ISE 1.2 notifications

Similar Questions

• ISE comments print Notification Portal

  Hello

  with the old comments of NAC server, I was able to 'draw' the impression of notification of comments with HTML elements. With ISE I can only write plain text. Does anyone know how to change things like the size of the font for printed documents?

  Kind regards

  Andreas

  Unfortunately, it is not natively supported with ISE 1.2.  However, the notification of comments will be customizable using HTML in point 1.3 of the ISE.  This version will be released if all goes well during the last week of November.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• ISE and AD Password expiry Notification and allow the user to change

  We are almost ready to chat live with ISE for our VPN users.

  One last thing that has been requested is, how can we ISE prompt a user when their AD password is about to expire and give them the opportunity to change it at this time here?

  I know that the ASA has the ability, if it performs authentication directly against the AD, but that the feature goes away with the IPN. So what settings are there to encourage users who connect via Anyconnect to the ASA VPN by ISE?

  We don't have any ISE Setup for internal/system users and yet, it's strictly a VPN configuration only for now.

  Thank you

  Dirk

  Yes, that's what I said in the first post.

  Since then, we use Protocol radius for password expiry notification will not occur.

  You will get a pop-up window that password is expired, please change.

  Jatin kone
  -Does the rate of useful messages-

• Notification by Email of ISE comments (creating a guest account)

  When a guest user creates an account in ISE, it sends an email from system generated with the name of user and password. It says "Welcome to the portal of comments, your LSE username and password yyy xxx." Is there anywhere in ISE (1.2) to change this text, in particular the name of "portal comments? I thought it was in the patterns of language > configure various elements > name of portal. But I've changed that in the name of the portal, and it is not reflected in the email. Thank you.

  Josh,

  It is actually configured in the Sponsor portal settings.  Go in Administration > Web portal management > settings and double-click Sponsor in the left menu.  Open models of language and choose your language (I chose in English).  Scroll to Set up Email Notification and customize!

  

  Do not forget to save

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• ISE / IBNS 2.0 - open authentication

  Anyone travelling IBNS 2.0, or everyone stick w / the legacy "authentication" of orders that have been available as forever?

  We seek in IBNS 2.0 to take advantage of its critical ACL functionality that is not available in the type of inheritance auth - manager.

  When I made a conversion of an existing style, legacy to the new style 2.0 on a 3850 IBNS, I can't tell which line is the equivalent of the command "open authentication".
  Can someone please report it to me?

  How can we make "open authentication" in the new style IBNS 2.0?
  This is important for our phases of deployment of the MONITOR & LOW - IMPACT ISE.

  ===============

  New style:

  Subscriber control policy-map type POLICY_Gi1/0/21
  event started the match-all session
  10-class until the failure
  10 authenticate using dot1x attempts 2 time try again 0 priority 10
  first game event-one authentication failure
  DOT1X_FAILED - until the failure of class 5
  10. put end dot1x
  20 authenticate using mab priority 20
  class 10 AAA_SVR_DOWN_UNAUTHD_HOST - until the failure
  10 activate service-model CRITICAL_AUTH_VLAN_Gi1/0/21
  20 activate service-model DEFAULT_CRITICAL_VOICE_TEMPLATE
  25 turn CRITICISM-ACCESS service models
  30 allow
  reauthentication 40 break
  class 20 AAA_SVR_DOWN_AUTHD_HOST - until the failure
  break 10 reauthentication
  20 allow
  DOT1X_NO_RESP - until the failure of class 30
  10. put end dot1x
  20 authenticate using mab priority 20
  class 40 MAB_FAILED - until the failure
  10 complete mab
  20 40 authentication restart
  class 60 still - until the failure
  10. put end dot1x
  20 terminate mab
  authentication-restart 30 40
  event agent found match-all
  10-class until the failure
  10 complete mab
  20 authenticate using dot1x attempts 2 time try again 0 priority 10
  AAA-available game - all of the event
  class 10 IN_CRITICAL_AUTH - until the failure
  clear-session 10
  class 20 NOT_IN_CRITICAL_AUTH - until the failure
  10 take a reauthentication
  match-all successful authentication event
  10-class until the failure
  10 activate service-model DEFAULT_LINKSEC_POLICY_SHOULD_SECURE
  violation of correspondence event
  10-class until the failure
  10 restrict

