Issue numbering of lists

Similar Questions

• How to create a template in pages or numbers grocery list?

  How to create a template in pages or numbers grocery list?

  Create yourself as a standard document and save it. Then save it again as a model, where you can then reuse.

• How can I add a response at the end of each point of the issue in a list of questions and send back to the sender?

  I have emails that require some points to address such as "Please fix leak in the bathroom sink' and then the next line will be another application and so on. I would like to answer each question at the end of each line with a response (preferably in a different color to stand out police) such as "Yes - will fix" or "that cannot be done" or "you'll have to fix that yourself." So, I want to send this reply to the original sender.

  It is probably easiest to copy and paste the initial list of questions in your answer, first of all and then add your comments.

  If you have the problem that the list numbers change when you try to add your comment about a new line, try to make your line breaks using shift + enter instead of the entry.

• Numbering of lists. Makes me crazy.

  I have some notes at the end of a chapter, with 58 notes. I imported from Word in my file ID of 2015. The last numbers incoming were not working for me, so I deleted and define style paragraph to make a numbered list. That he does, but it numbers each note with the number '1 '. It's crazy. And I literally go to every note and choose "continue numbering" for numbers to be incremented. Why would he do that? I don't want to do this 58 times.

  Thank you.

  Never mind. I found it. In the style of paragraph, under numbered lists, it has been set to "start at" number 1. I changed that to "continued from previous number" and now they are all numbered properly. Odd, that. Of course, I want to start at number 1. So, why would not, by default, continue numbers from there? No matter what. I'm fine now. Thank you.

• Restart page numbering of lists in RTF model...

  I use the native features of MS Word to produce numbered lists. However, as indicated below, the following lists of the same types of elements reporter prospectively, rather than restart the numbering. Is it possible to use the native feature of MS Word for numbered lists or should I create a sequential variable and return between the grouped items? I use the BEEP, version 10.
  
  First series of elements
  Amount of text goes here:
  1 number 1
  2. article 2
  3 etc.
  
  Second series of elements
  Amount of text goes here:
  4 point 1
  5 point 2
  6 etc.
  
  Very much appreciated.
  
  Bryan

  Have you tried using the position() command. This command returns the check-in counter of the group. This would work in your situation?

  Use

  Thank you
  Bipuser

• Right-aligned numbers in lists numbered in the paragraph styles

  Is it possible (in InDesign 5.5) to create a numbered list in a paragraph style that makes the numbers right aligned, in order to align a two-digit number to the right, the space between the number and the text being equal whether a number of one or two digits? I can do it manually with two tabs, but the bullets & dialogue of numbering in paragraph Options of Style only allows for the position of a tab. It would be useful to be able to automate this type of numbering.

  http://InDesignSecrets.com/How-can-i-align-double-digits-in-a-numbered-list.php

• Activation / passivation issue: empty template list

  Hi guys,.

  I use jdev 11.1.1.6.0 and I have a strange behavior for this use case:

  I have on a screen, a simple table read-only synced to a form that is used to be able to update the data.

  In this form there is a list-based model (RichSelectOneChoice faces) which is normally directly fill in the data and in conditions normal case it works fine but

  When I disable put ApplicationModule in common in the configuration of the application module to test the bad situations, I have a problem.

  The arrival on the screen, it's OK. It appears when I select a row in the table or when I filter the table or sorting (I think an executeQuery effect)

  The list is empty (no line) and I have this message in the newspaper of the ADF:

  < FacesCtrlListBinding > < getInputValue > ADFv: could not find an item selected corresponding to the value 9 type oracle.jbo.domain.Number in the list of values (LOV).

  Normal because the list is empty after the action so he can't match the value selected in the LOV.

  I don't understand why the list is not full...

  someone has encounterd a such effect?

  Thanks for any help,

  David

  HI guys,.

  I find the reason, but I don't know exactly why...

  In your VO .xml file, you have a ViewAccessor tag associated with your LOV.

  By default, the RowLevelBinds property is set to true. My Watchlist has No bindvariable (that is to say, this list is the same for all lines) so I remove,

  After doing that I observed im my journal that the data in the list has been passivees in the XML file, and so on the interface of the interface user, the list has been correctly populated and non-empty as previously.

