Win. Creation of DVD. The Video_ts files and bup files.

Similar Questions

• Win 7 by default, the white arrow and the "cursor corrupted files" pop-up windows.

  Original title: Max the mouse

  I had a little friendly MS mouse pointer / cursor schema greet me on the initialize upward from Win 98 to Win 2000 Milnm, finally to Win XP.  It was simple, little grey mouse that has nibbled cheese if the program was busy.  Since the abandonment of Win XP, I bought a Dell E6440 with Win 7 Pro installed. I used a USB transfer cable / program to migrate settings and files above. My favorite mouse pointer scheme is not. I tried to change my plan of cursor recorded, but Win 7 by default, the white arrow and the "cursor corrupted files" pop-up windows.

  Someone at - he saw this original classic pointer / cursor for Win 7 64 bit?

  Thank you, Mr. Singh. That did not help.  But for the record, I finally found the correct cursor plan I was looking here: http://www.rw-designer.com/cursor-set/mouse download a .zip file that I had bad access to when you change the pointer of the mouse, but resolved by downloading each schema of cursor .ani and .cur individually on the site. I used this from Win 98 to Win XP.

• When I try to play a CD or DVD, the door opens and I get a message "insert a support and try.

  When I try to play a CD or DVD, the door opens and I get a message "insert a support and try. But the anti-virus scan of the device and report No. ERROR. Only play is not possible

  When I try to play a CD or DVD, the door opens and I get a message "the drive is empty. Insert media and try. " But many programs, such as antivirus programs analyzing the device and NO ERROR report. It is not possible to play alone.  No player of media, including Windows Media Player 11 or Windows Explorer does not recognize the presence of the media. I tried with many CD and DVD that plays normally on other computers with similar OS and also on DVD players.

  My computer has Windows Vista Home premium with Service Pack 2.

  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Hello

  Click right tab taskbar - task - process - make sure WMPlayer.exe Manager, nor any other
  the player is responsible - in the affirmative PROCESS END on them and try again.

  -----------------------

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and your must read on the edge outside these tolerances of discs.
  They may be delivered, but it is generally more economical to replace the disk. Can burn you
  a mastered CD and a DVD mastered on this computer and laptop and other computer
  machines? Can you do the same on the laptop and play in this machine?

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Need help to understand the last string on my Win 7 BSOD. The Minidump files are attached.

  Hello

  Since last week, I've known several BSOD. Some have referred to a memory problem, but after you run a memory diagnostic seveal times, I still have to find the problem.

  Since last week, here is the link to the minidump files.

  https://onedrive.live.com/redir?RESID=2FA3EA1D7C87B0CD! 471 & authkey =! AA05X_X_DXaEOgc & ithint = % 2cdmp

  Thanks in advance for any help you can give.

  These accidents were related to the corruption of memory (probably caused by a driver).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Since then, it is more likely to be a pilot run everything first.

  1-Driver Verifier (for full instructions, see our wiki here)

  
  

  If the auditor does not have the issue we move to it.

  2-Memtest. (You can learn more about running memtest here)

  
  

  If you cannot start after you have enabled the auditor reboot in safe mode

  In Vista & victory (F8)

  When win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-Windows-8-the-easy-way/

  
  

  Co-written by JMH3143

  .

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading file Dump [C:\Users\Ken\Desktop\New folder\080714-32011 - 01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred srv * C:\Symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: srv * C:\Symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 7601.18409.amd64fre.win7sp1_gdr.140303 - 2144
  Computer name:
  Kernel base = 0xfffff800'03660000 PsLoadedModuleList = 0xfffff800'038 has 3890
  The debugging session: Thu Aug 7 14:15:03.891 2014 (UTC - 04:00)
  System Uptime: 0 days 4:02:55.202
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ........................
  Loading user symbols
  Loading unloaded module list
  .......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 50, {fffff6e400084040, 0, fffff800036e7f42, 5}

  Could not read the name of the problem driver
  Probably caused by: memory_corruption (nt! MiUpdateWsle + 122)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  PAGE_FAULT_IN_NONPAGED_AREA (50)
  Invalid system memory was referenced.  This cannot be protected by try-except,
  It must be protected by a probe.  In general, the address is simple bad or it
  pointing to freed memory.
  Arguments:
  Arg1: fffff6e400084040, memory referenced.
  Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
  Arg3: fffff800036e7f42, if not zero, the address of the instruction that refers to bad memory
  address.
  Arg4: 0000000000000005, (reserved)

