Restart page numbering of lists in RTF model...

Similar Questions

• RH9. How do I restart page numbering in a multilevel list

  My goal is to achieve the following objectives:

  1 jlfjlsjflsfjslfj

  2 sfjslfjs f sjflworuworuw

  ruwojsflsuwopr a.

  fsfwrwo b.

  3 fowrfsjflsjrw

  4 fsrwrw

  fswrrwv a.

  wrworuworuw b.

  c. wrwoumwrw

  I use a Style called list numbered. For the subset, I select "Start at level 2 List".

  'Step 4' now has sub-steps "d", "e" and "f" below but I can't find a way to make the second set of subsets of restart once again on "a".

  I've tried right-clicking on the first stage in the second set (e.g. in 4A), by selecting bullets and numbers, then the tab numbers, by selecting the icon of a. c. b. and setting the restart numbering at 1. The stage now has an 'a', but the police and the dashes are all wrong.

  (I have not create the CSS or the list styles, but have tried to figure it out by searching the forum, help and the wonderful site of Peter G..) »)

  All thoughts welcome.

  
  Carol

  I think that the question is about the sub not restart in A rather than creating them in the first instance.

  Logically, you right-click and choose Bullets and numbers and restart, except that has a bug.

  Right click and select list Styles. You can restart page numbering. Don't worry if it says 1 instead of A. The reset resets to A.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Notes - restart page numbering for each chapter (workaround)

  Hi all

  As far as I know, there is no way how to reset the reference numbering in ID CS4 (it would be ideal to have any possibility to choose the paragraph style, which could rely on that). Available only three options are available for the reset, all IMHO quite useless for documents faces double - pages numbered page and division (I located him so the names may differ). My chapters always starts on the front page. If the individual "divisions" would be created for each chapter and reset at the beginning of each division, as the division starts on the back page! (cannot be changed), it resets the previous chapter reference numbers, if they appear on this page at the back. But I agree that for documents single side, this option would be sufficient for me.

  Is there no workaround solution how to restart notes with each chapter numbering in the double faces documents? It could be scripted? I really need it...

  Kind regards

  Jan

  Hang on, I think I got it.

  When you're paging the regularly in your document, you use Alt + Pg. Prev / Alt + PgDown (Previous Spread) InDesign always selects the current spread. When you use SHIFT + PG. PREC and Shift + PgDown screen irritating jumps from the left to the right, so I do not use it, but it's the right page selected in the Pages panel.

  The difference is, when propagation is selected in the Pages panel, the new Section is automatically applied to the first (= left) page in which spread.

  If you right click on the page in the Pages panel, where do you want to actually start the new section, it will always apply to the correct. (And if you're a keyboard jockey, first navigate to the correct spread, then press on shift + page down once to get the point on the right page-- right.)

• Page numbers not listed is not in data merge Document?

  Hello, I hope someone can help. I am fairly new to InDesign, but a lot of learning.  I create a directory the about 200 pages (around 2800 records merged from .csv in InDesign 6). Everything works fine with the merger, except generating page numbers.  I tried to add page at the bottom of the page number to the master BEFORE merging. But if I do this, it greys on the 'multiple records per page' option when you try to run the data merge (using 'create a merged Document').  So, I tried to add the page number to the A-master after you HAVE created the merged document, but the page number does not appear on the pages.  There must be a way to do it, can anyone help?

  (FYI - to generate the automatic page numbering, I go to the Page current-markers-character number special Type-Insert and put that in a field of text at the bottom of the page.)  Thanks in advance. )

  I don't see a page number in the mask of law and all of your pages are pages on the right.

  Mike

• [JS] restart page numbering of numbered lists?

  I received a document with numbered lists and bulleted.

  The data is imported from XML.

  The numbering continues from one list to the other.

  How can I reset the numbering?

  I use JavaScript.

  Find paragraphs, this is not a problem...

  I have it

  myPara.numberingContinue = true/false;

• RH11: Restart page numbering does not

  More HR issues:

  When I have two (or more) lists numbered in the same section, continuous numbering from one list to the other - instead of restarting at the 1. Even when I access the bullets and numbers dialog box, select the check box restart numbering to and set the value to 1 - nothing changes. The numbering continues from the previous numbered list (defined as a paragraph style).

  Is this a know bug? Are there alternatives?

  Thanks in advance.

  After scouring the HTML code of subjects who have a correct numbering, I found the solution:

  list-style: rh-list;"?>

  Click Add a filter.

  Start = "1" attribute does the trick. I don't understand why using the bullets and Numbering dialog box not adding the attribute.

• How to create a template in pages or numbers grocery list?

  How to create a template in pages or numbers grocery list?

  Create yourself as a standard document and save it. Then save it again as a model, where you can then reuse.

• Page number of reset in Word RTF model for the generation of PDF Editor BI

  Hello!
  Apex Oracle 10.2.0.4, BEEP 10.1.X 4.0.2
  
  I was told to transfer this forum topic.
  
