Issue in the creation of the workload file.

Similar Questions

• Windows cannot perform the extraction. The destination file could not be created.

  I get the above error message everytime I try to install an update to a program that I have and use daily.

  The program provider is a loss to explain why this happens, but it happens on two different computers.

  Hello Connie,.

  In general, this message occurs when the ZIP file in an area protected.

  To resolve this issue, move the ZIP file in one of your folders of sup of user profile, like downloads, Documents, photos, etc.  Then try to extract the files.

  If this does not work, the ZIP file may be damaged.  You must replace it with a new download of the source.

  Mr. Doug in New Jersey

• Issue to the creation/editing UCM contributor data file

  Hello

  We have the requirements below:

  (a) create a contributor by program data file, and not using the contributor of the Studio Site for a definition of region RD1, by using a custom, template not the model of default.xml provided by the Studio (SS) Site.

  I created a data contributor using RD1 file and set it as your primary file to create other files of data for this RD1. I used CHECKIN_NEW IDC service to create the data file. PFA the code snippet. I was able to successfully create the data file.

  (b) change the correct display of data file

  However when I try to modify the data of the University Complutense of MADRID, I get the error message. PFA file error message.

  I would like to know if there is no Site Studio IDC service to create web resources based on the custom template. I want to create assets web Webcenter application and no contributor Site Studio.

  Hi Nikhil,

  Try this piece of code:

  DataBinder dataBinder = idcClient.createBinder ();

  dataBinder.putLocal ("IdcService", "SS_CHECKIN_NEW");

  dataBinder.putLocal ("xRegionDefinition", prop.getProperty ("regiondefinition"));

  dataBinder.putLocal ("dDocTitle", prop.getProperty ("title"));

  dataBinder.putLocal ("dSecurityGroup", "Public");

  dataBinder.putLocal ("ssDefaultDocumentToken", "SSContributorDataFile");

  dataBinder.addFile ("primaryFile", new leader (prop.getProperty ("filename")));

  dataBinder.putLocal ("xWebsiteObjectType", "Data file");

  dataBinder.putLocal ("dDocType", "Document");

  dataBinder.putLocal ("dataFileFieldValue", "Data file");  This parameter is passed when no particular site is selected in the menu drop-down

  Here I've created a companion file where in all connection and defintion region ucm to be fixed this CDF are defined.

  filename - this one is set to default.xml (to check normal working)

  regiondefinition - this is the content of Dr id to which is attached the cdf.

  title - title of the element content according to customer's requirement.

  With this code, test and whether the requirement that you are looking for is completed and update results.

  Thank you

  Srinath

• How can I create a multi page PDF from a multi .tif file?  On the creation of a file .pdf from a file multiple .tif, the .tif file is converted to a single page (always the first page of the .tif file) .pdf.  The rest of the document is cut off. The .tif

  How can I create a multi page PDF from a multi .tif file?  On the creation of a file .pdf from a file multiple .tif, the .tif file is converted to a single page (always the first page of the .tif file) .pdf.  The rest of the document is cut off. The .tif file comes from a document by using the fax & Scan app scanner in Windows 10.  I am running Adobe Acrobat Reader DC, which I run with my subscription 'Adobe PDF package, monthly'.  It worked fine until about a month.  I've since upgraded to Windows 10 and Acrobat Reader DC.   I would be very grateful for any help. Eoghainn

  Hello

  This problem has been reported as a bug. Our team of engineers working on this priority issue.

  Kind regards
  Nicos

• How can I specify location of the control file when the manual creation of DB?

  DB version: 11.2.0.4

  OS: Oracle Linux 6.6

  The CREATE DATABASE command creates the control file.

  CREATE DATABASE command is executed once you start the instance in NOMOUNT State as shown below.

  SQL > startup nomount pfile=$ORACLE_HOME/dbs/initBRCPRD.ora

  SQL > create database 'BRCPRD '.

  MaxInstances 32

  MAXLOGHISTORY 1

  maxLogFiles 192

  maxlogmembers 3

  ..

  .

  .

  < snipped >

  When you create the database manually, we can define the control_files parameter in the init.ora as below and control file will be created at this location. Right?

  control_files = ("" / u01/oradata/BRCPRD/BRCPRD_control01.ctl","/u01/oradata/BRCPRD/BRCPRD_control02.ctl "")

  When I was generating the DB using DBCA GUI creation scripts, it asks to enter the location of the Online redo logs and control files.