  Debugging information:
  ------------------

  Could not read the name of the problem driver

  READ_ADDRESS: GetPointerFromAddress: unable to read from fffff8000390d100
  GetUlongFromAddress: cannot read fffff8000390d1c0
  fffff6e400084040 non paged pool

  FAULTING_IP:
  NT! MiUpdateWsle + 122
  fffff800'036e7f42 498b 00 mov rax, qword ptr [r8]

  MM_INTERNAL_CODE: 5

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

  BUGCHECK_STR: 0 X 50

  Nom_processus: vsserv.exe

  CURRENT_IRQL: 0

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  TRAP_FRAME: fffff8800970b550-(.trap 0xfffff8800970b550)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = 0000098000000000 rbx = 0000000000000000 rcx = 0000000000000a0f
  RDX = 0000c 80010808009 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff800036e7f42 rsp = fffff8800970b6e0 rbp = 0000000000000c 70
  R8 = fffff6e400084040 r9 = 0000000fffffffff r10 = fffff70001080488
  R11 = 000000000000116e r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv in pe of na EI ng nz cy
  NT! MiUpdateWsle + 0 x 122:
  fffff800'036e7f42 498b 00 mov rax, qword ptr [r8] ds:fffff6e4'00084040 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff800037525b3 to fffff800036d5bc0

  STACK_TEXT:
  "fffff880 '0970b3e8 fffff800' 037525b 3: 00000000'00000050 fffff6e4 ' 00084040 00000000 00000000' fffff880 ' 0970b 550: nt! KeBugCheckEx
  fffff880 '0970b3f0 fffff800' 036d3cee: 00000000 00000000' fffff6e4 ' 00084040 fffffa80' 04122600 fffffa80'00000028: nt! : FNODOBFM: 'chain' + 0 x 43801
  fffff880 '0970b 550 fffff800' 036e7f42: fffffa80'00000028 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiPageFault + 0x16e
  fffff880 '0970b6e0 fffff800' 036f41bd: 00000000' 00000a0f 00000000' 23ba4548 fffff700 ' 01080000 fffff700' 01080000: nt! MiUpdateWsle + 0 x 122
  fffff880 '0970b 750 fffff800' 036f39df: 20f00001 '63eb7025 00000001' 63eb7121 fffffa80' 04e10200 00000000' 00000000: nt! MiCompleteProtoPteFault + 0x2cd
  fffff880 '0970b7e0 fffff800' 036f24f3: 00000000' 0016bd60 000007fe'fbef34ac fffff683 'ff7df798 fffffa80' 07f6cd08: nt! MiResolveProtoPteFault + 0x1cf
  fffff880 '0970b 870 fffff800' 036e2179: 00000001 00000000' 000007fe 'fbef34ac fffffa80' 09a44af0 00000000' 00000000: nt! MiDispatchFault + 0x1c3
  "fffff880 '0970b 980 fffff800' 036d3cee: 00000000 ' 00000008 000007fe ' fbef34ac fffff880'00000001 00000000' 0863fe50: nt! MmAccessFault + 0 x 359
  fffff880 '0970bae0 000007fe' fbef34ac: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiPageFault + 0x16e
  00000000' 0863fb68 00000000'00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x000007fe'fbef34ac

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! MiUpdateWsle + 122
  fffff800'036e7f42 498b 00 mov rax, qword ptr [r8]

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: nt! MiUpdateWsle + 122

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  DEBUG_FLR_IMAGE_TIMESTAMP: 531590fb

  IMAGE_VERSION: 6.1.7601.18409

  Nom_image: memory_corruption

  FAILURE_BUCKET_ID: X64_0x50_nt! MiUpdateWsle + 122

  BUCKET_ID: X64_0x50_nt! MiUpdateWsle + 122

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:x64_0x50_nt! miupdatewsle + 122

  FAILURE_ID_HASH: {adc90a39-f60f-e57a-aeeb-d2a428d2eb03}

  Follow-up: MachineOwner
  ---------

• Compaq Presario SR2177 BSOD Win 7 - help analyze the .dmp file.

  New installation of Win 7 Home Premium, Compaq Presario SR2177CL.

