is this setting for VMs cpu limitation cause performance hit for ESX server?

Similar Questions

• I tried to find this scanner for Windows Server 2003 Standard Edition software, but even now, I'm not find software scan. Printer model: HP 3390 Laser jet

  tried to find this scanner for Windows Server 2003 Standard Edition software, but even now, I'm not find software scan.
  Printer model: HP 3390 Laser jet

  I don't want the drivers.  I mean the software.  The drivers you get from the page server 2003 and the software from the page I referenced.   Otherwise, you need to contact HP, as they provide that software, not Microsoft.

  Steve

• Implementation of the array for esx server

  Hello everyone:

  This is my first post here, and I'm a newcomer to virtualization. I've seen given the task of putting in place an esx server. Now, I need to configure a processor computer double hearts HP DL380. I need to set up a 20 GB partition for esx and the rest of the disk space for the second partition for the VMs.

  My question is, what is the best configuration of raid for this scenario.

  Thank you.

  The best option will be to go for RAID 5 (HP RAID DDG), if you want a higher level of redendany (2 disk failures) go for RAID ADG (RAID 6). I recommend that you create a table and two driving logic. A first for the ESX operating system and second to the VMFS. VMFS to allocate a larger share.

• Character limit for ESX server name

  Hey everybody-

  Is could someone please tell me what the character limit for the server host of naming for ESX 3.5 Update 4 host computers?     I'm trying to figure whether to apply the limits of Unix (we have a new company naming convention)

  Thanks in advance!

  Steve

  see this KB article

  http://KB.VMware.com/kb/1000064

• from the beginning in order to improve safety, I would answer "never" when asked if I wanted to save password in Firefox. Is it possible to reverse this setting for a web site?

  How do I "reverse" one 'never save' password to a Web site?

  You must delete the record except for password for this Web site. Follow the instructions here: https://support.mozilla.com/en-US/kb/Username%20and%20password%20not%20remembered#w_password-manager-settings

• services.msc logs under "Local System account" instead of "This account" (previous setting for all) on WinXP SP3

  Just recently had problems to Windows Update and Windows Installer that were solved by Maurice N.  When you restart the Windows Installer service (again), I noticed that all the services loading of ' run: services.msc' happen under the Local System account. "  Is this a problem?  Found the remarks after a search online, which implies that it is not a good idea.  Previous setting was 'This account' suggestions on the evolution of this return?  I tried to change, but nothing happened.

  The Windows Installer Service must be on the Local System account.  I would fix the manual start, since he does not need to be put forward at every reboot and it works day and night to do nothing.  If you set it to manual, it will start when it needs start.

  This is true for many Services - as in Help and Support for example.  The 'experts' Support committed by Microsoft engineer will tell you always for this set to automatic, but it the Manual value and you will have more memory and CPU to the things that really matter.

  Please provide a link to the Web pages where read you otherwise.

  If you want to learn more about the Services of XP, I was looking at the site WWW Viper Black here.  Chances are that you have many Services running, you can do without.

  Depending on how much Service tweaking you did on your system and which components you have installed, you should define most of all THE Services to the Local System account.

  On my system, sort the list of services by the "Log on As" column, the exceptions referred to in this PROVISION of account/NT would be:

  Customer DNS (automatic)
  Performance logs and alerts (disabled)
  Remote procedure call (RPC) (automatic)
  Remote Procedure Call (RPC) Locator (manual)
  Windows Media Network Sharing Service (disabled)

  You can have more or less depending on what you have installed.  If you are not sure, ask.

  P.S. The technician 'expert' advice of technical support to run sfc/scannow has absolutely nothing to do with it.  It's just another one of their wild goose hunting support technician to receive credit for responses with links to KB articles that have nothing to do with your problem and will only waste your time.  You describe not as symptoms suggestive of a corrupt user profile.  It's a real shame.

• 'Custom actions' of the CPU in the Resource Pools: should I also set the VMs child on "custom"?

  Hello world

  Imagine a VMware vSphere 4.1 cluster managed, of course, by vCenter Server, with some 4.1 ESXi hosts.

  This cluster has 3 Pools of resources: development, Production, quality

  Now consider that the Resource Pools have been initially implemented in the following way, about the 'actions' for 'CPU resources':

  -Development: Shared low =

  -Quality: Sharing = Medium

  -Production: Sharing high =

  Several virtual machines were placed in the Resource Pools. Some virtual machines are single vCPU, but others are vSMP ones: some have 2 vCPU and some of them have 4 vCPU.