  Should we consider as a Bug of the ADF? Anyone has the explanation oh this behavior according to the definition of this property?

  Kind regards

  David

• Page numbers not listed is not in data merge Document?

  Hello, I hope someone can help. I am fairly new to InDesign, but a lot of learning.  I create a directory the about 200 pages (around 2800 records merged from .csv in InDesign 6). Everything works fine with the merger, except generating page numbers.  I tried to add page at the bottom of the page number to the master BEFORE merging. But if I do this, it greys on the 'multiple records per page' option when you try to run the data merge (using 'create a merged Document').  So, I tried to add the page number to the A-master after you HAVE created the merged document, but the page number does not appear on the pages.  There must be a way to do it, can anyone help?

  (FYI - to generate the automatic page numbering, I go to the Page current-markers-character number special Type-Insert and put that in a field of text at the bottom of the page.)  Thanks in advance. )

  I don't see a page number in the mask of law and all of your pages are pages on the right.

  Mike

• issue of active lists

  Hi all
  
  I want to know how to create a smart list and use it. I had to create content, but I am not able to use them. I want to use one of the Member of my consideration. can someone help me pls
  
  Cherkaoui

  Hi Haran,

  1. after that you had created active lists.

  2 Goto the account dimension member, click on 'change '.

  3. now go to the "data type" option, select 'smart list' got an option here.

  4. After you have selected, you can select the list created "smart" which is above "data type".

  5. now you can see the smart list in the data form (which has the account member)

  Sandeep Reddy, Enti
  HCC
  http://hyperionconsultancy.com/

• I paid for a new license key, but it keeps coming back that I have to buy a new license key.  I tried to contact customer abuse, but he doesn't seem to have the problem I am looking for in the list of issues.

  Hello

  I bought a license key last night for PS CS6, when I entered in the appropriate box, they say "the license key was invalid and that I had to buy another.»  Any suggestions for what to do next.  I tried to contact customer service, but it doesn't seem to be an issue in the lists for my problem.

  I'll be very grateful for any help in this regard

  Thank you

  Christine

  Looks like the host file prevents your computer to access our activation servers.

  Please see the advanced solutions to errors in connection with Adobe Creative Cloud and Creative Suite applications and reset your hosts file after step 2.

  Let us know if that helps.

  Kind regards

  Assani

• Lists of Word imported with numbers - how to make them disappear in a single shot?

  It is very annoying.

  I went through all the styles and deleted all the imported Word lists.

  I know that I can go to Type > bullets and numbers > define lists

  

  But you cannot select several them.

  And that pressing DELETE brings to the top

  

  Here's what my Panel looks like when I'll list:

  

  I just want to remove all together.

  One of the ideas?

  Ah I see, my proposed script deletes * all * lists. Try #2: put the name of your choice in the variable at the top, and it don't delete lists named 'Word imported... ". "and leave others alone.

  replaceWith = "blah";
  count = app.activeDocument.numberingLists.length-1;
  while (count > 0)
  {
    if (app.activeDocument.numberingLists[count].name.match(/^Word Imported/))
      app.activeDocument.numberingLists[count].remove(app.activeDocument.numberingLists.item(replaceWith));
    count--;
  }
  

• URGENT update for Thunderbird - mailing list is broken

  The most recent update to Thunderbird broke mailing lists. Trying to send a message to a list to get an error message. test dialog box is as follows:
  Invalid delivery address.
  [entry from the list on the 'To' line] is not an email address valid because it is not the form user@host. You need to fix it before you send the e-mail. »
  I tried to recreate the mailing list (49 names!), no change. I used this (and other mailing lists) for years, so I'm positive, that it ruptured during the last update to Thunderbird. I hope that you appoint it as a critical issue since mailing lists are a crucial function of a mail client. More I do several mailings a month to this list, and typing in 49 names each time by hand isn't funny (just finished with the message of today ' hui).
  Thank you, if possible I would like to comment on this so I know what to expect (I know you're busy).
  Using Mac OS 10.8.4, Thunderbird v. 31.1.0.

  I had a problem sending mail to a list that I had used successfully in Eudora. Imported from Eudora and it has not been accepted in Thunderbird with the above error message. My name of the list was of 2 words. I deleted the space between the 2 words and can now send mail to this list successfullly.