  ================

  The old:

  interface GigabitEthernet1/0/21
  TEST-ISE description
  IP access-group ACL by DEFAULT in
  authentication event fail following action method
  action of death event authentication server allow vlan 1
  action of death event authentication server allow voice
  the host-mode multi-auth authentication
   open authentication
  authentication order dot1x mab
  authentication priority dot1x mab
  Auto control of the port of authentication
  authentication timer restart 40
  restrict the authentication violation
  MAB
  added mac-SNMP trap notification change
  deleted mac-SNMP trap notification change
  dot1x EAP authenticator
  dot1x tx-time 10

  It seems that "open authentication" is now default and as such are not not in the new configuration of style.

  Access-session closed Example: Device(config-if)# access-session closed

  Prevents access preauthentication on this port. The port is set to open access by default.

  http://www.Cisco.com/en/us/docs/iOS-XML/iOS/San/configuration/XE-3SE/3850/San-Cntrl-pol.html

• ISE with WLC AND switches

  Hello

  We run 3xWLC controller with 800 AP using ISE 1.2 for authentication wireless 802. 1 x. I was looking in the config of the ISE and notice of 400 edge cheating only 2x2960s are configured with 802. 1 x (ISE RADIUS config) and SNMP and only 2 of the port is 2 ap tie with swtich remaining ports.and the 3XWLC in network devices.

  I do not understand how an access point is to do this work (802.1 x) because it is location on different site and people are connecting to various different locations. ISE almost run/do 11 876 profiled ends.

