Is this system or virus?

Similar Questions

• Windows server 2008 standerd edition I m shows no icon of system after virus infection can u help me for this

  Windows server 2008 standerd edition I m shows no icon of system after virus infection can u help me for this

  Colinet

  Hi DilipkumarShah Comeau,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Forum TechNet (Windows Server)

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope this helps.

• System Tools virus removal I am trying to remove this virus from a computer, any help would be nice thank you

  I acquired the SYSTEM TOOLS VIRUS on a computer and I tried to use the CA virus removal by my C drive a slave and she drive scan from another drive, it worked on an infected drive before but CA will not see it any suggestions will be useful thanks.

  This page should help:

  http://www.bleepingcomputer.com/virus-removal/remove-system-tool

• Star Wars Special Edition Note: This system is not supported

  I need help for the Star Wars content on my laptop special edition of Star Wars.  I had to have my hard drive is erased after it got a virus and for some reason any now when I installed the Star Wars command center it tells me "this system is not supported. What should I do to get back what I lost and how do I get the command center working again?

  Hey @JudyInCT,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with Star Wars software on your laptop. I can help you with that, but I need the model number of your laptop first. You can find the model number in this link. Once I know that I will be better able to help you.

• Cannot install KB980182 + 17 other updates - error 0x8007371c or "does not apply to this system".

  I am running Vista Home Premium with Service Pack 2, 32-bit. For example, I have the 8.0.6001.18828 version. I use AVAST AV and Comodo Firewall. I've never had McAfee.

  I have 18 'Important' Windows Vista updates will not be installed: several updates, several windows Vista updates, etc. Back to 08/12/09 and 27/04/10 the most recent. They start to add up. Here is a screenshot of them:

  http://img94.imageshack.us/img94/5003/updatesl.PNG

  For about 11 of them, let's say in the meantime (until restarted), but then after the resumption, that they do not have to install but have no error code. The event viewer indicates that they are 'not applicable for this system' (then why they have been downloaded?). Who does not apply are: KB905866 KB971468, KB972270 KB979683 KB978601, KB977816, KB978338, KB979099, KB974318, KB980248, KB980232.

  The rest of them, as (for example, KB980182) will fail because of an error of 8007371 C. In Event Viewer, they all have a sequence of error similar to this one (it's for KB980182):

  ###

  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-39_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-38_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-37_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-2_neutral_GDR of packaging KB980182 (Update) in Staged (Staged) State
  ...
  [several other of these errors, with '2' to 36, even numbers only]
  ...
  11:11 - Installation failure: Windows failed to install the following update with error 0x8007371c: Cumulative security update for Internet Explorer 8 for Windows Vista (KB980182).

  ###

  Things I've tried:

  1. installation after a clean boot - at first, seems to be successful that I can get the list to the left of 1 or 2, but at some point given shortly after they all reappear.

  2A ran the System File Checker that comes up: "Windows Resource Protection has not found any breach of integrity."

  3 reset Windows Update components (manually or with the "FixIt" solution to http://support.microsoft.com/default.aspx/kb/971058?p=1)

  4. stop of services related to Windows Update, rename system folders, saving and then associated DLL files by restarting services (as described here: http://social.answers.microsoft.com/Forums/en/vistainstall/thread/ed275467-5580-41dc-9ccc-3c1e22c6fd28)-same result

  5 install in safe mode - gives me "Setup has encountered an error: 0x8007043c.» This service cannot be started in safe mode. »)

  6. scan the hard disk for errors (e.g., check disc) - Nothing found

  7. search for viruses, Trojans and malware - do not have

  8. install with UAC, anti-virus and firewall off the coast - same result

  9 install the upgrade preparation tool system for Windows Vista (KB947821) [January 2010] (with UAC, AV, etc off), but the installation 'failed' (no error code). Installation in safe mode it gives me the «...» "0x8007043c. this service cannot be started in safe mode."

  10. manually install them - same result

  A short circuit contact MS have exhausted the options?

  Thank you. This is not a beta or Release Candidate build both fuhgeddaboutit and open a free support incident.

