ISE 1.1.4 and AD 2012 Windows

Similar Questions

• Help! Window 2008 server R2 and R2 2012 window server time synchronize the difference

  Hello Sir/Madam,

  Help! I have a pair of window Server 2008 R2 and a pair of window Server R2 2012, who are the synchronization of time to one destination.

  After that time synchronization is successful, the window Server 2008 R2 clocks are still 1 second faster than those in the 2012 window servers.

  Is there anyone who got the same problem as me?

  Thank you.

  Kind regards
  Samuel

  Please post your query to:

  https://social.technet.Microsoft.com/forums/

  Server issues are better addressed there.

• Unable to get R2 2012 Windows Installer

  I have configured the RAID and R2 2012 Windows Setup detects.

  However, when I select the drive, you receive the following error message:

  "We could not create a partition or create an existing one."

  BIOS version: 2.0.19

  Any ideas?

  I managed to solve this problem by disabling the internal SD card in the BIOS.

• Laboratory of vSAN in 0, 00 b ability (R2 2012 Windows vCenter) Workstation

  Hello

  I'll put up a Beta RC 6 environment vSphere in Workstation 10.0.4 and want to activate VSAN.

  The configuration steps correctly to my knowledge--> only the problem is there is exactly 0, 00 b vSAN capacity available.

  My setup;

  * OCZ Revodrive 500GB SSD

  * 10.0.4 Workstation / Windows 8.1

  * vSphere 6.0 RC with 3 knots of ESXi and vCenter based windows

  * Machines virtual ESXi have 3 vDisks, 1 for ESXi and two additional VSAN.

  * extra vDisk 1 = 10 GB for the emulation of SSD (10 SSD passtrough workstation does not work out-of-the-box with the Revodrive).

  * extra vDisk 2 = 100 GB of data vSAN.

  * Detection of SSD is emulated by the parameter "SCSIx.y.virtualSSD = true".

  * vmk is active vSAN

  * cluster = vSAN licensed

  

  I also do not operate on 5.5. U2.

  Please notify

  Hello

  I actually found the guilty myself; There is a known bug with 10 (10.0.4) Workstation and R2 2012 Windows networking, I was using as a vCenter server.

  Networking has been very bug, sometimes there was a connectivity and sometimes it was not.

  See the networking of VMware Workstation 10 bug/question/problem

  (workaround e1000e failed also in 10.0.4, because he was already using this parameter for the network card)

  When you use VCSA, worked vSAN configuration

• An error occurred while the suspension the 2012 Windows R2 VMS on ESX 5.1 update 1 and ESXi5.0 Udpate3. Can someone help me what is the reason for that and how to fix this?

  An error occurred while the suspension the 2012 Windows R2 VMS on ESX 5.1 update 1 and ESXi5.0 Udpate3. Can someone help me what is the reason for that and how to fix this?

  This issue has been resolved with the article below

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2015181

• What version of esxi supports Windows 8 and Server 2012

  We have ESXi 5.0 and vSphere 5.0.

  I want to make the smallest upgrade for our VMware supports Windows 8 and Server 2012.

  What upgrade do I do?

  According to the matrix of product interoperability VMwarevCenter Server 5.0 (without update) supports ESXi 5.0 Update 1 guests too.

  André

• Fact R2 support Windows standard server 2012 (Windows server 2012 ROK Standard 2CPU/VM) license?

  Original title: licenses

  Hello

  I installed Windows server 2012 standard R2 and for Windows server 2012 ROK Standard license 2CPU/VM.

  Windows has not activated this license.

  Fact R2 support Windows standard server 2012 (Windows server 2012 ROK Standard 2CPU/VM) license?

  Thanks in advance!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• renovated, install XP SP2, valid and cannot access windows update

  Hello world

  I reformated my desktop PC, install XP SP2 original frommy OEM drive, valid and cannot access windows update.