  version 12.2
  !
  boot-start-marker
  boot-end-marker
  !
  enable secret 5 $1$ fokm$ lesIWAaceFFs.SpNdJi7t.
  !
  Test-RADIUS username password 7 07233544471A1C5445415F
  AAA new-model
  Group AAA dot1x default authentication RADIUS
  Group AAA authorization network default RADIUS
  Group AAA authorization auth-proxy default RADIUS
  start-stop radius group AAA accounting dot1x default
  start-stop radius group AAA accounting system by default
  !
  !
  !
  !
  AAA server RADIUS Dynamics-author
  Client 10.178.5.152 server-key 7 151E1F040D392E
  Client 10.178.5.153 server-key 7 060A1B29455D0C
  !
  AAA - the id of the joint session
  switch 1 supply ws-c2960s-48 i/s-l
  cooldown critical authentication 1000
  !
  !
  IP dhcp snooping vlan 29,320,401
  no ip dhcp snooping option information
  IP dhcp snooping
  no ip domain-lookup
  analysis of IP device
  !
  logging of the EMP
  !
  Crypto pki trustpoint TP-self-signed-364377856
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 364377856
  revocation checking no
  rsakeypair TP-self-signed-364377856
  !
  !
  TP-self-signed-364377856 crypto pki certificate chain
  certificate self-signed 01
  30820247 308201B 0 A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
  2 060355 04031325 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 30312E30
  69666963 33363433 37373835 36301E17 393330 33303130 30303331 0D 6174652D
  305A170D 2E302C06 1325494F 03550403 32303031 30313030 30303030 5A 303031
  532D 5365 6C662D53 69676E65 642D 4365 72746966 69636174 652 3336 34333737
  06092A 86 4886F70D 01010105 38353630 819F300D 00308189 02818100 0003818D
  B09F8205 9DD44616 858B1F49 A27F94E4 9E9C3504 F56E18EB 6D1A1309 15C20A3D
  31FCE168 5A8C610B 7F77E7FC D9AD3856 E4BABDD1 DFB28F54 6C24229D 97756ED4
  975E2222 939CF878 48D7F894 618279CF 2F9C4AD5 4008AFBB 19733DDB 92BDF73E
  B43E0071 C7DC51C6 B9A43C6A FF035C63 B53E26E2 C0522D40 3F850F0B 734DADED
  02030100 01A 37130 03551 D 13 6F300F06 0101FF04 05300301 01FF301C 0603551D
  11041530 13821150 5F494D2B 545F5374 61636B5F 322D312E 301F0603 551D 2304
  18301680 1456F3D9 23759254 57BA0966 7C6C3A71 FFF07CE0 A2301D06 03551D0E
  04160414 56F3D923 75925457 BA09667C 6C3A71FF F07CE0A2 2A 864886 300 D 0609
  F70D0101 5B1CA52E B38AC231 E45F3AF6 12764661 04050003 81810062 819657B 5
  F08D258E EAA2762F F90FBB7F F6E3AA8C 3EE98DB0 842E82E2 F88E60E0 80C1CF27
  DE9D9AC7 04649AEA 51C49BD7 7BCE9C5A 67093FB5 09495971 926542 4 5A7C7022
  8D9A8C2B 794D99B2 3B92B936 526216E0 79 D 80425 12B 33847 30F9A3F6 9CAC4D3C
  7C96AA15 CC4CC1C0 5FAD3B
  quit smoking
  control-dot1x system-auth
  dot1x critical eapol
  !
  pvst spanning-tree mode
  spanning tree extend id-system
  No vlan spanning tree 294-312,314-319,321-335,337-345,400,480,484-493,499,950
  !
  !
  !
  errdisable recovery cause Uni-directional
  errdisable recovery cause bpduguard
  errdisable recovery cause of security breach
  errdisable recovery cause channel-misconfig (STP)
  errdisable recovery cause pagp-flap
  errdisable recovery cause dtp-flap
  errdisable recovery cause link-flap
  errdisable recovery cause FPS-config-incompatibility
  errdisable recovery cause gbic-invalid
  errdisable recovery cause psecure-violation
  errdisable cause of port-mode-failure recovery
  errdisable recovery cause dhcp-rate-limit
  errdisable recovery cause pppoe-AI-rate-limit
  errdisable recovery cause mac-limit
  errdisable recovery cause vmps
  errdisable recovery cause storm-control
  errdisable recovery cause inline-power
  errdisable recovery cause arp-inspection
  errdisable recovery cause loopback
  errdisable recovery cause small-frame
  errdisable recovery cause psp
  !
  internal allocation policy of VLAN ascendant
  !
  !
  interface GigabitEthernet1/0/10
  switchport access vlan 320
  switchport mode access
  IP access-group ACL-LEAVE in
  authentication event fail following action method
  action of death server to authenticate the event permit
  living action of the server reset the authentication event
  multi-domain of host-mode authentication
  open authentication
  authentication order dot1x mab
  authentication priority dot1x mab
  Auto control of the port of authentication
  periodic authentication
  authentication violation replace
  MAB
  dot1x EAP authenticator
  dot1x tx-time 10
  spanning tree portfast
  spanning tree enable bpduguard

  interface GigabitEthernet1/0/16
  switchport access vlan 320
  switchport mode access
  IP access-group ACL-LEAVE in
  authentication event fail following action method
  action of death server to authenticate the event permit
  living action of the server reset the authentication event
  multi-domain of host-mode authentication
  open authentication
  authentication order dot1x mab
  authentication priority dot1x mab
  Auto control of the port of authentication
  periodic authentication
  authentication violation replace
  MAB
  dot1x EAP authenticator
  dot1x tx-time 10
  spanning tree portfast
  spanning tree enable bpduguard
   
  interface GigabitEthernet1/0/24
  switchport access vlan 320
  switchport mode access
  IP access-group ACL-LEAVE in
  authentication event fail following action method
  action of death server to authenticate the event permit
  living action of the server reset the authentication event
  multi-domain of host-mode authentication
  open authentication
  authentication order dot1x mab
  authentication priority dot1x mab
  Auto control of the port of authentication
  periodic authentication
  authentication violation replace
  MAB
  dot1x EAP authenticator
  dot1x tx-time 10
  spanning tree portfast
  spanning tree enable bpduguard
   