  AMD X 2 3800 + 2 GHz Dual-Core CPU

  1 GB of DDR2 Ram (2 x 512)

  HDD Sata 200 GB WD

  After a clean, led installation to all updates MS blue screens started.

  MemTest 86 +: pass

  HARD drive test: pass

  Last crash dump file is here:

  https://SkyDrive.live.com/?CID=e714ffc82e58b1a6#CID=E714FFC82E58B1A6&ID=E714FFC82E58B1A6%21174

  As noted, this is a clean install, online only for MS. updates I tried to parse the file .dmp myself, but certainly need some help here.

  Power supply tested ok without ceiling blown on the Council, the onboard video, the lan & sound. No cards installed.

  Blue screen appears almost immediately once the initialization is complete.

  Thanks in advance for any suggestions.

  PDI

  Stop 0 x 124 is a hardware error
  If you are overclocking try to reset your settings to standard processor and see if that helps.
  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:

  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.

  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).

  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.

  (4) update the BIOS of your motherboard according to the manufacturer's instructions.
  Their website should provide detailed instructions on the brand and model-specific procedure.

  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.

  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use diagnostics from built-in memory (run MDSCHED) or the utility memtest86 3rd - party to run plenty of evidence of hours of testing.
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.

  
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:

  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.

  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• you just bought a dvd, the hunger games, and it won't play.

  My laptop is a HP pavalion dv6 - 3227cl.  I just bought a Blue Ray disc of 'The Hunger Games'.  He will not play.  Smart Media software wants to look for an upgrade.  When update is downloaded and starts, I get a message that the software is already installed and I want to uninstall the program?  Should I do this or is it something else that I'm missing?

  Hello

  If you use HP MediaSmart DVD to read Blu - ray disc, try the following.

  HP now provides a version of PowerDVD 10 Cyberlinks which seems to be a better solution.  Download the latest installer for it on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56904.exe

  Once the download is complete, open windows control panel, open programs and features, make a right click the entry for HP MediaSmart DVD and select uninstall - when this process is complete, restart the laptop.

  When windows has reloaded, open your downloads folder and double-click Setup for PowerDVD 10 start the installation.  Once this done, see if your Blu - ray disc now plays OK.

  Kind regards

  DP - K

• My Win 7 said all the exe files that I download a virus and deletes it

  No matter what exe file I try to download it appears and says that he has a virus and deletes the file.  Gives me no options to go ahead and run the case.

  Niether win7 or IE will produce all this 'Virus '. msg... »

  The only app that will produce a msg saying 'Virus '.... "is your application antivirus or third-party plugin that is built into IE.

• When upgrading to Windows XP SP3, Windows 7, it loads the temporary files, and then I got an error message saying "the install.wim file does not exist.

  When the upgrade of xpsp3 for win 7 it loads the temporary files and 1 min in step 2? "" departure ": an error message appears that says install.wim file does not exist?

  original title: problem installing win 7

  Hello

  You can't upgrade Windows XP to Windows 7.

  Windows 7 upgrade paths

  This document describes the upgrade paths that are supported and not supported for editions of the Windows® operating system 7.

  Unsupported upgrade scenarios

  • Upgrade to Windows 7 from the following operating systems is not supported:
  • RTM of Windows 95, Windows 98, Windows Me, Windows XP, Windows Vista®, Windows Vista Starter, Windows 7 M3, Windows 7 beta, RC of Windows 7 or Windows 7 IDS
  • Windows NT® Server 4.0, Windows 2000 Server, Windows Server® 2003, Windows Server 2008 or Windows Server 2008 R2
  • Upgrades on place of several architectures (for example, x 86 to x 64) are not supported.
  • Place of cross-language upgrades (for example, en - us en - us) are not supported.
  • Cross-SKU upgrades (for example, Windows 7 N to Windows 7 K) are not supported.
  • Upgrades from Windows Vista to Windows N, Windows K, Windows KN or Windows E are not supported.
  • Upgrades on place of type Cross-compiling (for example, the fre to chk) are not supported.
  • Pre-release in place upgrades across milestones (for example, Windows 7 RC to Windows 7 RTM) are not supported.