  PS: I think you will find that the updates are not installed due to infection hijackware, Kurt.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• WinSAT error of this system have multimedia support

  Hello

  I have a problem with winsat.exe.
  I have this message when I run it:
  This system has no multimedia support for this operation.
  I use w7, and I can't find a solution. Do you know what I need to change to fix this?
  Best regards

  I still don't understand why don't you try two methods that I've listed instead, or what led you to try to do as you are.  If you have missing or corrupt files, you have a major problem and have work to do.  First thing I would do would be to get my updated virus checker, start mode without fail and doing a system scan complete.  If this does not help, I will try the system restore before that your problem started again to.  If this does not work, I would look through the system with the Event Viewer log.  After that if I didn't always know what to do, I would restore my full backup of the system (if you have one).  After that, I have to resort to restore my system to factory settings if I still had problems.

  I hope this helps.  Good luck.

• FF DOES NOT OPEN. SAYS IT IS 'NOT SUPPORTED ON THIS SYSTEM"USED TO WORK VERY WELL.

  Icon has disappeared from the dock, notice says "Firefox not is not supported on this system", the icon in the Applications folder has now a line circle and slash through it. That's happened? I tried to re - install and got the same result. Am running OS 10.4.11

  The latest version of Mozilla that works on the old 10.4 has Firefox 3.6.18. From Firefox 4.0 and newer Intel Mac and OSX 10.5 and newer is necessary to make it work.

  http://www.Mozilla.com/en-us/Firefox/all-older.html

  However since you use a PPC Mac there is an option of third parties to the http://www.floodgap.com/software/tenfourfox/

• I have several purchases through the iTunes Store on my bank statement and I don't know what they are for. Can you help me? Cannot maneuver through this system to see the purchase history.

  I have several iTunes Store purchases that appear on my bank statement and I don't know what they are for. Can you help me? I'm unable to maneuver through this system to view previous purchases.  I wonder if I pay for extra storage, it is always advising me that I'm pretty sure.

  Hello

  Open iTunes on your Mac and click your name (if you are not signed in, then sign to see your name). Then click on account information. Once you enter the account information screen, you will see a section called historical of purchases. Click 'View all' to see the list of purchases and the ability to watch the dates more.

  See you soon,.

  GB

• This system is available for the last update

  This system is available for the update for the last update: Mac OS X 10.6 Snow Leopard?

  Depends on what model of Mac you have. Choose about this Mac from the Apple menu, click details and compare the identifier of the model with the following, which are the first Macs of each type that can execute the Cougar and newer:

  iMac7, 1

  MacBook5, 1

  MacBookPro3, 1

  MacBookAir2, 1

  Macmini3, 1

  MacPro3, 1

  Xserve3, 1

  A Mac older than those listed including the Core 2 Duo (not Core Duo) or better CPU and at least 2 GB of RAM can run 10.7 Lion, which is available by clicking here. No more recent than 10.6.8 operating system supports the PowerPC software such as Microsoft Office 2004.

  (138837)

• Qosmio X 300 - this system cannot use Toshiba Accessibility

  I managed to install all Qosmio X 300 drivers on Windows 7 64 bit. Everything works fine except this one: 'Toshiba Accessibility. When I click on a button of 'Access', I get this error message:

  "This system cannot use Toshiba Accessibility"

  I get this and what is this feature?

  Hello

  I agree with the user above. I think you didn't install Toshiba Value Package added but it is necessary to other tools to operate. You can download it on the Toshiba site so take a look at it again.

  Check this box!

• BIOS update failed: the process does not have this system. The process of the utility is not complete.

  I have a Thinkpad T450s and I'm trying to update the BIOS version 1.19 to 1.20. I've created a live usb with the 'el tortio' - image extracted using linux "dd". Once I boot on the USB under Legacy-BIOS and select upgrade, it proceeds witht the error message "the process does not have this system. The process has been cancelled. "I have disabled the protection against theft, AMT (I think this is the option) and I'm sure that I use the correct .iso file from the downloads section. I don't have a Windows operating system installed, but I'm able to start in various linux distributions using Legacy and UEFI methods.