  Bills are created based on the Word RTF with BI Publisher files. Resulting file is a large PDF file, that has a lot of pages.
  Word RTF model is bundled in field BILLS.ID with the page break option. Thus, a BILLS.ID group can have one or several pages (according to the data).
  
  How to create the model RTF (for generation of PDF BI Publisher) with reset page numbers when changing the value of consolidation.
  Page numbers are at the bottom of the page in the format
  curr_group_page/total_group_pages
  where:
  -curr_group_page is the number of the current page group (defined with the BILLS.ID field),
  -total_group_pages is the total number of pages in a group (defined with the BILLS.ID field).
  
  I need to reset the numbering at each change of BILLS.ID (Group).
  Example:
  ID = 1 (4 pages)
  1/4, 2/4, 3/4, 4/4
  ID = 2 (1 pages)
  1/1
  ID = 3 (2 pages)
  1/2, 2/2
  ID = 4 (3 pages)
  1/3, 2/3, 3/3
  etc.
  
  How to achieve this type of numbering?
  
  Any help appreciated.
  
  Kind regards
  Damir Vadas
  
  P. S.
  Have found something like the number of page in publisher bi but I want to get this file on the mail if possible (to see the real value).

  Hello

  Use
  
  to reset the numbering of the pages for sections.

  Concerning
  Angelique

• Exit Excel does not not the headers on each page of the rtf model

  Hi all

  I have an rtf template where I used a title in the header section. This repeats outputs in PDF and RTF. But output Excel it is not repeated.

  This is an expected behavior. If it's... does perform a work around...

  enjoy all the entries on this...

  Best regards

  gt1942

  AFAIK, you can't repeat the page output to Excel headers using RTF model.

  Excel page headers can be repeated for each page using Excel template.

• The Bookmark Script list align Page numbers on the right

  Hello

  I have a script that lists the names of bookmark, and then the Page number after the bookmark as follows:

  Bill Smith #1

  Jeffrey Jones Page #5

  Christopher James Page #8

  What I would like the script to achieve is to list the bookmarks and then align Page numbers to the right of the pdf instead of mixed together.

  Please can someone tell if it is possible to do it in javascript?

  The existing code is as follows:

  / * All bookmarks in the list * /.
  / * Work recursive l‟arbre bookmark * /.
  function PrintBookmarks (bm, nLevel)
  {
  If (nLevel! = 0) {/ / do not print the root}
  bmReport.absIndent = bmTab *(nLevel-1);
  BM. Execute();
  bmReport.writeText ("" + bm.name + "Page"+ (bm.doc.pageNum + 1) ");

  }
  If (bm.children! = null)
  for (var i = 0; i < bm.children.length; i ++)
  PrintBookmarks (bm.children [i], nLevel + 1);
  }
  bmTab = 20;
  bmReport = new Report();
  bmReport.size = 2;
  bmReport.writeText (this.title);
  bmReport.writeText("");
  bmReport.size = 1.5;
  bmReport.writeText ("list bookmarks");
  bmReport.writeText("");
  bmReport.size = 1;
  PrintBookmarks (this.bookmarkRoot, 0);
  global.bmRep = bmReport;  do global
  global.wrtDoc = app.setInterval)
  "Try {'} '.
  +' reportDoc = global.bmRep.open ("list bookmarks"); "
  "+' console.println ("open Executed");"
  + "app.clearInterval (global.wrtDoc);"
  +' delete global.wrtDoc;'
  "+' console.println ("App.clearInterval Executed");"
  + "reportDoc.info.title = 'Bookmarks lists';"
  + "reportDoc.info.Author ="Bookmark Sequence list";"
  {+'} catch (e) {console.println ("Meanwhile...:" + e) ";}"}
  (100);

  Any help will be much appreciated

  The purpose of the report is seriously flawed. Beside the known bug page break in version 9 there are many other issues, such as the issue of alignment.

  The best solution I found that it was to place the page numbers on a new line then align them with dash and raise.

• Page footer for rtf model number

  Hello
  I have a requirement to display the page number in a pdf output (from rtf model) in the following format
  
  Let's say I have 5 pages of generated pdf rtf model report
  
  where the page number must be in the following format
  
  Page 1-> 1
  
  Page 2-> 0
  
  page3-> 0
  
  page4-> 0
  
  page5-> 2
  
  
  I tried with the page break option in rtf models. But luck favors not... Please help me
  
  
  Thank you
  Angelique Varanasi

  Hi, I am also looking similar requirements.

  My requirement is:

  If the result is only a single page, page needs 2.

  If the output is more than one page, 1st page has display 1 and 2nd page display 2.

  If the output is more than 2 pages, 1st page has display 1, 2nd page display 0 and page 3 2.

  If the output is more than 3 pages, 1st page--> 1,
  2nd page--> 0,
  3rd page--> 0,
  and the last page--> 2

  This menas if the output is more than 3 pages, then 1 page 1, page 2, all means pages 0.

  can anyone help on this requirement.

  Thank you
  Rama...

