ISE Migration tool: Unable to connect to the ACS

Similar Questions

• migrate storage fails with 'unable to connect to the host.

  I'm trying to migrate storage of a virtual machine to a different data store. (on the same san)

  When I start work, I see the task:

  Moving the virtual machine / status 'in process '.

  After 10 minutes, I get 2 pop-up windows:

  -

  ---

  Error

  -

  ---

  Unable to connect to the host.

  -

  ---

  Ok

  -

  ---

  I tried to move the storage of another virtual machine, but I got the same error.

  Also tried a different vmhost (but same cluster), but also the same error.

  When you try to a host in a different cluster, it works without problem (same san/store data used in the cluster where I got the errors)

  There is no difference in the profile of security on the host computers.

  Any tips?

  Logfile attached (vpxd - 353.log) when I was running the migrate storage.

  Part of the error:

  2009-11-03 16:49:07.035 02464 info "App" (1257263347020035) VMotion began

  2009-11-03 16:58:35.903 02464 error "App" (1257263347020035) VMotion failed: vim.fault.HostConnectFault

  When it works ok:

  2009-11-03 17:29:49.470 02456 info "App" (1257265789470153) VMotion began

  Hello.

  See KB 1010837.

  Good luck!

• PC migration - converter could not connect to the remote computer. A general error occurred: unknown internal error

  Hello

  I am brand new to fusion m v so forgive me if I miss useful information of the first post time around.

  I try to use migrate your PC, feature of VM Fusion 8 but I see the error in the title of the topic when I try to start the import operation.

  I have disabled the firewall on the PC and MAC

  I tried over ethernet and direct connections

  When I run the migration of PC Windows tool, he complains that UAC is enabled even if it is not (confirmed via Control Panel and evolution via the command prompt)

  When you try to migrate, it accepts the PIN and then shows a warning on this certificate, that I choose to browse

  He will then ask admin username/pass on the PC (I tried my only regular and also tried setting a new admin user and try this)

  After that, I see the error: the migration of PC - Converter could not connect to the remote computer. A general error occurred: unknown internal error

  Should I keep trying to get this working, or that it will be more easy to find a way less direct to turn the PC to a virtual machine on the Mac?

  I found the logs on mac and have posted what I think is the appropriate one below, but not really sure:

  LOGS *.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Log for USB VMware pid = 3550 Arbitration Service version 12.1.0 = Build = build-3272237 option = output

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: The process is 64-bit.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host codepage = UTF-8 encoding = UTF-8

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host is Mac OS X 10.10.5 (14F1713), Darwin 14.5.0

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: VTHREAD initialize main thread 3 'usbArb' tid 119357

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: could not open the file "/ Library/Preferences/VMware Fusion/config ': no such file or directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file found in/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / settings ": not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file not found at/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / config ': not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preferences optional PREF file not found in/dev/null/Non-existing DEFAULT_LIBDIRECTORY / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: DictionaryLoad: could not open the file "/ var/root/Library/Preferences/VMware Fusion / config ': no such file or directory.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Preferences optional PREF file not found in/var/root/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Deactivation of the preferences of the user PREF because disableUserPreferences is set.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: PREF cannot load the user's preferences.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - PARAMETERS GLOBAL/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - NON PERSISTENT

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - USER PREFERENCES

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - default USER IS/var/root / Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - HOST by default IS/Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - SITE by default IS/dev/null/Non-existing DEFAULT_LIBDIRECTORY/config

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: USBArbRuleStore: loading rules of "/ Library/Application Support/VMware/usbarb.rules".

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: VMware USB Arbitration Service Version 15.1.7

  2016 04-21 T 11: 12:50.091Z | machPoll | I125: VTHREAD beginning thread 4 'machPoll' tid 119359

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: trying to connect to an arbitrator on/var/run/vmware/usbarbitrator-socket.

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET create new socket, connect to/var/run/vmware/usbarbitrator-socket

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET connection failed, error 2: no such file or directory

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: unable to connect to the existing arbitrator.

  2016 04-21 T 11: 12:50.398Z | usbArb | I125: USBArb: UsbArbPipeConnected: connected to the customer, outlet: 4

  2016 04-21 T 11: 12:50.399Z | usbArb | I125: USBArb: 3450 Client connected (version: 7)

  Well well just in case someone found this one in the future, the question turns out to be that my PC has been joined to a domain, but I was connected to a local account. I solved the problem by leaving the field. There may be other ways to work around this problem.

• HP Envy Notebook dv6: unable to connect to the proxy server

  I saw an error message "Unable to connect to the proxy server" when I try to connect to the internet via WIFI, even if the label shows who is connected to my home router.

  HR63 wrote:
  

  Thanks for the tip, there is so much information, the laptop with this problem belongs to my daughter and because she doesn't have an internet connection (can not download anything), there is another way to fix it?

  I don't know because the online is where most of the instructions are locate in. I copy and paste the links here, but unless you can print them out or print the online pages it becomes hard, but here are the parts of the txt of it. +

  http://malwaretips.com/blogs/unable-to-connect-to-the-proxy-server-removal/

  How to remove "Unable to connect to the proxy server" (Virus Removal Guide)

  This page is a comprehensive guide, which will remove "Unable to connect to the proxy server" virus from your computer and any other adware program that may have been installed during the installation process.
  Please complete all of the steps in the correct order. If you have any questions or doubts in any point, STOP and ask for our assistance.
  STEP 1: restore the default proxy to your machine settings
  STEP 2: remove failed to connect to the ad software proxy server from Internet Explorer, Firefox and Google Chrome with AdwCleaner
  STEP 3: delete impossible to connect to the proxy server with Junkware Removal Tool browser hijacker
  STEP 4: delete impossible to connect to the virus pop up server proxy with Malwarebytes Anti-Malware free
  STEP 5: check a second time for the "unable to connect to the proxy server" malware with HitmanPro
  (Optional) STEP 6: delete impossible to connect to the proxy server of Internet Explorer, Firefox and Google Chrome ads

  http://www.geckoandfly.com/9275/Internet-connection-error-unable-to-connect-to-the-proxy-server/

  It is with IE

  Step 1 - launch Internet Explorer

  Step 2 - Click the icon "but" it looks like a gear wheel...

  Step 3 - select 'Internet Options '.

  Step 4 - Select the 'connection '.

  Step 5 - Click Lan settings

  Step 6 - uncheck "use a proxy server for your LAN (these settings may not apply to dial-up or VPN connections)."

  Step 7 - click 'Ok' to save the changes

  If you are using a proxy server, check your proxy settings, or check with your network administrator to make sure that the proxy server is running. If you don't believe that you should use a proxy server. Here's a video tutorial:

  Also, if you can since I don't remember which browser your help that gave you this message that I had to go with IE as a default.

• Outlook Express: Unable to connect to the mail server! (error 0x800CCC90)

  original title: Outlook Express: unable to connect to the mail server!

  Im trying to get my outlook express to receive and send messages from my live.com account but it comes back with: the server responded with an error. Account: "Live.com', Protocol: POP3, server response:'-ERR AVG POP3 Proxy Server: cannot connect to the mail server!', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC90."

  Someone knows how to fix this? I tried to remove and add the account again using IMAP instead of POP3, but still get an error message, the e-mail address and the password are all correct and I think that ive got the right to Server (live.com?) Im not exactly computer so any help would be greatly appreciated.

  You will find the right settings for an account on this page live.com: send and receive Hotmail from an e-mail application. To change your settings, select Tools > accounts > {account} > properties and make right onto the tabs of servers and Advanced entries.

  [I moved your question on the forum just for Outlook Express issues.] You should not notice a difference].

  Noel

• Cannot open the synaptics pointing device in windows vista, upgrades are far but message error, unable to connect to the synaptics pointing device

  Hi I have a problem with my mouse/pointer when I click on the mouse to open it I have error message unable to connect to the synaptics pointing device. Have you checked the updates that are up-to-date, and the driver is ok, not sure what to try next need to make any changes to the mouse pointer

  with Brice thanks.

  Hi paiyay,

  Thanks for posting in the Microsoft Community.

  I understand that you are unable to open the synaptics pointing device in windows vista

  · You did changes to the computer before the show?

  · What happens when you click the Yes button in the error message?

  · You are able to use the mouse on the system?

  I suggest you uninstall the software from programs and features and then try to open the properties of the mouse and check if you are able to open the mouse properties then I would you recommend to uninstall the drivers that are installed on the system in the Device Manager and then download the drivers from the link below and check if the problem is resolved.

  http://www.Synaptics.com/support/drivers

  http://www.Synaptics.com/resources/drivers

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Connect the hard disk, and then try running the fix tool of the article below and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  I suggest you to contact the mouse manufacturer for assistance. Click on the link below.

  http://www.Synaptics.com/

  See also:

  FAQ and troubleshooting

  http://www.Synaptics.com/resources/consumer-tips

• Error code: 800ccc0e and the message "Unable to connect to the host server", when you set up Windows Mail to receive discussion group messages.

  I recently signed up for Windows Mail, Windows Vista Help. I have configured my Gmail OK account, but when I click TOOLS then Newsgroups I get the following error: unable to connect to the host server. When I click on show details, he said: Microsoft Community Server: msnews.microsoft.com Protocol: NNTP Port: 119 secure (SSL): 0 Code: 800ccc0e

  msnews. Microsoft.com has not existed for about three years now. MS close their news servers. You can still access newsgroups, but you will have to do with one another as eternal September or AIOE news server.
   
   

• Vista PC is offline, unable to connect to the Internet by LAN or wireless.

  Original title: Vista (Japanese OS)

  My Vista pc is offline (unable to connect to the internet), how install and run the Fixit tool?

  I have read that the English, however, my pc is in Japanese. I can't connect to the Internet by LAN or wireless.
  How can I get the Fixit tool to work on the said pc?
  Help, please!

  Hello

  1. what Fixit tool you try to run?

  2. what exactly happens when you try to connect to the Internet? You receive messages or error codes?

  You can read the following article and check if it helps:

  Windows wireless and wired network connection problems

  You can also read the following article to change the display language:

  Change the display language

  You can use another computer to download the Fix from Microsoft, then use portable storage such as a USB drive, CD, DVD, etc., to carry the Microsoft fix it on your computer.

• Unable to connect to the Administration of Linksys to my WRT54G v.6 page

  Hello

  Recently, I moved into a new House and brought my old router with me.  I set up this router to my former place long ago, but when I hooked it up here, I am unable to connect to the Admin of Linksys page (http://192.168.1.1 for example).  I think that I changed the router what IP to 192.168.1.101... it was a long time ago so I don't remember exactly.  I tried find what it was by typing "ipconfig" in the command prompt and using the address "Default gateway" IP address as the address of router, but that has not worked.

  I tried to reset the router to factory default settings by pressing the button of reset for 30 seconds, then connect to http://192.168.1.1 but it does not help.  When I release the reset button, just power light continues to blink rapidly until I unplug the router.

  I can access the internet without any problem, but I noticed that I connect my router differently than the instructions provided here.  I connect an ethernet cable from my modem to 1 of the 4 ports on the router (just like my laptop) rather than the port of 'internet' on the back.  Don't know if that is related or not, or even what is the cause.

  I use Windows Vista on my laptop if it makes a difference.

  Thanks in advance for your help,

  Ryan

  The modem must be connected to the internet port of the router and the conputer on one of the 4 ports on the router... Now, check if you are able to ping the default gateway of the router. If you get 4 answers then, make broser on the computer settings... Open an IE, click Tools > Internet Options, then click on delete and delete all the files, cookies, history, forms... GoTo 'Connections', make sure that never Dial a connection is selected, click on network settings and make sure that all the options are unchecked... Once you are finished, click OK... Close IE and reopen...

  Now, try to open the linksys configuration page by typing 192.168.1.1 in the address bar. You can also try another computer.

• Unable to connect to the Web sites security and microsoft, but internet is not working properly

  Can anyone help?
  Now, this is getting very frustrating.
  I can connect to the internet and browse most Web sites. My email works fine but I can't connect to websites www.microsoft , Norton is 'unable to connect to the Live Update server, check the internet connection' and my media center can't find my internet connection.
  What is going on?
  I have a subscription to Norton who can't find any problems. I also downloaded onecare and trojan remover, returning with a clean report.
  Please help before I go out what remains of my hair.
  What about Frank

  Hello

  You can access Microsoft.com, McAffee.com, Symatec.com? Thinking you have a conficker.

  Check with this site
  http://www.confickerworkinggroup.org/infection_test/cfeyechart.html

  Alert on the Win32/conficker virus
  http://support.Microsoft.com/kb/962007

  Protect yourself from Conficker
  http://www.Microsoft.com/security/worms/Conficker.aspx

  How to remove the worm Downadup Conficker (Uninstall Instructions)
  http://www.bleepingcomputer.com/virus-removal/remove-Downadup-Conficker

  How to manually remove the Conficker worm
  http://www.411-spyware.com/Conficker-worm-removal#how-to-remove

  BDTool to remove
  http://www.bdtools.NET/

  -----------------------------------------------

  Run the malicious Microsoft removal tool, scan with Malwarebytes, Prevx to be sure you know all the
  malware involved and if necessary use UnHackMe.

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows Update - if necessary, you can download it here.

  Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
  (Then run MRT as shown above.)

  Malicious removal tool from Microsoft
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Malwarebytes - a scanner at the request - update on the updates tab and run whenever you think malware.
  http://www.Malwarebytes.org/

  Here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  also install Prevx to be sure that it is all gone.

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------

  Also do to the General corruption of cleaning.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------

  Run Malwarebytes when you can.

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  Close IE

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Don't forget to do:

  Logon as administrator

  Start - type in the search box-> COMMAND - find on the list above - CLICK RIGHT - RUN AS ADMIN

  Enter each of these one at a time and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset
  ------------------------------------------------------

  Here are a few rootkits if it were a question:

  SpyDLL Remover - free
  http://securityxploded.com/spydllremover.php

  Advanced Windows Service Manager
  http://securityxploded.com/winservicemanager.php

  Run the Rootkit Revealer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb897445.aspx

  UnHackme - trial
  http://www.Greatis.com/UnHackMe/

  This shows how to use UnHackme and includes a link to version 2.5 – use it as a guideline and current
  available as version above is 5.5
  http://safecomputing.umn.edu/guides/scan_unhackme.html

  IceSword - free
  http://www.AntiRootkit.com/software/IceSword.htm
  Instructions and pictorial
  http://securityxploded.com/IceSword.php
  Tutorial for use of IceSword
  http://translate.Google.com/translate?hl=en&SL=zh-CN&u=http://soft.zol.com.CN/2004/0803/145163.shtml&prev=/search%3Fq%3Dicesword%26hl%3Den%26lr%3D

  Revo Uninstaller - free
  http://www.revouninstaller.com/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I have an error msg "Unable to connect to the firewall local host control" is displayed when the system boots

  OS - win7 family Basic 64-bit

  anti virus-macfee
   
  Original title: I have an error msg "Unable to connect to the firewall local host control" is displayed when the system boots. MacAfee antivirus, 1 GB Radeon graphic

  McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• I uninstalled mcafee, now unable to connect to the Internet.

  I uninstalled mcafeenow unable to connect to the Internet. Error messages (unidentified network) (investigating problems of modem router or broadband) (connection to the network Local is not valid ip configuration have uninstalled mcafee, now unable to connect to the Internet. Error messages (unidentified network) (investigating problems of modem router or broadband) (connection to the Local network does not have a valid ip address configuration)

  If you have not done so before, run the McAfee Consumer products removal tool symptoms not to do are not documented and are supposed to be unpredictable.  You must reinstall your new security application after completing the McAfee removal.

  Then all the least, your symptoms of failure could guide someone to be able to help.

• Unable to connect with the Mac computer?

  Unable to connect with the Mac computer?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -Run "Difficulty Host File" option https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• vCenter Server displays the error message: unable to connect to the host

  vCenter Server displays the error message: unable to connect to the host

  Symptoms

  • vCenter Server cannot connect to a host when you perform operations such as:

  •

  o Storage vMotion

  o cold migration

  o cloning a virtual machine

  o the model deployment

  • Newspapers vpxd that contains an entry similar to:

  [2009-06-04 19:27:16.326 error "App" 4444] [VpxdInvtHost] IP address change for 10.223.122.143 to 10.223.127.197 unhandled, verification of the SSL certificate is not enabled.

  • You see errors similar to:

  Unable to connect to the host o

  o [2009-06-04 19:27:09.952 'Libs' 3902384 WARNING] [NFC ERROR] NfcNewAuthdConnectionEx: unable to connect to peer (numRetries = 2). Error: Unable to connect to the host 10.223.122.143: connection timed out

  • vCenter Server shows the VMS as being disconnected then connected.

  Hello

  Resolution

  Cause

  This problem can occur if an ESX host's IP address is changed while being managed by vCenter Server.

  Check the cause

  To check the cause of the problem:

  1. Log in as root to the ESX host using a SSH client.
  1. In the file etc/opt/vmware/vpxa/vpxa.cfg, find the IP address of the host. The entry looks like:

     
     10.21.48.121
     

     Note: for more information about editing the files, see installation in VMware ESX configuration files (1017022).

  Troubleshooting

  If the IP address is incorrect, perform the following steps in order. If the operation does not resolve the problem, continue to the next step. Don't skip a step.

  1. Disconnect and then reconnect the host:
  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Reconnect the ESX host in vCenter Server.
  1. Restart the VirtualCenter agent on the ESX host:
  1. Stop the service of vpxa with the command:

     # service vmware-vpxa stop

  1. Open the /etc/opt/vmware/vpxa/vpxa.cfg file in a text editor and correct the IP address of the ESX host.
  1. Start the service of vpxa with the command:

     # service vmware-vpxa start

     Note: for VMware ESXi, you may have to restart all the management agents. For more information, see restart the agents on an ESX or ESXi Server (1003490) management .

  1. Rebuild the VirtualCenter agent on the ESX host configuration file:

     Attention: this step removes all the Statistics counters historical host and the virtual machine. If VMware ESX host is running in virtual machines that starts in a permitted CVS environment, you maybe won't be able to add the host without stopping the virtual machines first.

  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Remove the ESX host disconnected from vCenter Server.
  1. Backup the file vpxa.cfg with the command:

     # mv /etc/opt/vmware/vpxa/vpxa.cfg /etc/opt/vmware/vpxa/vpxa.oldcfg

  1. Add the ESX host disconnected to the server vCenter inventory.
  1. Run the following command to view the contents of /etc/opt/vmware/vpxa/vpxa.cfg and confirm that the host IP address is correct:

     # cat /etc/opt/vmware/vpxa/vpxa.cfg

• Unable to connect to the MKS: the operation is not allowed in the current state

  Hi all

  After the upgrade of vmware tools, we have a problem while safeguarding a guest vm with avamar. VM freezes and he said; "Unable to connect to the MKS: the operation is not allowed in the current state.  It can be stopped only by killing the task in the service on the host esx console.

  VMware vCenter Server 5.1 - 5.1.U1b - 1235232

  2013 12-19 T 00: 49:15.146Z | vCPU-1 | W110: MONITOR PANIC: vcpu - 0:NOT_IMPLEMENTED devices/vide/iovmk/videVMK-vmkio.c:1492

  2013 12-19 T 00: 49:15.156Z | vCPU-1 | I120: Core dump with construction build-1065491

  2013 12-19 T 00: 49:15.156Z | vCPU-0 | I120: Exit vcpu-0

  2013 12-19 T 00: 49:15.156Z | vCPU-1 | W110: Writing monitor corefile "/ vmfs/volumes/4ff12f8d-9d4d7a89-9341-e4135bb796b4/TEADEV/vmmcores.gz".

  2013 12-19 T 00: 49:15.202Z | vCPU-1 | I120: Save the anonymous memory

  2013 12-19 T 00: 49:15.209Z | vCPU-1 | W110: Dumping core for vcpu-0

  2013 12-19 T 00: 49:15.209Z | vCPU-1 | I120: CoreDump: dumping core with superuser privileges

  2013 12-19 T 00: 49:15.209Z | vCPU-1 | I120: VMK battery for vcpu 0 is 0 x 412248155000

  2013 12-19 T 00: 49:15.209Z | vCPU-1 | I120: Start monitor coredump

  2013 12-19 T 00: 49:16.454Z | vCPU-1 | I120: End monitor coredump

  2013 12-19 T 00: 49:16.455Z | vCPU-1 | W110: Dumping core for vcpu-1

  2013 12-19 T 00: 49:16.455Z | vCPU-1 | I120: CoreDump: dumping core with superuser privileges

  2013 12-19 T 00: 49:16.455Z | vCPU-1 | I120: VMK battery for vcpu 1 is at 0x4122481d5000

  2013 12-19 T 00: 49:16.455Z | vCPU-1 | I120: Start monitor coredump

  2013 12-19 T 00: 49:17.420Z | vCPU-1 | I120: End monitor coredump

  2013 12-19 T 00: 49:17.421Z | vCPU-1 | W110: Dumping extended monitor data

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | W110: A core file is available in "/ vmfs/volumes/4ff12f8d-9d4d7a89-9341-e4135bb796b4/TEADEV/vmx-zdump.000".

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: Msg_Post: error

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: fatal error [msg.log.error.unrecoverable] VMware ESX: (vcpu-1)

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120 + vcpu - 0:NOT_IMPLEMENTED devices/vide/iovmk/videVMK-vmkio.c:1492

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.haveLog], a log file is available in "/ vmfs/volumes/4ff12f8d-9d4d7a89-9341-e4135bb796b4/TEADEV/vmware.log".

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.requestSupport.withoutLog] you can ask support.

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.requestSupport.vmSupport.vmx86]

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120 + to collect data to be submitted to the technical support of VMware, run 'vm-support.

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.response] we will respond on the basis of your entitlement to support.

  We realized that the problem is our url filtering service checkpoint firewall. When we have disabled all begins to work very well.