  Now, I read the following articles of the (large) put at disposal by Duncan Epping, VMware, in his blog "Yellow brick", on "Resource Pools" and actions:

  The Resource Pool priority-Pie Paradox - yellow bricks [written by Craig Risinger]
  http://www.yellow-bricks.com/2010/02/22/the-resource-pool-priority-pie-paradox/

  Actions on Resource Pools

  http://www.yellow-bricks.com/2010/12/14/shares-set-on-resource-pools/

  Actions on a Resource Pool, custom scripted

  http://www.yellow-bricks.com/2010/02/24/custom-shares-on-a-resource-pools-scripted/

  Now, imagine that I have manually changed several Pools of resources from low/normal/high "Custom" and gave them the following values:

  -Development: 3000

  -Quality: 6000

  -Production: 9000

  The virtual machines inside each Resource Pool appear to be all set up to 'Actions' = 'Normal '.

  I want to know is this:

  1 - since I changed Resource Pool shares 'Low' / 'Normal' / 'High' to 'Custom', I should / need to change the 'actions' in each individual VM from "Normal" to "Custom"?

  2 - I'm guessing that the sum of the actions of all virtual machines in a Resource Pool must be equal to the actions that I gave to this Pool of resources. Am I wrong?

  3 - I also guess that the only practical way to make this change to Virtual PCs, if necessary, is to generate scripts, preferably using PowerCLI. Friend, I have right?

  Thanks in advance!

  See you soon,.

  Ricardo

  Whatever resources the resource pool level are applicable to this pool of resources and will get the part accordingly. So that resources will be divided between the virtual machines according to the shares they hold.

  Example:-two pool of resources A and B.

  Total cycles CPU = 10000 Cycles CPU

  A part (custom set) = 6000 CPU Cycle.

  Part B (custom set) = Cycle CPU 4000.

  Now a resource pool has three virtual machines powered with shares.so high normal and low on this desire to cycles CPU 6000 cases divided among them in 4:2:1

  VM1 have = 4 * 6000/7 = 3428 cycles cpu.

  VM2 will get = 2 * 6000/7 = 1714 cycles cpu.

  Vm3 will get = 1 * 6000/7 = 857 cycles cpu.

  so according to your requirement, you can change your actions at the level of the virtual machine.

  PS:shares come into picture when there is a conflict.

  HTH

• You have reached the maximum of pages in this set of results of content. If you are looking for something specific, try applying a filter of content type or enter a search term.

  I get error frequently below.  In General, when you navigate on old posts on the forum SQL and PL/SQL, after reading a post, I click on the left arrow in my Firefox browser, which I expect to take me to the page of the posts that I had.  Instead, I get a page with no messages.  I then click on a forum page numbers in the upper right corner.  Sometimes brings back me to the page that displays the list of the posts that I had.  However, more often I get the below error.  So try to navigate from one position to another is desperately slow.  You can fix this?  Everybody brings a work around to be able to get from one station to another, or at least back to old messages without the error page?  This is a problem that happened before and after the upgrade.

  "You have reached the maximum of pages in this set of results of content. If you are looking for something specific, try applying a filter of content type or enter a search term. »

  Have you tried right-click (ctrl-click on Mac) and choose 'Open link in a new tab' instead? With all the dynamic html today browser back and before options are often dead still. If you open links in a new tab or window, you can simply close the window instead of using the back button. It may take awhile to get used to it, but there are some benefits, such as the loading of the pages in the background, and you do not lose the focus of the page where you. You can disable "when I open a link in a new tab, swtich it immediately." If I understand your problem, maybe it works better.

• When using the spot removal tool the sampled area is no longer present, is there a setting for this?

  When you use the remove spot tool to view the sampled area but is more. Is there a setting for this? I use a Mac and Lightroom 6.2.1

  Hi mikec,.

  Greetings!

  H key

  Concerning

  Jitendra

• Change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  I have problems with a client of VMware image-level in an EMC Avamar backup.  So far, we have not been able to find information about this message in the backup log file.  It is originally the backup to take a very long period of time (on average 10-11 hours).

  2014-02-28 14:20:57 avvcbimage < 14681 > Info: change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  We cannot determine why CBT is "denied".  Has anyone here run across this issue before or seen any other type of backup VMware image have denied CBT?

  Everything I checked watch that CBT is successfully activated since the file vmx for the customer to the Avamar config.

  ESXi host is Enterprise Plus 4.1.0 260247

  After spending some time on this issue, the ultimate resolution withdrew the Avamar vm and then add it again.  After that, CBT began to work properly.  It seems that there is a parameter that has been 'stuck' pertaining to this virtual machine that wasn't behaving properly.

• HP Pavilion 15-p159na - where the keyboard backlight is set for this light?

  Can anyone tell me please where to locate the backlight on the keypad to the computer laptop 15-p159na Pavilion.  I want the backlight turns on but cannot locate this setting anywhere.  Thank you.

