Is WinServer 2008 is an integral part of Win7 Ultimate?

Similar Questions

• Unhandled exception, installation on TMS 14.1 under WinServer 2008

  Hello

  IM installation TMS 14.1 on Windows Server 2008 and at a time of installation, I get the error of bellows and the installation will stop.

  "Unhandled exception".

  Error number: 0 x 80131501

  Description: It was not possible to convert all or part of the references of the identities.

  The installation program will end now.

  

  Hello

  You are trying to install MSD in a Portuguese language Windows Server, and that is not taken care of.

  If you see the same problem when installing an English server, please open a TAC case. This isn't a known issue.

  Kind regards

  Kjetil

• Adding two new Windows 7 work stations to the existing network of WinServer 2008

  I bought two new Windows 7 Professional - 64-bit (Dell Precision 3610) workstations. How to set up our server and domain? The server is running Windows Server 2008 R2 Standard. I must go to the permissions on the server to have new stations to be recognized? The new computers are the replacement of the existing jobs and will be connected to the ports of existing data.

  Thank you.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum
  http://social.technet.Microsoft.com/search/en-us/Windows?query=server%202008&refinement=1002&beta=0&AC=5

  Hope this information is helpful

• Speeds of slow transfer with Intel 1 GB/s NETWORK interface integrated, using Windows 7 Ultimate

  I have an Intel DX58S02 motherboard with on-board network 1 Gbps connections: http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/desktop-board-dx58so2.html.

  The computer is networked with other computers, but only the transfer to<100MB speeds.="" the="" problem="" computer="" is="" running="" windows="" 7="" ultimate="" while="" the="" non-problematic="" computers="" use="" windows="" 7="" home="" premium. ="" i="" have="" switched="" the="" cable="" with="" a functioning="" computer="" and="" we="" have="" eliminated="" the="" switch="" and="" network="" cable="" as="" potential="" sources="" of="">

  Someone at - it solved this problem of data transfer slow?  Is there a conflict with Windows 7 Ultimate and embedded 1 GB/s of this motherboard NIC or just badly configured settings?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• How can I work from my deskstop PCs, directly in a foledr shared under win server 2008 so that all my work is saved directly on the server.

  How can I work from my deskstop PCs, directly in a foledr shared under win server 2008 so that all my work is saved directly on the server.

  what I try to do is the following.

  I installed winserver 2008 on a machine and I created a folder for the individual. I want the individaul to connect in the folder ocreated on winserver 2008 directly from their desktop and laptop computers and their work so that all works are recorded directly on the server.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows Server 2008 on Pavilion h8-1170uk

  I am trying to run Windows Server 2008 on a Pavilion h8-1170uk. The software works ok but will not connect to the network. I found a thread on the forum to discuss a similar problem with the Pavilion p7 - 1227c, which recommends a link for the appropriate drivers. However, these drivers do not work on my machine because it has a Realtek network controller, while the p7 - 1227c has an Atheros one. Are there any appropriate drivers for my machine?

  Hello:

  The driver on the link below should work for you - a 6th on the list (Vista and WinServer 2008 Auto Installation Program (SID: 1568647)).

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• Desperate cry for help - Win7 and SBS 2008 sharing network/disconnections

  Hi all

  I am facing a problem of bad guy who frustrated me for several weeks now!

  Scenario:
  1 Windows Server 2008 SBS Premium Edition (not R2)
  Network share: \\Server\DBShare
  also mapped as J:\ on client computers
  Share contains some databases Access 2002 ("access xp") back-end (BE)

  2. customers: all diversified machines: XP, Vista, Win7, etc...
  ALL have Access XP (2002) installed (runtime) and run a horrible old 13 year front-end (FE) which has been spasmodic developing since 1997. It is mission critical and there is no budget to rewrite is because it is sprawling and has its hooks in each device, procedure, policy and activity that we do.
  Front-end is run locally, lies in the path of users % appdata %.

  Problem:

  Currently 8 x peripheral non-Windows 7 system to access every day, stay connected 24 hours a day and never give disk errors or network.

  ANY windows 7 machine is guaranteed to give disk or network error messages at some point - from 30 minutes to 15 hours by opening the front end and be left idle.

  NOTE: I was sent here on the forum to access because they thought that Win7 forum would be more appropriate. For non-access users, Access is like the Canary in the coal mine
  with regard to the problems of network connection. Even a slight network disturbance causes to complain about errors on the network and to require the connection to database
  to be re-created, data loss and potentially damage this database to the file system.

  I had all the world put in place using j:\variousdatabases.mdb, but read it as one
  Nono so I scripted a change in all the drives mapped to UNC paths in the
  connection of these tables property.  With this change, sometimes I just
  get an "odd" error disk or network, then am able to reconnect - but this
  bothers me terribly because 1. It can do damage to the db, 2. He
  means that I must write to this trap for more than 300 forms and even the management of errors
  so I think that there will be some things that I can't trap and 3. It is also SOMETIMES
  do not reconnect and I get messages repeated... or even an appcrash.