  !
  interface GigabitEthernet1/0/33
  switchport access vlan 320
  switchport mode access
  IP access-group ACL-LEAVE in
  authentication event fail following action method
  action of death server to authenticate the event permit
  living action of the server reset the authentication event
  multi-domain of host-mode authentication
  open authentication
  authentication order dot1x mab
  authentication priority dot1x mab
  Auto control of the port of authentication
  periodic authentication
  authentication violation replace
  MAB
  dot1x EAP authenticator
  dot1x tx-time 10
  spanning tree portfast
  spanning tree enable bpduguard
   
  interface GigabitEthernet1/0/34
  switchport access vlan 320
  switchport mode access
  IP access-group ACL-LEAVE in
  authentication event fail following action method
  action of death server to authenticate the event permit
  living action of the server reset the authentication event
  multi-domain of host-mode authentication
  open authentication
  authentication order dot1x mab
  authentication priority dot1x mab
  Auto control of the port of authentication
  periodic authentication
  authentication violation replace
  MAB
  dot1x EAP authenticator
  dot1x tx-time 10
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface GigabitEthernet1/0/44
  switchport access vlan 320
  switchport mode access
  IP access-group ACL-LEAVE in
  authentication event fail following action method
  action of death server to authenticate the event permit
  living action of the server reset the authentication event
  multi-domain of host-mode authentication
  open authentication
  authentication order dot1x mab
  authentication priority dot1x mab
  Auto control of the port of authentication
  periodic authentication
  authentication violation replace
  MAB
  dot1x EAP authenticator
  dot1x tx-time 10
  spanning tree portfast
  spanning tree enable bpduguard

  !
  interface GigabitEthernet1/0/46
  switchport access vlan 320
  switchport mode access
  IP access-group ACL-LEAVE in
  authentication event fail following action method
  action of death server to authenticate the event permit
  living action of the server reset the authentication event
  multi-domain of host-mode authentication
  open authentication
  authentication order dot1x mab
  authentication priority dot1x mab
  Auto control of the port of authentication
  periodic authentication
  authentication violation replace
  MAB
  dot1x EAP authenticator
  dot1x tx-time 10
  spanning tree portfast
  spanning tree enable bpduguard

  interface GigabitEthernet1/0/48
  switchport access vlan 320
  switchport mode access
  IP access-group ACL-LEAVE in
  authentication event fail following action method
  action of death server to authenticate the event permit
  living action of the server reset the authentication event
  multi-domain of host-mode authentication
  open authentication
  authentication order dot1x mab
  authentication priority dot1x mab
  Auto control of the port of authentication
  periodic authentication
  authentication violation replace
  MAB
  dot1x EAP authenticator
  dot1x tx-time 10
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface GigabitEthernet1/0/49
  Description link GH
  switchport trunk allowed vlan 1,2,320,350,351,401
  switchport mode trunk
  MLS qos trust dscp
  IP dhcp snooping trust
  !