  Here is my BIOS information.

  "Manage 0 x 0031, DMI type 0, 24 bytes.
  BIOS information
  Seller: LENOVO
  Version: JBET54WW (1.19)
  Release date: 06/11/2015
  Address: 0xE0000

  Runtime size: 128 kB
  ROM size: 16384 KB
  Features:
  PCI is supported
  PNP is supported
  BIOS is extensible
  BIOS shadowing is allowed
  Boot from CD is supported
  Selectable boot is supported
  ACPI is supported
  Legacy USB is supported
  BIOS boot specification is supported
  Targeted content distribution is supported
  UEFI is supported
  BIOS version: 1.19
  Firmware revision: 1.2 "

  What could you suggest to get the update disc to recognize my system?

  I think I've fixed the problem, I formatted FAT16 USB drive and not in FAT32 and also when you use the geteltorito command, it is preferable to use the-o option rather than a redirection ">"syntax. " An article said that it is best to drop in a DOS command line using the USB boot, then run dosflash.exe from there, however, I could not edit the .bat file, but it is an option however.

  I hope this helps someone stuck in a similar situation.

• SL500 "this program does not support this system.

  I have an SL500 with 64-bit windows system 7. He has a new system installed. I have correctly installed all necessary drivers. Now, I'm not able to install elements of followind with the system update utility:

  ThinkPad ultranav driver for windows 7

  ThinkPad hotkey features integration pilot

  ThinkPad Ultranav utility

  If I try to manually install, I get an error message "this program does not support this system.

  I had the same problem with Version 3.84.1500 of the driver Thinkpad hotkey features integration

  (and the latest version of 3.84.2000)

  This is a faulty installation.

  2 the missing files.

  Solution to what Lenovo fixes installation:

  Download and install the latest version.

  Download and install the 3.81.0100 version.

  Copy the files SWI32.sys and SWIX64.sys of the 3.81.0100 in the folder version corresponding to the most recent version.

  Run setup.exe from the most recent version.

  According to the properties file SWI32.sys and SWIX64.sys are used as 'System Information Detector'.

  No wonder we get the error message "this program does not support this system.

  Lenovo, please fix.

• Why said MAX % 22The list dial on this system is empty % 22% 3F

  I generate and deploy a real-time data acquisition and control system using LabVIEW RT (2012 SP1) and a PXI controller.  I tested my software and it works very well, now that I understand how to generate stand-alone executables for the host systems and target RT.

  Because of a bug on the side of RT (which I hope I have fixed now), I needed to 'rebuild' my PXI controller, reinstall software related and LabVIEW RT and reconfigure all the tasks of MAX (version 5.5).  To save the Configuration (and simplify reconfigure tasks and channels), I tried to export the configuration using the Configuration max Export Wizard.  However, he had a few (minor?) inconsistencies in some of the features (for example, NOR-488. 2), between the host and remote systems that generated errors.  I was able to fix this by asking MAX to do a Reset Configuration data on the host computer, and these problems went away.

  After exporting the export NI Configuration for my PXI file, I decided to use MAX to create reports on remote PXI and my host systems.  While considering the report of the PXI, I noticed that the last entry in the report, entitled 'Security', reads as follows:

  "The distance on this system access list is empty. This means that no remote system has access to this system. »

  What does that mean?  Where is the "remote on this system access list', and how is it maintained?  Note that I have not (yet) tried to deploy my project (formerly-work) to this controller (rebuilt), but I did not bring changes in LabVIEW, himself.

  If I look at the properties of the target of RT project, the VI server properties show (still) active TCP/IP (port 3363) with Machine access granted to "*" (all machines) and, similarly, all exported were allowed access.

  Am I missing something?  Can I safely ignore the entry above security report generated by MAX, or is there a hidden setting that I need to find and change?

  Bob Schor

  Bob,

  I'm not sure about your situation, but it seems to me that it is connected to the 'Security' settings Please see using MAX, section "Logging into your System.