  When I say EVERYTHING, I mean I have 4 test devices: a work station, a Mini PC, a
  laptop and a netbook. This started as a 'test upgrade' to Win7 on the
  post work - but after this Show-stopping number, it became a desperate
  Troubleshooting jamboree, involving more than systems and other tests, because the
  solution seemed just around the corner.

  Now, a week later, I'm ready to give in on computeres forever and go live
  under a bridge, since I am unable to solve this problem and have already invested so much
  a lot of time into it!

  Here's what I think, that I decided to go out and why:

  Not a problem of network infrastructure.
  I can unlug a minipc with vista on it (same exact material) and connect it to the
  the ethernet port on a win7 test evil machines and it plugs.
  Fortunately for more than 24 hours. All the machines are on the same switch 24 ports. All the
  nonwin7 machines work as if in a dream, even when moved to the port/cable
  used by the machines of win7.

  Not a problem of a server NETWORK card.
  See above. Other devices not win7 Purring immediately without disconnecting.

  Not a server problem.
  SBS2008 works * Virgin * for the last 7 months. Only the reason for
  glance has been recently to try to resolve this problem of fools...
  All clients not win7 are happy as can be, always.

  The EM is not (apparently horrible?) dynamic TCP stack scaling or unloading on the
  SERVER.
  EVERYTHING in the driver for the card that could be discharged (and has been by default,
  no problem on other non-win7 clients) has been decommissioned. I also have
  off the chimney and any other devices of automatic setting on the server.
  (FYI - all STILL happy nonwin7 clients, server shows no significant increase)
  in the CPU usage)

  The EM is not (apparently horrible?) dynamic TCP stack scaling or unloading on the
  CLIENTS.
  Doing the same thing again on clients - auto tuning off the coast, where the unloading off
  possible. Latest installed NETWORK card drivers that give many options of unloading
  to turn off.

  No offline files
  These have been disabled on the server, on the client and in the group shares
  policy just to make a point.

  Not the MiniPc / the workstation laptop / Netbook / la
  Seems unlikely that all 4 would not work because of the material error AND
  drivers of offensive, but I ran out of ideas - so I photographed the MiniPC win7
  and put Vista on. To my great regret, the Vista OS on the same device works
  perfectly. Recreate the image of the OS Win7 and BOOM - same problem.

  No IPv6
  Disabled on the clients and the server

  No IPX/SPX
  Not installed on the server

  No network traffic
  (happens when I'm all but 5 computers off tension and nobody in the)
  Office as well in the middle of the day when users are 'use'.)

  Not the time of day
  Sometimes after 15 minutes in the middle of the afternoon or after 6 hours to
  04:32 - does not coincide with the events of on the server or the client error log, does not
  coincide with DHCP renewals (which are in 2 weeks)

  No server autodisconnect
  The value - 1 both server and client (I know that's irrelevant on the client))
  I also tried to add a ffffff keepconn regentry (I know that the stated max is
  64 k, but it doesn't help me have the connection after 18 hours.)
  FYI - no effect with or without the keepconn registry entries.

  Not be able to save
  4 machines, 4 different ranges of stuff randomly to stop turning out - of
  NICs for windows power plans to simply disable acpi. Problem
  continues

  Not my version of Windows 7
  Tried our company VLK Win7 and my personal copy of win7 ultimate
  and the NetBook win7 Home premium. SAME SAME SAME

  Not my drivers up to date
  MS stock on old machines drivers that are not built for Win7 show me the
  same error
  Laptop and Netbook (the latter preinstalled by the vendor) also give the same problem

  It is not that I do not use the drive\UNC.
  I ran a separate script that does just a DIR() on file every 10 seconds
  and yet, I finally get disk errors.

  It is not that I am not query the database and the connection is time
  There is a database search all 2 minues in PA to check new data in a table

  This isn't a field/roaming profile issue
  I tried logged as a domain with the profile user roaming user admin not now
  the area, officially added to the domain and even laptops PCs
  not registered on the domain.

  It's not the system restore
  Disabled on clients

  Is not SMB signing
  This is disabled in server group policy and still the same problem...

  Help, please!

  Any ideas would be much appreciated!

  Thank you in advance to help improve my new year! & Happy holidays to those of you luck is not to be this troubleshooting!

  Alex

  Thanks diana,.

  I tried my luck in the Technet Server forum you suggested.

  For others who want to follow my progress, here is the link:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/thread/0527a084-1953-47f0-ae83-febb52af14fc

  Happy new year!

• Why my computer date and time keep changing at 01/01/2008

  My friend has a computer problem.