  interface GigabitEthernet1/0/52
  Description link CORE1
  switchport trunk allowed vlan 1,2,29,277,278,314,320,401
  switchport mode trunk
  MLS qos trust dscp
  IP dhcp snooping trust
  !
  !
  interface Vlan320
  IP 10.178.61.5 255.255.255.128
  no ip-cache cef route
  no ip route cache
  !
  default IP gateway - 10.178.61.1
  IP http server
  IP http secure server
  IP http secure-active-session-modules no
  active session modules IP http no
  !
  !
  Access IP extended ACL-AGENT-REDIRECT list
  deny udp any any domain eq bootps
  permit tcp any any eq www
  permit any any eq 443 tcp
  IP extended ACL-ALLOW access list
  allow an ip
  IP access-list extended by DEFAULT ACL
  allow udp any eq bootpc any eq bootps
  allow udp any any eq field
  allow icmp a whole
  allow any host 10.178.5.152 eq 8443 tcp
  permit tcp any host 10.178.5.152 eq 8905
  allow any host 10.178.5.152 eq 8905 udp
  permit tcp any host 10.178.5.152 eq 8906
  allow any host 10.178.5.152 eq 8906 udp
  allow any host 10.178.5.152 eq 8909 tcp
  allow any host 10.178.5.152 eq 8909 udp
  allow any host 10.178.5.153 eq 8443 tcp
  permit tcp any host 10.178.5.153 eq 8905
  allow any host 10.178.5.153 eq 8905 udp
  permit tcp any host 10.178.5.153 eq 8906
  allow any host 10.178.5.153 eq 8906 udp
  allow any host 10.178.5.153 eq 8909 tcp
  allow any host 10.178.5.153 eq 8909 udp
  refuse an entire ip
  Access IP extended ACL-WEBAUTH-REDIRECT list
  deny ip any host 10.178.5.152
  deny ip any host 10.178.5.153
  permit tcp any any eq www
  permit any any eq 443 tcp

  radius of the IP source-interface Vlan320
  exploitation forest esm config
  logging trap alerts
  logging Source ip id
  connection interface-source Vlan320
  record 192.168.6.31
  host 10.178.5.150 record transport udp port 20514
  host 10.178.5.151 record transport udp port 20514
  access-list 10 permit 10.178.5.117
  access-list 10 permit 10.178.61.100
  Server SNMP engineID local 800000090300000A8AF5F181
  SNMP - server RO W143L355 community
  w143l355 RW SNMP-server community
  SNMP-Server RO community lthpublic
  SNMP-Server RO community lthise
  Server SNMP trap-source Vlan320
  Server SNMP informed source-interface Vlan320
  Server enable SNMP traps snmp authentication linkdown, linkup cold start
  SNMP-Server enable traps cluster
  config SNMP-server enable traps
  entity of traps activate SNMP Server
  Server enable SNMP traps ipsla
  Server enable SNMP traps syslog
  Server enable SNMP traps vtp
  SNMP Server enable traps mac-notification change move threshold
  Server SNMP enable traps belonging to a vlan
  SNMP-server host 10.178.5.152 version 2 c lthise mac-notification
  SNMP-server host 10.178.5.153 version 2 c lthise mac-notification
  !
  RADIUS attribute 6 sur-pour-login-auth server
  Server RADIUS attribute 8 include-in-access-req
  RADIUS attribute 25-application access server include
  dead-criteria 5 tent 3 times RADIUS server
  test the server RADIUS host 10.178.5.152 auth-port 1812 acct-port 1813 username test-RADIUS 7 key 03084F030F1C24
  test the server RADIUS host 10.178.5.153 auth-port 1812 acct-port 1813 username test-RADIUS 7 key 141B060305172F
  RADIUS vsa server send accounting
  RADIUS vsa server send authentication

  any help would be really appreciated.

  I'm not sure that completely understand the question; But if LSE is only political wireless, then none of the wired switches need any configuration of ISE.

  Access points tunnel all wireless traffic to the WLC on CAPWAP (unless you use FlexConnect). This is the configuration 802. 1 x on the WLC that implements policies defined in ISE.

  Switches wired never need to act as an access network (n) device and so do not need to be defined in ISE unless or until you want to apply policies of ISE for wired devices...