  I entered my desired location. But, I couldn't find CONTROL_FILES parameter in the init.ora file generated the DBCA. This is why I got confused. I think that DBCA is internally somehow. So thought I'd post it here.

  Hi John, OP

  Just checked the init.ora file created by DBCA. Although the parameter CONTROL_FILES is undefined, db_create_file_dest = '+ DATA_DG1' was created. OMF default location is defined by the db_create_file_dest parameter.

  So, I could safely use this script for the manual creation of DB, and during the CREATE DATABASE command execution, oracle will place CONTROL_FILES + DATA_DG1 using the format;

  +DiskGroup/dbname/filetype/filetypetag.file.incarnation

• See Planner 3.0 - Single-VM Test Local, the batch file runs, but the workload does not run

  Hi all

  See planner 3.0 running on vSphere 5.1. When I run the test local (Windows 7 x 64), see planner was able to power on

  the office and run the batch (server.bat) file, but the workload does not start. I checked the Planner view agent service

  is started on the desktop.

  
  

  Planner view device

  

  GoldenDesktop, batch file is running

  

  Any help would be appreciated.

  AJI

  Can you try to raise the rise time and see if the problem persists? There is also a log file in C: drive, c:\viewplanner-desktopagent.log--vous can attach this file?

• Confusion of creation for the log file

  SQL*Plus: Release 10.2.0.3.0 - Production on Mon Mar 11 11:42:45 2013
  Copyright (c) 1982, 2006, Oracle.  All Rights Reserved.

  There is some initialization parameters that decide the location of the log online redo generally files. These initialization parameters are
  
  -DB_CREATE_ONLINE_LOG_DEST_n
  -DB_RECOVERY_FILE_DEST
  -DB_CREATE_FILE_DEST
  
  I did not understand the level of priority of these settings if you assign each of them to create the online journal file, if I put all these setting then by creating online log file always va-the path that define in the DB_CREATE_ONLINE_LOG_DEST_n parameter and ignores the other parameters (DB_RECOVERY_FILE_DEST DB_CREATE_FILE_DEST).
  
  If I just set the last two (DB_RECOVERY_FILE_DEST, DB_CREATE_FILE_DEST) and do not set the DB_CREATE_ONLINE_LOG_DEST_n created in the two location DB_RECOVERY_FILE_DEST, DB_CREATE_FILE_DEST log file) with mirrored mechanisim.
  

  SQL> select name,value
    2    from v$parameter
    3   where upper(name) in ('DB_CREATE_ONLINE_LOG_DEST_1','DB_RECOVERY_FILE_DEST','DB_CREATE_FILE_DEST')
    4  /
  
  NAME                                                                             VALUE
  -------------------------------------------------------------------------------- -------------------
  db_create_file_dest                                                              D:\ORACLE\PRODUCT\10.2.0\DB_1\dbfile
  db_create_online_log_dest_1
  db_recovery_file_dest                                                            D:\oracle\product\10.2.0\db_1\flash_recovery_area
  
  
  SQL> select * from v$logfile
    2  /
  
      GROUP# STATUS  TYPE    MEMBER                                                                               
  ---------- ------- ------- -------------------------------------------------------------------------
           3         ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG                                     
           2         ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG                                     
           1 STALE   ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG                                     
  
  
  SQL> alter database add logfile
    2  /
  
  Database altered.
  
  SQL> select * from v$logfile
    2  /
  
      GROUP# STATUS  TYPE    MEMBER                                                                                       
  ---------- ------- ------- -------------------------------------------------------------------------
           3         ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG                                             
           2         ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG                                             
           1 STALE   ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG                                             
           4         ONLINE  D:\ORACLE\PRODUCT\10.2.0\DB_1\DBFILE\ORCL\ONLINELOG\O1_MF_4_8MTHLWTJ_.LOG                    
           4         ONLINE  D:\ORACLE\PRODUCT\10.2.0\DB_1\FLASH_RECOVERY_AREA\ORCL\ONLINELOG\O1_MF_4_8MTHLZB8_.LOG

  As you can see above the result, create a log file share setting the parameters DB_RECOVERY_FILE_DEST, DB_CREATE_FILE_DEST), when I set the DB_CREATE_ONLINE_LOG_DEST_1 parameter, the log file creation is going to set in the DB_CREATE_ONLINE_LOG_DEST_1 parameter only, no matter what you set for DB_RECOVERY_FILE_DEST DB_CREATE_FILE_DEST). You can go there.