  Supported upgrade scenarios

  Company	Professional, company, full
  Enterprise	Enterprise
  Home Basic	Home Basic, Home Premium, Ultimate
  Home Premium	Home Premium, ultimate edition
  Ultimate	Ultimate

  Enterprise	Enterprise
  Home Basic	Home Basic
  Home Premium	Home Premium
  Professional	Professional
  Starter (x 86 only)	Starter (x 86)
  Ultimate	Ultimate

  Home Basic	Home Premium, professional, ultimate edition
  Home Premium	Professional, ultimate edition
  Professional	Ultimate
  Starter	Home Premium, professional, ultimate edition

• My creation of DVD windows do not work

  When I try to burn a movie using win dvd, the program opens and allows me to load a file to burn and then it tells me that windows dvd maker has stopped working then he seeks a solution then it says no found soultion.
  Compaq Presario F700 laptop computer with windows vista home premium.

  Hi Ladydriver1366,

  Ø you are able to burn DVDs using other burning software?

  Try the following steps.

  Step 1

  Uninstall the third-party burning software as applicable and burn the DVD using DVD creation.

  Step 2

  1. Click on start toreduce this includes this image, type regedit in the Search box, and then click regedit in the list of programs . Collapse this includes this imageIf you are prompted for an administrator password or a confirmation, type your password or click continue.
  2. Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Warning There may be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.

  1. In the pane, click UpperFilters, and then click Remove.
  2. Click Yes to confirm the deletion of the UpperFilters registry entry.
  3. In the pane, click LowerFilters, and then click Remove.
  4. Click Yes to confirm the deletion of the LowerFilters registry entry.
  5. Exit the registry editor and restart the computer.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer]

• Creation of DVD could not decode the files

  Hello world. Another new guy!

  I also discovered DVD Maker. But I had all the problems in sucsession. First creation of DVD does not recognize the files, but with the help, as I arrived here, I overcame. Then, he did not find the DVD burner, but you guys saved me once again on this one. Now, once I have start burning .avi on DVD, after 1% weird files, it gives me a biggie, saying that one or more of the files that have been added can not be decoded properly. I know there are other people who had simmular problems, but I'm still at a loss. I have download a codec (just the codecs) package to solve the original problem, I myself for example not recougnizing files in the first place. I thought that would be enough.

  Please someone save me! :-) . I'm SO close from there...

  Hello

  Method 1 : give the Movie Maker clearly run by temporarily disabling all startup programs and Services of third party (non-Microsoft).

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Method 2 : try the system restore and the System File Checker program.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Method 3 : you can also install a codec pack and check if the problem is solved or not.

  http://www.free-codecs.com/download/K_Lite_Mega_Codec_Pack.htm

  WARNING of THIRD PARTY SOFTWARE : Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Also, check out the following links and see if the problem is resolved or not.

  DVD encode - comes in at 98.9% burned, then fails
  http://www.windowsdvdmaker.com/forums/thread/136.aspx

  Vista - creating Windows DVD fails at 99%
  http://www.Vistax64.com/Vista-music-pictures-video/198083-Windows-DVD-Maker-fails-99-a.html

  Do you have enough space on the DVD for the file, and you have the same amount of free space on the hard disk for the temporary work files (maybe even a little more)?

  This is a FAQ on the Codecs it's Vista related and interesting to read.

  Windows Vista codecs
  http://www.Windows-Vista-update.com/Windows_Vista_codecs.html

  Hope that helps.

• How can I activate images on the DVD in video file so that I can edit and send to people?

  Hello.  I recently transferred footage tape VCR to a gathering on a DVD of family.  How can I activate images on the DVD in video file so that I can edit and send to people?

  Any help would be appreciated, as I was chasing my tail for about an hour and a half now.

  Thank you!

  When you insert the DVD in your DVD player... close
  all the windows that can open and then go to... Start /.
  Computer... right click the icon for the DVD player
  is in, and then select or open Explorer.

  The files you need from the DVD are the. VOB files.
  You will find them in the VIDEO_TS folder. Copy them
  in a folder on your hard drive. Or you can copy the
  full VIDEO_TS folder.

  First... just try to rename one of the. VOB files to
  . MPG or. AVI and see if it will matter in Movie Maker.
  If import works... drag the file to the timeline and
  Economy/publication it to .wmv or .avi format. Then...
  Re - import new video film for editing purposes.
  (if you have Vista Home Premium or Ultimate, you)
  may be able to import the VOB files in Movie Maker
  as they are)

  (FWIW... you can probably play the files renamed
  in Windows Media Player to be sure that VOB
  file to edit)

  If you are unable to import the files they need to be converted
  another .wmv format would be a good choice.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Creation of DVD Windows closes when the file is moved to the work menu

  "try burning .avi files to dvd using create DVD windows and when I drag the file to the creation of dvd or even to open it manually through the import that it cancels and closes saying ' stopped working '.