• order of the authentication and authorization air ISE

  Hello

  I am looking to configure ISE to authenticate joined AD PC (Anyconnect NAM help for user authentication and the machine with the EAP chaining) and profile Cisco IP phones. The Pc and phones connect on the same switchport. The switchport configuration was:

  switchport
  switchport access vlan 102
  switchport mode access
  switchport voice vlan 101
  authentication event fail following action method
  multi-domain of host-mode authentication
  authentication order dot1x mab
  authentication priority dot1x mab
  Auto control of the port of authentication
  MAB
  added mac-SNMP trap notification change
  deleted mac-SNMP trap notification change
  dot1x EAP authenticator

  The configuration above worked well with authentication sessions 'show' of the switch showing dot1x as the method to the field of DATA and mab for VOICE. I decided to reverse the order of authentication/priority on the interface of the switch so that the phone would be authenticated first by mab. As a result, the authentication sessions 'show' of the switch showing mab as a method for both VOICE and DATA.

  To avoid this I created a permission policy on ISE to respond with an "Access-Reject" when the "UseCase = Lookup host" and the endpoint identity group was unknown (the group that contains the PC AD). This worked well worked - the switch would attempt to authenticate the PC and phone with mab. When an "Access-Reject" has been received for the PC, the switch would pass to the next method and the PC would be authenticated using dot1x.

  The only problem with this is that newspapers soon filled ISE with denys caused by the authorization policy - is possible to realize the scenario above without affecting the newspapers?

  Thank you
  Andy

  Hi Andy -.

  Have you tried to have the config in the following way:

   authentication order mab dot1x authentication priority dot1x mab

  This "order" will tell the switchport always start with mab , but the keyword 'priority' will allow the switchport to accept the authentications of dot1x to dot1x devices.

  For more information see this link:

  http://www.Cisco.com/c/en/us/products/collateral/iOS-NX-OS-software/identity-based-networking-service/application_note_c27-573287.html

  Thank you for evaluating useful messages!

• ISE MAC movement move and host of Cisco

  Hello

  I read that SNMPTraps should not be sent to ISE using probe RADIUS, because it will trigger only a SNMPQuery duplicate. If so, how do you support a use case by which a device can withdraw the authorization of a switch port and successfully allow on a different port. It is one of the following exclusion of others?

  1 authentication allowed mac-passage

  2. analysis of IP device

  3. change notification-mac address table, notification of mac address table mac-move, trap snmp-server (global configuration) and snmp trap mac-notification (configuration interface)

  I understand that for a device behind a non-cisco IP, CDP or LLDP logoff phone or Proxy EAPOL will inform the switch.

  Thank you

  move to the Mac permits is the solution.

• CIsco ISE - HP Openview monitoring.

  Hi guys,.

  I have a doubt about the ISE Cisco network services monitoring.
  We can send notifications of alarms has several emails, but my doubt is if I can watch ISE services with a network monitoring software such as HP Open View.
  I haven't found any documentation on this subject yet.
  Anyone know if I can do this?

  You can configure a syslog server, I'm not familiar with HP Open view but with other SIEM tools you must make sure that the server can accept multiline UDP as source syslog Protocol.

  Thank you

  Tarik Admani

• Post alarm ISE

  There is no way to send an email from ISE test for alarm notification. For more information, you can see the link below

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/1-2/user_guide/ise_use...

  There is no way to send an email from ISE test for alarm notification. For more information, you can see the link below

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/1-2/user_guide/ise_use...

• First successful authorization ISE and then failure (MAB)

  Hello

  ISE 1.1.1 and switch using 3650 12.2 (55) SE6.

  I have a client (computer) that needs to be authenticated with MAB and then to the port of the switch must be asigned a DACL and VLAN 90 list. I get

  'Authorization successful' but directly after it fails and I cannot understand why. ISE shows only the authentication successful under "Authenticaions Live".

  As you can se the rating below 802. 1 x fails, as it should be, and then pass the MAB, conditioned the VLAN and then fails:

  0002SWC002 (config) #int fa0/13

  0002SWC002(Config-if) #shut

  0002SWC002(Config-if) #.

  7 jan 13:26:59.640: % LINK-5-CHANGED: Interface FastEthernet0/13, changed state down administratively

  7 jan 13:27:00.647: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/13, changed state down

  0002SWC002(Config-if) #no close

  0002SWC002(Config-if) #.