  SQL> alter database drop logfile group 4
    2  /
  
  Database altered.
  
  SQL> select * from v$logfile
    2  /
  
      GROUP# STATUS  TYPE    MEMBER                                                                       
  ---------- ------- ------- -------------------------------------------------------------------------
           3         ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG                             
           2         ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG                             
           1 STALE   ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG                             
  
  
  SQL> alter system set db_create_online_log_dest_1='D:\oracle' scope=both
    2  /
  
  System altered.
  
  SQL> select name,value
    2    from v$parameter
    3   where upper(name) in ('DB_CREATE_ONLINE_LOG_DEST_1','DB_RECOVERY_FILE_DEST','DB_CREATE_FILE_DEST')
    4  /
  
  NAME                                                                             VALUE
  -------------------------------------------------------------------------------- -------------------
  db_create_file_dest                                                              D:\ORACLE\PRODUCT\10.2.0\DB_1\dbfile
  db_create_online_log_dest_1                                                      D:\oracle
  db_recovery_file_dest                                                            D:\oracle\product\10.2.0\db_1\flash_recovery_area
  
  SQL> alter database add logfile
    2  /
  
  Database altered.
  
  SQL> select * from v$logfile
    2  /
  
      GROUP# STATUS  TYPE    MEMBER                                                                               
  ---------- ------- ------- -------------------------------------------------------------------------
           3         ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG                                     
           2         ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG                                     
           1 STALE   ONLINE  D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG                                     
           4         ONLINE  D:\ORACLE\ORCL\ONLINELOG\O1_MF_4_8MTJ10B8_.LOG                                       

  My confusion here is why the mechanisim of (DB_RECOVERY_FILE_DEST, DB_CREATE_FILE_DEST) is him even while the same with both of them becomes differ when you set
  'DB_CREATE_ONLINE_LOG_DEST_n '?

  DB_CREATE_FILE_DEST is used if DB_CREATE_ONLINE_LOG_DEST_n is not defined.

  Db_recovery_file_dest is used to multiplex logs files.
  For example, if Oracle uses DB_CREATE_FILE_DEST (because DB_CREATE_ONLINE_LOG_DEST_n is not defined), it multiplexes the logfile to DB_RECOVERY_FILE_DEST if DB_RECOVERY_FILE_DEST is also defined.
  If, however, DB_CREATE_ONLINE_LOG_DEST_1 is used, Oracle wait allows you to set the DB_CREATE_ONLINE_LOG_DEST_2 as well for the multiplexing of the file journal; Otherwise, it assumes that you do not want the multiplexed log file. The fact that the parameter ends with an n means that Oracle uses the n = 2 f or the multiplex if defined location.

  Hemant K Collette

• What are the unnecessary files and is at - it issues removing them?

  I need to free up some space because I ran. But I'm afraid if I delete some unnecessary files, it will have an impact on my PC.

  What type of files 'undesirables '?

  Please be more explicit. In general, Yes, because they are "undesirable".

  You can clean everything in the folder % TEMP except files currently locked. Is better to clean temp folder immediately after restarting Windows.

  What do you mean that you have run out of free space. A tool like CCleaner will identify the "junk" files that can be deleted.

• Win. Creation of DVD. The Video_ts files and bup files.

  Make a movie on Windows DVD maker. But when I put the disc in my DVD/CD drive on comp. it does not show the name of the movie in my dvd drive E: it reads Video_TS.

  Although I don't think I can change the name of THIS movie, is there a door way the title I want to show when it is inserted into my dvd player to my next film I do?

  2nd, it backs up the files on this disc, are or is there other files, I should copy on my comp. and save in case I ever need to make another copy of this film. I saved the file (.msdvd), then I make another copy with exactly that. (I don't want a copy of the film saved on my computer. Too much space lost)

  Make a movie on Windows DVD maker. But when I put the disc in my DVD/CD drive on comp. it does not show the name of the movie in my dvd drive E: it reads Video_TS.

  Although I don't think I can change the name of THIS movie, is there a door way the title I want to show when it is inserted into my dvd player to my next film I do?

  2nd, it backs up the files on this disc, are or is there other files, I should copy on my comp. and save in case I ever need to make another copy of this film. I saved the file (.msdvd), then I make another copy with exactly that. (I don't want a copy of the film saved on my computer. Too much space lost)

  =========================================
  FWIW... VIDEO_TS is a standard folder which is present on all
  DVD-video.

  No.... you can not re - edit a completed video DVD.

  In addition the project MSDVD file, you all the original
  the source files in their original... locations that are not included in
  the MSDVD file. Think of it as a recipe for a movie.

  If you want copies of an existing DVD Maker DVD...
  be an easy task to create an ISO Image of the DVD, then
  burn as many copies as you need. ImgBurn free software can
  do this.

  The following items may be worth a visit:

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
  (scroll down to: how to customize the DVD menu)

  Windows Vista - DVD - video burning - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

  Windows Vista-
  Change Windows DVD
  Settings of the DVD - Video Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Windows Vista - Windows DVD Maker
  http://www.windowsvistauserguide.com/windows_dvd_maker.htm

  The Beginner Guide to creating Windows DVD
  http://www.windowsdvdmaker.com/guides/beginner/

  Windows Vista-
  Work with projects in Windows DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-projects-in-Windows-DVD-Maker

  .msdvd file extension
  http://www.Cryer.co.UK/file-types/m/msdvd.htm

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Confused about the creation of a .db file for the first time in the property fodler

  How can I create a file .db for the first time and bring it to assets by program? If I have to create manually on the current folder, then how I can modify it. I read something about copying program to a different folder and edit it. But then I have to copy it on record new assets which should be limited by program. According to me, Miss me something here. But I can't know that. I really need help on this problem. Thank you.

  The only way you will get a file .db in assets / are to put it there on your PC, when package you it application.

  This file is supposed to be read-only in your application? If this isn't the case, you don't want it in the current folder anyway.

  Maybe you can explain why you think that you must have a .db in the active folder anyway, instead of somewhere else. Is there that a documentation means that you should put this active file? Or are you assuming that the current folder is special somehow I suspect, that he really isn't, at least for the .db files?

• RMAN issues - no backup or copy of the data file found

  Oracle 11 g 2

  Linux RHEL 6.5

  I inherited a database backup and restore question since the DBA is OoO.

  Here is the script used for the backup:

  Configure default device the disk type;
  Configure controlfile autobackup on;
  Configure controlfile autobackup peripheral type disc format in ' / u01/app/oracle/bkp/controlfile/%F.ctl';
  Configure retention policy to recovery of 30-day window;
  View all;
  Run {}
  stop immediately;
  bootable media;
  allocate channel dup1 device type disk;
  allocate channel dup2 device type disk;
  SQL "create pfile =" /u01/app/oracle/bkp/pfile/initpfile.ora "of spfile;
  backup format ' / u01/app/oracle/bkp/cold_db/cold_bkp_%U' database;
  output channel dup1;
  output channel dup2;
  ALTER database open;
  }

  When I try the following restore script:

  run
  {
  Start pfile='/u01/app/oracle/bkp/pfile/initpfile.ora' nomount;
  Restore controlfile to ' / u01/app/oracle/bkp/controlfile/c-123131414-20140509-00.ctl';
  change the editing of the database;
  restore the database;
  ALTER database open resetlogs;
  }

  I get error RMAN-06023: no backup or copy of the data file found

  I'm trying to restore a database backup from 5 days ago and I use this backup control file.
  

  I'll close this discussion and continue to involve the Oracle.  Thank you all for your help.

• Registration issues of the meta data to image in the menu Organizer file

  I've been test Organizer to 14 items in replacement of the Windows Photo Gallery.  I like the product a lot, but I am concerned about the way that it is saving metadata back to the image file, which for me is essential.

  When I save the metadata in the image file, I then test it by removing the connection from the menu Organizer while keeping the file in its original location.  I then re-import the file to see if the metadata is intact.  It turns out that keywords and caption are fine, but not the tags people.  What came out as beacons of people with locations of the people in the photo is such that people tags have been converted to keywords, and the location information of people are completely missing.  For me, this is unacceptable, because it means that if I do things with the file outside the connection to the host catalog so that data is lost forever.

  If others have found to be true?  Am I correct in what's going on here?  If Adobe is listening here, this is a problem and something that must be solved in the future?  Again, I like the product, but it is a critical question that will prevent me from implementing for my needs.

  Thanks for the replies.

  rawbug wrote:

  In your approach to use personal names as keywords you obviously cannot then display location of the person in the image.  You would have to address this problem in the legend (very old school, but apparently where we are at this stage of standardization).

  Yes, you have it perfectly.

  I do not at all for the location of the person in the image.

  Marking of the people is too important for me to trust an automated process, family history or genealogy.

  I'm very 'old school' (which means effective) and I don't use legends to this end, unless I am dealing with a few people. Furthermore, the Organizer is incredibly fast in search of people by their names included in a legend.

  The path of the 'old school' when you have a group photo (weddings...) is to create a note, not a legend. Same ease as legend to extract a single name of a group of 50.

  And this makes my "skinny" catalog, it's faster and with much less risk of corruption.

• Help with the creation of color sets in the Illustrator file

  I'm repeating a specific background image on every page of a calendar and want to change its colors on each page. There are 2 shades in the image using a total of four different colors. I am not at all skilled in the theory of color and I was wondering if someone can please tell me if there is an easy way to come with harmonious color combinations that I can apply to the original Illustrator file? My solution shortcut would be to convert color to grayscale and apply a color overlay, but the image will seem just flat when I do this. I prefer to set the gradients individually but do not know how to find the compatible colours.

  Here's a preview of the image, followed by a DropBox link to the Illustrator file.

  

  https://DL.dropboxusercontent.com/u/52882455/background1.AI

  Thank you!

  Couple for you ideas:

  First of all, try to use the color wheel on color.adobe.com.  Select the middle color and add your hex code of the color.  The app will automatically show you similar colors.  See an example of here. You can also experiment with other rules of color in the color rule menu (just click on one of them).

  Second, take a look at themes created by others.  If you are generally looking for colors that work well with the yellow, you can browse the most popular themes and identify some that use yellow.

  I hope this helps.

• Creation of files PDF RoboHelp adds in unnecessary indentation in the output file

  Everyone knows that when you create a PDF file of your source of RoboHelp, on certain pages of the PDF output, there is a large dash added to certain pages? He pushes the text on the pages to the right. It does not appear to be linked to any particular type of formatting in the source file. It happens with h1s, p tags, and and the ol and ul tags.

  Is this something that happens when converting Word, or is it something that can be controlled in the source of RoboHelp project? What can be done to prevent this indenting. I have several outputs that I need to generate and would rather avoid having to change each Word file.

  I enclose a photo that shows what I mean. The text is almost aligned under the header.

  

  Hi Peter,.

  Something interesting. My source files, I had a number of tags

  , which seemed to force indentation when we generated PDFs. remove tags

  source prevented indentation that occur in the output PDF file.

• Creation of the control file has no

  Hi all
  
  
  
  When I am creating the control file my terminal is suspended on the next step
  
  SQL > @/u02/ORACLE/orcldb/9.2.0/dbs/contrl.sql
  ORACLE instance started.
  
  Total System Global Area 581506668 bytes
  Bytes of size 452204 fixed
  402653184 variable size bytes
  167772160 of database buffers bytes
  Redo buffers 10629120 bytes
  54
  
  and in the log file alert receive no error

  Hi, Frank.

  Very nice work Helios (as usual).

  Thank you, I share just what I know thatsall

  Thank you, I learned something new today.

  The same for all users of the forum

  Normally, I clone cold backups so I don't need to manually create the controlfile.

  I see that your solution is contained in the following note;
  "Cloning of Oracle Application 11i with rapid Clone /R12 - database (9i/10 g / 11 g) using on Open Database [ID 760772.1] hot backup.

  You are correct, we mainly use this method for hot backup-Section advance clonning

  But I'm still curious to know if Nicolas is to create a clone of a hot backup or a backup to cold, and why he uses the 'ARCHIVELOG' option on his clone.

  It depends, for me I prefer to choose option NOARCHIVELOG and NORESETLOG

  Please check:
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/statements_5003.htm

  Respect of
  HELIOS