• Restart the numbering of the pages for the exported PDF files

  So I have a book with multiple indd file. I am wanting to export each of these co-operate towards their own PDF, but the numbering reflects the section of the book that is. Is there something I'm missing? Can I set each PDF export as page 1? We do not want to confuse our customers when they open a page 3 PDF that says they are on page 22.

  When you synchronize the numbering in a book he changes number assignments in the component files. in your situation, I probably put the pages of the original of the files in new .indd docs and crops off the original page numbers, adding new numbers on the new master file pages. This allows you to make all your changes in the original file and just update the second link of file when something is changed.

  "" You will find a useful script to InDesignSecrets "Blog Archive" Zanelli releases MultiPageImporter for importing PDF and INDD files

• I can not display the page numbers of my books

  I want to sort my books pdf by number of pages, but when I add this detail (Pages) in the folder the whole column is empty.

  How can I get page numbers to display?
  I tried the following far with the following results:
  1. the folder does not give me the ability to edit the details of the file when I right click on it so I can't enter the page numbers manually.
  2. when I right click and check the properties of the available tabs are general, sharing and customize.  Customize tab only allows me to change the folder icon.
  3 when I select the properties of one of the pdf books in the folder tabs only I get are general, Pdf, and resume and I am unable to add the page number, use one of these tabs as well.
  4. I downloaded 'Quick pdf tools' that allows me to be able to change the pdf information because I thought that the reason why the column is empty is because the PDF itself does not page number filled in, but by viewing the properties with this tool, I am able to see that the page numbers for all the pdf files are listed (and can not be changed) so I don't understand not why the column for pages shows blank in the windows folder.
  What I resorted to that adds the keywords column to the file and write the page numbers in this column because the information I enter in this field will appear in the windows folder column.  I have a number of books, and it's a little disheartening to think that I must do this for each book when the information is already there for example the page number.
  So, if anyone can let me know what I can do to make the Pages column displays the number of pages rather than remain just an empty column, I would be very grateful.

  See if the following help to view pages:

  1. in a folder, choose 'View' - 'choose details '.

  2. a dialog box "Choose details" will appear. From there, you will have many options, listed here in alphabetical order:

  * Title of the album
  * Artist
  * Attributes
  * Audio sampling rate
  * Audio sample size
  * Author
  * Flow
  * Camera model
  * Category
  * Channels
  * Comments
  * Company
  Author's rights
  * Date of access
  * Date of creation
  * Update
  * Date photograph
  * Description
  * Dimensions
  * Duration
  * Name of the episode
  * Version of the file
  * Type
  * Keywords
  * Name
  * Owner
  * Pages
  * Product name
  * Product version
  * Description of the program
  * Protected
  * Size
  * Status
  * Topic
  * Title
  Track number
  * Type
  * Year

  Naturally, some of these options do not make sense for all folders. But for those who have a sense, check the boxes next to the details you want to see.

  If you want to move an element upwards or downwards in the list (higher appear to the left in "Détails" view), click on the item in question and press the 'Move up' and 'down '.

  I hope this helps.

• RTF model - export in XML format

  Hello

  I used the RTF model to generate the report.

  I want to see the report in XML.

  But, I do not understand this option in the "report seen as ' or 'export report AS".

  Can you please help?

  Attach the screenshot

  Thank you

  You must add XML as output at your disposal.

  Please follow this

  1 - click on "Edit" report

  Top of page 2 to right - click "View as List".

  3. in the output formats - add "data (XML)."

  Screenshot for your reference

  

• Page numbering and the Table of contents

  I have a book containing 23 document files. Document files contain the page numbers in the footer.

  One of the document file is a generated table of contents (TOC). Unfortunately, the generated page

  the number in the table of contents do not match the numbering of the pages in the files. Here are the details:

  • The title page, in a file by itself, is not numbered
  • The frontmatter, distributed in five cases use lowercase Roman (i - xvi)
  • The body of the text in the remaining 17 files is digital (1-243)
  • The generated TOC uses cardinal numbers of the book as a whole. For example,.
    Chapter I is numbered correctly in the footer from page 1. However, he is listed in the table of contents
    as starting on page 19, because this is the file real 19th in the book. I put the document numbering
    This file from 1 properties and properties of Page numbering for the book as a whole to
    be "continue."
  • The style of the table of contents entries is correct. In other words, the frontmatter uses a tiny Roman and the
    chapters use Numeric

  I tried to regenerate the table of contents, but this did not help.

  Does anyone have suggestions on what is the way prescribed to do?

  OK, I continued to read and this is what I found:

  Set the numbering style in the document, and not in the book that we told you. Format > Document > numbering. Choose Arabic or digital. Repeat for the various chapters.

  

  Save and close the chapters. In the book file, click with the right button on each chapter and choose Configure XXX. This is where tell you the book to continue the page numbering or restart at the 1.

  

  Once this is done, update your address. From there, if there are issues, we rely on the logic of the Fm we use every day, and each of us can help you solve.