• Chapter page numbering problem

  AFTE 200 pages, chapter of Pages.app numbering begins to turn: instead of going 5.2.6 it again 1 and does not change even if I change the numbering of 'Start at last' to ' start to...» »

  I deleted & re-inserted chapter / section a dozen times now, don't break no change.

  Thank you very much for a tip!

  What is a Word document with chapter numbering that you opened in Pages? What specific version of Pages?

  V5.6.1 auto-incremental offer Pages, or Pages ' 09 chapter numbering, much less, multilevel numbering. Only automatic incremental hierarchical numbers are lists, but you can not enter live Start at: 5.2.7 as only integer values are allowed. There is no field "Start finally" input, checkbox or selection in Pages ' 09 or v5.6.1.

  Maybe the Pages ' 08 v3.0.3 that I have not? You specify the version of Pages claim to use.

• Blocking unwanted faxes from private numbers.

  How do install you the machine to block unwanted faxes from private numbers-no listed or unavailable.

  Hi smittie27,

  I misunderstood. No, you can't block faxes from unknown senders. I did some research, as I thought you might have a fax digital statement option. This would have enabled allows you to print faxes only you choose and all other faxes would be archived digitally. It turns out that this option is available for the high-end Officejet like the 8600.

  The only other thing I can think is to call your phone company. I wonder if they are able to block unknown numbers of campers through the fax line. I'm not sure whether they can do this or not, but it might be useful to call and ask.

  I'm sorry I don't have better news, but I hope that answers your request.

• Issue of ACL:Technical DMVPN TUNNEL ENTERING to Expert

  Hello

  I have a problems with an access list configured by ENTERING the Tunnel routers (HUB1 and HUB2) HUB interface.

  I enclose a simple drawing of my configuration:drawing-Lab - Setup.Jpeg

  Let me quickly explain my setup:

  • I have configureddual HUB and layout DOUBLE DMVPN
  • The phase 3 of DMVPN is configured and I'm using EIGRP
  • All traffic passes (including Internet) by location of HUB
  • All rays are configured with FVRF and receive only a default route HUB routers
  • Talk to traffic talk is possible and can be restricted if necessary by setting up a route to null on rays router
  • HUB1 is the main router and HUB2 is the backup router

  Security requirements:

  • Rays access the Internet through a HUB, and are allowed to access HTTP, HTTPS, FTP, and ICMP
  • Rays can reach everything by the location of the hub

  In order to meet the requirements of security and simplify the configuration on the shelves, I thought that I could set up an inbound access list on the tunnel interface to HUB1 and HUB2. So like that every time I have add a new talk that I don't have to set up more lines in the config spoke. I enclose the access list that I have configured on HUB1 and HUB2 and also the configuration of the tunnel interface (only for HUB1, HUB 2 is the same).

  DMVPN-TunnelIN-Acl-and - TunnelConf.txt

  My isssue starts here. When I apply the access list that is called DMVPN_INSIDE_IN in the interface of tunne, rays can ping the location of the hub, no problem. The question is when a host talks try to access Internet (ping 192.168.100.2) in this case 200.200.200.200 (see drawing) the access list refuse the package by saying the following:

  % S 6-IPACCESSLOGDP: DMVPN_INSIDE_IN icmp 80.10.10.2-> 200.200.200.200 denied (8/0), list 1 packet

  But the firewall doesn't actually see the good address before being natted source:

  
  

  % SESS_AUDIT_TRAIL_START-6-FW: start session icmp: initiator (192.168.100.2:8) - answering machine (200.200.200.200:0)

  If I remove the access list everything works fine! It seems that the access list inspects the package after the NAT process. Actually sometimes works sometimes not. If I remove the access list and put it back again 192.168.100.2 can ping 200.200.200.200 without problem.

  While I don't understand, is how I can apply the access list to the tunnel interface? He's not leaving instead of INBOUND, wouldn't? I don't really understand the process of Cisco IOS here. How the read in this case Tunnel Interface?

  Any ideas what is going on here?

  Best regards

  Laurent

  Laurent,

  Seems to be related to the CEF, and then (at least for me not knowing too much about). No doubt now a valid contiguity is installed and it will work until it is removed from the FIB for some reason any.

  A good test would be to check if it will continue to work after you remove and add the cef or is just a minor issue with access lists.

  Marcin