  This means that there are no backlit keyboard installed if you don't see the icon that I have indicated in the following image. Normally, the icon will light when the backlight is off. There is no way to activate or disable the backlit keyboard in BIOS.

  

• Re: Satellite C660-2R3 CPU limitation to 978 Mhz?

  Hi all

  5 days ago, I bought a Toshiba Satellite C660 2R3.

  The laptop has core i5 2.4 GHz and 6 GB of DDR3 memory.
  However, I am very disappointed by its performance.

  I run CPU ID/CPU-Z and it turns out that the laptop is limitation up to 978 MHz Core speed to 99 MHz, Bus speed.
  I checked the Bios setting for the purpose of limitation of decommissioning.
  But was surprised to see there is no option to do so.
  You have only a LOW constant and automatic something.

  WHY TOSHIBA? WHY?
  Its like buying a Ferrari, but you can only drive at 50 miles per hour?

  Does anyone know of a work around that? I would appreciate your help.

  Thanks in advance.

  Hello

  You are right. The laptop seems to support the Intel Core i5 - 2430M processor with Intel Enhanced speed Step technology.

  Enhanced Intel speed step technology allows the system to dynamically adjust the frequency of voltage and average core processor, which can translate into a reduction in consumption and a decrease in heat production average. This is the reason why the CPU does not always work at the highest level, but this speed depends on its use for laptop and it will be adjusted automatically by the system

• I can get the data of a hygrometer using the RS232 port with the following T75.2F:H17.0% using a RS232 data logger format. I was wondering if I can collect this data for later analysis using Dasylab. Any help is appreciated.

  I can collect data from a hygrometer in a text file using the RS232 port with the following T75.2F:H17.0% format, these data are collected using a data logger software. I was wondering if I can collect this data for later analysis using Dasylab. Any help is appreciated.

  The setting below causes the error. Change for the second selection, output values of all channels.

  

• Many sub-strategies and transform sets for peer 1 tunnel?

  Recently acquired a heavy ASA company, with network administrators.  They seem to stand for some things to ASA I don't understand quite below.

  This is one site talked, and there's only 1 tunnel on this subject on the hub. This tunnel appealed to the transformation of named sets ""ESP-3DES-SHA "&"ESP-3DES-MD5." " That said, why have they configured transform sets for AES 256, AES 192, AES and if they ask only 3DES transformation sets in the card encryption?  The sub-strategies down from the extract of seem to have something to do with it, but if that were the case, wouldn't you call all transformation configured in the encryption card sets to perform fully all sub-strategies set in this config, because each set of sub-policy puts the encryption to a different type / method?

  Excerpt from the configuration:

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit

  card crypto outside_map 1 match address outside_cryptomap
  card crypto outside_map 1 set of peer XX.XXX.XXX. XX
  card crypto outside_map 1 set ikev1 transform-set ESP-3DES-MD5 SHA-ESP-3DES

  outside_map interface card crypto outside

  IKEv1 crypto policy 10
  authentication crack
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 20
  authentication rsa - sig
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 30
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 40
  authentication crack
  aes-192 encryption
  sha hash
  Group 2
  life 86400

  IKEv1 crypto policy 50
  authentication rsa - sig
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 60
  preshared authentication
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 70
  authentication crack
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 80
  authentication rsa - sig
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 90
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 100
  authentication crack
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 110
  authentication rsa - sig
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 120
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 130
  authentication crack
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 140
  authentication rsa - sig
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 150
  preshared authentication
  the Encryption
  sha hash
  Group 2
  life 86400

  Only the transform-set called card encryption will be used. Policies will be judged by priority until a correspondent of the hub is found. Ideally, it would be first.

  You're right for the use case you describe only a single defined and political transformation is necessary. Multiples are often the legacy of the settings by default and, sometimes, an attempt to standardize with each set of transformation and the policy on the ASAs so that no matter where they end up connect to the necessary building blocks are in the config. However, it causes a lot of unused lines.

• Gmail and all the others crash in "Oops!" Google cannot load this page for some reason any

  I am running 10.10.5 and Firefox 41.0.2. Sophos said me no problem.

  In case of Gmail or any other program running in Firefox, the program stops to the message of the screen;
  "Oops!"

  "Google can not load this page for some reason any."

  The box Try Again has no effect.

  However the use of "Most visited" (top of the line LH of Firefox screen) returns to place that quit, without loss of data

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  If the deletion of cookies did not help, then it is possible that the cookies.sqlite file that stores the cookies has been corrupted.

  • Rename (or delete) cookies.sqlite (cookies.sqlite.old) and if present remove cookies.sqlite - shm and cookies.sqlite - wal in the Firefox profile folder in the cookies.sqlite case has been corrupted.

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox