Similar Questions

• I'm unable to install Adobe software licenses after the connection. It is said that it does not recognize my username after login.

  I'm unable to install Adobe software licenses after the connection. It is said that it does not recognize my username after login.

  Yes.  and?

• Nexus 5548 continuously restart after installing licenses for L3

  Here is the situation - we bought recently L3 (N55-D160L3-V2) daughter cards for our 5548UPs as well as Services in Enterprise LAN licenses)

  N55 - LAN1K9).

  I installed the card and Ent Svcs lic this weekend last and all is well except that I could not activate the feature of EIGRP... apparently, EIGRP requires basic LAN (N55-BAS1K9-BUN) license even if you have the lic Enterprise installed, so I was able to dig up from this license afterwards (which comes with the L3 daughter card (, by the way). Another side effect do not install the Base of Lan lic, is the L3/card module will be in an "offline" status until the Lan Base license is installed. Whatever it is, everything worked normally in L2 mode at the moment.

  So here, I thought, I was ready to proceed with the activation of L3 - this morning, I installed the basic LAN license on one of the 5548 s who apparently triggered the daughter card module L3 get active and triggered a reboot of the switch. OK, not that big of knew a business, that was probably to come. I expect the switch to return to the top normally... NOPE. The switch is entered in a continuous reboot cycle where the console prompt appears, and then 30 seconds later, could restart again.

  Finally I ended up reinstalling the original map of L2 and the right switch came. I see that the basis of LAN and Enterprise LAN are both still installed as well.

  What have I done wrong here?  Why the switch changed in a continuous reboot cycle once I installed the basic LAN license?

  Thanks in advance!

  Here are more details:

  Software

  BIOS: version 3.5.0

  Charger: version N/A

  Kickstart: version 5.0 (3) N1 (1 c)

  system: version 5.0 (3) N1 (1 c)

  power-seq: Module 1: version v1.0

  uC: version v1.2.0.1

  SFP UC: Module 1: v1.0.0.0

  Compile of the BIOS time: 03/02/2011

  kickstart image file is: bootflash:/n5000-uk9-kickstart.5.0.3.N1.1c.bin

  Kickstart compile time: 04/05/2011 03:00 [04/05/2011 06:43:31]

  filesystem image is: bootflash:/n5000-uk9.5.0.3.N1.1c.bin

  compile time: 04/05/2011 03:00 [04/05/2011 08:35:20]

  !

  !

  Feature Ins Lic status Date comments

  County

  --------------------------------------------------------------------------------

  No. FM_SERVER_PKG - unused-

  No. ENTERPRISE_PKG - unused-

  No. FC_FEATURES_PKG - unused-

  LAN_BASE_SERVICES_PKG Yes - use never-

  LAN_ENTERPRISE_SERVICES_PKG Yes - never used -.

  --------------------------------------------------------------------------------

  !

  !

  Status of Module Type mod Ports model

  --- -----  -------------------------------- ---------------------- ------------

  32 1 O2 32X10GE/modular universal Pla N5K - C5548UP - active SUP *.

  3 0 ok O2 no L3 daughter card N55 - DL2<--- ***="" had="" to="" reinstall="" the="" original="" l2="" card="" in="" order="" to="" get="" switch="" to="" boot="">

  MOD Sw Hw World-Wide-name (s) (WWN)

  ---  --------------  ------  --------------------------------------------------

  1 5.0 (3) N1 (1 c) 1.0.

  3 5.0 (3) N1 (1 c) 1.0.

  I had a console cable connected while the reboots were happening though and I saw a bunch of ominous messages, which likely would shed light on the problem

  I would be very interested to see this.

  Mainly, I need to know if there is something I am missing here - does our IOS (version 5.0(3)N1(1c)) not work with our L3 daughter card (N55-D160L3-V2)?

  Hmmm... good point.  You can try 5.1 (3) N2(1a) or 5.2 (1) N1 (1).

• After installing CC and trying to open the CC Isee the framework and a revolving around the circuit for hours.

  After installing and starting I see that the framework with a rotating Tower circuit for hours. No points for applications or any other sign.

  What I've done wrong?

  best regards from Ferdinand

  Hi ferdinand,.

  Please see the below help document to solve the problem:

  Does not open App | Wheels of progress turn continuously

  Kind regards

  Sheena

• Satellite U300-14Z - no sound after installing WIn7

  Hello!
  I have the problem (series Satellite PSU30E) next: laptop computer was Windows XP, who suddenly "fallen" and again once it has not issued (as explained by problem SATA drivers). I installed Windows 7 64 bit, but after installing it turned out that the * Device Manager has no audio device *. I reinstalled the system, is now a Windows7 Ultimate x 86 license.

  All options work, but the sound did not always appear. Installing the drivers doesn't help - * OS still does not see a sound card *. What could be the tools to solve the problem?

  Hi whooz,.

  Is that what you have already installed the audio driver from Toshiba Web site? As far as I know Satellite U300 supports Windows 7 32 bit then an audio driver should be listed and works because readers are pre-tested by Toshiba.

  But it is also important that you install the chipset driver and should be installed first. So start with installing the audio driver.

  Also, try to load the default settings in the BIOS.

• Error: "Windows Media Center has stopped working. Windows is checking for a solution. "when tried to open it after installing the KB983590 update

  Original title: WMC no longer works after update of August 10

  Windows Media Center has stopped working after installation of my Windows 7 Professional pc all 11 updates gave me on August 11, 2010. I used system restore to the day before the updates, and install them individually. The first 9 no trouble with WMC. But the IE8 KB982664 for Windows 7 compatibility view list caused my action center to report that I needed to check the undeclared solutions to problems. WMC would still start. But after installing KB983590 .NET framework 3.5.1 for Windows 7 x 86, WMC has stopped working.

  After you uninstall update 2 above WMC would still not start.

  After using the system again restore forward updates, I installed the other 9 updated with, so far, no problem with WMC.

  New installation of Windows 7 Pro.

  V.1.0.1963.0 MSE completely up to date. [have not installed the latest beta version due to this problem]

  Former pilot Mig15. Now using Windows 7 Professional and Project Professional 2010 Beta.

  Hi Davy-D,

  Step 1: Perform the upgrade on the spot
  a. close all applications, insert the DVD into the DVD drive of the computer.
  b. in the settings window, click install now.
  c. click go online to get the latest updates for installation (recommended).
  d. type the CD key if you are prompted to do so.
  e. click Yes to accept the Microsoft software license agreement.
  f. on the type of installation do you want? screen, click upgrade.
  g. when the installation is complete, restart your computer and check the difference.

  See Method 2 of this article: http://support.microsoft.com/kb/958044/en-us

  Very Important: Run a repair installation will not damage files and applications that are currently installed on your computer. However we recommend that you back up data, performing the steps incorrectly can delete data.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD problem after installing Win XP Service Pack 2

  After installing XP Service pack2 son of college clicked on a question about activation of WinDVD 5 for Toshiba and now my DVD does not load the program. How can I fix it, remimbering I need help step by step?

  WinDVD is the least of your problems: WinXP SP2 should be installed no later than October 10 2006!

  If the computer running Windows XP Gold or SP1 until earlier, may not be a critical functional application of antiviruse protection installed and 3 + years of security updates have not been installed.

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 [1] needs to be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ================
  [1] extended for WinXP SP2 support ends July 10, 2010. After this date, the computers running under that WinXP SP2 will NOT be offered for additional updates of critical security, automatic updates do not work, and site Web Windows Update won't be available until SP3 is installed.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 0X0000007E Stop after installing the new card mother and CPU.

  Original title: Stop error after installing the new card mother and CPU.

  After I installed a new motherboard and CPU I got a stop error 0X0000007E (0XC0000005, 0XB77EA756, 0XB84C742C, 0xB84C7128) and it restarted immediately. It always starts in safe mode, but I can't understand what is wrong. The old processor is a pentium 4 3 ghz, not sure what the motherboard was, new processor is AMD Athlon 64 X 2 Dual core 4200 + and I only know that the motherboard is an ASUS socket AM2. Device Manager does not recognize the CPU correctly, it shows just two entries called processor. As far as I can tell, it's almost certainly a driver issue, but I don't know how to diagnose or fix this. I am running windows XP home, I removed my video card, running 2 hard drives at 120 g (M) and 200 g (S), a DVD drive (M) and a reader of CD (S), and a stick of RAM to 1 GB.

  If you have made the change without having to reinstall XP, you will be taking and Pray H@ll. the best thing to do would be to reinstall XP and make sure you have the drivers available for your motherboard available so that you can update the installed chipset. In addition, be aware that if you have an OEM of Windows version, the license is dead when you changed the mother/CPU card.

  I hope this helps.

• I am running XP and now I can't re - install after installing Windows8, I I get messsage that floppy drive could not be found, but I don't have a floppy drive.

  I want my XP back

  I am running XP and now I can't re - install after installing Windows8, I get I messsage that floppy drive could not be found, but I don't have a floppy and player despite the choice of boot from my cd rom and by disabling the floppy drive the same message at startup When I scan for my cd rom he sees them, but say that they do not function correctly, any ideas what is happening? They were fine before, my BIOS did not change to recognize my cd rom?

  Reinstall Windows XP
  http://michaelstevenstech.com/cleanxpinstall.html

  Insert your Windows XP CD, and then restart your computer.

  When you are prompted to boot from the CD, do so. To do this, press any key on the keyboard.

  Windows XP will go into its configuration process.

  Once you arrive at the welcome configuration, press enter on your keyboard to start the installation process

  Press F8 on your keyboard to accept the license agreement

  Select the partition, and then press D on your keyboard to remove it

  Select Format the partition using the NTFS file system

  Press F on your keyboard to start the formatting.

  Installation files will now be copied to your hard drive

  Your system will be rebooted, the installation of Windows XP will continue

• VMWare Cisco ISE license

  I have a client with a Production ISE implementation which is fully licensed with the hardware appliances.

  They would like to add a single appliance VMWare as a node of additional political Services.

  Where in the course of the implementation of this node of VMware add the VM in ISE license?  The system already as the licenses for basic and advanced.

  Is this a type of honor based license given that the system is already allowed for the number of endpoints that require auxiliary?

  Mike Griego

  Virtual machine 'licence' is a license to honor based, it is never installed anywhere. Licenses like Basic, plus and apex are shared from node primary admin.

• I don't see the desktop icons after installing Windows updates.

  Original title: connection user init failure

  I m using windows 7 pro. After installing the updates, I have problem with the icon on the desktop .i has no icon on the desktop when you connect. get the message the CONNECTION USER INIT FAILED. After pressing ALT + CTRL + delete > taskmanager > run > Desktop Explorer icons is displayed... .i tried many time to solve this problem of the customer service, but they are unable to solve this problem. Please please help

  It is not possible for me to every time the format of the system

  kindly, please give solution.

  My system is connected to the network with 3 PCs and all are licensed copy.

  Hello

  Welcome to the Forums Community Microsoft and thanks for posting the question.

  According to the description, you get an error message "FAILED CONNECTION USER INIT" after installing Windows updates.

  From my research, this problem occurs if the Userinit key in the Windows registry has been changed. For example, this problem may occur if the Userinit key has a value, but no binary data.

  I suggest you follow the steps mentioned below.

  Method 1:

  Step 1: Start the computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Check the value and binary Userinit registry data

  Important: The following instructions contain the steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  a. start Registry Editor. To do this, click Start, type regedit in the search box and press ENTER.

  b. click continue.

  c. Locate and then click the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  d. in the right pane, right-click Userinit, and then click change.

  e. in the value data box, type hard disk:\Windows\System32\userinit.exe, and then click OK.

  Note: The placeholder of the hard drive refers to the drive on which Windows Vista is installed.

  f. close the registry editor.

  g. restart the computer.

  Method 2:

  Restore the system to an earlier point before installing this application.

  
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.
  
  More information on:
  
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information helps. Get back to us if you have more queries about Windows.

• ISE license consumption and freeing licenses [RADIUS]

  Hi people EHT,.

  There are a lot of questions of ISE issued by me in the last time. And guess what - another here.

  I wonder how the ISE license consumption and freeing licenses actually works. At least I have not find any good document or post on it.

  From what I understand, a license (no matter if basic, plus, apex whatever) is consumed based on RADIUS accounting messages.

  Example:

  An endpoint is authenticating and allowed successfully with 802. 1 X without profiling or posture or whatever (simple). The ISE knows that this endpoint must use a base license and basic license consumption is increased by one.

  As soon as the client is disconnected from the network, the n (switch, WLC) sends an accounting stop message to the ISE and the ISE again releases the base license.

  (am I right so far?)

  Assuming that I am just using the example above:

  RADIUS is not say that really reliable. No matter that it uses UDP (which is unreliable), RAY has a mechanism of recognition built in (Accouting request / respone). But this mechanism gives up after a few attempts. Suppose that a client is disconnected, but the message of stop RADIUS is not received by the ISE.

  Fact the endpoint stay forever in the State of the current session and therefore to consume a license forever? (Assume that there is no timer of dot1x re-authentication).

  Or is it a mechanism of 'time-out' for endpoint licences?

  Kind of a side story here:

  I wrote a simple wrapper for the freeradius tool 'eapol_test '. Go Linux applications unique command line EAP (e.g., EAP - TLS) can be issued to a RADIUS server. If the Linux client acts as "supplicant" X 802.1 and authenticator. It's cool to quickly test the availability of the service of an authentication server.

  My simple wrapper for "eapol_test" performs a ping 'EAP' at the time of convergence of measurement and measurement of authentications per second in a lab environment. The wrapper can also change endpoint of each session of RAY MAC. When I do ping EAP in a laboratory of my number of licenses on the ISE exploded, because eapol_test does not deliver messages from accounting RADIUS to EHT :)

  Johannes has soon

  Hi Johannes-

  You're right about the consumption of license:

  Licenses are counted against concurrent, active sessions. An active session is one for which a RADIUS Accounting Start is received but RADIUS Accounting Stop has not yet been received.

  However, in addition to this:

  Note Sessions without RADIUS activity are automatically purged from Active Session list every 5 days or if the endpoint is deleted from the system. 

  This information used in the documentation of ISE 1.x, but for some reason, he is not :) in the 2.x here's the info from 1.2: http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/installation_guide/ise_ig/ise_app_d_man_license.pdf I hope this helps! Thank you for the useful job evaluation!

• Hi, am getting error 28000 when trying to install newly purchased Acrobat Pro DC on my PC Windows 8.1. Have tried listed difficulties, but no luck.

  Hello

  I try to install newly purchased Adobe Acrobat Pro DC on my PC Windows 8.1 but keep

  get the error 28000: the Adobe license purchase of module Installation failed. Reach...

  Help!

  Hello Kent,

  Please try the following: steps:

  > Activate the hidden on Windows 8.1 Administrator account (Ref: http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista / )

  > Disable all non-Microsoft-start Services. (Ref: http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )

  > Disable all Antivirus software like Norton, McAfee etc temporarily from the computer Mc.

  Reboot and try to install in the new active Admin user account and check again.

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.