  All solutions?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cant-download-SP3-getting-error-0x8024400a/a71b55ee-10d4-410C-8b0b-a2114f7d8b94

  UTC/GMT is 20:23 on Sunday, October 28, 2012

• PERC S300 and R2 2012

  Hi, I saw some documents last year which says that Dell does not intend to create a driver for use with the Perc S300 and R2 for Windows Server 2012. This situation is even position? If Yes, what is the best option for my brand new PowerEdge R210 II? I would rather use hardware RAID than software RAID on what happens to be a domain controller. The server has two installation disks in a RAID 1 array. Any help, suggestions and advice are welcome. Thank you!

  Dell_S100-S110-S300_Driver-WindowsServer2012r2

• Reattach the EqualLogic iSCSI for 2012 Windows volumes

  Hello

  We use EqualLogic, Windows 2008R2, HIT and initiator iSCSI access volumes. Now I'm re - install OS to Windows 2012. All materials, IP addresses, volumes, host name will be the same on the new operating system. BONES of some changes. Will it be the right way to remap the iSCSI volumes to the new operating system:

  1. on windows 2008 R2 take the volume offline in the disk management console.
  2. disconnect "Discovered targets" in the Windows iSCSI initiator.
  3 collect volumes offline in Manager Dell EqualLogic Group (to restore the connections).
  4. the new 2012 Windows Installer 4.5 HIT and set (is this version of the correct software for Windows 2012?)
  5 activate the volumes in the Dell EqualLogic Group Manager.
  6. Discovery target and connect to targets.
  7 collect volumes online in the OS disk management console.

  These steps are correct?
  Are they all necessary?
  Is a correct software 4.5 for windows 2012 HIT?

  Thank you

  Re: connections.  Are you referring to the iSCSI to table sessions?   If so, those are dynamic.  When you stop they will disappear.

  If everything is the same, so technically Yes.  Shutdown, you can reload and bring it to the top.

• Problem with OpenManage on a T300 with R2 2012 Windows

  When I install OpenManage on a PowerEdge T300 with R2 2012 Windows and it is originally a 'limited' warning of network connectivity and connection to the gateway is lost. I have to run a network card 'repair' every time that the alert go away and the restored network connection. Even after a reboot, I still have to run the repair. When I uninstall OMSA network card works fine. I tried OMSA version 7.3, 7.4, 7.4.0.2, 8.1. The matrix of compatibility on the Dell site seems to show that it should be compatible with 8.1 and 7.4 (on a T300 with 2012 R2). Our network card is a Broadcom NetXtreme Gigabit (version 17.0.0.3 driver). Everyone knows about this problem? I come to a legacy version, although compatibility documentation does not appear 2012 R2 as as operating system supported?

  Tstout21,

  The problem you are having sounds like an updated version of firmware on the network card. I suggest you uninstall OMSA, then restart and update the network map. Although the update of the firmware should fix, I suggest that we update the driver as well up-to-date. You can not the driver and firmware here. After completing the updates, restart and go forward then reinstall OMSA.

  Let me know how it goes.

• DELL PowerEdge T710 support for 2012 Windows

  Hello

  I was reading this document on the support Windows 2012:

  http://en.community.Dell.com/TechCenter/OS-applications/w/wiki/4149.Dell-PowerEdge-server-support-for-Windows-Server-2012-and-its-features.aspx

  If I understand correctly T710 is supported for the installation of Windows 2012 as:

  Support Dell - qualified.

  And 'X' means that the long-term 2012 Windows: error memory consumed, Collaborative processor performance counters, logic processor idling, compatible device name are not supported on this server. Only SR-IOV future is supported?

  Thank you

  That is right.  Consumed memory error, the processor performance counters Collaborative, idling logical processor and compatible device Naming are only available on generation servers 12.   Server 2012 will take place on the T710.

  Kind regards

• The Dell R710 server upgrade to R2 2012 Windows

  Question for the forum:

  I have a Dell R710 server.  There a PERC 6 / i RAID card in there.  There are discs 5 x 2 TB on the PERC 6 / I configured in RAID-5 right now with the 6th disc as a 480 GB SSD.   I currently own WINDOWS 2012 R2 installed.   Windows 2012 sees the TB 5 x 2 as a 7.27 TB HDD and the 480 GB SSD as a second hard drive.