  Norbert

• HP COMPAQ 8200 Elite Micro Tow: Can you tell if this system has slots for SSD or hdd adapter necessary - & gt; SSD?

  Can you tell if this system has slots for SSD or hdd-> ssd adapter need?

  WIN INITIAL 7pro

  i5-4-core - 16GB - RAM - fresh install [new 1 TB HDD] 8.1pro win 10pro Win

  HP COMPAQ 8200 Elite Micro Tower

  P / N:XY139EA #AB7

  PURCHASED 07/03/2012

  For w10pro c: / recommend reinstall to ssd or migrate ssd or even is...?

  SSDS all have sons the same size and holes threaded on the bottom and sides.  They all use the same fine metric threads live short (short, so they don't lower).  These screws must come with the adapter, and I live in general using the lateral holes.  Parts of the adapter have threaded, 3 holes and you will use the back ahead and away from those for channels of the drive Bay.  If you look at each side of a standard 3.5 "HDD, you will see the same same spacing holes.

  Some jobs need the SSD to shift to the left so the orientation of the SSD SATA power and data ports match exactly where they would be if the current drive was a 3.5 "HARD drive clutter.  An example is the drive in a Z620 of drawers which accept 3.5 form factor devices "and slides of drawers in the deep part of the case and automatically mesh with ports of power/data SATA back inside.

  Jobs that fuel just a loose cable and the data cable for the SSD is really doesn't matter much if the SSD is an adapter which keeps it more centered or offset to the left.  I've seen cases where a disk HARD 3.5 "given in the lower Bay and a centered SSD is in the upper drive Bay and there was nearly not enough cable length to reach easily shifted left for drives staggered in the Center.  You can see in the photo below that the Garland of feeding on the HARD drive has two unused SATA power below connectors, and there is not a lot of room between them.

  The card you chose seems good... solid metal.  For the HP 8200 Elite CMT I have access to screws 4 total special 6-32 UNC silver HP threaded screw threaded back ahead and away from the screw holes on both sides of the adapter, and then you use the extraordinary end threads metric short screws mentioned above to fix the SSD to the adapter, as shown in the pictures of Amazon.  These HP silver screw 6-32 no metric I'm talking using Torx or flat screwdriver and their leaders are trained to slip into the channels of the drive Bay.

  There are also other designs which are designed specifically for some HP workstations that include mounts insulation rubber with the sliding mechanism.  I don't think you have that... Here is a picture of eBay one of the 8200 Desktop Elite CMT demonstrating the existence of space on the left for 8 of these silver screw to store, which 4 are missing and used on 3.5 "single drive, you see there.  Don't throw those... they are not something, you can go to Ace hardware and buy.

  

• Said updated stand-alone Windows Setup program do not apply to this system.

  I tried to download and reinstall the stand-alone windows installer, but get the message that no update available for this system or this download does not apply to this system.  Standalone Installer, I think it's a system XP instead of Vista Home Premium 32 bits of the system. How can I uninstall the stand-alone Windows Installer and install one for Vista?   Is it important that I have a desktop computer that has XP on it?  I also rename the laptop with the Vista program to my name. Is it relevant. I tried to reverse the name

  Hi Rockyakauke25,
   
  Welcome to Microsoft answers community forum!

  This day stanalone you trying to install?

  Try to install the update in safe mode.

  Try to install the update in safe mode and see if you are able to install. Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  To start in safe mode, follow the steps below:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2   , do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  Install the prerequisite updates before applying a new update that is installed sp 1 for a successful installation sp 2.

  See the link for download of SP1 and installation

  http://TechNet.Microsoft.com/en-us/Windows/bb738089.aspx

  Try to run the system update readiness tool before installing the SP1 or SP2.
   
  The system update tool:
  http://support.Microsoft.com/default.aspx/KB/947821
   
  A software update is available for the Windows Vista installation:
  http://support.Microsoft.com/kb/937287
   
  Then download and install Service Pack 2:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en
   
   
  Hope this information helped!

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.