  The date of his computer does not change since 01/01/2008, today's date. After the formatting as system, it is facing the same problem. He tried to change the date through the configuration of the BIOS. But after the reboot, the date is still helping 01/01/2008.Please. He got windows 7 ultimate SP1. Thank you for your patience for reading this.

  There is a battery on the motherboard that stores configuration information, including the date and time.  It seems that if this battery should be replaced.  Check motherboard of your friend or the system manual for more details - the battery is usually very inexpensive and easy to replace once found.

• Defective integrated slider

  Dear friends:

  My Acer laptop uses a system of operating system 64-bit Win7 ultimate. I can't use my system using the integrated slider. Please help bring a solution. I now use PS-external mouse instead. Thank you.

  Nothing to do with the victory, visit the Acer support and try to reinstall the drivers for the touchpad

• B2B - BAM integration does not work with the Oracle XE database

  Hello
  
  Can someone explain the reasons in detail, 'the B2B - BAM integration does not work with the database Oracle XE'?
  
  Can't we use XE POC simple to demonstrate BAM?
  
  Published by: 975946 on December 27, 2012 04:14

  Hi Nithin,

  The main reason for this Oracle XE database can't handle such a huge process. Same Oracle XE is not supported in production.
  Note that SOA requires 300 process and BAM more than 100 processes (400 total), which is in addition to any other requirement its 500 to parameter.but process during the installation of Oracle SOA RCU, I hope you gave 300 single right.so his can't handle as much load if use B2B BAM integration.

  The ultimate goal is to have need to display active data in the right BAM reports? so, if you are using Oracle XE DB its may be not possible to show the active data.that the reason Oracle recommended use / works with Oracle 10 g Oracle 11 g versions EE and EE.

  Best regards
  Siva San.

• Safari browser unlocking tabs

  I'm very frustrated with El Crapitan. Whenever I have an open safari and three tabs open, if I hit one, he will be himself unlock from the browser and make it a separate window.  I can't add it to the original browser that was opened. Often, if I just hit it by accident once, it will create a new window. How to prevent this, because it didn't happen with the previous OS (which is FAR superior to El crapitan on my macbook air.)

  This feature of El Capitan is a feature to save time, once you get used to it; It occurs when you have two or more tabs open, then use tab while dragging. Since it is an integral part of the operating system, the best solution is to avoid slipping while on the mode tab.

  You're not the only one to find this irritating feature:

  http://DARINGFIREBALL.NET/2008/04/safari_tab_dragging_modes

• Why do I get Office updates?

  Why do I get updated Microsoft Office when I have no office or work installed, they is an integral part of Windows 7?
  My next question is can I stop all these updates from the Office to settle?

  Hello

  You can click with the right button on those for office and works and HIDE - Control Panel - Windows Updates.
  Updates available.

  Then run this:

  1. run the cleanup tool to see if remains of Office, Works or PowerPoint are there.

  Spotlight utility Windows Installer CleanUp Utility
  http://TechNet.Microsoft.com/en-us/magazine/2008.08.UtilitySpotlight.aspx

  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301

  2. run these to reset all:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• ODI Q.

  John-
  
  I try to install 10.1.3.5.0 ODI. I downloaded the required configuration of delivery as directed by your blog http://john-goodwin.blogspot.com/2008/09/odi-series-part-
  
  1 html & I ran the whole upward. I was going through your blog and it says to copy on the drivers for SQL server, Planning & Essbase. I need to download Oracle
  
  Data knowledge Integrator Module for Installation Essbase release delivery 9.3.1.1 files to get these drivers?
  
  Thanks in advance!

  Yes, you copy the wrong driver, you must also ODI point to use a JRE/JDK 1.6 because I think that the sql server driver will not work with the default JRE 1.4 which is used by default in ODI.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Look at app

  I just got a Apple Watch and wish to set up, but I have not the app shows on my phone. It is a 5 c and updated to the latest ios. Where can I download the soft watch?

  Hello

  It is not currently possible to delete the watch app, which is an integral part of the iOS.

  When you look for the icon manually, remember that you have moved to another screen home or moved to a folder (which may itself contain multiple pages of apps):

  

  To find the application, displaying the homescreen on your iPhone:

  • Sliding down on the center of the screen > in the search at the top of the screen box, type 'watch' > when the watch icon, it will show also (to the right of the icon of the application) the name of any file that it has been assigned to.
  • You can also tap on the icon for in the search results to open the application:

  

• Change graphics on macbook pro mid-2010

  Hello.

  I want to change my graphics card Intel HD Graphics 288 MB to another graphics card.

  If it is possible? Please help me. Thank you

  Sorry but no. There is no graphics card. The graphics card intel HD is integrated, part of the logic board intel chipset components and firmware.