  7 jan 13:27:19.689: % LINK-3-UPDOWN: Interface FastEthernet0/13, changed State to down

  7 jan 13:27:22.063: % LINK-3-UPDOWN: Interface FastEthernet0/13, changed State to

  7 jan 13:27:22.776: % AUTHMGR-5-START: start "dot1x' for the client (f04d.a223.8f43) on the Interface Fa0/13 AuditSessionID 0A0005FC00000

  020D7C192D1

  7 jan 13:27:23.070: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/13, changed State to

  7 jan 13:27:51.054: % DOT1X-5-FAIL: failure of authentication for the client (f04d.a223.8f43) on the Interface Fa0/13 AuditSessionID

  7 jan 13:27:51.054: % AUTHMGR-7-RESULT: authentication result in 'no response' of 'dot1x' for the customer (f04d.a223.8f43) on the Interface

  0/13 AuditSessionID 0A0005FC00000020D7C192D1

  7 jan 13:27:51.054: % AUTHMGR-7-FAILOVER: failover "dot1x' for the client (f04d.a223.8f43) on the Interface Fa0/13 AuditSessionID 0

  A0005FC00000020D7C192D1

  7 jan 13:27:51.054: % AUTHMGR-5-START: start "mab" for the client (f04d.a223.8f43) on the Interface Fa0/13 AuditSessionID 0A0005FC0000002

  0D7C192D1

  7 jan 13:27:51.088: % MAB-5-SUCCESS: authentication successful for the client (f04d.a223.8f43) on the Interface Fa0/13 AuditSessionID A 0, 0005

  FC00000020D7C192D1

  7 jan 13:27:51.088: % AUTHMGR-7-RESULT: result of the authentication 'success' of 'mab' for the client (f04d.a223.8f43) on the Interface Fa0/13 AuditSessionID 0A0005FC00000020D7C192D1

  7 jan 13:27:51.088: % AUTHMGR-5-VLANASSIGN: 90 VLAN assigned to the Interface Fa0/13 AuditSessionID 0A0005FC00000020D7C192D1

  7 jan 13:27:51.096: % EMP-6-POLICY_REQ: IP 0.0.0.0. MAC f04d.a223.8f43 | AuditSessionID 0A0005FC00000020D7C192D1 | AUTHTYPE DOT1X | EVENTS APPLY

  7 jan 13:27:51.096: % EMP-6-IPEVENT: IP 0.0.0.0. MAC f04d.a223.8f43 | AuditSessionID 0A0005FC00000020D7C192D1 | AUTHTYPE DOT1X | EVENT

  IP-WAIT

  7 jan 13:27:51.255: % AUTHMGR-5-SUCCESS: authorization succeeded for client (f04d.a223.8f43) on the Interface Fa0/13 AuditSessionID A 0, 00

  05FC00000020D7C192D1

  7 jan 13:27:52.027: % EMP-6-IPEVENT: IP 10.90.5.1 | MAC f04d.a223.8f43 | AuditSessionID 0A0005FC00000020D7C192D1 | AUTHTYPE DOT1X | ACE double entry of IP-ASSIGNMENTReplacing EVENT for the host 10.90.5.1

  7 jan 13:27:52.036: % AUTHMGR-5-FAIL: failed authorization for customer (f04d.a223.8f43) on the Interface Fa0/13 AuditSessionID 0A0005FC00

  000020D7C192D1

  7 jan 13:27:52.036: % EMP-6-POLICY_REQ: IP 10.90.5.1 | MAC f04d.a223.8f43 | AuditSessionID 0A0005FC00000020D7C192D1 | AUTHTYPE DOT1X | REMOVAL OF THE EVENT

  After that the process starts all over again.