  Hi emwercs,

  Follow the instructions below that may help you solve the problem of Windows DVD maker.

  Method 1:

  Create DVD Windows stops working due to incompatibility with one or several codec files that are obsolete or incompatible with the project or the DVD Maker software itself.

  (Obsolete or incompatible) Codec files must be located and renamed to resolve the issue.

  1. open the start menu and type event viewer in the start menu search bar. Open event viewer from the menu.
  2. in the case of Viewer click Windows logs in the left panel
  3. click on application under Windows Logs logs
  4. search for the error messages listed in the event viewer window Central Panel and double-click on the error to check if it log is linked to the creation of DVD.

  Example of error log:

  Signature of the problem
  Problem event name: APPCRASH
  Application name: DVDMaker.exe
  Application version: 6.0.6000.16386
  Application timestamp: 4549b5b0
  Fault Module name: nevideohd.ax
  Fault Module Version: 4.6.15.0
  Timestamp of Module error: 459bb828
  Exception code: c0000005
  Exception offset: 00008b 89
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1062

  5 locate the fault Module name, it must be a file with the extension or dll.
  6 once identified the name of the file, try to locate the file in the C:/Windows/System32 folder.
  (Please click on view the content if the files do not appear automatically).
  7. If the files are not listed in the System32 folder, find the file with search containing the files and system files.
  8 find the file and rename it.
  9. check if the problem persists. If the problem persists and the error message appears again, find the new file which is the origin of the problem of event, error log viewer.

  Method 2:

  You can also uninstall any third party burning programs and software of the codec of programs and features that these could cause the error.

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• The MTS files & Windows DVD creation (Windows 7 x 64)

  Question: Windows DVD Maker does not recognize the MTS format.
  Camera: Panasonic DMC - TZ7
  File format: MTS (AVCHD Lite HD)
  OS: Windows 7 x 64

  There are a few comments on the similar topic. I would like to know if there is some way I can get the creation of DVD to read MTS files without converting it to other formats.

  If I convert it, is it a tool of MS that I can use without buying a third-party tool 3. MTS format has been around for a while and I'm surprised that the creation of DVD in Windows 7 does not support.
  Vimal.

  Hello

  You must first convert AVCHD (.mts) .avi files or any other file format and then burn using Windows DVD creation. Create DVD does not recognize the format .mts and
  There are no Microsoft tool to convert the file formats.

  I suggest you to search using your favorite search engine. You will find many free online conversion tools.

  You can also check out this link of the thread to help:

  http://social.msdn.Microsoft.com/forums/en/accLabs/thread/908e52d0-EC01-4D5E-9ab5-62cdb37b24f6

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to convert dvd win7 with the ISO on my office installation files so that I can again use the iso file to make an installation key bootable win for my net book which has no dvd player.

  I bought a proffessional win7 genuine dvd of microsoft I received today. the dvd has no iso file but only installation files. I need to install win 7 on my dell inspiron mini 1018 10 net accounting that only has usb ports and no dvd support. So I want to use a microsoft tool (if it is possible to avoid 3rd party tools) and firstly convert the files in the bootable dvd into an iso file on my desktop which has the dvd player. so I want to use the iso file and use the windows download dvd tool from microsoft to make a bootable USB key and use it to install win 7 on my netbook usb ports. I need urgent links to the microsoft tool if it is available or any reliable free tool to convert DVDs to iso. Help, please

  You can use iSO recorder:

  ISO Recorder v3

• I copied the 2 files to a DVD movie and he changed the .m2ts file format and it is not supported by Windows Media Player. How to convert files in a file type supported?

  Original title: M2TS

  I copied the 2 files to a DVD movie and he changed the .m2ts file format and it is not supported by Windows Media Player.  How to convert files in a file type supported?

  Hello

  The files have already been burned on a DVD and therefore cannot be converted. However, you can download and install third-party codecs to play .m2ts files.

  Codecs: Frequently asked questions

  WARNING OF THIRD PARTY
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.