did nothing. I ran Internet Explorer troubleshooting, but has nothing to do. How can I get rid of this message, because it prevents me from my mail or do anything on Yahoo?
It's a Yahoo! (Server/webmail) mail worldwide problem.
See: Internet Explorer problem? and this thread, etc.Cordially.
-
Why I constantly get a message that says... "Stop running this script?"
I constantly get a pop of message asking me if I want to "stop running this script"... a script on this page slows down Internet Explorer runs slowly. It happens on Facebook, no matter what I do, be it games or on the FB homepage.
Follow this article http://support.microsoft.com/kb/175500
Kind regards
Maybe you are looking for
-
Satellite A660-07 s - how to fix ERROR 6006 DAE
I have a music system Digidesign 003 Rack, it is a product of AVID.I need the software Protools 8.0.4 for this. I recently bought a Toshiba Satellite A660 07 s with geforce GT 330 M graphics card and windows 7 o/s.I installed the 1394 to firewireport
-
I was wondering if the gyro for the stabilization mechanism can be locked mechanically as it seems it will get damaged. You can always hear it move in the unit even when turned off or disabled. Also is there a way to adjust its parameters so it can b
-
Title: Hardware failure My Dell hardware scan failed the Smart short Test and gave me an error WHD16-K8B and says 'failure may be imminent. What can I do?
-
Q10 of blackBerry software update failed
I tried to update my software (version 10.2.1.2977), but every time I do it just indicates the update has failed. Access to internet is very good and it is connected to a power source, but nevertheless does not seem to work.
-
I paid for 1 year of Photoshop.i have a card.adobe want me to pay again?
I paid for 1 year of photoshop 2016 - 2017.why I'm being as to repay. I read on the Adobe website, can I use it on two computers.