  It is the switch port configuration:

  interface FastEthernet0/13

  Description data/VoIP

  switchport mode access

  switchport voice vlan 20

  switchport port-security

  security violation restrict port switchport

  IP access-group ACL-LEAVE in

  SRR-queue bandwidth share 1 70 25 5

  3 SRR-queue bandwidth shape 0 0 0

  priority queue

  authentication event fail following action method

  action of death event authentication server allow voice

  the host-mode multi-auth authentication

  open authentication

  authentication order dot1x mab

  authentication priority dot1x mab

  Auto control of the port of authentication

  MAB

  added mac-SNMP trap notification change

  no link-status of snmp trap

  dot1x EAP authenticator

  dot1x tx-time 10

  Storm-control broadcasts 2.00 1.00

  Storm-control level multicast 2.00 1.00

  stop storm-control action

  Storm-control action trap

  spanning tree portfast

  service-policy input ax-qos_butnet

  IP dhcp snooping limit 5 speed

  end

  Is there a problem with the client (computer) or ISE/switch?

  No problem of Phillip,

  Ultimately you want to leave the entries in the source for the dACL set with one, because the switch will replace those with the source ip address that he draws from the analysis of ip device.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Tickets comments ISE with a receipt printer

  Hello

  Anyone know if it is possible to use a receipt printer with reviews tickets via the portal of sponsor.

  I know you can use a normal printer, but the question is whether you can change the format or html string to adjust it to your printer.

  Through the documentation and the web without really find something useful.

  Best regards

  Tom

  Hello

  Interesting to do with a receipt printer. I never had such application. If it works let me know please.

  Your question, you can customize the print notification by playing with the html tag.

  Here's the documentation: http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise _...

  Check out customize print Notifications.. You should be able to adapt to the notification to fit on your receipt.

  Thank you

  PS: Please do not forget to rate and score as correct answer if this answered your question

• Get notifications on my watch for app removed

  For my iPhone 6 s and look, I used an application called team Stream by Bleacher report. I chose the preference "not not mirror iPhone" do not get notifications on my watch, but stay get them on the iPhone. However, notifications continue on my watch. I deleted the app on my watch to try to solve the problem but despite the app isn't only not on the watch more I get always constant notifications. Should I delete the app on my iPhone? Very frustrating.

  Hello

  The following steps may help:

  • Close the watch application, and then restart your iPhone and your watch:
    • To close the application shows on your iPhone, click twice on the Home button, and then drag upward on Watch app preview.
    • Close the two devices together, and then restart your iPhone first:
      • Restart your iPhone, iPad or iPod touch - Apple Support
      • Restart your Apple Watch - Apple Support
  • If the problem persists, then disable the twinning and re - pair your watch:
    • The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
    • Cancel the twinning of your iPhone - Apple and Apple Watch Support
    • Set up your Apple Watch - Apple Support

• Incoming text notification has stopped

  I have an iPhone 6 and Apple Watch and today the sound alert on both stopped working.  It is not in silent mode and I rechecked the settings for text notifications.

  Any thoughts?

  Hey achilds_IOS,

  Thank you for using communities of Apple Support. From your post, I see that your iPhone and Apple Watch are not audible alert you when you receive a text message. I can understand how it is important to hear notifications and want to help you get the most out of your device and all its features. The following information includes some options that can help to get it working again. If you haven't already done so, we will try to restart the iPhone 6 s and Apple Watch.

  You also said that nor peripheral are silent. We will also make sure that your device is not on do not disturb as well. The link below can show you how to turn off and check that do not disturb is not on a calendar.

  Use of do not disturb on your iPhone, iPad or iPod touch

  Let us know if this procedure works for you.

  See you soon

• iPhone 6s txt notifications does not when it is combined with watch

  I have a different ringtone for contacts important such as the pages of work or family and friends.  I get only the tapping of the watch on my wrist... the ringtone is not audible on my phone when it is associated with my Apple Watch.  is there a setting I'm missing here because I can't miss my work pages.  My Apple Watch setting is on my iphone for mirrored text messaging

  It is by design. When you watch unlocked (that is, you wear it) and the phone is in standby mode, all notifications will be directed to your watch instead of the phone survey. Custom notification sounds are not played on the watch.