  I heard the Windows 2012 R2 storage solution is best.  I want to convert the TB 5 x 2 hard drives just so R2 2012 Windows can control it.  I have the following questions:

  1. What do I have to go in PERC 6 / I controller and remove the RAID 5 and create a virtual disk for each 2 TB as a RAID-0 disk drive so that Windows can see each as separate hard drive?

  2. each of the 2 TB is a SATA II drive.  PERC 6 / I can only support up to 2 TB to 3 Gbps.  What is the best way to do it?  Can I upgrade to SATA III drives or 6 Gbps?  This server which will support at all?  I have

  3. If I install a SATA III controller in the PCIe slot, how can I plug SATA III drives to the card.  All drives are connected to the server to forward now.

  4 If a disk fails, Dell R710 will still flash light orange on the forehead to show what defective hard drives?  People still hot to swap the drive?

  5. Windows 2012 R2 will be able to tell what defective hard drives?  With 5 x 2 to for the storage and 480 GB put in place in the SSD for tiered storage, which is the best way to configure it for performance?  Simple volume or mirror?  How many drives can fail until Windows cannot recover from the failure?

  Please advise on the best way to convert more software raid WINDOWS 2012 R2.  Thanks for the help in advance!

  1. This is the only way to make available to Windows as separate disks, as the PERC 6 does not support the RAID/JBOD.

  2. the PERC 6 supports a maximum drive size of 2 TB. The material is limited to 3 Gbps. You can use 6 GB/s drives, but they will operate as discs 3 Gbps.

  3. you will need to connect a cable from the backplane to the new controller, instead of the 6 PERC. Backplane may not support 6 GB/s speed, if you plug a controller 6Gbps 6Gbps drives and they bind upward to 3 Gbps, that is why.

  4. Yes.

  5. Yes. How can fail depends on how you have set it up and how much data is there.

• I bought and downloaded online Windows 8 and received the product key. How can I now purchase the installation CD?

  I bought and downloaded online Windows 8 and received the product key. How can I now purchase the installation CD?

  Go to the order summary page, you can find your product key:

  https://www.mswos.com/

  You can buy the DVD there.

  Or

  Create your own:

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  then:

  http://techingiteasy.WordPress.com/2012/11/07/part-2-How-to-upgrade-using-the-Windows-8-Upgrade-Assistant/

• Great migrations: move from vCenter 5.1 on Windows 2008R2/SQL 2008 5.1 or 5.5 on 2012 2012 Windows/SQL

  In anticipation of the end of mainstream support for Windows Server 2008 R2, I want to migrate an installation vCenter to a whole new server and MS SQL Server.

  It is a virtual machine running in my host cluster. There Server vCenter Update Manager, Converter Standalone and some services not VMware that I can handle it myself. ADAM is installed as part of the vCenter Server requirements, and it is also attached to an AD domain where I use AD, single sign - on.

  The host cluster is four 5.1 ESXi hosts that are up to date, and helped HA and DRS. They use also switches distributed to all of their network connectivity, including vMotion, management, fault tolerance (although I do not use FT) and virtual machines.

  I did upgrades on-site to vCenter before and I replaced SQL Express with SQL Standard on the same server, but I did not move before vCenter. I'd make some drastic measures, as I understand:

  * Complete backups (of course) of SQL in the server itself, ADAM

  Installation of a new server operating system and SQL 2012

  Withdrawal of databases and reinstall them on the new server

  * Restoration of ADAM on the new server

  Installation vCenter, Update Manager, etc.

  * Hoping the host cluster is mounted on the new server, and nothing breaks

  I'm not all that worried about maintaining statistics, so maybe it is possible to install a new server vCenter Server and simply move the host cluster from the old server to the new. I moved one vCenter to another host, but that was before I put in place of distributed switching.
  --

  I found this on a related post:

  Migration in a new vCenter VMware environment. IT diversifies

  This manual seems to echo what I've read so far, I had to disassemble the distributed switches until I can migrate any host to a new server vCenter. Yuck. Well, I've migrated from the standard to the switches distributed without downtime before, so I can do the opposite.

  --